scholarly journals A Scalable and Accurate Method for Quantifying Vector Genomes of Recombinant Adeno-Associated Viruses in Crude Lysate

2017 ◽  
Vol 28 (3) ◽  
pp. 139-147 ◽  
Author(s):  
Jianzhong Ai ◽  
Raed Ibraheim ◽  
Phillip W.L. Tai ◽  
Guangping Gao
Keyword(s):  
Accurate Method ◽  
Crude Lysate

Application of Lattice Imaging Techniques to Amorphous Films

1975 ◽  
Vol 33 ◽  
pp. 8-9
Author(s):  
S. R. Herd ◽  
P. Chaudhari
Keyword(s):  
Nearest Neighbor ◽  
Random Network ◽  
Imaging Techniques ◽  
Network Models ◽  
Accurate Method ◽  
Direct Transmission ◽  
Lattice Imaging ◽  
Transmission Electron ◽  
Lattice Planes ◽  
Nearest Neighbor Distances

Electron diffraction and direct transmission have been used extensively to study the local atomic arrangement in amorphous solids and in particular Ge. Nearest neighbor distances had been calculated from E.D. profiles and the results have been interpreted in terms of the microcrystalline or the random network models. Direct transmission electron microscopy appears the most direct and accurate method to resolve this issue since the spacial resolution of the better instruments are of the order of 3Å. In particular the tilted beam interference method is used regularly to show fringes corresponding to 1.5 to 3Å lattice planes in crystals as resolution tests.

The effect of temperature on high-resolution TEM image contrast

1995 ◽  
Vol 53 ◽  
pp. 640-641
Author(s):  
T. Geipel ◽  
W. Mader ◽  
P. Pirouz
Keyword(s):  
Form Factor ◽  
Inelastic Scattering ◽  
Accurate Method ◽  
Waller Factor ◽  
Effect Of Temperature ◽  
Specimen Thickness ◽  
Influence Of Temperature ◽  
Debye Waller Factor ◽  
Influence Of Temperature On ◽  
Atomic Form Factor

Temperature affects both elastic and inelastic scattering of electrons in a crystal. The Debye-Waller factor, B, describes the influence of temperature on the elastic scattering of electrons, whereas the imaginary part of the (complex) atomic form factor, fc = fr + ifi, describes the influence of temperature on the inelastic scattering of electrons (i.e. absorption). In HRTEM simulations, two possible ways to include absorption are: (i) an approximate method in which absorption is described by a phenomenological constant, μ, i.e. fi; - μfr, with the real part of the atomic form factor, fr, obtained from Hartree-Fock calculations, (ii) a more accurate method in which the absorptive components, fi of the atomic form factor are explicitly calculated. In this contribution, the inclusion of both the Debye-Waller factor and absorption on HRTEM images of a (Oll)-oriented GaAs crystal are presented (using the EMS software.Fig. 1 shows the the amplitudes and phases of the dominant 111 beams as a function of the specimen thickness, t, for the cases when μ = 0 (i.e. no absorption, solid line) and μ = 0.1 (with absorption, dashed line).

Improving diagnosis of acute appendicitis with atypical findings by Tc-99m HMPAO leukocyte scan

2002 ◽  
Vol 41 (01) ◽  
pp. 37-41 ◽  
Author(s):  
S. Shung-Shung ◽  
S. Yu-Chien ◽  
Y. Mei-Due ◽  
W. Hwei-Chung ◽  
A. Kao
Keyword(s):  
Acute Appendicitis ◽  
False Positive ◽  
False Positive Rate ◽  
Accurate Method ◽  
Clinical Findings ◽  
Pathological Findings ◽  
Lower Quadrant ◽  
Predictive Values ◽  
Positive Rate

Summary Aim: Even with careful observation, the overall false-positive rate of laparotomy remains 10-15% when acute appendicitis was suspected. Therefore, the clinical efficacy of Tc-99m HMPAO labeled leukocyte (TC-WBC) scan for the diagnosis of acute appendicitis in patients presenting with atypical clinical findings is assessed. Patients and Methods: Eighty patients presenting with acute abdominal pain and possible acute appendicitis but atypical findings were included in this study. After intravenous injection of TC-WBC, serial anterior abdominal/pelvic images at 30, 60, 120 and 240 min with 800k counts were obtained with a gamma camera. Any abnormal localization of radioactivity in the right lower quadrant of the abdomen, equal to or greater than bone marrow activity, was considered as a positive scan. Results: 36 out of 49 patients showing positive TC-WBC scans received appendectomy. They all proved to have positive pathological findings. Five positive TC-WBC were not related to acute appendicitis, because of other pathological lesions. Eight patients were not operated and clinical follow-up after one month revealed no acute abdominal condition. Three of 31 patients with negative TC-WBC scans received appendectomy. They also presented positive pathological findings. The remaining 28 patients did not receive operations and revealed no evidence of appendicitis after at least one month of follow-up. The overall sensitivity, specificity, accuracy, positive and negative predictive values for TC-WBC scan to diagnose acute appendicitis were 92, 78, 86, 82, and 90%, respectively. Conclusion: TC-WBC scan provides a rapid and highly accurate method for the diagnosis of acute appendicitis in patients with equivocal clinical examination. It proved useful in reducing the false-positive rate of laparotomy and shortens the time necessary for clinical observation.

Detection of Mycobacterium tuberculosis in smear negative sputum by PCR

2012 ◽  
Vol 6 (2) ◽  
pp. 2-6 ◽  
Author(s):  
Mohammad Jobayer ◽  
SM Shamsuzzaman ◽  
Kazi Zulfiquer Mamun
Keyword(s):  
Mycobacterium Tuberculosis ◽  
Pulmonary Tuberculosis ◽  
Accurate Method ◽  
Major Health Problem ◽  
Major Health ◽  
Tuberculosis Patients ◽  
Diagnostic Potential ◽  
Total Death ◽  
Smear Negative ◽  
Negative Sputum

Pulmonary tuberculosis is a major health problem in Bangladesh that is responsible for about 7% of total death in a year. This study was conducted to isolate and identify Mycobacterium tuberculosis from sputum and to evaluate the efficacy of PCR as a modern diagnostic tool, for diagnosis of pulmonary tuberculosis, especially in the smear negative cases. One hundred and fifty suspected pulmonary TB patients (male/ female: 97/53) were included in this study. Single morning sputum was collected from each patient and diagnostic potential of PCR was compared with staining and culture. Twenty five (16.7%) sputum were positive by ZN stained smear. Among 125 smear negative samples, 13 (10.4%) yielded growth in culture in LJ media and 21 (16.8%) samples were positive by PCR. The sensitivity and specificity of PCR in smear negative cases was 100% and 92.9% respectively. Mean detection time in PCR was 24 hours. PCR detected M. tuberculosis in 21 smear negative and 9 culture negative samples. For diagnosis of tuberculosis in smear negative cases, PCR directly from sputum was a very sensitive and accurate method. In conclusion, PCR may be done, especially in clinically suspected pulmonary tuberculosis patients who remain negative by conventional methods.DOI: http://dx.doi.org/10.3329/bjmm.v6i2.19368 Bangladesh J Med Microbiol 2012; 06(02): 2-6

Accurate Method for Calculating the Effective Capacitance with RC Loads Based on the Thevenin Model

2009 ◽  
Vol E92-A (10) ◽  
pp. 2531-2539 ◽  
Author(s):  
Minglu JIANG ◽  
Zhangcai HUANG ◽  
Atsushi KUROKAWA ◽  
Shuai FANG ◽  
Yasuaki INOUE
Keyword(s):  
Accurate Method ◽  
Effective Capacitance

Peran Badan Pengendalian Dampak Lingkungan dalam Pengendalian Dampak Pencemaran Kegiatan Industri di Kota Batam tahun 2011-2014

2015 ◽  
Vol 14 (1) ◽  
pp. 20
Author(s):  
Wan Asrida ◽  
Dian Arival Aryadana
Keyword(s):  
Environmental Impact ◽  
Environmental Pollution ◽  
Pollution Control ◽  
Control Agency ◽  
Accurate Method ◽  
Industrial Activity ◽  
Research Issues ◽  
Negative Effect ◽  
Research Show

This research is intended to find out the role of the regional environmental impact Control Agency of Batam City against the environmental problems that occur in industrial areas namely, Batam city, concerning sustainable development based upon the environment, the activities of the industry now aims to build an economic sector but has a negative effect that is the pollution of the environment. In this case in Batam city frequent occurrence of environmental pollution caused by industrial activity namely with disposal of waste which are not in place. This research is focused on environmental impact Control Agency area of Batam city authorities in the control of the environment . With the outline of the research issues namely how environmental impact Control Agency the role of the Regions in the control of pollution of the environment against industrial activity in Batam city in 2011-2014 and the factors restricting the role of the regional environmental impact Control Agency in controlling environmental pollution in Batam city in 2011-2014.Type of this research is a descriptive i.e. researchers provide a description and overview of the phenomenon or social symptoms examined by independent variables described in a systematic and accurate. Method of data collection is done by means of interviews and the documentation.The results of this research show that the role of environmental impact Control Agency area of Batam city in pollution control against industrial activity carried out according to its function but have not run well in accordance with the goals and targets that have been set. This is not in accordance with the duties and functions of the regional environmental impact Control Agency of Batam city, resulting in less the maximum role of Bapedalda itself in controlling pollution that occurred in Batam city. So it should be should be able to stake Bapedalda holder which is professional in the discharge of pollution control and must be capable of tackling the obstacles faced.

Development of an HPLC-UV Method for Quantification of Stattic

2019 ◽  
Vol 15 (6) ◽  
pp. 568-573
Author(s):  
Soheil Sedaghat ◽  
Ommoleila Molavi ◽  
Akram Faridi ◽  
Ali Shayanfar ◽  
Mohammad Reza Rashidi
Keyword(s):  
High Performance ◽  
Accurate Method ◽  
Plasma Samples ◽  
Promising Target ◽  
Relative Standard ◽  
Dimerization Inhibitor ◽  
Oncogenic Protein ◽  
First Time ◽  
Transcription 3

Background: Signal transducer and activator of transcription 3 (STAT3), an oncogenic protein found constitutively active in many types of human malignancies, is considered to be a promising target for cancer therapy. Objective: In this study for the first time, a simple and accurate method has been developed for the determination of a STAT3 dimerization inhibitor called stattic in aqueous and plasma samples. Methods: A reverse-phase high-performance liquid chromatography (RP-HPLC) composed of C18 column as stationary phase, and the mixture of acetonitrile (60%) and water (40%) as mobile phase with a UV detection at 215 nm were applied for quantification of stattic. The developed method was validated by Food and Drug Administration (FDA) guideline. Results: The method provided a linear range between 1-40 and 2.5-40 µg mL-1 for aqueous and plasma samples, respectively, with a correlation coefficient of 0.999. The accuracy (as recovery) of the developed method was found to be between 95-105% for aqueous medium and 85-115% for plasma samples. The precision (as relative standard deviation) for aqueous and plasma samples was less than 6% and 15%, respectively. The sensitivity of the developed method based on FDA guideline was 1 µg mL-1 for aqueous and 2.5 µg mL-1 for plasma samples. Conclusion: These results show that the established method is a fast and accurate quantification for stattic in aqueous and plasma samples.

Is it necessary to calculate Young’s modulus in AFM nanoindentation experiments regarding biological samples?

2020 ◽  
Vol 12 ◽  
Author(s):  
S.V. Kontomaris ◽  
A. Malamou ◽  
A. Stylianou
Keyword(s):  
Young’S Modulus ◽  
Biological Samples ◽  
Young's Modulus ◽  
Reference Sample ◽  
Nonlinear Behavior ◽  
Accurate Method ◽  
Accurate Solution ◽  
Hertz Model ◽  
Work Done

Background: The determination of the mechanical properties of biological samples using Atomic Force Microscopy (AFM) at the nanoscale is usually performed using basic models arising from the contact mechanics theory. In particular, the Hertz model is the most frequently used theoretical tool for data processing. However, the Hertz model requires several assumptions such as homogeneous and isotropic samples and indenters with perfectly spherical or conical shapes. As it is widely known, none of these requirements are 100 % fulfilled for the case of indentation experiments at the nanoscale. As a result, significant errors arise in the Young’s modulus calculation. At the same time, an analytical model that could account complexities of soft biomaterials, such as nonlinear behavior, anisotropy, and heterogeneity, may be far-reaching. In addition, this hypothetical model would be ‘too difficult’ to be applied in real clinical activities since it would require very heavy workload and highly specialized personnel. Objective: In this paper a simple solution is provided to the aforementioned dead-end. A new approach is introduced in order to provide a simple and accurate method for the mechanical characterization at the nanoscale. Method: The ratio of the work done by the indenter on the sample of interest to the work done by the indenter on a reference sample is introduced as a new physical quantity that does not require homogeneous, isotropic samples or perfect indenters. Results: The proposed approach, not only provides an accurate solution from a physical perspective but also a simpler solution which does not require activities such as the determination of the cantilever’s spring constant and the dimensions of the AFM tip. Conclusion: The proposed, by this opinion paper, solution aims to provide a significant opportunity to overcome the existing limitations provided by Hertzian mechanics and apply AFM techniques in real clinical activities.

Sign in / Sign up

Export Citation Format

Share Document