scholarly journals Measurements of forces produced by the mitotic spindle using optical tweezers

2013 ◽  
Vol 24 (9) ◽  
pp. 1375-1386 ◽  
Author(s):  
Jessica Ferraro-Gideon ◽  
Rozhan Sheykhani ◽  
Qingyuan Zhu ◽  
Michelle L. Duquette ◽  
Michael W. Berns ◽  
...  
Keyword(s):  
Optical Tweezers ◽  
Mitotic Spindle ◽  
Theoretical Calculations ◽  
Single Point ◽  
Spindle Pole ◽  
Chromosome Movement ◽  
Speed Of Light ◽  
Spindle Poles ◽  
Ptk2 Cell ◽  
Chromosome Movements

We used a trapping laser to stop chromosome movements in Mesostoma and crane-fly spermatocytes and inward movements of spindle poles after laser cuts across Potorous tridactylus (rat kangaroo) kidney (PtK2) cell half-spindles. Mesostoma spermatocyte kinetochores execute oscillatory movements to and away from the spindle pole for 1–2 h, so we could trap kinetochores multiple times in the same spermatocyte. The trap was focused to a single point using a 63× oil immersion objective. Trap powers of 15–23 mW caused kinetochore oscillations to stop or decrease. Kinetochore oscillations resumed when the trap was released. In crane-fly spermatocytes trap powers of 56–85 mW stopped or slowed poleward chromosome movement. In PtK2 cells 8-mW trap power stopped the spindle pole from moving toward the equator. Forces in the traps were calculated using the equation F = Q′P/c, where P is the laser power and c is the speed of light. Use of appropriate Q′ coefficients gave the forces for stopping pole movements as 0.3–2.3 pN and for stopping chromosome movements in Mesostoma spermatocytes and crane-fly spermatocytes as 2–3 and 6–10 pN, respectively. These forces are close to theoretical calculations of forces causing chromosome movements but 100 times lower than the 700 pN measured previously in grasshopper spermatocytes.

scholarly journals Stu1p Is Physically Associated with β-Tubulin and Is Required for Structural Integrity of the Mitotic Spindle

2002 ◽  
Vol 13 (6) ◽  
pp. 1881-1892 ◽  
Author(s):  
Hongwei Yin ◽  
Liru You ◽  
Danielle Pasqualone ◽  
Kristen M. Kopski ◽  
Tim C. Huffaker
Keyword(s):  
Mitotic Spindle ◽  
Structural Integrity ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Yeast Saccharomyces Cerevisiae ◽  
Spindle Poles ◽  
Balance Of Forces ◽  
Related Proteins ◽  
Β Tubulin

Formation of the bipolar mitotic spindle relies on a balance of forces acting on the spindle poles. The primary outward force is generated by the kinesin-related proteins of the BimC family that cross-link antiparallel interpolar microtubules and slide them past each other. Here, we provide evidence that Stu1p is also required for the production of this outward force in the yeast Saccharomyces cerevisiae. In the temperature-sensitive stu1–5mutant, spindle pole separation is inhibited, and preanaphase spindles collapse, with their previously separated poles being drawn together. The temperature sensitivity of stu1–5 can be suppressed by doubling the dosage of Cin8p, a yeast BimC kinesin–related protein. Stu1p was observed to be a component of the mitotic spindle localizing to the midregion of anaphase spindles. It also binds to microtubules in vitro, and we have examined the nature of this interaction. We show that Stu1p interacts specifically with β-tubulin and identify the domains required for this interaction on both Stu1p and β-tubulin. Taken together, these findings suggest that Stu1p binds to interpolar microtubules of the mitotic spindle and plays an essential role in their ability to provide an outward force on the spindle poles.

scholarly journals Cell shape impacts on the positioning of the mitotic spindle with respect to the substratum

2015 ◽  
Vol 26 (7) ◽  
pp. 1286-1295 ◽  
Author(s):  
Francisco Lázaro-Diéguez ◽  
Iaroslav Ispolatov ◽  
Anne Müsch
Keyword(s):  
Mitotic Spindle ◽  
Cell Shape ◽  
Spindle Assembly Checkpoint ◽  
Mdck Cells ◽  
Spindle Pole ◽  
Spindle Orientation ◽  
Cell Cortex ◽  
Spindle Positioning ◽  
Spindle Poles ◽  
Spindle Position

All known mechanisms of mitotic spindle orientation rely on astral microtubules. We report that even in the absence of astral microtubules, metaphase spindles in MDCK and HeLa cells are not randomly positioned along their x-z dimension, but preferentially adopt shallow β angles between spindle pole axis and substratum. The nonrandom spindle positioning is due to constraints imposed by the cell cortex in flat cells that drive spindles that are longer and/or wider than the cell's height into a tilted, quasidiagonal x-z position. In rounder cells, which are taller, fewer cortical constraints make the x-z spindle position more random. Reestablishment of astral microtubule–mediated forces align the spindle poles with cortical cues parallel to the substratum in all cells. However, in flat cells, they frequently cause spindle deformations. Similar deformations are apparent when confined spindles rotate from tilted to parallel positions while MDCK cells progress from prometaphase to metaphase. The spindle disruptions cause the engagement of the spindle assembly checkpoint. We propose that cell rounding serves to maintain spindle integrity during its positioning.

scholarly journals Mechanisms for focusing mitotic spindle poles by minus end–directed motor proteins

2005 ◽  
Vol 171 (2) ◽  
pp. 229-240 ◽  
Author(s):  
Gohta Goshima ◽  
François Nédélec ◽  
Ronald D. Vale
Keyword(s):  
Rna Interference ◽  
High Resolution ◽  
Computer Modeling ◽  
Mitotic Spindle ◽  
Motor Proteins ◽  
Spindle Pole ◽  
S2 Cells ◽  
Spindle Poles ◽  
Drosophila S2 Cells ◽  
High Resolution Microscopy

During the formation of the metaphase spindle in animal somatic cells, kinetochore microtubule bundles (K fibers) are often disconnected from centrosomes, because they are released from centrosomes or directly generated from chromosomes. To create the tightly focused, diamond-shaped appearance of the bipolar spindle, K fibers need to be interconnected with centrosomal microtubules (C-MTs) by minus end–directed motor proteins. Here, we have characterized the roles of two minus end–directed motors, dynein and Ncd, in such processes in Drosophila S2 cells using RNA interference and high resolution microscopy. Even though these two motors have overlapping functions, we show that Ncd is primarily responsible for focusing K fibers, whereas dynein has a dominant function in transporting K fibers to the centrosomes. We also report a novel localization of Ncd to the growing tips of C-MTs, which we show is mediated by the plus end–tracking protein, EB1. Computer modeling of the K fiber focusing process suggests that the plus end localization of Ncd could facilitate the capture and transport of K fibers along C-MTs. From these results and simulations, we propose a model on how two minus end–directed motors cooperate to ensure spindle pole coalescence during mitosis.

scholarly journals Localization of the Kinesin-like Protein Xklp2 to Spindle Poles Requires a Leucine Zipper, a Microtubule-associated Protein, and Dynein

1998 ◽  
Vol 143 (3) ◽  
pp. 673-685 ◽  
Author(s):  
Torsten Wittmann ◽  
Haralabia Boleti ◽  
Claude Antony ◽  
Eric Karsenti ◽  
Isabelle Vernos
Keyword(s):  
Leucine Zipper ◽  
Molecular Mechanisms ◽  
Single Point ◽  
Spindle Pole ◽  
Single Point Mutation ◽  
Spindle Poles ◽  
Centrosome Separation ◽  
Egg Extracts ◽  
Xenopus Egg ◽  
Xenopus Egg Extracts

Xklp2 is a plus end–directed Xenopus kinesin-like protein localized at spindle poles and required for centrosome separation during spindle assembly in Xenopus egg extracts. A glutathione-S-transferase fusion protein containing the COOH-terminal domain of Xklp2 (GST-Xklp2-Tail) was previously found to localize to spindle poles (Boleti, H., E. Karsenti, and I. Vernos. 1996. Cell. 84:49–59). Now, we have examined the mechanism of localization of GST-Xklp2-Tail. Immunofluorescence and electron microscopy showed that Xklp2 and GST-Xklp2-Tail localize specifically to the minus ends of spindle pole and aster microtubules in mitotic, but not in interphase, Xenopus egg extracts. We found that dimerization and a COOH-terminal leucine zipper are required for this localization: a single point mutation in the leucine zipper prevented targeting. The mechanism of localization is complex and two additional factors in mitotic egg extracts are required for the targeting of GST-Xklp2-Tail to microtubule minus ends: (a) a novel 100-kD microtubule-associated protein that we named TPX2 (Targeting protein for Xklp2) that mediates the binding of GST-Xklp2-Tail to microtubules and (b) the dynein–dynactin complex that is required for the accumulation of GST-Xklp2-Tail at microtubule minus ends. We propose two molecular mechanisms that could account for the localization of Xklp2 to microtubule minus ends.

scholarly journals The Drosophila Kinesin-13, KLP59D, Impacts Pacman- and Flux-based Chromosome Movement

2009 ◽  
Vol 20 (22) ◽  
pp. 4696-4705 ◽  
Author(s):  
Uttama Rath ◽  
Gregory C. Rogers ◽  
Dongyan Tan ◽  
Maria Ana Gomez-Ferreria ◽  
Daniel W. Buster ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Family Member ◽  
Somatic Cells ◽  
Spindle Pole ◽  
The Other ◽  
Chromosome Movement ◽  
Spindle Microtubule ◽  
Important Regulator ◽  
Chromosome Movements

Chromosome movements are linked to the active depolymerization of spindle microtubule (MT) ends. Here we identify the kinesin-13 family member, KLP59D, as a novel and uniquely important regulator of spindle MT dynamics and chromosome motility in Drosophila somatic cells. During prometaphase and metaphase, depletion of KLP59D, which targets to centrosomes and outer kinetochores, suppresses the depolymerization of spindle pole–associated MT minus ends, thereby inhibiting poleward tubulin Flux. Subsequently, during anaphase, loss of KLP59D strongly attenuates chromatid-to-pole motion by suppressing the depolymerization of both minus and plus ends of kinetochore-associated MTs. The mechanism of KLP59D's impact on spindle MT plus and minus ends appears to differ. Our data support a model in which KLP59D directly depolymerizes kinetochore-associated plus ends during anaphase, but influences minus ends indirectly by localizing the pole-associated MT depolymerase KLP10A. Finally, electron microscopy indicates that, unlike the other Drosophila kinesin-13s, KLP59D is largely incapable of oligomerizing into MT-associated rings in vitro, suggesting that such structures are not a requisite feature of kinetochore-based MT disassembly and chromosome movements.

scholarly journals Anaphase A: Melting Microtubules Move Chromosomes toward Spindle Poles

2017 ◽  
Author(s):  
Charles L. Asbury
Keyword(s):  
Fluorescence Microscopy ◽  
Mechanistic Models ◽  
Chromosome Movement ◽  
Load Bearing ◽  
Spindle Poles ◽  
Sister Chromatids ◽  
Spindle Elongation ◽  
Anaphase B ◽  
Chromosome Movements ◽  
Cellular Movement

The separation of sister chromatids during anaphase is the culmination of mitosis and one of the most strikingly beautiful examples of cellular movement. It consists of two distinct processes: Anaphase A, the movement of chromosomes toward spindle poles via shortening of the connecting fibers, and anaphase B, separation of the two poles from one another via spindle elongation. I focus here on anaphase A chromosome-to-pole movement. The chapter begins by summarizing classical observations of chromosome movements, which support the current understanding of anaphase mechanisms. Live cell fluorescence microscopy studies showed that poleward chromosome movement is associated with disassembly, or ‘melting’ of the kinetochore-attached microtubule fibers that link chromosomes to poles. Microtubule-marking techniques established that kinetochore-fiber disassembly often occurs through a ‘pac-man’ mechanism, where tubulin subunits are lost from kinetochore-attached plus ends and the kinetochore appears to consume its microtubule track as it moves poleward. In addition, kinetochore-fiber disassembly in many cells occurs partly through ‘flux’, where the microtubules flow continuously toward the poles and tubulin subunits are lost from minus ends. Molecular mechanistic models for how load-bearing attachments are maintained to disassembling microtubule ends, and how the forces are generated to drive pac-man and flux-based movements, are discussed.

scholarly journals Chromosome misalignment is associated with PLK1 activity at cenexin-positive mitotic centrosomes

2019 ◽  
Vol 30 (13) ◽  
pp. 1598-1609 ◽  
Author(s):  
Erica G. Colicino ◽  
Katrina Stevens ◽  
Erin Curtis ◽  
Lindsay Rathbun ◽  
Michael Bates ◽  
...  
Keyword(s):  
Mitotic Spindle ◽  
Spindle Pole ◽  
Dependent Manner ◽  
Binding Partner ◽  
Mitotic Kinase ◽  
Daughter Cells ◽  
Chromosome Distribution ◽  
Spindle Poles ◽  
Mother Centriole

The mitotic kinase, polo-like kinase 1 (PLK1), facilitates the assembly of the two mitotic spindle poles, which are required for the formation of the microtubule-based spindle that ensures appropriate chromosome distribution into the two forming daughter cells. Spindle poles are asymmetric in composition. One spindle pole contains the oldest mitotic centriole, the mother centriole, where the majority of cenexin, the mother centriole appendage protein and PLK1 binding partner, resides. We hypothesized that PLK1 activity is greater at the cenexin-positive older spindle pole. Our studies found that PLK1 asymmetrically localizes between spindle poles under conditions of chromosome misalignment, and chromosomes tend to misalign toward the oldest spindle pole in a cenexin- and PLK1-dependent manner. During chromosome misalignment, PLK1 activity is increased specifically at the oldest spindle pole, and this increase in activity is lost in cenexin-depleted cells. We propose a model where PLK1 activity elevates in response to misaligned chromosomes at the oldest spindle pole during metaphase.

Two domains of p80 katanin regulate microtubule severing and spindle pole targeting by p60 katanin

2000 ◽  
Vol 113 (9) ◽  
pp. 1623-1633 ◽  
Author(s):  
K.P. McNally ◽  
O.A. Bazirgan ◽  
F.J. McNally
Keyword(s):  
Mitotic Spindle ◽  
Binding Proteins ◽  
Spindle Pole ◽  
Negative Regulator ◽  
Microtubule Binding ◽  
Microtubule Severing ◽  
Spindle Poles ◽  
Wd40 Domain

The assembly and function of the mitotic spindle requires the activity of a number of microtubule-binding proteins. Some microtubule-binding proteins bind microtubules in vitro but do not co-localize with microtubules in interphase cells. Instead these proteins associate with specific subregions of the mitotic spindle. Katanin, a heterodimeric microtubule-severing ATPase, is found localized at mitotic spindle poles. In this paper we demonstrate that human p60 katanin and the C-terminal domain of human p80 katanin both bind microtubules in vitro. Association of these two proteins results in an increased microtubule affinity and increased microtubule-severing activity in vitro. Association of these subunits in transfected HeLa cells increases microtubule disassembly activity and targeting to spindle poles. The N-terminal WD40 domain of p80 katanin acts as a negative regulator of microtubule disassembly activity and is also required for spindle pole localization, possibly through interactions with another spindle-pole protein. These results support a model in which katanin is targeted to spindle poles through a combination of direct microtubule binding by the p60 subunit and through interactions between the WD40 domain and an unknown protein. We propose that both domains of p80 are essential in precisely regulating katanin's activity in vivo.

scholarly journals A Potential Role for Human Cohesin in Mitotic Spindle Aster Assembly

2001 ◽  
Vol 276 (50) ◽  
pp. 47575-47582 ◽  
Author(s):  
Heather C. Gregson ◽  
John A. Schmiesing ◽  
Jong-Soo Kim ◽  
Toshiki Kobayashi ◽  
Sharleen Zhou ◽  
...  
Keyword(s):  
Sister Chromatid ◽  
Mitotic Spindle ◽  
Potential Role ◽  
Metaphase Plate ◽  
Spindle Pole ◽  
Sister Chromatid Cohesion ◽  
Cycle Arrest ◽  
Spindle Poles ◽  
Chromatid Cohesion

The cohesin multiprotein complex containing SMC1, SMC3, Scc3 (SA), and Scc1 (Rad21) is required for sister chromatid cohesion in eukaryotes. Although metazoan cohesin associates with chromosomes and was shown to function in the establishment of sister chromatid cohesion during interphase, the majority of cohesin was found to be off chromosomes and reside in the cytoplasm in metaphase. Despite its dissociation from chromosomes, however, microinjection of an antibody against human SMC1 led to disorganization of the metaphase plate and cell cycle arrest, indicating that human cohesin still plays an important role in metaphase. To address the mitotic function of human cohesin, the subcellular localization of cohesin components was reexamined in human cells. Interestingly, we found that cohesin localizes to the spindle poles during mitosis and interacts with NuMA, a spindle pole-associated factor required for mitotic spindle organization. The interaction with NuMA persists during interphase. Similar to NuMA, a significant amount of cohesin was found to associate with the nuclear matrix. Furthermore, in the absence of cohesin, mitotic spindle asters failed to formin vitro. Our results raise the intriguing possibility that in addition to its well demonstrated function in sister chromatid cohesion, cohesin may be involved in spindle assembly during mitosis.

scholarly journals A novel mitotic spindle pole component that originates from the cytoplasm during prophase.

1986 ◽  
Vol 103 (5) ◽  
pp. 1863-1872 ◽  
Author(s):  
P R Sager ◽  
N L Rothfield ◽  
J M Oliver ◽  
R D Berlin
Keyword(s):  
Mitotic Spindle ◽  
Spindle Pole ◽  
Early Prophase ◽  
Microtubule Organizing Center ◽  
Spindle Poles ◽  
Interphase Cells ◽  
Organizing Center ◽  
Mitotic Spindle Pole ◽  
Pole Component

Several unique aspects of mitotic spindle formation have been revealed by investigation of an autoantibody present in the serum of a patient with the CREST (calcinosis, Raynaud's phenomenon, esophageal dysmotility, schlerodacytyly, and telangiectasias) syndrome. This antibody was previously shown to label at the spindle poles of metaphase and anaphase cells and to be absent from interphase cells. We show here that the serum stained discrete cytoplasmic foci in early prophase cells and only later localized to the spindle poles. The cytoplasmic distribution of the antigen was also seen in nocodazole-arrested cells and prophase cells in populations treated with taxol. In normal and taxol-treated cells, the microtubules appeared to emanate from the cytoplasmic foci and polar stain, and in cells released from nocodazole block, microtubules regrew from antigen-containing centers. This characteristic distribution suggests that the antigen is part of a microtubule organizing center. Thus, we propose that a prophase originating polar antigen functions in spindle pole organization as a coalescing microtubule organizing center that is present only during mitosis. Characterization of the serum showed reactions with multiple proteins at 115, 110, 50, 36, 30, and 28 kD. However, affinity-eluted antibody from the 115/110-kD bands was shown to specifically label the spindle pole and cytosolic foci in prophase cells.

Sign in / Sign up

Export Citation Format

Share Document