scholarly journals Seafloor massive sulphide exploration using deep-towed controlled source electromagnetics: Navigational uncertainties

2019 ◽  
Author(s):  
Romina A S Gehrmann ◽  
Amir Haroon ◽  
McKinley Morton ◽  
Axel T Djanni ◽  
Timothy A Minshull
Keyword(s):  
Electric Field ◽  
Error Estimation ◽  
Electric Fields ◽  
Final Model ◽  
Controlled Source ◽  
Precise Knowledge ◽  
Geophysical Surveys ◽  
Vertical Electric Field ◽  
Irregular Motion ◽  
Data Error

SUMMARY Deep-towed geophysical surveys require precise knowledge of navigational parameters such as instrument position and orientation because navigational uncertainties reflect in the data and therefore in the inferred geophysical properties of the sub-seafloor. We address this issue for the case of electrical conductivity inferred from controlled source electromagnetic data. We show that the data error is laterally variable due to irregular motion during deep towing, but also due to lateral variations in conductivity, including those resulting from topography. To address this variability and quantify the data error prior to inversion, we propose a two-dimensional perturbation study. Our workflow enables stable and geologically reliable results for multi-component and multi-frequency inversions. An error estimation workflow is presented, which comprises the assessment of navigational uncertainties, perturbation of navigational parameters, and forward modelling of electric field amplitudes for a homogeneous and then a heterogeneous sub-seafloor conductivity model. Some navigational uncertainties are estimated from variations of direct measurements. Other navigational parameters required for inversion are derived from the measured quantities and their error is calculated by means of error propagation. Some navigational parameters show direct correlation with the measured electric fields. For example, the antenna dip correlates with the vertical electric field and the depth correlates with the horizontal electric field. For the perturbation study each standard deviation is added to the navigational parameters. Forward models are run for each perturbation. Amplitude deviations are summed in quadrature with the stacking error for a total, laterally varying, data error. The error estimation is repeated for a heterogeneous sub-seafloor model due to the large conductivity range (several orders of magnitude), which affects the forward model. The approach enables us to utilize data from several components (multiple electric fields, frequencies and receivers) in the inversion to constrain the final model and reduce ambiguity. The final model is geologically reasonable, in this case enabling the identification of conductive metal sulphide deposits on the seafloor.

Effects of Lightning Current and Ground Conductivity on the Values of Vertical Electric Fields

2013 ◽  
Vol 64 (4) ◽  
Author(s):  
M. Izadi ◽  
M. Z. A. Ab Kadir ◽  
M. Hajikhani ◽  
N. Rameli
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Lightning Current ◽  
Lightning Channel ◽  
Vertical Electric Field ◽  
The Relationship ◽  
Ground Conductivity

In this paper, the relationship between current front time and front time of vertical electric field due to lightning channel at non perfect ground is considered. Results showed that the peak of simulated vertical electric fields under non perfect ground conductivity condition is decreased compared to the corresponding field at perfect ground while the front time of field is increased at non perfect case compared to the perfect one. Likewise, the effect of ground conductivity on the peak and front time of simulated vertical electric field is considered and the results are discussed accordingly.

scholarly journals First in situ measurement of electric field fluctuations during strong spread F in the Indian zone

2000 ◽  
Vol 18 (5) ◽  
pp. 523-531 ◽  
Author(s):  
H. S. S. Sinha ◽  
S. Raizada
Keyword(s):  
Electric Field ◽  
Electron Density ◽  
Electric Fields ◽  
Vertical Direction ◽  
Intermediate Scale ◽  
Radio Science ◽  
Ionospheric Physics ◽  
Vertical Electric Field ◽  
Field Fluctuations ◽  
Spread F

Abstract. An RH-560 rocket flight was conducted from Sriharikota rocket range (SHAR) (14°N, 80°E, dip 14°N) along with other experiments, as a part of equatorial spread F (ESF) campaign, to study the nature of irregularities in electric field and electron density. The rocket was launched at 2130 local time (LT) and it attained an apogee of 348 km. Results of vertical and horizontal electric field fluctuations are presented here. Scale sizes of electric field fluctuations were measured in the vertical direction only. Strong ESF irregularities were observed in three regions, viz., 160-190 km, 210-257 km and 290-330 km. Some of the valley region vertical electric field irregularities (at 165 km and 168 km), in the intermediate-scale size range, observed during this flight, show spectral peak at kilometer scales and can be interpreted in terms of the image striation theory suggested by Vickrey et al. The irregularities at 176 km do not exhibit any peak at kilometer scales and appear to be of a new type. Scale sizes of vertical electric field fluctuations showed a decrease with increasing altitude. The most prominent scales were of the order of a few kilometers around 170 km and a few hundred meters around 310 km. Spectra of intermediate-scale vertical electric field fluctuations below the base of the F region (210-257 km) showed a tendency to become slightly flatter (spectral index n = -2.1 ± 0.7) as compared to the valley region (n = -3.6 ± 0.8) and the region below the F peak (n = -2.8 ± 0.5). Correlation analysis of the electron density and vertical electric field fluctuations suggests the presence of a sheared flow of current in 160-330 km region.Keywords: Ionosphere (Electric fields and currents; ionospheric irregularities); Radio science (ionospheric physics)

scholarly journals Effects of the airwave in time-domain marine controlled-source electromagnetics

Geophysics ◽  
2011 ◽  
Vol 76 (4) ◽  
pp. F251-F261 ◽  
Author(s):  
Jürg Hunziker ◽  
Evert Slob ◽  
Wim Mulder
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Time Domain ◽  
Beam Steering ◽  
Data Set ◽  
Controlled Source ◽  
Controlled Source Electromagnetics ◽  
Subsurface Reservoir ◽  
The Impact ◽  
Depth Water

In marine time-domain controlled-source electromagnetics (CSEM), there are two different acquisition methods: with horizontal sources for fast and simple data acquisition or with vertical sources for minimizing the effects of the airwave. Illustrations of the electric field as a function of space and time for various source antenna orientations, based on analytical formulation of the electric field in two half-spaces, provide insights into the properties of the airwave and the nature of diffuse electric fields. Observing the development of the electric field over time and space reveals that diffusive fields exhibit directionality. Therefore, techniques that have thus far mostly been applied to wavefields can be adapted for CSEM. Examples range from the well-known up-down decomposition to beam steering. Vertical sources have the advantage of not creating an airwave. On the other hand, it is quite difficult to achieve perfect verticality of the source antenna. Results, using a numerically modeled data set to analyze the impact of the airwave on a signal from a subsurface reservoir in the case of a slightly dipping vertical source, indicate that already for a dip of [Formula: see text], the airwave contributes 20% to the complete electric field in our configuration of reservoir depth, water thickness, and conductivity values.

scholarly journals Ionospheric quasi-static electric field anomalies during seismic activity in August–September 1981

2009 ◽  
Vol 9 (1) ◽  
pp. 3-15 ◽  
Author(s):  
M. Gousheva ◽  
D. Danov ◽  
P. Hristov ◽  
M. Matova
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Research Work ◽  
Vertical Component ◽  
Plate Tectonic ◽  
Static Electric Field ◽  
Earthquake Sources ◽  
Source Regions ◽  
Vertical Electric Field ◽  
Upper Ionosphere

Abstract. The paper proposes new results, analyses and information for the plate tectonic situation in the processing of INTERCOSMOS-BULGARIA-1300 satellite data about anomalies of the quasi-static electric field in the upper ionosphere over activated earthquake source regions at different latitudes. The earthquake catalogue is made on the basis of information from the United State Geological Survey (USGS) website. The disturbances in ionospheric quasi-static electric fields are recorded by IESP-1 instrument aboard the INTERCOSMOS-BULGARIA-1300 satellite and they are compared with significant seismic events from the period 14 August–20 September 1981 in magnetically very quiet, quiet and medium quiet days. The main tectonic characteristics of the seismically activated territories are also taken in account. The main goal of the above research work is to enlarge the research of possible connections between anomalous vertical electric field penetrations into the ionosphere and the earthquake manifestations, also to propose tectonic arguments for the observed phenomena. The studies are represented in four main blocks: (i) previous studies of similar problems, (ii) selection of satellite, seismic and plate tectonic data, (iii) data processing with new specialized software and observations of the quasi-static electric field and (iiii) summary, comparison of new with previous results in our studies and conclusion. We establish the high informativity of the vertical component Ez of the quasi-static electric field in the upper ionosphere according observations by INTERCOSMOS-BULGARIA-1300 that are placed above considerably activated earthquake sources. This component shows an increase of about 2–10 mV/m above sources, situated on mobile structures of the plates. The paper discusses the observed effects. It is represented also a statistical study of ionospheric effects 5–15 days before and 5–15 days after the earthquakes with magnitude M 4.8–7.9.

Tuning the Electric Field Response of MOFs by Rotatable Dipolar Linkers

2019 ◽  
Author(s):  
Johannes P. Dürholt ◽  
Babak Farhadi Jahromi ◽  
Rochus Schmid
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Structural Changes ◽  
Dielectric Behavior ◽  
Two Dimensions ◽  
Dielectric Constants ◽  
Electric Response ◽  
Dipole Strength ◽  
Metal Organic ◽  
Dynamics Simulations

Recently the possibility of using electric fields as a further stimulus to trigger structural changes in metal-organic frameworks (MOFs) has been investigated. In general, rotatable groups or other types of mechanical motion can be driven by electric fields. In this study we demonstrate how the electric response of MOFs can be tuned by adding rotatable dipolar linkers, generating a material that exhibits paralectric behavior in two dimensions and dielectric behavior in one dimension. The suitability of four different methods to compute the relative permittivity κ by means of molecular dynamics simulations was validated. The dependency of the permittivity on temperature T and dipole strength μ was determined. It was found that the herein investigated systems exhibit a high degree of tunability and substantially larger dielectric constants as expected for MOFs in general. The temperature dependency of κ obeys the Curie-Weiss law. In addition, the influence of dipolar linkers on the electric field induced breathing behavior was investigated. With increasing dipole moment, lower field strength are required to trigger the contraction. These investigations set the stage for an application of such systems as dielectric sensors, order-disorder ferroelectrics or any scenario where movable dipolar fragments respond to external electric fields.

scholarly journals Focused Patterning of Electrospun Nanofibers Using a Dielectric Guide Structure

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1505
Author(s):  
Byeongjun Lee ◽  
Younghyeon Song ◽  
Chan Park ◽  
Jungmin Kim ◽  
Jeongbeom Kang ◽  
...  
Keyword(s):  
Spatial Distribution ◽  
Finite Elements ◽  
Electric Field ◽  
Electrospun Nanofibers ◽  
Electrospun Fibers ◽  
Continuous Line ◽  
Key Factors ◽  
Key Technology ◽  
Vertical Electric Field ◽  
Dielectric Guide

The patterning of electrospun fibers is a key technology applicable to various fields. This study reports a novel focused patterning method for electrospun nanofibers that uses a cylindrical dielectric guide. The finite elements method (FEM) was used to analyze the electric field focusing phenomenon and ground its explanation in established theory. The horizontal and vertical electric field strengths in the simulation are shown to be key factors in determining the spatial distribution of nanofibers. The experimental results demonstrate a relationship between the size of the cylindrical dielectric guide and that of the electrospun area accumulated in the collector. By concentrating the electric field, we were able to fabricate a pattern of less than 6 mm. The demonstration of continuous line and square patterning shows that the electrospun area can be well controlled. This novel patterning method can be used in a variety of applications, such as sensors, biomedical devices, batteries, and composites.

scholarly journals Meta-Deflectors Made of Dielectric Nanohole Arrays with Anti-Damage Potential

Photonics ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 107
Author(s):  
Haichao Yu ◽  
Feng Tang ◽  
Jingjun Wu ◽  
Zao Yi ◽  
Xin Ye ◽  
...  
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Laser Cutting ◽  
High Complexity ◽  
Damage Potential ◽  
Optical Components ◽  
Nanohole Arrays ◽  
Intense Light ◽  
Polarization Of Light ◽  
Air Hole

In intense-light systems, the traditional discrete optical components lead to high complexity and high cost. Metasurfaces, which have received increasing attention due to the ability to locally manipulate the amplitude, phase, and polarization of light, are promising for addressing this issue. In the study, a metasurface-based reflective deflector is investigated which is composed of silicon nanohole arrays that confine the strongest electric field in the air zone. Subsequently, the in-air electric field does not interact with the silicon material directly, attenuating the optothermal effect that causes laser damage. The highest reflectance of nanoholes can be above 99% while the strongest electric fields are tuned into the air zone. One presentative deflector is designed based on these nanoholes with in-air-hole field confinement and anti-damage potential. The 1st order of the meta-deflector has the highest reflectance of 55.74%, and the reflectance sum of all the orders of the meta-deflector is 92.38%. The optothermal simulations show that the meta-deflector can theoretically handle a maximum laser density of 0.24 W/µm2. The study provides an approach to improving the anti-damage property of the reflective phase-control metasurfaces for intense-light systems, which can be exploited in many applications, such as laser scalpels, laser cutting devices, etc.

scholarly journals Integrating flexible electronics for pulsed electric field delivery in a vascularized 3D glioblastoma model

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Marie C. Lefevre ◽  
Gerwin Dijk ◽  
Attila Kaszas ◽  
Martin Baca ◽  
David Moreau ◽  
...  
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Flexible Electronics ◽  
Soft Tissues ◽  
Multiphoton Microscopy ◽  
Membrane Integrity ◽  
Tumor Model ◽  
Pulsed Electric Fields ◽  
In Ovo ◽  
Cell Membrane Integrity

AbstractGlioblastoma is a highly aggressive brain tumor, very invasive and thus difficult to eradicate with standard oncology therapies. Bioelectric treatments based on pulsed electric fields have proven to be a successful method to treat cancerous tissues. However, they rely on stiff electrodes, which cause acute and chronic injuries, especially in soft tissues like the brain. Here we demonstrate the feasibility of delivering pulsed electric fields with flexible electronics using an in ovo vascularized tumor model. We show with fluorescence widefield and multiphoton microscopy that pulsed electric fields induce vasoconstriction of blood vessels and evoke calcium signals in vascularized glioblastoma spheroids stably expressing a genetically encoded fluorescence reporter. Simulations of the electric field delivery are compared with the measured influence of electric field effects on cell membrane integrity in exposed tumor cells. Our results confirm the feasibility of flexible electronics as a means of delivering intense pulsed electric fields to tumors in an intravital 3D vascularized model of human glioblastoma.

Sign in / Sign up

Export Citation Format

Share Document