scholarly journals Reconfigurable equilibrium circuit with additional power supply

2019 ◽  
Vol 15 (1) ◽  
pp. 106-111 ◽  
Author(s):  
Yu Zhang ◽  
Mingming Huang ◽  
Tiezhou Wu ◽  
Feng Ji

Abstract The reconfigurable equilibrium circuit can take account of the number of components and the conversion efficiency and can easily balance every single cell in the battery pack, but the voltage of the battery pack will fluctuate when the battery pack is balanced. To solve this problem, a reconfigurable equalization circuit with an additional power supply is proposed. By replacing the cell with the additional power supply, the purpose of stabilizing the voltage of the battery pack is achieved. Aiming at the additional power supply, this paper puts forward a method that the additional power supply participates in the charging (discharging) process when the SOC (state of charge) of the battery pack is not lower (higher) than the additional power supply while the battery pack is charging (discharging), to make the charge and discharge capacity of the additional power supply always better than the battery pack. The experimental results show that the proposed equalization circuit can not only retain the advantages of the traditional reconfigurable equilibrium circuit but also maintain the voltage of the battery pack in the equalization process.

2016 ◽  
Vol 1 (1) ◽  
pp. 45-52
Author(s):  
Palupi Puspitorini

The aim of this study was to select the best sources of auxin of which it can stimulate the growth of shoots Pineapple plant cuttings. This research is compiled in a completely randomized design (CRD) with 4 treatments and 6 replications. The Data were statistically Analyzed by the DMRT. Level of treatment given proves that no treatment 0%, cow urine concentration of 25%, young coconut water concentration of 25% and Rootone F 100 mg / cuttings. The results showed that cow urine concentrations of 25% and Rootone F 100 mg give the best results in stimulating the growth of shoots pineapple stem cuttings. Experimental results concluded that the effect of this natural hormone were better than the shoots without given hormone.           


1995 ◽  
Vol 31 (12) ◽  
pp. 267-273 ◽  
Author(s):  
B. S. O. Ceballos ◽  
A. Konig ◽  
B. Lomans ◽  
A. B. Athayde ◽  
H. W. Pearson

A single full-scale primary facultative pond in Sapé, north-east Brazil was monitored for performance and efficiency. The pond had a hydraulic retention time of 61 days and achieved a 95% BOD5 removal efficiency and had no helminth eggs in the effluent. The effluent failed to meet the WHO faecal coliform guideline for unrestricted irrigation. The pond was dominated by the cyanobacterium Microcystis and gave better than predicted orthophosphate removal. Details of how the system could be simply upgraded utilizing the same land are discussed.


2020 ◽  
Vol 27 (4) ◽  
pp. 329-336 ◽  
Author(s):  
Lei Xu ◽  
Guangmin Liang ◽  
Baowen Chen ◽  
Xu Tan ◽  
Huaikun Xiang ◽  
...  

Background: Cell lytic enzyme is a kind of highly evolved protein, which can destroy the cell structure and kill the bacteria. Compared with antibiotics, cell lytic enzyme will not cause serious problem of drug resistance of pathogenic bacteria. Thus, the study of cell wall lytic enzymes aims at finding an efficient way for curing bacteria infectious. Compared with using antibiotics, the problem of drug resistance becomes more serious. Therefore, it is a good choice for curing bacterial infections by using cell lytic enzymes. Cell lytic enzyme includes endolysin and autolysin and the difference between them is the purpose of the break of cell wall. The identification of the type of cell lytic enzymes is meaningful for the study of cell wall enzymes. Objective: In this article, our motivation is to predict the type of cell lytic enzyme. Cell lytic enzyme is helpful for killing bacteria, so it is meaningful for study the type of cell lytic enzyme. However, it is time consuming to detect the type of cell lytic enzyme by experimental methods. Thus, an efficient computational method for the type of cell lytic enzyme prediction is proposed in our work. Method: We propose a computational method for the prediction of endolysin and autolysin. First, a data set containing 27 endolysins and 41 autolysins is built. Then the protein is represented by tripeptides composition. The features are selected with larger confidence degree. At last, the classifier is trained by the labeled vectors based on support vector machine. The learned classifier is used to predict the type of cell lytic enzyme. Results: Following the proposed method, the experimental results show that the overall accuracy can attain 97.06%, when 44 features are selected. Compared with Ding's method, our method improves the overall accuracy by nearly 4.5% ((97.06-92.9)/92.9%). The performance of our proposed method is stable, when the selected feature number is from 40 to 70. The overall accuracy of tripeptides optimal feature set is 94.12%, and the overall accuracy of Chou's amphiphilic PseAAC method is 76.2%. The experimental results also demonstrate that the overall accuracy is improved by nearly 18% when using the tripeptides optimal feature set. Conclusion: The paper proposed an efficient method for identifying endolysin and autolysin. In this paper, support vector machine is used to predict the type of cell lytic enzyme. The experimental results show that the overall accuracy of the proposed method is 94.12%, which is better than some existing methods. In conclusion, the selected 44 features can improve the overall accuracy for identification of the type of cell lytic enzyme. Support vector machine performs better than other classifiers when using the selected feature set on the benchmark data set.


Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1700
Author(s):  
Anca Mihaela Vasile (Dragan) ◽  
Alina Negut ◽  
Adrian Tache ◽  
Gheorghe Brezeanu

An EEPROM (electrically erasable programmable read-only memory) reprogrammable fuse for trimming a digital temperature sensor is designed in a 0.18-µm CMOS EEPROM. The fuse uses EEPROM memory cells, which allow multiple programming cycles by modifying the stored data on the digital trim codes applied to the thermal sensor. By reprogramming the fuse, the temperature sensor can be adjusted with an increased trim variation in order to achieve higher accuracy. Experimental results for the trimmed digital sensor showed a +1.5/−1.0 ℃ inaccuracy in the temperature range of −20 to 125 ℃ for 25 trimmed DTS samples at 1.8 V by one-point calibration. Furthermore, an average mean of 0.40 ℃ and a standard deviation of 0.70 ℃ temperature error were obtained in the same temperature range for power supply voltages from 1.7 to 1.9 V. Thus, the digital sensor exhibits similar performances for the entire power supply range of 1.7 to 3.6 V.


Author(s):  
Sankirti Sandeep Shiravale ◽  
R. Jayadevan ◽  
Sanjeev S. Sannakki

Text present in a camera captured scene images is semantically rich and can be used for image understanding. Automatic detection, extraction, and recognition of text are crucial in image understanding applications. Text detection from natural scene images is a tedious task due to complex background, uneven light conditions, multi-coloured and multi-sized font. Two techniques, namely ‘edge detection' and ‘colour-based clustering', are combined in this paper to detect text in scene images. Region properties are used for elimination of falsely generated annotations. A dataset of 1250 images is created and used for experimentation. Experimental results show that the combined approach performs better than the individual approaches.


2013 ◽  
Vol 732-733 ◽  
pp. 809-812 ◽  
Author(s):  
Hong Rui Liu ◽  
Chao Ying Xia

This paper proposes an equalizer for serially connected Lithium-ion battery cells. The battery cell with the lowest state of charge (SOC) is charged by the equalizer during the process of charging and discharging, and the balancing current is constant and controllable. Three unbalanced lithium-ion battery cells in series are selected as the experimental object by this paper. The discharging current under a certain UDDS and 20A charging current are used to complete respectively one time balancing experiment of discharging and charging to the three lithium-ion battery cells. The validity of the balancing strategy is confirmed in this paper according to the experimental results.


2015 ◽  
Vol 1092-1093 ◽  
pp. 972-975
Author(s):  
Jing Yang

According to the problems exist in cyclic utilization of washing wastewater, the coagulation tests utilizing ferric trichloride (FeCl3), alums, poly aluminium chloride (PAC) and polyacrylamide (PAM) are studied, respectively. Experimental results show that PAC was much better than the other coagulants in the removal of LAS and chroma as a single coagulant. Cast 2.5mL PAC(10%) into quantitative washing wastewater, the removal rate of LAS and chroma reach 82.5% and 87.8%, respectively. When mix the every two kinds of coagulants, maintaining the same total amount of coagulant to 2.5mL, cast1.0mL PAC(10%) and 1.5mL alum (10%) into washing wastewater ,the removal rate of LAS and chroma reach 84.1% and 90.0%, respectively.


2017 ◽  
Vol 19 (18) ◽  
pp. 11187-11196 ◽  
Author(s):  
Pooya Tahay ◽  
Meisam Babapour Gol Afshani ◽  
Ali Alavi ◽  
Zahra Parsa ◽  
Nasser Safari

Photocurrent efficiency measurements and other experimental results demonstrate that the best TiO2 nanoparticle size depends on the intrinsic properties of the dye and the best size changes with dye type.


Sign in / Sign up

Export Citation Format

Share Document