scholarly journals 83 Tenderness and cooking loss of beef loins

2019 ◽  
Vol 97 (Supplement_1) ◽  
pp. 27-28 ◽  
Author(s):  
Robin G Coombs ◽  
C R Richardon
Keyword(s):  
Standard Deviation ◽  
Meat Quality ◽  
Shear Force ◽  
Quality Attributes ◽  
Grocery Store ◽  
Cooking Loss ◽  
Longissimus Muscle ◽  
Internal Temperature ◽  
Regional Area ◽  
Resting Period

Abstract The focus of this study involved measuring two variables of meat quality: tenderness and cooking loss. Experiments were conducted on a premium cut of meat – the loin. The loin contains the Longissimus muscle, with pieces of the Iliocostalis and Spinalis dorsi muscles. The Longissimus muscle was cored for tenderness. Two sources of loins were evaluated: Akaushi breed, and from a commercial grocery store. Meat used consisted of Akaushi loins from 6 different animals (prime grade) and one select grade loin (control). The protocol involved dividing each loin into 6 (907-1134g) roasts, cooking at 104.40 C (to internal temperature of 73.90 C), measuring by weight the cooking loss of the roasts after a 30-minute resting period, and determining tenderness by Warner-Bratzler Shear Force (WBSF) (after overnight storage in a cooler). Cores were taken at 6 different locations of the roast, over the same regional area for WBSF determinations. The WBSF coring instrument used was provided. Tenderness of each loin was measured in 36 cores (n = 36). In overall tenderness, the control loin ranked third out of the seven loins and had the least amount of cooking loss. No differences were found in tenderness (P > 0.05). However, a difference was found in average cooking loss 181.44g ± 0.03 (control); 254.01g ± 0.03 (Akaushi) (P < 0.05). When observing tenderness consistency, the control loin had a somewhat larger standard deviation (1.38 vs 0.756) than the Akaushi loins.Loins used in this study showed variation in cooking loss, tenderness, and consistency between a commercial grocery store source and the Akaushi beef source. These data indicates that quality attributes of beef loins used in this study may be different in ways not related to grade.

scholarly journals 84 Cooking loss of ground beef

2019 ◽  
Vol 97 (Supplement_1) ◽  
pp. 28-28
Author(s):  
Robin G Coombs ◽  
C R Richardon
Keyword(s):  
Ground Beef ◽  
Quality Attributes ◽  
Grocery Store ◽  
Cooking Loss ◽  
Internal Temperature ◽  
Solid Portion ◽  
George Foreman

Abstract This study was conducted to measure two quality variables of ground beef: cooking loss and shrinkage. Twenty 454g packages of ground chuck from a commercial grocery store 80:20 lean:fat ratio (calculated per label to be 71:29), and 20 packages of ground beef from a specific breed (SB) (calculated per label to be 75:25) were used. Each package was divided into four hand-formed patties weighing 118-120g (n = 80). Prior to grilling, the patties were weighed, circumference measured (cm), and thickness measured (cm). Patties were grilled on a George Foreman Grill to an internal temperature of 73.9° C. Cooking loss (meat drippings) from grilled patties was collected. After reaching the desired internal temperature, individual patties were removed from the grill, weighed, and circumference and thickness measured. Cooking loss was collected in a grease tray and from the grill surface with a spatula. Cooking loss was weighed (g) and contents poured into a glass jar and stored in a freezer for further evaluation. There was no difference (P > 0.05) in cooking loss between the control and SB treatment, 61.40% and 61.34% respectively. A difference (P < 0.05) was found in cooking shrinkage (circumference and thickness). Circumference between fresh and cooked showed a change of 15.48% (control) and 12.88% (SB) (P < 0.05). Patty thickness between fresh and cooked changed by 9.32% (control) and 5.71 % (SB) (P<0.05). Total cooking loss per 454g package did not differ 13.74% (control) and 14.16% (SB). However, when cooking loss was separated in solid and liquid portions, the solid portion was 19.71% (control) and 28.30% (SB) (P < 0.05). These data indicate that quality attributes of ground beef vary between sources with similar lean:fat ratio.

scholarly journals Influence of electrical stimulation on carcass and meat quality of Kosher and conventionally slaughtered cattle

2015 ◽  
Vol 44 (5) ◽  
pp. 58-63
Author(s):  
B Agbeniga ◽  
EC Webb
Keyword(s):  
Electrical Stimulation ◽  
Meat Quality ◽  
Shear Force ◽  
Quality Attributes ◽  
Cooking Loss ◽  
Temperature Profiles ◽  
Group 12 ◽  
Significant Difference ◽  
Water Holding

In a previous study regarding the effects of Kosher and conventional slaughter techniques on carcass and meat quality of cattle, it was speculated that electrical stimulation may have affected some of the meat qualities. Therefore, the objective of this study was to investigate the effects of electrical stimulation (ES) and non-electrical stimulation (NES) on key carcass and meat quality attributes of cattle slaughtered by Kosher vs. conventional slaughter methods. Carcass pH and temperature profiles over a 24 h post mortem (pm) period, meat shear force and water holding capacity were investigated in feedlot type cattle of comparable weights and breed types. Results showed that the combined effects of slaughter methods did not influence the meat quality attributes, but there were differences within the slaughter groups. The effect of ES on carcass pH lasted longer within the conventionally slaughtered group (12 h), than in the Kosher slaughter group (6 h). Muscle samples from the ES groups for both slaughter methods were more tender. Electrical stimulation also had a significant effect on the cooking loss from Kosher meat, while there was no significant difference in meat from the conventional slaughter methods. The results show that ES influences certain meat and carcass quality attributes of cattle, based on the way cattle were slaughtered.Keywords: Carcass pH, cooking loss, drip loss, electrical stimulation, shear force, slaughter technique

scholarly journals Chemical Composition and Quality Characteristics of Meat in Three One-Humped Camel (Camelus dromedarius) Breeds as Affected by Muscle Type and Post-Mortem Storage Period

Animals ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 834 ◽  
Author(s):  
Gamaleldin M. Suliman ◽  
Abdullah N. Alowaimer ◽  
Elsayed O.S. Hussein ◽  
Hatem S. Ali ◽  
Sameh A. Abdelnour ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Meat Quality ◽  
Shear Force ◽  
Storage Period ◽  
Quality Attributes ◽  
Sensory Attributes ◽  
Cooking Loss ◽  
Muscle Type ◽  
And Storage ◽  
Water Holding

The influence of muscle type and postmortem storage period on meat chemical composition and quality attributes of three breeds of camels (Baladi Saudi, Pakistani, and Somali) were investigated in this study. Crude fat and ash content were significantly higher in the Pakistani than in the Baladi Saudi and Somali breeds, except for higher moisture content observed in the Somali breed. The longissimus lumborum (LL) and semimembranosus (SM) muscles had a greater crude protein than the biceps femoris (BF) muscle. Storage period exhibited a significant reduction in pH values and improvement in color components of meat. The Somali breed produced higher cooking loss % and shear force, with a lower water holding capacity than the Baladi Saudi and Pakistani breeds. The LL muscle had better cooking loss %, water holding capacity, and shear force, whereas storage period (7 days) exhibited a significant reduction in the myofibrillar fragmentation index. Baladi Saudi and Pakistani breeds and LL muscle samples presented better meat sensory attributes, while storage period had no significant influence on the overall sensory characters of meat. In conclusion, there were significant differences between the chemical and structural characteristics of the LL, BF, and SM muscle samples among the three breeds of camel. Baladi Saudi and Pakistani had better meat quality traits than the Somali breed. In addition, LL muscles had better nutritional values and meat quality parameters than BF and SM muscles. Improvement in meat quality attributes were achieved with the storage process of 7 days. It is observed that, the Saudi Baladi camels have a merit of low fat content over both Somali and Pakistani camel breeds. It is also concluded that no significant effects were observed between the treatments as a result of storage when sensory attributes were considered. Moreover, breed, muscle and storage period were interacted significantly only with regard to lightness color space and shear force. This is useful knowledge for the meat industry for optimizing processing and storage procedures for various camel muscles.

scholarly journals Reproducibility and correlation between meat shear force measurements by Warner-Bratzler machine and a texturometer

2016 ◽  
Vol 5 (2) ◽  
Author(s):  
Lucas Arantes-Pereira ◽  
Flávia C. Vargas ◽  
Júlio C.C. Balieiro ◽  
Ana Monica Q.B. Bittante ◽  
Paulo J.A. Sobral
Keyword(s):  
Meat Quality ◽  
Proximate Composition ◽  
Shear Force ◽  
Biceps Femoris ◽  
Cooking Loss ◽  
Force Measurements ◽  
Regression Curves ◽  
Sensory Characteristic ◽  
Psoas Major ◽  
Tensor Fasciae Latae

Tenderness has a prominent position on meat quality and is considered to be the sensory characteristic that most influences meat acceptance. Therefore, the aim of this study was to evaluate the accuracy and determine correlations among three different meat shear force techniques. Commercial samples of bovine Longissimus thoracis et lumborum (BLTL), Tensor fasciae latae (BTFL), Semitendinosus (BST), Psoas major (BPM), Biceps femoris (BBF) and swine Longissimus thoracis et lumborum (PLTL) were analyzed for pH, proximate composition, cooking loss and shear force with a classical Warner-Bratzler device and a TA-XT2 Texturometer equipped with shear blades 1 and 3 mm thick. The effect of different techniques in each studied muscle was statistically analyzed and regression curves were built. Results from the 1 mm blade were quite similar to the ones obtained with the Warner-Bratzler, however the results from 3 mm blade were overestimated (p<0.05). Significant correlation (p<0.01) among shear force technique using Warner-Bratzler and the ones using the Texturometer was observed (0.47 for 1 mm blade and 0.57 for the 3 mm blade). In conclusion, we found that the 1 mm blade and the Warner-Bratzler machine are reproducible for all tested muscles, while the 3 mm blade is not reproducible for the BTFL, BST, BPM, BBF, PLTL. There is a significant correlation between the results obtained by the classical Warner-Bratzler and the TA-XT2 Texturometer equipped with both blades. Therefore, TA-XT2 Texturometer equipped with the 1mm blade can perfectly replace the traditional Warner-Bratzler device.

Effects of crossbred ewe genotype and ram genotype on lamb meat quality from the lowland sheep flock

2002 ◽  
Vol 139 (2) ◽  
pp. 195-204 ◽  
Author(s):  
L. E. R. DAWSON ◽  
A. F. CARSON ◽  
B. W. MOSS
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Live Weight ◽  
Growth Index ◽  
Gluteus Medius ◽  
Quality Parameters ◽  
Cooking Loss ◽  
Lamb Meat ◽  
Hue Angle ◽  
The Relationship

A study was carried out on five lowland farms in Northern Ireland over 2 years to investigate the effects of crossbred ewe and ram genotype on lamb meat quality. Four ewe genotypes were sourced from six hill farms – Bluefaced Leicester×Blackface (BLXB), Texel×Blackface (TXB), Suffolk×Cheviot (SXCH) and Texel×Cheviot (TXCH). On each farm groups of 20–30 of each crossbred ewe genotype were crossed with Suffolk or Texel sires. Within each of the ram breeds, high lean growth index rams sourced from UK sire reference schemes (SRS) were compared with rams sourced from flocks not involved in objective genetic improvement programmes (control). Throughout the 2 years of the study the ewes lambed at 1 and 2 years of age. Lambs from each of the crosses were slaughtered at 36, 44 and 52 kg live weight. Meat from lambs slaughtered at 36 kg had lower a* values (15.1) than meat from lambs slaughtered at 52 kg (17.0 S.E. 0.47) (P<0.05). Ewe genotype had no effect on any parameter of meat quality measured. The carcasses of lambs sired by Suffolk rams had a higher pHU than lambs sired by Texel rams (5.70 v. 5.65; S.E. 0.014; P<0.05) and hue angle was lower (P<0.05) in Suffolk-sired lambs (32.9°) compared with Texel-sired lambs (35.1°) (S.E. 0.62°). Warner–Bratzler shear force was lower in SRS-sired lambs (2.05 kg/cm2) compared with control-sired lambs (2.36 (S.E. 0.096) kg/cm2; P<0.05). Carcasses from male lambs had a greater cooking loss (217 g/kg) than from female lambs (196 S.E. 5.7 g/kg) (P<0.01) and meat from male lambs had greater values for Warner–Bratzler shear force (2.44 kg/cm2) than from female lambs (1.97 S.E. 0.098 kg/cm2) (P<0.001). Low, but statistically significant (P<0.05) correlations were obtained between carcass fat measurements and meat quality parameters (r = −0.29 for the relationship between cooking loss and fat depth over the gluteus mediusP<0.001); r = 0.21 for the relationship between fat classification and C* values P<0.01). When meat quality parameters for each of the fat classes were averaged, significant linear regressions (P<0.05) were obtained between fat classification and pHU, a* and C* values.

Effects of a non-synonymous CBG gene single nucleotide polymorphism (SNP) on meat-quality traits in Berkshire pigs

2016 ◽  
Vol 96 (1) ◽  
pp. 45-51 ◽  
Author(s):  
Seul Gi Kwon ◽  
Jung Hye Hwang ◽  
Da Hye Park ◽  
Tae Wan Kim ◽  
Deok Gyeong Kang ◽  
...  
Keyword(s):  
Moisture Content ◽  
Meat Quality ◽  
Shear Force ◽  
Cooking Loss ◽  
Quality Traits ◽  
Post Mortem ◽  
Single Nucleotide ◽  
Meat Quality Traits ◽  
Berkshire Pigs ◽  
Water Holding

Corticosteroid-binding globulin (CBG) is a plasma transport protein that has glucocorticoid-binding activity. In the present study, we identified CBG gene expression in several tissues of four pig breeds: Berkshire, Duroc, Landrace, and Yorkshire. Expression of CBG mRNA was detected in the liver of all four breeds, and was the highest in Berkshire pigs. We also found single nucleotide polymorphisms (SNPs) in the CBG gene from Berkshire pigs, including SNP c.919G>A, which corresponds to 307G>R. We analyzed the relationships between this CBG variant and various meat-quality traits. The SNP was significantly associated with backfat thickness, post-mortem pH24h, meat color [CIE a* (redness), CIE b* (yellowness)], water-holding capacity, fat content, moisture content, protein content, cooking loss, and shear force. However, the effects differed by gender: the values were significantly associated with almost all traits in gilts, whereas only cooking loss and shear force were shown significantly in barrows. The variant G allele was associated with decreases in backfat thickness, post-mortem pH24h, CIE a*, fat content, and cooking loss, but with increases in CIE b*, water-holding capacity, moisture content, protein content, and shear force. Because the general correlation between meat-quality traits were not validated in the present study, we suggest that certain SNP might be used in the restrictive application to distinguish meat-quality traits.

scholarly journals Effect of Transportation and Low Voltage Electrical Stimulation on Meat Quality Characteristics of Omani Sheep

2010 ◽  
Vol 15 ◽  
pp. 1
Author(s):  
Isam T. Kadim ◽  
Osman Mahgoub ◽  
Waleed Al-Marzooqi ◽  
Samera Khalaf
Keyword(s):  
Electrical Stimulation ◽  
Meat Quality ◽  
Shear Force ◽  
Sarcomere Length ◽  
Low Voltage ◽  
Quality Characteristics ◽  
Cooking Loss ◽  
Longissimus Dorsi ◽  
Road Transportation ◽  
Fragmentation Index

The aim of this study was to determine the effects of road transportation during the hot season (36 oC) and low voltage electrical stimulation on meat quality characteristics of Omani sheep. Twenty intact male sheep (1-year old) were divided into two equal groups: 3 hrs transported or non-transported. The transported group was transferred to the slaughterhouse the day of slaughter in an open truck covering a distance of approximately 300 km. The non-transported group was kept in a lairage of a commercial slaughterhouse with ad libitum feed and water for 3 days prior to slaughter. Blood samples were collected from the animals before loading and prior to slaughter in order to assess their physiological response to stress in terms of hormonal levels. Fifty percent of the carcasses from each group were randomly assigned to low voltage (90 V) at 20 min postmortem. Muscle ultimate pH, expressed juice, cooking loss percentage, WB-shear force value, sarcomere length, myofibrillar fragmentation index and colour L*, a*, b* were measured on samples from Longissimus dorsi muscles collected 24 hrs postmortem at 2-4 oC. The transported sheep had significantly (P<0.05) higher cortisol adrenaline, nor-adrenaline, and dopamine levels than the non-transported group. Muscles from electrically-stimulated carcasses had significantly (P<0.05) lower pH values, longer sarcomere length, lower shear force value, higher expressed juice, myofibrillar fragmentation index and L* values than those from non-stimulated ones. Transportation significantly influenced meat quality characteristics of the Longissimus dorsi muscle. Muscle ultimate pH and shear force values were significantly higher, while CIE L*, a*, b*, expressed juice and cooking loss were lower in transported than non-transported sheep. This study indicated that pre-slaughter transportation at high ambient temperatures can cause noticeable changes in muscle physiology in sheep. Nevertheless, meat quality of transported sheep can be improved by electrical stimulation post-slaughter. 

scholarly journals Freezing, thawing and aging improves the tenderness of chuck muscles from young bulls of different phenotypes

2014 ◽  
Vol 1 (1) ◽  
Author(s):  
María Salud Rubio-Lozano ◽  
Esmeralda Vanessa Pérez-Buitrón ◽  
Rubén Danilo Méndez-Medina ◽  
Adrián Chávez-Gómez ◽  
Enrique Jesús Delgado-Suárez
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Quality Attributes ◽  
Beef Tenderness ◽  
Young Bull ◽  
Teres Major ◽  
Potential Impact

We evaluated eleven chuck muscles from phenotypically selected Brahman (BR, n =10) and Charolais (CH, n =10) young bull carcasses for the effect of freezing, thawing, and aging for 2, 9, 16, and 23 days on Warner-Bratzler shear force(WBSF) Splenius, infraspinatus, teres major, rhomboideus, and subscapularis from both phenotypes, and complexus from CH had tender (≤ 40 N) 9 d WBSF values. No further improvement in WBSF was observed beyond 9 days of aging. Overall, we observed freezing, thawing and aging of several chuck muscles from young bulls significantly improves beef tenderness. Further studies would help optimizing this tenderization strategy and assess its potential impact on other meat quality attributes.

scholarly journals The Meat Quality and Sensory Characteristics of Turkish Native Sheep Genotypes

2021 ◽  
Vol 9 (6) ◽  
pp. 961-967
Author(s):  
Engin Yaralı
Keyword(s):  
Fatty Acids ◽  
Meat Quality ◽  
Shear Force ◽  
Saturated Fatty Acids ◽  
Monounsaturated Fatty Acids ◽  
Cooking Loss ◽  
Sensory Characteristics ◽  
Longissimus Dorsi ◽  
Drip Loss ◽  
Muscle Types

Some meat quality and sensory characteristics were determined of Kıvırcık (n=10), Eşme Kıvırcık (n=10), Karya (n=8) and Çine Çaparı (n=9) lambs in this research. Carcass divided into two parts along the spine and the three different type of muscle samples were taken from the between 8th and 9th vertebrae, 12th and 13th vertebrae and leg part of the left side of the carcasses. Drip loss, cooking loss and shear force values of these muscles were identified. Additionally, pH0, pH24, color, fatty acid composition and sensory properties were determined in M. Longissimus dorsi samples. When muscle types are evaluated separately were a statistically significant factor in terms of dripping and cooking loss and shear force. While the highest dripping loss were reported in M. Longissimus dorsi (3.72%), the highest cooking loss were reported in M. Longissimus thoracis (22.67%) and the highest shear force were reported in M. semitendinosus (4.38 kg). Genotype and muscle interaction were found to be highly significant for only cooking loss. The analysis results for fatty acids indicated that there was an important difference between Kıvırcık, Eşme Kıvırcık, Karya and Çine Çaparı on C10:0, C12:0, C14:0, C15:0, C16:0, tC18:1, CLA, tC18:3, C20:1, C22:0 fatty acids in the study. Genotypes showed no effect to SFA (Saturated fatty acids), MUFA (Monounsaturated fatty acids), PUFA (Polyunsaturated fatty acids) and P/S ratio parameters. Karya lambs performed higher for odor and tenderness, and Kıvırcık lambs showed a higher score for juiciness, flavor and total acceptability in sensory evaluation.

Polymorphisms in A-FABP gene associated with meatquality traits of beef cattle in Gansu

2017 ◽  
Author(s):  
Xuejiao An ◽  
Yongqing L. ◽  
Shengguo Zhao ◽  
Yuliang Wen ◽  
Yuan Cai
Keyword(s):  
Beef Cattle ◽  
Meat Quality ◽  
Shear Force ◽  
Ph Value ◽  
Cooking Loss ◽  
Sequencing Analysis ◽  
Quality Traits ◽  
Marbling Score ◽  
Meat Quality Traits ◽  
Fabp Gene

The polymorphisms of A-FABP gene which associated with meat quality traits of beef cattle divided in five groups(Qingyang native beef cattle group, Pingliang native beef cattle group, Qinchuan beef cattle group, South Devon beef crossbreed group, Simmental beef crossbreed group) in Gansu was studied. Three types of bands defined as genotypes GG, GC and CC were discovered in the study. According to the results we could find the mutation of c. 408 g > c existed in A- FABP gene’s exon3 area by sequencing analysis of gene in three different kinds. The analysis of A-FABP gene polymorphisms associated with meat quality traits like pressing lose, shear force, cooking loss, marbling score, meat color and pH value, showed that pressing loss with genotype GG was significantly greater than genotype CC (P less than 0.05), shear force with genotype GG was significantly greater than genotype GC and genotype CC (P less than 0.01), cooking loss and pH value with genotype GG were significantly greater than genotype GC (P less than 0.05) and genotype CC (P less than 0.01). This mutation of A-FABP gene could be considered as a locus associated with meat quality traits.

Sign in / Sign up

Export Citation Format

Share Document