scholarly journals 784. Efficiency of Quaternary Ammonium Disinfectants against SARS-CoV-2 and Coronavirus 229E

2021 ◽  
Vol 8 (Supplement_1) ◽  
pp. S488-S489
Author(s):  
Charles P Gerba
Keyword(s):  
Quaternary Ammonium ◽  
Quaternary Ammonium Compound ◽  
Ammonium Compound ◽  
Research Support ◽  
Human Coronavirus ◽  
Virus Transfer ◽  
Human Coronaviruses ◽  
Plastic Surfaces ◽  
The Impact ◽  
Finger Pad

Abstract Background The recent pandemic of CoVid19 has increased our need to assess the impact of disinfectants on the inactivation of human coronaviruses. The goals of this study were 1) quantify the disinfection of SARS-CoV-2 and human coronavirus 229 inactivations by various quaternary ammonium formulations, and 2) demonstrate the impact of disinfectants on preventing fomite-to-finger transfer of coronaviruses. Methods We compared the inactivation of both SARS-Covid -2 and coronavirus 229E suspended in 5% fetal calf sera and dried on both metal and plastic surfaces. In addition, studies were conducted with a silinated quaternary ammonium compound that left a residual on the surface. Studies were also conducted on the finger transfer of coronavirus from various surfaces. The virus was allowed to dry on the surface for 30 minutes, then a transfer was conducted by placing the finger pad directly onto the contaminated surface. The finger was tested for the virus. The study was then repeated with virus-contaminated porcelain surfaces that were sprayed with a quaternary product or placed on a surface with a quaternary ammonium compound that left a residual. Results Several readily available quaternary ammonium formulations were evaluated and proved to be effective with greater than a 99.9% reduction in titer after drying on both metal and plastic surfaces. In addition, a silinated quaternary ammonium compound that left a residual on the surface was capable of inactivating SARS-CoV-2 for at least seven days after application. Studies on the finger transfer of coronavirus from various surfaces showed that the amount of virus transfer to the finger varied from 0.46 to 49.0% depending upon the surface. Little or no virus transfer occurred from treated surfaces compared to the untreated controls. In addition, coronavirus 229E appears to be a good model for use in disinfection assessments for SARS-CoV-2. Conclusion Our results demonstrate that various quaternary ammonium disinfectant formulations are effective against human coronaviruses. Finger transfer tests showed that transmission of coronavirus from surfaces can be prevented, reducing the risk of fomite transmission. Coronavirus 229E appears to be a good model for use in disinfection assessments for SARS-CoV-2. Disclosures Charles P. Gerba, Ph.D., Allied Biosciences (Grant/Research Support)Behr (Grant/Research Support)Corning Inc. (Grant/Research Support)PPG (Grant/Research Support)Procter and Gamble (Other Financial or Material Support, donation)Rickett and Coleman (Grant/Research Support)

scholarly journals Prevalence and Detection of qac Genes from Disinfectant-Resistant Staphylococcus aureus Isolated from Salon Tools in Ishaka Town, Bushenyi District of Uganda

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Solange Gahongayire ◽  
Adamu Almustapha Aliero ◽  
Charles Drago Kato ◽  
Alice Namatovu
Keyword(s):  
Sodium Hypochlorite ◽  
Quaternary Ammonium ◽  
Bacterial Infections ◽  
Healthcare Providers ◽  
Quaternary Ammonium Compound ◽  
Diffusion Method ◽  
Ammonium Compound ◽  
Bacterial Strains ◽  
Microbiological Methods ◽  
Phenotypic Methods

Bacterial infections are on a rise with causal-resistant strains increasing the economic burden to both patients and healthcare providers. Salons are recently reported as one of the sources for transmission of such resistant bacterial strains. The current study aimed at the identification of the prevalent bacteria and characterization of quaternary ammonium compound (qac) genes from disinfectant-resistant S. aureus isolated from salon tools in Ishaka town, Bushenyi District of Uganda. A total of 125 swabs were collected from different salon tools (combs, brushes, scissors, clippers, and shaving machines), and prevalent bacteria were isolated using standard microbiological methods. Identification of isolated bacteria was done using standard phenotypic methods including analytical profile index (API). Susceptibility patterns of the isolated bacteria to disinfectant were determined using the agar well diffusion method. Quaternary ammonium compound (qac) genes (qacA/B and qacC) associated with disinfectant resistances were detected from disinfectant-resistant S. aureus using multiplex polymerase chain reaction (PCR) and Sanger sequencing methods. Of the 125 swab samples collected from salons, 78 (62.4%) were contaminated with different bacteria species. Among the salon tools, clippers had the highest contamination of 20 (80.0%), while shaving machines had the lowest contamination of 11 (44.0%). The most prevalent bacteria identified were Staphylococcus epidermidis (28.1%) followed by S. aureus (26.5%). Of all the disinfectants tested, the highest resistance was shown with sodium hypochlorite 1%. Out of the eight (8) disinfectant-resistant S. aureus analysed for qac genes, 2 (25%) isolates (STP6 and STP9) were found to be qacA/B positive, while 2 (25%) isolates (STP8 and STP9) were found to be qacC gene positive. This study has shown that bacterial contamination of salon tools is common, coupled with resistance to disinfectants with sodium hypochlorite resistance being more common. Furthermore, observed resistance was attributed to the presence of qac genes among S. aureus isolates. A search for qac genes for disinfectant resistance from other bacteria species is recommended.

Building a Better Quaternary Ammonium Compound (QAC): Branched Tetracationic Antiseptic Amphiphiles

ChemMedChem ◽  
2016 ◽  
Vol 11 (13) ◽  
pp. 1401-1405 ◽  
Author(s):  
Megan E. Forman ◽  
Megan C. Jennings ◽  
William M. Wuest ◽  
Kevin P. C. Minbiole
Keyword(s):  
Quaternary Ammonium ◽  
Quaternary Ammonium Compound ◽  
Ammonium Compound

scholarly journals Uptake of p-Nitrophenol (PNP) from model aqueous solutions using raw and quaternised Afromomum melegueta peels

2020 ◽  
Vol 1 (1) ◽  
pp. 1-8
Author(s):  
J. Ndiritu ◽  
I W. Mwangi ◽  
J. I. Murungi ◽  
R. N. Wanjau
Keyword(s):  
Quaternary Ammonium ◽  
Anthropogenic Activities ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Ammonium Compound ◽  
Cellulose Structure ◽  
Experimental Parameters ◽  
Ftir Technique ◽  
Design Simplicity ◽  
The Impact

 Anthropogenic activities contribute large amounts of pollutants to the environment which threaten animal and human health. There is increased realization of the effect of these toxins on surface and ground water, consequently, their elimination is vital in rendering secure water for drinking as well as culpable release of effluents to our habitats. Phenolic compounds cause serious health effects to both humans and animals; a p-Nitrophenol concentration of 1 ppb changes the taste and odour of water as well as meat and fish quality. In humans, exposure to PNP causes eye and skin burns while its interaction with blood leads to confusion, cyanosis and unconsciousness. It is imperative therefore to find ways for removing PNP from water. Among the available techniques for removing PNP from water, adsorption is more convenient and offers more advantages because of its design, simplicity, and operating flexibility. The present study involved application of peels of raw Afromomum melegueta (RAM) and quaternised Afromomum melegueta (QAM) to remove PNP from water through adsorption. The raw adsorbents were modified with a quaternary ammonium salt to improve their uptake efficiency. The impact of experimental parameters; contact time, pH, sorbent dose, temperature and concentration were investigated. Attenuated FTIR technique was employed to characterize the adsorbent materials. It was established that the quaternary ammonium compound was anchored chemically within the cellulose structure of Afromomum melegueta peels. The behavior of adsorption of PNP was investigated using Langmuir and Freundlich isotherm models. The physical sorption load was 8.70 and 106.38 mg/g for RAM and QAM peels respectively from Langmuir adsorption equation. Uptake of PNP is high at the first 30 mins of contact and at sorbent dosage of 0.01 g and 0.03 g for RAM and QAM respectively. Quantity of PNP removed increases as the initial concentration rises however, adsorption decreases after a concentration exceeding 30 mg/L. The ideal pH and temperature for PNP removal is at pH 3 and 25 ˚C respectively. In conclusion, the findings suggest that Afromomum melegueta peels can be friendly to the environment, cheap biosorbents and efficient which can be applied for the uptake of PNP from drinking water

Sign in / Sign up

Export Citation Format

Share Document