scholarly journals Ceramic Micropalaeontology

Author(s):  
Ian Wilkinson ◽  
Patrick Quinn ◽  
Mark Williams ◽  
Jeremy Taylor ◽  
Ian Whitbread

Microfossils found in archaeological ceramics include representatives of kingdoms Fungi, Protista, Plantae, and Animalia and are composed of calcite, silica, or resistant organic compounds capable of withstanding firing. Methods by which microfossils are isolated for study vary considerably, but the best results involve the disaggregation of potsherds into their individual grains or by cutting petrological thin sections. Microfossils can be related directly to the age and depositional environment of the source materials (clays, temper, and slip) used in the manufacturing process, although the introduction of contaminants at the time of construction must also be recognized. When incorporated into an integrated analysis, the microfossils may demonstrate provenance; contribute to a better understanding of the local environment and landscape; identify transportation routes; contribute to an understanding of the technology used, including construction methods and firing; and elucidate the use to which the vessels were put.

Author(s):  
Ian Whitbread

Fabric description is fundamental to the characterization, technological analysis and provenance determination of archaeological ceramics. It encompasses description of the arrangement, size, shape, frequency and composition of ceramic material constituents. These properties are used to identify the raw materials, their processing, vessel construction methods, and firing conditions. The process of description should, so far as possible, be an objective record of observed fabric properties that is independent of interpretations concerning technology and provenance. Fabric descriptions are made of ceramics in hand specimen and of samples prepared as thin sections for examination under a polarizing microscope. Rapid evaluation of fabric properties in the field is achieved by studying hand specimens using a magnifying glass or stereomicroscope. Laboratory-based analysis of thin sections provides more accurate and comprehensive identification of fabric properties, especially mineral and rock fragments in coarse fabrics, in terms of qualitative and quantitative data.


Author(s):  
Marta Mariotti Lippi ◽  
Pasquino Pallecchi

Organic inclusions in ceramics may occur naturally in clay deposits or be intentionally added to the paste as temper. In the first case, the inclusions are composed of entire microscopic organisms and/or parts of microscopic and macroscopic plants and animals found in the local environment. In the second case, the plant or animal tempers are specifically selected, used alone or mixed with other organic or inorganic tempers, and come from a wide variety of geographic and ecological contexts. During firing, organic compounds undergo partial to complete destruction; charred organic materials or their heat-resistant remnants are nevertheless useful for the identification of their origin. The use of different tempers provides valuable information about ceramic technologies and regional potting traditions. In addition, organic inclusions may demarcate the geographical area of ceramic manufacture, the depositional environment of the clay, and/or ancient agricultural practices in the area of production.


Geosciences ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 294
Author(s):  
Raymond H. Johnson ◽  
Susan M. Hall ◽  
Aaron D. Tigar

At a former uranium pilot mill in Grand Junction, Colorado, mine tailings and some subpile sediments were excavated to various depths to meet surface radiological standards, but residual solid-phase uranium below these excavation depths still occurs at concentrations above background. The combination of fission-track radiography and scanning electron microscope energy-dispersive X-ray spectroscopy (SEM-EDS) provides a uniquely efficient and quantitative way of determining mineralogic associations of uranium that can influence uranium mobility. After the creation of sample thin sections, a mica sheet is placed on those thin sections and irradiated in a nuclear research reactor. Decay of the irradiated uranium creates fission tracks that can be viewed with a microscope. The fission-track radiography images indicate thin section sample areas with elevated uranium that are focus areas for SEM-EDS work. EDS spectra provide quantitative elemental data that indicate the mineralogy of individual grains or grain coatings associated with the fission-track identification of elevated uranium. For the site in this study, the results indicated that uranium occurred (1) with coatings of aluminum–silicon (Al/Si) gel and gypsum, (2) dispersed in the unsaturated zone associated with evaporite-type salts, and (3) sorbed onto organic carbon. The Al/Si gel likely formed when low-pH waters were precipitated during calcite buffering, which in turn retained or precipitated trace amounts of Fe, As, U, V, Ca, and S. Understanding these mechanisms can help guide future laboratory and field-scale efforts in determining long-term uranium release rates to groundwater.


2021 ◽  
Vol 877 (1) ◽  
pp. 012030
Author(s):  
Maha Razaq Manhi ◽  
Hamid Ali Ahmed Alsultani

Abstract The Mauddud Formation is Iraq’s most significant and widely distributed Lower Cretaceous formation. This Formation has been investigated at a well-23 and a well-6 within Ratawi oil field southern Iraq. In this work, 75 thin sections were produced and examined. The Mauddud Formation was deposited in a variety of environments within the carbonate platform. According to microfacies analysis studying of the Mauddud Formation contains of twelve microfacies, this microfacies Mudstone to wackestone microfacies, bioclastic mudstone to wackestone microfacies, Miliolids wackestone microfacies,Orbitolina wackestone microfacies, Bioclastic wackestone microfacies, Orbitolina packstone microfacies, Peloidal packstone microfacies, Bioclastic packstone microfacies, Peloidal to Bioclastic packstone microfacies, Bioclastic grainstone microfacies, Peloidal grainstone microfacies, Rudstone microfacies. Deep sea, Shallow open marine, Restricted, Rudist Biostrome, Mid – Ramp, and Shoals are the six depositional environments in the Mauddud Formation based on these microfacies.


2004 ◽  
Vol 36 (1) ◽  
pp. 607 ◽  
Author(s):  
I. Vakalas ◽  
G. Ananiadis ◽  
A. Zelilidis ◽  
N. Kontopoulos ◽  
B. Tsikouras

A number of polished thin sections from two cross sections within the Pindos foreland deposits were petrographically examined while microanalyses on certain minerals were carried out. Chemistry of these minerals is compared to analogous phases occurring in several formations in the neighbourhood of the studied areas which can stand as source areas. Our results reveal that the most probable source materials include the Pindos, Koziakas (and probably and Vourinos) ophiolite complexes, as well as metamorphic sequences of the Pelagonian Zone


2017 ◽  
Vol 4 (1) ◽  
pp. 11-20
Author(s):  
Saleh A. Lazam

"Mineralogical, Petorographic Microfacies study has been done on (16) samples of Zahraa formation (Pliocene – Pleistocene) of outcrop in Surrounded Sawa Lake area. The mineralogical study showed that Calcite is the main mineral within the rock formation, whereas the upper rocks of Zahraa Formation consist silty or sandy claystone is dominant in the middle and the upper portion, in addition to quartz, clay minerals, iron oxide and organic matter as insoluble residues. From thin sections study, Three main microfacies have been identified which are: Charophyte shelly bioclastic wackestone, Charophyte shelly bioclastic dolowackestone and Algal wackestone. Based on microfacies study and its fossils content, it has been possible to determine the depositional environment of Zahraa Formation which deposits in the area of the presence of Charaphytes, indicates fresh water environment. From the depositioal situation and the large extension in the project area, the type of fresh water environment is ephemeral freshen water lakes."


Terr Plural ◽  
2021 ◽  
Vol 15 ◽  
pp. e2119456
Author(s):  
Elvio Pinto Bosetti ◽  
◽  
Lucinei Jose Myszynski Junior ◽  
Daniel Sedorko ◽  
Luana Oliveira ◽  
...  

The urban area of Ponta Grossa (PR) occurs on one of the most abundant fossiliferous fields in the country, which records an endemic fauna that occurred in the Devonian of the Paraná Basin. The growing urbanization of the city increasingly buries these outcrops, and new works must be accompanied by a specialized team to safeguard the paleontological heritage. This is the case of the Bosque Mistral project, which exposed many layers of the Ponta Grossa Formation, rich in fossils and trace fossils. This study reports the main fossiliferous occurrences in the section, correlates the section with classical outcrops from the literature, and interprets the main depositional environments as well stratigraphic cycles using an integrated analysis of sedimentology and ichnology. The ichnological distribution also evidences the retrogradation pattern, and, particularly, the occurrence of ichnofabrics dominated by Zoophycos at the top of the section is a signature of high-frequency cycles associated with the transgressive systems tract. Macrofossill biodiversity varies according to the facies, in the sandy and silty layers different organisms from the muddy layers occur. In the former, the epibiont fauna (mainly trilobites and brachiopods) is predominant while in the muddy layers the predominance is the endobiont and semi-endobiont fauna (bivalve mollusks and infaunal brachiopods). In other words, the distribution of taxa across the layers is not random.


1996 ◽  
Vol 462 ◽  
Author(s):  
Eric F. Hansen ◽  
Carlos Rodriguez-Navarro ◽  
Richard D. Hansen

ABSTRACTPatterned technological behaviors in the production and use of burnt-lime products can be characterized using optical microscopy and image analysis of pétrographie thin-sections to determine the texture (supplemented by X-ray diffraction analysis). Variations in technological styles have been identified in 21 samples from the ancient Maya site of Nakbe, Petén, Guatemala dating to the Middle Preclassic (1,000 B. C. - 300 B. C.) and Late Preclassic (300 B. C. - 150 A. D.) periods. Middle Preclassic floors exhibit a chaotic texture with a highly random aggregate particle size. Late Preclassic modeled stucco or painted fragments have a well-sorted texture with a low acid-insoluble content (<2%). Load -bearing mortar dating from the early Late Preclassic has a matrix with a high acid insoluble content (>15%), the major phases being quartz (-10%) and clays (∼5%). The variations correlate both with the time of occurrence and the function of the end-product. These issues of construction methods and levels of technology contribute data to aid our understanding of cultural development in this area at a critical time when the Maya were formulating power structures.


2021 ◽  
Author(s):  
Catherine Breislin ◽  
Laura Galluccio ◽  
Kate Al Tameemi ◽  
Riaz Khan ◽  
Atef Abdelaal

Abstract Understanding reservoir architecture is key to comprehend the distribution of reservoir quality when evaluating a field's prospectivity. Renewed interest in the tight, gas-rich Middle Miocene anhydrite intervals (Anh-1, Anh-2, Anh-3, Anh-4 and Anh-6) by ADNOC has given new impetus to improving its reservoir characterisation. In this context, this study provides valuable new insights in geological knowledge at the field scale within a formation with limited existing studies. From a sedimentological point of view, the anhydrite layers of the Miocene Formation, Anh-1, Anh-2, Anh-3, Anh-4 and Anh-6 (which comprise three stacked sequences: Bur1, Bur2 and Bur3; Hardenbol et al., 1998), have comparable depositional organisation throughout the study area. Bur1 and Bur2 are characterised by an upward transition from intertidal-dominated deposits to low-energy inner ramp-dominated sedimentation displaying reasonably consistent thickness across the area. Bur3 deposits imply an initial upward deepening from an argillaceous intertidal-dominated to an argillaceous subtidal-dominated setting, followed by an upward shallowing into intertidal and supratidal sabkha-dominated environments. This Bur3 cycle thickens towards the south-east due to a possible deepening, resulting in the subtle increase in thickness of the subtidal and intertidal deposits occurring around the maximum-flooding surface. The interbedded relationship between the thin limestone and anhydrite layers within the intertidal and proximal inner ramp deposits impart strong permeability anisotropy, with the anhydrite acting as significant baffles to vertical fluid flow. A qualitative reservoir quality analysis, combining core sedimentology data from 10 wells, 331 CCA data points, 58 thin-sections and 10 SEM samples has identified that reservoir layers Anh-4 and Anh-6 contain the best porosity and permeability values, with the carbonate facies of the argillaceous-prone intertidal and distal inner ramp deposits hosting the best reservoir potential. Within these facies, the pore systems within the carbonate facies are impacted by varying degrees of dolomitisation and dissolution which enhance the pore system, and cementation (anhydrite and calcite), which degrade the pore system. The combination of these diagenetic phases results in the wide spread of porosity and permeability data observed. The integration of both the sedimentological features and diagenetic overprint of the Middle Miocene anhydrite intervals shows the fundamental role played by the depositional environment in its reservoir architecture. This study has revealed the carbonate-dominated depositional environment groups within the anhydrite stratigraphic layers likely host both the best storage capacity and flow potential. Within these carbonate-dominated layers, the thicker, homogenous carbonate deposits would be more conducive to vertical and lateral flow than thinner interbedded carbonates and anhydrites, which may present as baffles or barriers to vertical flow and create significant permeability anisotropy.


2021 ◽  
Author(s):  
Victoria S. Engelschiøn ◽  
Øyvind Hammer ◽  
Fredrik Wesenlund ◽  
Jørn H. Hurum ◽  
Atle Mørk

&lt;p&gt;Several carbon isotope curves were recently published for the Early and Middle Triassic in Tethys. Recent work has also been done on the Early Triassic of Svalbard, but not yet for the Middle Triassic. This work is the first to measure &amp;#948;&lt;sup&gt;13&lt;/sup&gt;C for different Middle Triassic localities on Svalbard, which was then part of the Boreal Ocean on northern Pangea. Our aim is to understand the controls on the Svalbard carbon isotope curve and to place them in a global setting.&lt;/p&gt;&lt;p&gt;Correlating Triassic rocks around the world is interesting for several reasons. The Triassic Period was a tumultuous time for life, and the Arctic archipelago of Svalbard has shown to be an important locality to understand the early radiation of marine vertebrates in the Triassic. Much effort is also made to understand the development of the Barents Sea through Svalbard&amp;#8217;s geology.&lt;/p&gt;&lt;p&gt;Carbon isotope curves are controlled by depositional environment and global fluctuations. Global factors such as the carbon cycle control the long-term carbon isotopic compositions, while short-term fluctuations may reflect the origin of organic materials in the sediment (e.g. algal or terrestrial matter), stratification of the water column, and/or surface water productivity. Carbon isotopes can therefore be useful to understand the depositional environment and to correlate time-equivalent rocks globally.&lt;/p&gt;&lt;p&gt;The dataset was collected through three seasons of fieldwork in Svalbard with localities from the islands Spitsbergen, Edge&amp;#248;ya and Bj&amp;#248;rn&amp;#248;ya. Detailed stratigraphic sampling has resulted in high-resolution &amp;#948;&lt;sup&gt;13&lt;/sup&gt;C curves. These show three strong transitions; 1) on the boundary between the Early and Middle Triassic, 2) in the middle of the formation and 3) at the Middle and Late Triassic boundary. Several Tethyan localities show a possibly similar Early-Middle Triassic signal. Current work in progress is sedimentological analysis by thin sections and X-ray fluorescence spectroscopy (XRF) to further understand the sedimentary environment.&lt;/p&gt;


Sign in / Sign up

Export Citation Format

Share Document