THE INFLUENCE OF THE INITIAL WATER CONTENT ON THE REDISTRIBUTION OF SOIL WATER AFTER INFILTRATION

Soil Science ◽  
1983 ◽  
Vol 135 (5) ◽  
pp. 275-281 ◽  
Author(s):  
A. POULOVASSILIS
Keyword(s):  
Water Content ◽  
Soil Water ◽  
Initial Water Content ◽  
Initial Water

scholarly journals Effect of initial gravimetric water content and cyclic wetting-drying on soil-water characteristic curves of disintegrated carbonaceous mudstone

2019 ◽  
Vol 1 (3) ◽  
pp. 230-240
Author(s):  
Ling Zeng ◽  
Fan Li ◽  
Jie Liu ◽  
Qianfeng Gao ◽  
Hanbing Bian
Keyword(s):  
Water Content ◽  
Soil Water ◽  
Characteristic Curve ◽  
Initial Water Content ◽  
Test Results ◽  
Initial Water ◽  
Soil Water Characteristic Curves ◽  
Water Holding ◽  
Gravimetric Water Content ◽  
Plate Apparatus

Abstract The soil-water characteristic curve (SWCC) is often used to estimate unsaturated soil properties (e.g. strength, permeability, volume change, solute and thermal diffusivity). The SWCC of soil samples is significantly affected by cyclic wetting-drying. To examine how water content and cyclic wetting-drying affect the SWCC of disintegrated carbonaceous mudstone (DCM), SWCC tests were implemented using a pressure-plate apparatus. In addition, SWCC models for DCM considering the initial gravimetric water content and cyclic wetting-drying were developed. The test results showed that the volumetric water content (θ) of the DCM first decreased rapidly and then became stable as matric suction (s) increased. The initial water content affected the SWCC by altering the pore structure of the DCM. For a given number of wetting-drying cycles, the higher the initial water content, the higher the stabilized θ. At a given s value, θ decreased as the number of wetting-drying cycles increased, which suggests that cyclic wetting-drying reduces the water-holding capacity of DCM. The Gardner model for DCM was constructed considering initial water content and cyclic wetting-drying, and was effective at describing and predicting the SWCC model for DCM.

scholarly journals Responses of Soil Infiltration to Water Retention Characteristics, Initial Conditions, and Boundary Conditions

Land ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 361
Author(s):  
Lesheng An ◽  
Kaihua Liao ◽  
Chun Liu
Keyword(s):  
Water Content ◽  
Soil Water ◽  
Water Retention ◽  
Constant Pressure ◽  
Pressure Head ◽  
Estimation Methods ◽  
Initial Water Content ◽  
Initial Water ◽  
Cumulative Infiltration ◽  
Retention Characteristics

(1) Background: Simulation of soil water infiltration process and analysis of its influencing factors are important for water resources management. (2) Methods: In this study, the relative contributions of the soil water retention characteristics (SWRC) estimation, initial water content, and constant pressure head at upper boundary to the cumulative infiltration under various soil conditions were quantified based on the 1-D Richards’ equation and 900 scenarios. Scenario simulations were performed for two SWRC estimation methods (Jensen method and Rosetta); three different initial water contents (0.15, 0.20, and 0.25 cm3/cm3); five different constant pressure heads (0.5, 1, 2, 4, and 8 cm); and thirty soil samples with varying texture and bulk density. (3) Results: Rosetta representing the drying branch of the SWRC yielded higher simulated cumulative infiltration compared with the Jensen method representing the wetting branch of the SWRC. However, the Jensen method–predicted cumulative infiltration fluxes matched well with the measured values with a low RMSE of 0.80 cm. (4) Conclusions: The relative contribution of the SWRC estimation method to cumulative infiltration (19.1–72.2%) was compared to that of constant pressure head (14.0–65.5%), and generally greater than that of initial water content (2.2–29.9%). Findings of this study have practical significance for investigating the transport of water, nutrients, and contaminants in the unsaturated zone.

Study on the Tests of Soil-Water Characteristic Curves of Unsaturated Soil

2013 ◽  
Vol 353-356 ◽  
pp. 16-19
Author(s):  
Xian Chun Zheng ◽  
Fang Zhao ◽  
Si Zhong Sun
Keyword(s):  
Water Content ◽  
Soil Water ◽  
Unsaturated Soil ◽  
Characteristic Curve ◽  
Initial Water Content ◽  
Initial Water ◽  
Soil Water Characteristic Curve ◽  
The Matrix ◽  
Practical Engineering ◽  
Matrix Suction

Soil-water characteristic curve is used to describe the matrix suction and water content of the curve of the relationship between volume, according to the soil-water characteristic curve can be deduced the unsaturated soil shear strength, permeability coefficient, etc., this paper gives the different initial water content and different types of soil, soil-water characteristic curve for practical engineering foundation reinforcement to provide reference.

SOIL WATER CHARACTERISTIC CURVES OF COMPACTED KAOLIN FOR VARIOUS INITIAL MOISTURE CONTENT

2015 ◽  
Vol 76 (2) ◽  
Author(s):  
Muhammad Azril Hezmi ◽  
Radzuan Saari ◽  
Mohd Zakri Zahari ◽  
Rini Asnida Abdullah ◽  
Nor Zurairahetty Mohd Yunus ◽  
...  
Keyword(s):  
Water Content ◽  
Soil Water ◽  
Filter Paper ◽  
Unsaturated Soils ◽  
Initial Moisture Content ◽  
Great Influence ◽  
Water Retention Curve ◽  
Initial Water Content ◽  
Initial Water ◽  
The Relationship

The soil water characteristic curve (SWCC), also known as soil water retention curve (SWRC), describes the relationship between water content and soil suction in unsaturated soils. The importance of SWCC can be seen, as the relationship affects geotechnical properties such as shear strength, volume change, permeability and deformability of unsaturated soils. This paper presented a preliminary study on the effect of initial water content and the density on SWCC on unsaturated compacted kaolin. Filter paper technique was used for suction measurement on the unsaturated compacted kaolin soil. Filter paper was used to determine total suction and matric suction through contact and noncontact technique. The calibration curve was used to relate with the gravimetric water content obtained in filter paper with corresponding suction. A comparison on SWCC established through filter paper was also compared with that of the axis translation technique (pressure plate extractor). The study found that the initial water content and the density respectively, have great influence on the SWCC of compacted kaolin. However, the combined effect could be seen significantly at lower suction

Experimental investigations of the soil-water characteristics of a volcanic soil

2000 ◽  
Vol 37 (6) ◽  
pp. 1252-1264 ◽  
Author(s):  
Charles WW Ng ◽  
Y W Pang
Keyword(s):  
Stress State ◽  
Water Content ◽  
Soil Water ◽  
Characteristic Curve ◽  
Hysteresis Loops ◽  
Initial Water Content ◽  
Volcanic Soil ◽  
Initial Water ◽  
Pressure Plate ◽  
Water Characteristics

Rain-induced landslides are common around the world. To analyse transient seepage and to predict pore-water pressure distribution in unsaturated slopes subjected to rainfall infiltration, it is essential to study soil-water characteristics and water permeability functions. The soil-water characteristic curve (SWCC) is a relationship between suction and water content or degree of saturation. Conventionally, only the drying soil-water characteristic curve of soil specimens is determined in a pressure-plate extractor without the application of any external stress. In this paper, the influences of initial dry density and initial water content, history of drying and wetting, soil structure, and the stress state upon the desorption and adsorption soil-water characteristics of a completely decomposed volcanic soil in Hong Kong are examined and discussed. The experimental results presented are obtained by using a conventional volumetric pressure-plate extractor and a newly modified one-dimensional stress-controllable pressure-plate extractor with deformation measurements. The SWCC of a recompacted specimen is very different from that of a natural specimen with the same initial soil density and initial water content. The SWCC of the recompacted specimen is highly dependent on the history of drying and wetting. The rates of desorption and adsorption are substantially higher at the first drying and wetting cycle than at the second drying and wetting cycle. The size of the hysteresis loop of the recompacted specimen is considerably larger than that of the natural specimens. The SWCC of soil is stress-state dependent. For recompacted specimens subjected to different stress states, the higher the applied stresses, the lower the rate of desorption and the smaller the size of the hysteresis loops. However, for natural specimens, the size of the hysteresis loops seems to be independent of the stress state. Under a higher applied stress, natural specimens exhibit lower rates of desorption and adsorption.Key words: volcanic soil, SWCC, drying and wetting, stress-state dependent.

Influence of initial water content and strain rate on remolded yield stress in marine clay

2021 ◽  
pp. 1-8
Author(s):  
Xiaobing Li ◽  
Jianpeng Chen ◽  
Xiuqing Hu ◽  
Hongtao Fu ◽  
Jun Wang ◽  
...  
Keyword(s):  
Strain Rate ◽  
Water Content ◽  
Yield Stress ◽  
Initial Water Content ◽  
Marine Clay ◽  
Initial Water

scholarly journals Application of the Calorimetric Methods to the Characteristics of Seeds from Olives

Proceedings ◽  
2020 ◽  
Vol 70 (1) ◽  
pp. 90
Author(s):  
Andrzej Bryś ◽  
Joanna Bryś ◽  
Marko Obranović ◽  
Dubravka Škevin ◽  
Szymon Głowacki ◽  
...  
Keyword(s):  
Olive Oil ◽  
Water Content ◽  
Cooling System ◽  
Waste Product ◽  
Normal Pressure ◽  
Ash Content ◽  
Initial Water Content ◽  
Scanning Calorimetry ◽  
Initial Water

The olive oil industry represents an important productive sector in the Mediterranean basin countries. Olive stone is an essential by-product generated in the olive oil extraction industries and it represents roughly 10% by weight of the olive fruit. The seeds of pickled olives are also a significant waste product. In the present study, we have investigated the possibility of the use of differential scanning calorimetry for the thermal characterization of seeds from green and black pickled olives from Croatia. The differential scanning calorimeter (DSC) with a normal pressure cell equipped with a cooling system was used to determine the thermal properties of seeds from olives. The following analyses were also performed: the determination of calorific values in a pressure bomb calorimeter, the determination of initial water content, the determination of changes of water content during drying at the temperatures of 30 °C, 50 °C and 80 °C, the determination of a percentage content of seeds mass to the mass of the whole olives, and the determination of ash content. Seeds from olives are characterized by very good parameters as a biomass. The analyzed olive seeds were characterized by low water content, low ash content, and a relatively high caloric value.

scholarly journals Effects of Initial Water Content on Microstructure and Mechanical Properties of Lean Clay Soil Stabilized by Compound Calcium-Based Stabilizer

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 1933 ◽  
Author(s):  
Chenglong Yin ◽  
Wei Zhang ◽  
Xunli Jiang ◽  
Zhiyi Huang
Keyword(s):  
Water Content ◽  
Soil Stabilization ◽  
Clay Soil ◽  
Soil Aggregates ◽  
Optical Microscope ◽  
Initial Water Content ◽  
Reaction Products ◽  
Unconfined Compression Test ◽  
Initial Water ◽  
X Ray

Initial water content significantly affects the efficiency of soil stabilization. In this study, the effects of initial water content on the compressibility, strength, microstructure, and composition of a lean clay soil stabilized by compound calcium-based stabilizer were investigated by static compaction test, unconfined compression test, optical microscope observations, environment scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. The results indicate that as the initial water content increases in the range studied, both the compaction energy and the maximum compaction force decrease linearly and there are less soil aggregates or agglomerations, and a smaller proportion of large pores in the compacted mixture structure. In addition, for specimens cured with or without external water supply and under different compaction degrees, the variation law of the unconfined compressive strength with initial water content is different and the highest strength value is obtained at various initial water contents. With the increase of initial water content, the percentage of the oxygen element tends to increase in the reaction products of the calcium-based stabilizer, whereas the primary mineral composition of the soil-stabilizer mixture did not change notably.

Sign in / Sign up

Export Citation Format

Share Document