scholarly journals Manganese molybdate nanoflakes on silicon microchannel plates as novel nano energetic material

2017 ◽  
Vol 4 (12) ◽  
pp. 171229 ◽  
Author(s):  
Chi Zhang ◽  
Dajun Wu ◽  
Liming Shi ◽  
Yiping Zhu ◽  
Dayuan Xiong ◽  
...  
Keyword(s):  
Energetic Materials ◽  
Energetic Material ◽  
3D Structure ◽  
Three Dimensional ◽  
Ionic Diffusion ◽  
Ordered Structures ◽  
Microchannel Plates ◽  
Potential Applications

Nano energetic materials have attracted great attention recently owing to their potential applications for both civilian and military purposes. By introducing silicon microchannel plates (Si-MCPs) three-dimensional (3D)-ordered structures, monocrystalline MnMoO 4 with a size of tens of micrometres and polycrystalline MnMoO 4 nanoflakes are produced on the surface and sidewall of nickel-coated Si-MCP, respectively. The MnMoO 4 crystals ripen controllably forming polycrystalline nanoflakes with lattice fringes of 0.542 nm corresponding to the ( 1 ¯ 11 ) plane on the sidewall. And these MnMoO 4 nanoflakes show apparent thermite performance which is rarely reported and represents MnMoO 4 becoming a new category of energetic materials after nanocrystallization. Additionally, the nanocrystallization mechanism is interpreted by ionic diffusion caused by 3D structure. The results indicate that the Si-MCP is a promising substrate for nanocrystallization of energetic materials such as MnMoO 4 .

scholarly journals A Novel Pseudomonas geniculata AGE Family Epimerase/Isomerase and Its Application in d-Mannose Synthesis

Foods ◽  
2020 ◽  
Vol 9 (12) ◽  
pp. 1809
Author(s):  
Zhanzhi Liu ◽  
Ying Li ◽  
Jing Wu ◽  
Sheng Chen
Keyword(s):  
3D Structure ◽  
Three Dimensional ◽  
Optimal Temperature ◽  
Reaction Conditions ◽  
Enzymatic Production ◽  
Physiological Properties ◽  
Potential Applications ◽  
Kinetics Of ◽  
Optimal Reaction ◽  
Gene Age

d-mannose has exhibited excellent physiological properties in the food, pharmaceutical, and feed industries. Therefore, emerging attention has been applied to enzymatic production of d-mannose due to its advantage over chemical synthesis. The gene age of N-acetyl-d-glucosamine 2-epimerase family epimerase/isomerase (AGEase) derived from Pseudomonas geniculata was amplified, and the recombinant P. geniculata AGEase was characterized. The optimal temperature and pH of P. geniculata AGEase were 60 °C and 7.5, respectively. The Km, kcat, and kcat/Km of P. geniculata AGEase for d-mannose were 49.2 ± 8.5 mM, 476.3 ± 4.0 s−1, and 9.7 ± 0.5 s−1·mM−1, respectively. The recombinant P. geniculata AGEase was classified into the YihS enzyme subfamily in the AGE enzyme family by analyzing its substrate specificity and active center of the three-dimensional (3D) structure. Further studies on the kinetics of different substrates showed that the P. geniculata AGEase belongs to the d-mannose isomerase of the YihS enzyme. The P. geniculata AGEase catalyzed the synthesis of d-mannose with d-fructose as a substrate, and the conversion rate was as high as 39.3% with the d-mannose yield of 78.6 g·L−1 under optimal reaction conditions of 200 g·L−1d-fructose and 2.5 U·mL−1P. geniculata AGEase. This novel P. geniculata AGEase has potential applications in the industrial production of d-mannose.

scholarly journals Synthesis of Three-Dimensional Fe3O4/Graphene Aerogels for the Removal of Arsenic Ions from Water

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Yan Ye ◽  
Da Yin ◽  
Bin Wang ◽  
Qingwen Zhang
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
3D Structure ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Aerogels ◽  
Transmission Electron ◽  
Potential Applications ◽  
Removal Of Arsenic

We report the synthesis of three-dimensional Fe3O4/graphene aerogels (GAs) and their application for the removal of arsenic (As) ions from water. The morphology and properties of Fe3O4/GAs have been characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and superconducting quantum inference device. The 3D nanostructure shows that iron oxide nanoparticles are decorated on graphene with an interconnected network structure. It is found that Fe3O4/GAs own a capacity of As(V) ions adsorption up to 40.048 mg/g due to their remarkable 3D structure and existence of magnetic Fe3O4nanoparticles for separation. The adsorption isotherm matches well with the Langmuir model and kinetic analysis suggests that the adsorption process is pseudo-second-ordered. In addition to the excellent adsorption capability, Fe3O4/GAs can be easily and effectively separated from water, indicating potential applications in water treatment.

Three-Dimensional Graphite Filled Poly(Vinylidene Fluoride) Composites with Enhanced Strength and Thermal Conductivity

2020 ◽  
Vol 842 ◽  
pp. 63-68
Author(s):  
Xiao Zhang ◽  
Jian Zheng ◽  
Yong Qiang Du ◽  
Chun Ming Zhang
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Energetic Materials ◽  
High Performance ◽  
Vinylidene Fluoride ◽  
3D Structure ◽  
Three Dimensional ◽  
3D Network ◽  
Poly Vinylidene Fluoride ◽  
Polymer Bonded Explosives

Three-dimensional (3D) network structure has been recognized as an efficient approach to enhance the mechanical and thermal conductive properties of polymeric composites. However, it has not been applied in energetic materials. In this work, a fluoropolymer based composite with vertically oriented and interconnected 3D graphite network was fabricated for polymer bonded explosives (PBXs). Here, the graphite and graphene oxide platelets were mixed, and self-assembled via rapid freezing and using crystallized ice as the template. The 3D structure was finally obtained by freezing-dry, and infiltrating with polymer. With the increasing of filler fraction and cooling rate, the thermal conductivity of the polymer composite was significantly improved to 2.15 W m-1 K-1 by 919% than that of pure polymer. Moreover, the mechanical properties, such as tensile strength and elastic modulus, were enhanced by 117% and 563%, respectively, when the highly ordered structure was embedded in the polymer. We attribute the increased thermal and mechanical properties to this 3D network, which is beneficial to the effective heat conduction and force transfer. This study supports a desirable way to fabricate the strong and thermal conductive fluoropolymer composites used for the high-performance polymer bonded explosives (PBXs).

Potential Applications of Bacterial Cellulose in Environmental and Pharmaceutical Sectors

2020 ◽  
Vol 26 (45) ◽  
pp. 5793-5806
Author(s):  
Mazhar Ul-Islam ◽  
Salman Ul-Islam ◽  
Sumayia Yasir ◽  
Atiya Fatima ◽  
Md. Wasi Ahmed ◽  
...  
Keyword(s):  
Bacterial Cellulose ◽  
3D Structure ◽  
Three Dimensional ◽  
Base Material ◽  
Advanced Materials ◽  
Ex Situ ◽  
Potential Applications ◽  
Wide Readership ◽  
Water Filters

Biopolymers and their composites have been extensively investigated in recent years for multiple applications, especially in environmental, medical, and pharmaceutical fields. Bacterial cellulose (BC) has emerged as a novel biomaterial owing to its nontoxic, high-liquid absorbing and holding capacity, drug-carrying ability, and pollutant absorbing features. Additionally, its web-shaped three-dimensional (3D) structure and hydrogen bonding sites have incited a combination of various nanoparticles, polymers, and other materials with BC in the form of composites. Such BC-based composites have been developed through in-situ, ex-situ, and solution casting methods for targeted applications, such as air and water filters, controlled drug delivery systems, wound dressing materials, and tissue regeneration. This review details the production and development of BCbased composites with different materials and by various methods. It further describes various applications of BC-based composites in the environmental and pharmaceutical sectors, with specific examples from the recent literature. This review could potentially appeal a wide readership in these two emerging fields, where novel and advanced materials for different applications have been developed on a regular basis using BC as the base material.

scholarly journals Animatronic soft robots by additive folding

2018 ◽  
Vol 37 (6) ◽  
pp. 611-628 ◽  
Author(s):  
S Yim ◽  
C Sung ◽  
S Miyashita ◽  
D Rus ◽  
S Kim
Keyword(s):  
3D Structure ◽  
Three Dimensional ◽  
Computational Design ◽  
Fabrication Technology ◽  
Soft Robots ◽  
Design Algorithm ◽  
New Class ◽  
3D Geometry ◽  
Potential Applications ◽  
3D Assembly

This paper presents a new class of animatronic soft robots created by a desktop fabrication mechanism called additive folding. In this method, two-dimensional (2D) slices are threaded by multiple strings, accordion-folded by flexure hinges and finally stacked into a predefined three-dimensional (3D) structure. As the 3D assembly of the slices is controlled by embedded strings, it becomes an animatronic soft robot that moves like a biological creature and that shows life-like movements. We create a computational design algorithm that takes as input a desired 3D geometry of the robot, and that produces a 2D surface with built-in folds and string-based actuators. This paper describes the entire robot design process and demonstrates various animatronic motions, highlighting the vision of desktop fabrication technology and its potential applications in animatronics and robotic art.

Methods for three-dimensional reconstruction of cellular components within a thick section

1986 ◽  
Vol 44 ◽  
pp. 18-21
Author(s):  
J. Frank ◽  
B. F. McEwen ◽  
M. Radermacher ◽  
C. L. Rieder
Keyword(s):  
Tilt Angle ◽  
Tomographic Reconstruction ◽  
3D Structure ◽  
Three Dimensional ◽  
Thick Section ◽  
Three Dimensional Reconstruction ◽  
Axis Ratio ◽  
Dimensional Reconstruction ◽  
Cellular Components

The tomographic reconstruction from multiple projections of cellular components, within a thick section, offers a way of visualizing and quantifying their three-dimensional (3D) structure. However, asymmetric objects require as many views from the widest tilt range as possible; otherwise the reconstruction may be uninterpretable. Even if not for geometric obstructions, the increasing pathway of electrons, as the tilt angle is increased, poses the ultimate upper limitation to the projection range. With the maximum tilt angle being fixed, the only way to improve the faithfulness of the reconstruction is by changing the mode of the tilting from single-axis to conical; a point within the object projected with a tilt angle of 60° and a full 360° azimuthal range is then reconstructed as a slightly elliptic (axis ratio 1.2 : 1) sphere.

Cryomicroscopy of crotoxin complex crystals at 400 KV

1989 ◽  
Vol 47 ◽  
pp. 826-827
Author(s):  
Jaap Brink ◽  
Wah Chiu
Keyword(s):  
Signal To Noise Ratio ◽  
3D Structure ◽  
Three Dimensional ◽  
Carbon Films ◽  
Depth Of Field ◽  
Basic Subunit ◽  
Ewald Sphere ◽  
Diffraction Patterns ◽  
Complex Crystals ◽  
Acidic Subunit

The crotoxin complex is a potent neurotoxin composed of a basic subunit (Mr = 12,000) and an acidic subunit (M = 10,000). The basic subunit possesses phospholipase activity whereas the acidic subunit shows no enzymatic activity at all. The complex's toxocity is expressed both pre- and post-synaptically. The crotoxin complex forms thin crystals suitable for electron crystallography. The crystals diffract up to 0.16 nm in the microscope, whereas images show reflections out to 0.39 nm2. Ultimate goal in this study is to obtain a three-dimensional (3D-) structure map of the protein around 0.3 nm resolution. Use of 100 keV electrons in this is limited; the unit cell's height c of 25.6 nm causes problems associated with multiple scattering, radiation damage, limited depth of field and a more pronounced Ewald sphere curvature. In general, they lead to projections of the unit cell, which at the desired resolution, cannot be interpreted following the weak-phase approximation. Circumventing this problem is possible through the use of 400 keV electrons. Although the overall contrast is lowered due to a smaller scattering cross-section, the signal-to-noise ratio of especially higher order reflections will improve due to a smaller contribution of inelastic scattering. We report here our preliminary results demonstrating the feasability of the data collection procedure at 400 kV.Crystals of crotoxin complex were prepared on carbon-covered holey-carbon films, quench frozen in liquid ethane, inserted into a Gatan 626 holder, transferred into a JEOL 4000EX electron microscope equipped with a pair of anticontaminators operating at −184°C and examined under low-dose conditions. Selected area electron diffraction patterns (EDP's) and images of the crystals were recorded at 400 kV and −167°C with dose levels of 5 and 9.5 electrons/Å, respectively.

EMCAT: An automatic image-processing system for electron-microscopic tomography

1994 ◽  
Vol 52 ◽  
pp. 418-419
Author(s):  
Weiping Liu ◽  
John W. Sedat ◽  
David A. Agard
Keyword(s):  
Image Processing ◽  
Structural Information ◽  
Imaging Technique ◽  
Three Dimensional ◽  
Processing System ◽  
Electron Microscopic ◽  
Data Set ◽  
Ordered Structures ◽  
Automatic Image Processing ◽  
Em Tomography

Any real world object is three-dimensional. The principle of tomography, which reconstructs the 3-D structure of an object from its 2-D projections of different view angles has found application in many disciplines. Electron Microscopic (EM) tomography on non-ordered structures (e.g., subcellular structures in biology and non-crystalline structures in material science) has been exercised sporadically in the last twenty years or so. As vital as is the 3-D structural information and with no existing alternative 3-D imaging technique to compete in its high resolution range, the technique to date remains the kingdom of a brave few. Its tedious tasks have been preventing it from being a routine tool. One keyword in promoting its popularity is automation: The data collection has been automated in our lab, which can routinely yield a data set of over 100 projections in the matter of a few hours. Now the image processing part is also automated. Such automations finish the job easier, faster and better.

Detection, Averaging, and 3D Reconstruction of Biological Specimens on Hypercubes (Transputer-based) Computers

1990 ◽  
Vol 48 (1) ◽  
pp. 454-455
Author(s):  
Jose-Maria Carazo ◽  
I. Benavides ◽  
S. Marco ◽  
J.L. Carrascosa ◽  
E.L. Zapata
Keyword(s):  
3D Reconstruction ◽  
3D Structure ◽  
Three Dimensional ◽  
Software Tools ◽  
Mapping Method ◽  
Computer Architectures ◽  
Parallel Computer ◽  
Reconstruction Process ◽  
Computing Power ◽  
Order Of Magnitude

Obtaining the three-dimensional (3D) structure of negatively stained biological specimens at a resolution of, typically, 2 - 4 nm is becoming a relatively common practice in an increasing number of laboratories. A combination of new conceptual approaches, new software tools, and faster computers have made this situation possible. However, all these 3D reconstruction processes are quite computer intensive, and the middle term future is full of suggestions entailing an even greater need of computing power. Up to now all published 3D reconstructions in this field have been performed on conventional (sequential) computers, but it is a fact that new parallel computer architectures represent the potential of order-of-magnitude increases in computing power and should, therefore, be considered for their possible application in the most computing intensive tasks.We have studied both shared-memory-based computer architectures, like the BBN Butterfly, and local-memory-based architectures, mainly hypercubes implemented on transputers, where we have used the algorithmic mapping method proposed by Zapata el at. In this work we have developed the basic software tools needed to obtain a 3D reconstruction from non-crystalline specimens (“single particles”) using the so-called Random Conical Tilt Series Method. We start from a pair of images presenting the same field, first tilted (by ≃55°) and then untilted. It is then assumed that we can supply the system with the image of the particle we are looking for (ideally, a 2D average from a previous study) and with a matrix describing the geometrical relationships between the tilted and untilted fields (this step is now accomplished by interactively marking a few pairs of corresponding features in the two fields). From here on the 3D reconstruction process may be run automatically.

Sign in / Sign up

Export Citation Format

Share Document