scholarly journals Effects of temperature gradient and particle size on self-ignition temperature of low-rank coal excavated from inner Mongolia, China

2019 ◽  
Vol 6 (9) ◽  
pp. 190374 ◽  
Author(s):  
Yongjun Wang ◽  
Xiaoming Zhang ◽  
Hemeng Zhang ◽  
Kyuro Sasaki

This study investigates the effects of temperature gradient and coal particle size on the critical self-ignition temperature T CSIT of a coal pile packed with low-rank coal using the wire-mesh basket test to estimate T CSIT based on the Frank–Kamenetskii equation. The values of T CSIT , the temperature gradient and the apparent activation energy of different coal pile volumes packed with coal particles of different sizes are measured. The supercriticality or subcriticality of the coal is assessed using a non-dimensional index I HR based on the temperature gradient at the temperature cross-point between coal and ambient temperatures for coal piles with various volumes and particle sizes. The critical value I HRC at the boundary between supercriticality and subcriticality is determined as a function of pile volume. The coal status of supercritical or subcritical can be separated by critical value of I HR as a function of pile volume. Quantitative effects of coal particle size on T CSIT of coal piles are measured for constant pile volume. It can be concluded that a pile packed with smaller coal particles is more likely to undergo spontaneous combustion, while the chemical activation energy is not sensitive to coal particle size. Finally, the effect of coal particle size on T CSIT is represented by the inclusion of an extra term in the equation giving T CSIT for a coal pile.

2021 ◽  
Vol 1 (2) ◽  
pp. 041-048
Author(s):  
Benson Chinweuba Udeh

This study is on the production of quicklime from Ashaka limestone through calcination process. Effects of temperature, particle size and time on quicklime yield were determined. The experiment was carried out at temperatures of 800, 900, 1000, 1100 and 1200 0C, particle sizes of 80mm, 90mm, 100mm, 300mm and 425mm and times of 0.5hr, 1hr, 2hrs, 3hrs and 4hrs. Analyses of the results showed that quicklime was successfully produced from Ashaka limestone through the calcination process. Quadratic model adequately described the relationship between quicklime yield and calcination factors of temperature, particle size and time. Recorded model F-value of 134.35 implies that the model is significant. The predicted R² of 0.9597 is in reasonable agreement with the adjusted R² of 0.9844; the difference is less than the critical value of 0.2. Optimum yield of 73.48% was obtained at optima operating conditions; temperature of 1000 0C, particle size of 90 µm and time of 3 hrs.


Author(s):  
You Zhou ◽  
Boris Albijanic ◽  
Shiwei Wang ◽  
Guosheng Li ◽  
Xiangnan Zhu

2021 ◽  
Vol 228 ◽  
pp. 01015
Author(s):  
Yueling Zhang ◽  
Shengyue Ma ◽  
Jing Xiao ◽  
Yajun Tian ◽  
Kechang Xie

Understanding the ignition mechanism of spontaneous combustion is critical for preventing it. In this work, the effects of different test conditions including oxygen concentration, heating rate, oxidation carrier gas flow rate, and sample amount on the ignition temperature were studied with a thermal gravimetric analyzer. Further, the effects of coal properties on the ignition temperature were also investigated using 15 different low-rank coals. A heterogenous ignition model was proposed that small amount of active species is the key material leading to ignition. The heterogenous ignition mechanism well explained the complex effects of test conditions and coal properties on the ignition temperature of low-rank coal. Finally, an empirical formula for predicting the ignition temperature was derived for the rapid assessment of the spontaneous combustion potential.


2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Lei Li ◽  
Zhongguang Sun ◽  
Fakai Wang ◽  
Kaizhi Zhang

AbstractThe prediction of dangerous hazards in working faces is an important link to prevent coal and gas outbursts. Improving the accuracy of predictive indicators is of great significance for reducing the phenomenon of being prominently below the critical value and ensuring safe production. The fixed-size desorption index K1 is one of the important indicators for coal face and gas outburst prediction. Based on the diffusion theory and the physical meaning of fixed-size coal samples, the mathematical expression of K1 is established by the self-developed high/low temperature pressure swing adsorption-desorption experimental system. According to the equation, the effects of gas pressure, loss time, coal particle size and diffusion coefficient on K1 are studied. The results show that the K1 index is logarithmically related to the gas pressure. Under the same conditions, the longer the loss time is, the smaller the measured K1 is, and the smaller the particle sizes of the drill cuttings are, the more notable the performance is; the diffusion coefficient represents the ability of gas to bypass micropores and the coal matrix. The greater the ability to bypass the matrix is, the larger the diffusion coefficient under the same conditions is, and the larger K1 is; the coal particle size has a greater influence on K1, and the smaller the size is, the more likely it is that the phenomenon of being prominently below the critical value occurs. Therefore, the particle size composition of coal during on-site measurements is crucial for obtaining the true K1 and the exact critical values.


Minerals ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 452 ◽  
Author(s):  
Guoqiang Rong ◽  
Yangchao Xia ◽  
Youfei Zhang ◽  
Fangyu Guo ◽  
Dongyue Wang ◽  
...  

The floatability of fine low-rank coal particles can be greatly influenced by their morphological characteristics, such as shape and surface roughness. In this study, the attachment efficiency and detachment amplitude of fine low-rank coal particles produced by various comminution methods onto/from the bubble surface were investigated using homemade bubble–particle wrap angle and bubble–particle attachment/detachment testing systems. Results showed that the length–diameter ratio of rod-milled products was smaller than that of crushed products. The wrap angle of particles obtained by the crushed method was larger than that obtained by the rod-milled method, i.e., particles with greater length–diameter ratio showed higher attachment efficiency onto the bubble surface. Meanwhile, particles with greater length–diameter ratio exhibited a larger detachment amplitude, which suggests that it is more difficult to be detached from the bubble surface. However, rod-milled products showed lower attachment onto the bubble surface. The flotation test confirmed that the floatability ratio of crushed products was higher than that of rod-milled products, consistent with evidence from experimental analyses. This study provides a fundamental understanding of particle shapes for low-rank coal flotation by a novel research method combining the attachment efficiency and detachment amplitude of bubble–particle combinations.


Sign in / Sign up

Export Citation Format

Share Document