scholarly journals Bakerian Lecture: Stereochemical types and valency groups

The arrangements in space of the covalencies of a polyvalent atom , while they are subject to small variations seldom exceeding 5 or 10°, tend to conform to quite a limited number of types. It is desirable to relate this grouping to some familiar property of theatom . The property here used is the size (in G. N. Lewis’s sense) of the valency group of the centralatom , and the number of shared electrons which it contains, together with that of the preceding (unshared) electronic group in the atom . The experimental results show the following relations. I. When the valency group is less than 8 we have with a covalency of 2 a linear structure (as in Cl-Hg-Cl), and with one of 3 a plane with equal angles of 120° (as in BF 3 ). II. With a complete octet the arrangement can be either tetrahedral or planar. When the covalency is less than 4 it is always derived from the tetrahedron, as in the triangular OH 2 and th e pyramidal NH 3 . The fully shared octet is always tetrahedral when the preceding group ( n in the grouping ( n ) 8) is 2, 8, or 18. In the transitional elements where 8 < n < 18, it is tetrahedral if n is not much more than 8, and planar if it is not much less than 18; but the two series overlap. III. When there are 10 valency electrons, at least 2 of them (the “inert pair”) unshared, the structure with a dicovalent atom (as in M[I 3 ]) is linear: that of a 4-eovalent atom is found in the thallous and plumbous salts to be planar, but in tellurium tetrachloride it may be a distorted tetrahedron. IV . The peculiar 4-covalent duodecet in M[ICl 4 ] is planar. V. A covalency of 5 is always found to give a trigonal bipyramid. VI. Covalency 6. Three structures are theoretically possible, a trigonal prism, a trigonal antiprism , and a regular octahedron. Experimentally the octahedron is always found, except in a few giant molecules such as those with a nickel-arsenide lattice. The regular octahedron has been found with practically every possible size of the preceding group, as well as with the “inert pair” of electrons. VII. A covalency of 7 can have two different structures, one derived from the octahedron and the other from the trigonal prism. VIII. Covalency 8. The only com pound exam ined, K 4 [Mo(CN) 8 ], has a dodecahedral arrangement of the 8 CN groups. Nearly (but not quite) all the structures can be even more simply related to the size of the valency group by assuming that the mean positions of the electron pairs in this group are the same whether they are shared or not, the structure being linear for 4 electrons, plane symmetrical for 6, either tetra­hedral or plane for 8, a trigonal bipyramid for 10, and an octahedron for 12.

1972 ◽  
Vol 50 (2) ◽  
pp. 217-225 ◽  
Author(s):  
A. M. Bize ◽  
J. Soussen-Jacob ◽  
J. Vincent-Geisse ◽  
D. Legay ◽  
J. P. Perchard

The band width and profile of v3 mode of carbonyl sulfide (OCS) dissolved in about 30 solvents have been examined. The study of temperature broadening permits the separation of the vibrational and rotational effects and the determination of the potential barrier to rotation. Correlation functions have been plotted from the experimental results; the mean squared torques acting on carbonyl sulfide in various solvents have been calculated from the second and the fourth moments. The obtained results bear evidence of a dominant rotational effect for solutions in saturated hydrocarbons while, for the other solvents, vibrational broadening proves important.


The author finds that in all long pillars of the same dimensions, the resistance to crushing by flexure is about three times greater when the ends of the pillars are flat, than when they are rounded. A long uniform cast-iron pillar, with its ends firmly fixed, whether by means of disks or otherwise, has the same power to resist breaking as a pillar of the same diameter, and half the length, with the ends rounded, or turned so that the force would pass through the axis. The strength of a pillar with one end round and the other flat, is the arithmetical mean between that of a pillar of the same dimensions with both ends round, and one with both ends flat. Some additional strength is given to a pillar by enlarging its diameter in the middle part. The author next investigated the strength of long cast-iron pillars with relation to their diameter and length. He concludes that the index of the power of the diameter, to which the strength is proportional, is 3·736. He then proceeds to determine, by a comparison of experimental results, the inverse power of the length to which the strength of the pillar is proportional. The highest value of this power is 1·914, the lowest, 1·537, the mean of all the comparisons, 1·7117. He thus deduces, first, approximate empirical formulae for the breaking weight of solid pillars, and then proceeds to deduce more correct methods of determining their strength.


1993 ◽  
Vol 69 (01) ◽  
pp. 035-040 ◽  
Author(s):  
A M H P van den Besselaar ◽  
R M Bertina

SummaryFour thromboplastin reagents were tested by 18 laboratories in Europe, North-America, and Australasia, according to a detailed protocol. One thromboplastin was the International Reference Preparation for ox brain thromboplastin combined with adsorbed bovine plasma (coded OBT/79), and the second was a certified reference material for rabbit brain thromboplastin, plain (coded CRM 149R). The other two thromboplastin reagents were another rabbit plain brain thromboplastin (RP) with a lower ISI than CRM 149R and a rabbit brain thromboplastin combined with adsorbed bovine plasma (RC). Calibration of the latter two reagents was performed according to methods recommended by the World Health Organization (W. H. O.).The purpose of this study was to answer the following questions: 1) Is the calibration of the RC reagent more precise against the bovine/combined (OBT/79) than against the rabbit/plain reagent (CRM 149R)? 2) Is the precision of calibration influenced by the magnitude of the International Sensitivity Index (ISI)?The lowest inter-laboratory variation of ISI was observed in the calibration of the rabbit/plain reagent (RP) against the other rabbit/plain reagent (CRM 149R) (CV 1.6%). The highest interlaboratory variation was obtained in the calibration of rabbit/plain (RP) against bovine/combined (OBT/79) (CV 5.1%). In the calibration of the rabbit/combined (RC) reagent, there was no difference in precision between OBT/79 (CV 4.3%) and CRM 149R (CV 4.2%). Furthermore, there was no significant difference in the precision of the ISI of RC obtained with CRM 149R (ISI = 1.343) and the rabbit/plain (RP) reagent with ISI = 1.14. In conclusion, the calibration of RC could be performed with similar precision with either OBT/79 or CRM 149R, or RP.The mean ISI values calculated with OBT/79 and CRM 149R were practically identical, indicating that there is no bias in the ISI of these reference preparations and that these reference preparations have been stable since their original calibration studies in 1979 and 1987, respectively.International Normalized Ratio (INR) equivalents were calculated for a lyophilized control plasma derived from patients treated with oral anticoagulants. There were small but significant differences in the mean INR equivalents between the bovine and rabbit thromboplastins. There were no differences in the interlaboratory variation of the INR equivalents, when the four thromboplastins were compared.


1979 ◽  
Vol 42 (04) ◽  
pp. 1073-1114 ◽  

SummaryIn collaborative experiments in 199 laboratories, nine commercial thromboplastins, four thromboplastins held by the National Institute for Biological Standards and Control (NIBS & C), London and the British Comparative Thromboplastin were tested on fresh normal and coumarin plasmas, and on three series of freeze-dried plasmas. One of these was made from coumarin plasmas and the other two were prepared from normal plasmas; in each series, one plasma was normal and the other two represented different degrees of coumarin defect.Each thromboplastin was calibrated against NIBS&C rabbit brain 70/178, from the slope of the line joining the origin to the point of intersection of the mean ratios of coumarin/normal prothrombin times when the ratios obtained with the two thromboplastins on the same fresh plasmas were plotted against each other. From previous evidence, the slopes were calculated which would have been obtained against the NIBS&C “research standard” thromboplastin 67/40, and termed the “calibration constant” of each thromboplastin. Values obtained from the freeze-dried coumarin plasmas gave generally similar results to those from fresh plasmas for all thromboplastins, whereas values from the artificial plasmas agreed with those from fresh plasmas only when similar thromboplastins were being compared.Taking into account the slopes of the calibration lines and the variation between laboratories, precision in obtaining a patient’s prothrombin time was similar for all thromboplastins.


1985 ◽  
Vol 54 (04) ◽  
pp. 739-743 ◽  
Author(s):  
Federica Delaini ◽  
Elisabetta Dejana ◽  
Ine Reyers ◽  
Elisa Vicenzi ◽  
Germana De Bellis Vitti ◽  
...  

SummaryWe have investigated the relevance of some laboratory tests of platelet function in predicting conditions of thrombotic tendency. For this purpose, we studied platelet survival, platelet aggregation in response to different stimuli, TxB2 and 6-keto-PGFlα production in serum of rats bearing a nephrotic syndrome induced by adriamycin. These animals show a heavy predisposition to the development of both arterial and venous thrombosis. The mean survival time was normal in nephrotic rats in comparison to controls. As to aggregation tests, a lower aggregating response was found in ADR-treated rats using ADP or collagen as stimulating agents. With arachidonic acid (AA) we observed similar aggregating responses at lower A A concentrations, whereas at higher AA concentrations a significantly lower response was found in nephrotic rats, despite their higher TxB2 production. Also TxB2 and 6-keto-PGFlα levels in serum of nephrotic rats were significantly higher than in controls. No consistent differences were found in PGI2-activity generated by vessels of control or nephrotic rats.These data show that platelet function may appear normal or even impaired in rats with a markedly increased thrombotic tendency. On the other hand, the significance of high TxB2 levels in connection with mechanisms leading to thrombus formation remains a controversial issue.


2004 ◽  
Vol 9 (3) ◽  
pp. 233-240 ◽  
Author(s):  
S. Kim

This paper describes a Voronoi analysis method to analyze a soccer game. It is important for us to know the quantitative assessment of contribution done by a player or a team in the game as an individual or collective behavior. The mean numbers of vertices are reported to be 5–6, which is a little less than those of a perfect random system. Voronoi polygons areas can be used in evaluating the dominance of a team over the other. By introducing an excess Voronoi area, we can draw some fruitful results to appraise a player or a team rather quantitatively.


1994 ◽  
Vol 29 (4) ◽  
pp. 127-132 ◽  
Author(s):  
Naomi Rea ◽  
George G. Ganf

Experimental results demonstrate bow small differences in depth and water regime have a significant affect on the accumulation and allocation of nutrients and biomass. Because the performance of aquatic plants depends on these factors, an understanding of their influence is essential to ensure that systems function at their full potential. The responses differed for two emergent species, indicating that within this morphological category, optimal performance will fall at different locations across a depth or water regime gradient. The performance of one species was unaffected by growth in mixture, whereas the other performed better in deep water and worse in shallow.


1997 ◽  
Vol 35 (2-3) ◽  
pp. 131-138 ◽  
Author(s):  
Pirjo-Riitta Rantala ◽  
Hannu Wirola

The aim of the study was to determine if solid, slightly soluble compounds can be used as nutrient source in activated sludge treatment plants instead of liquid phosphoric acid. Four different solid materials were tested in lab-scale solubility tests to find compounds which are least soluble. Two materials were chosen for further studies: apatite and raw phosphate. The use of apatite and raw phosphate as nutrient source was studied in lab-scale activated sludge reactors along with a control reactor where phosphorus was added in liquid form. The phosphorus dosage, measured as elementary phosphorus, was the same for all three reactors. The reactors were fed with pre-clarified chemi-thermomechanical pulp mill (CTMP) wastewater. There were no significant differences in the reductions of organic matter between the three reactors. The mean effluent concentration of total phosphorus was 3 mg P/l in the control reactor and less than 1 mg P/1 in the other two reactors. The soluble phosphorus concentration was more than 2 mg P/l in the control reactor and less than 0.5 mg P/l in the other two. Apatite was an even better nutrient source than raw phosphate. Further lab-scale tests were conducted using two different grain sizes of apatite. No significant differences were found between the studied grain sizes (&lt;0.074 mm and 0.074 mm-0.125 mm). Apatite was then used in full-scale at a CTMP-mill two different times. The experiments showed that the mean concentrations of phosphorus can be reduced radically by using apatite as a nutrient source instead of liquid phosphorus. Solid phosphorus compounds are a viable alternative to reduce the phosphorus load from forest industry wastewater treatment plants.


Author(s):  
Mehrdad Rafiepourgatabi ◽  
Alistair Woodward ◽  
Jennifer A. Salmond ◽  
Kim Natasha Dirks

Children walking to school are at a high risk of exposure to air pollution compared with other modes because of the time they spend in close proximity to traffic during their commute. The aim of this study is to investigate the effect of a walker’s route choice on their exposure to ultrafine particles (UFP) on the walk to school. During morning commutes over a period of three weeks, exposure to UFP was measured along three routes: two routes were alongside both sides of a busy arterial road with significantly higher levels of traffic on one side compared to the other, and the third route passed through quiet streets (the background route). The results indicate that the mean exposure for the pedestrian walking along the background route was half the exposure experienced on the other two routes. Walkers on the trafficked side were exposed to elevated concentrations (>100,000 pt/cc) 2.5 times longer than the low-trafficked side. However, the duration of the elevated exposure for the background route was close to zero. Public health officials and urban planners may use the results of this study to promote healthier walking routes to schools, especially those planned as part of organized commutes.


2021 ◽  
Vol 40 (1) ◽  
pp. 551-563
Author(s):  
Liqiong Lu ◽  
Dong Wu ◽  
Ziwei Tang ◽  
Yaohua Yi ◽  
Faliang Huang

This paper focuses on script identification in natural scene images. Traditional CNNs (Convolution Neural Networks) cannot solve this problem perfectly for two reasons: one is the arbitrary aspect ratios of scene images which bring much difficulty to traditional CNNs with a fixed size image as the input. And the other is that some scripts with minor differences are easily confused because they share a subset of characters with the same shapes. We propose a novel approach combing Score CNN, Attention CNN and patches. Attention CNN is utilized to determine whether a patch is a discriminative patch and calculate the contribution weight of the discriminative patch to script identification of the whole image. Score CNN uses a discriminative patch as input and predict the score of each script type. Firstly patches with the same size are extracted from the scene images. Secondly these patches are used as inputs to Score CNN and Attention CNN to train two patch-level classifiers. Finally, the results of multiple discriminative patches extracted from the same image via the above two classifiers are fused to obtain the script type of this image. Using patches with the same size as inputs to CNN can avoid the problems caused by arbitrary aspect ratios of scene images. The trained classifiers can mine discriminative patches to accurately identify some confusing scripts. The experimental results show the good performance of our approach on four public datasets.


Sign in / Sign up

Export Citation Format

Share Document