scholarly journals Work that body: fin and body movements determine herbivore feeding performance within the natural reef environment

2020 ◽  
Vol 287 (1938) ◽  
pp. 20201903
Author(s):  
Tal Perevolotsky ◽  
Christopher H. Martin ◽  
Asaph Rivlin ◽  
Roi Holzman
Keyword(s):  
High Speed ◽  
Three Dimensional ◽  
The Body ◽  
Reef Environment ◽  
Feeding Performance ◽  
Locomotory Performance ◽  
Feeding Bout ◽  
Functional Mechanisms ◽  
New Framework

Herbivorous fishes form a keystone component of reef ecosystems, yet the functional mechanisms underlying their feeding performance are poorly understood. In water, gravity is counter-balanced by buoyancy, hence fish are recoiled backwards after every bite they take from the substrate. To overcome this recoil and maintain contact with the algae covered substrate, fish need to generate thrust while feeding. However, the locomotory performance of reef herbivores in the context of feeding has hitherto been ignored. We used a three-dimensional high-speed video system to track mouth and body kinematics during in situ feeding strikes of fishes in the genus Zebrasoma , while synchronously recording the forces exerted on the substrate. These herbivores committed stereotypic and coordinated body and fin movements when feeding off the substrate and these movements determined algal biomass removed. Specifically, the speed of rapidly backing away from the substrate was associated with the magnitude of the pull force and the biomass of algae removed from the substrate per feeding bout. Our new framework for measuring biting performance in situ demonstrates that coordinated movements of the body and fins play a crucial role in herbivore foraging performance and may explain major axes of body and fin shape diversification across reef herbivore guilds.

scholarly journals A faster escape does not enhance survival in zebrafish larvae

2017 ◽  
Vol 284 (1852) ◽  
pp. 20170359 ◽  
Author(s):  
Arjun Nair ◽  
Christy Nguyen ◽  
Matthew J. McHenry
Keyword(s):  
High Speed ◽  
Larval Fish ◽  
Body Position ◽  
Three Dimensional ◽  
Limited Range ◽  
The Body ◽  
Model Parameters ◽  
Fish Prey ◽  
Zebrafish Larvae ◽  
Fish Predators

An escape response is a rapid manoeuvre used by prey to evade predators. Performing this manoeuvre at greater speed, in a favourable direction, or from a longer distance have been hypothesized to enhance the survival of prey, but these ideas are difficult to test experimentally. We examined how prey survival depends on escape kinematics through a novel combination of experimentation and mathematical modelling. This approach focused on zebrafish ( Danio rerio ) larvae under predation by adults and juveniles of the same species. High-speed three-dimensional kinematics were used to track the body position of prey and predator and to determine the probability of behavioural actions by both fish. These measurements provided the basis for an agent-based probabilistic model that simulated the trajectories of the animals. Predictions of survivorship by this model were found by Monte Carlo simulations to agree with our observations and we examined how these predictions varied by changing individual model parameters. Contrary to expectation, we found that survival may not be improved by increasing the speed or altering the direction of the escape. Rather, zebrafish larvae operate with sufficiently high locomotor performance due to the relatively slow approach and limited range of suction feeding by fish predators. We did find that survival was enhanced when prey responded from a greater distance. This is an ability that depends on the capacity of the visual and lateral line systems to detect a looming threat. Therefore, performance in sensing, and not locomotion, is decisive for improving the survival of larval fish prey. These results offer a framework for understanding the evolution of predator–prey strategy that may inform prey survival in a broad diversity of animals.

High-Speed X-Ray Imaging of Diesel Injector Needle Motion

2009 ◽  
Author(s):  
A. L. Kastengren ◽  
C. F. Powell ◽  
Z. Liu ◽  
K. Fezzaa ◽  
J. Wang
Keyword(s):  
High Speed ◽  
Three Dimensional ◽  
Linear Increase ◽  
Nozzle Geometry ◽  
X Ray ◽  
Needle Position ◽  
X Ray Imaging ◽  
Linear Oscillation ◽  
Degree Of Convergence

Phase-enhanced x-ray imaging has been used to examine the geometry and dynamics of four diesel injector nozzles. The technique uses a high-speed camera, which allows the dynamics of individual injection events to be observed in real time and compared. Moreover, data has been obtained for the nozzles from two different viewing angles, allowing for the full three-dimensional motions of the needle to be examined. This technique allows the needle motion to be determined in situ at the needle seat and requires no modifications to the injector hardware, unlike conventional techniques. Measurements of the nozzle geometry have allowed the average nozzle diameter, degree of convergence or divergence, and the degree of rounding at the nozzle inlet to be examined. Measurements of the needle lift have shown that the lift behavior of all four nozzles consists of a linear increase in needle lift with respect to time until the needle reaches full lift and a linear decrease as the needle closes. For all four nozzles, the needle position oscillates at full lift with a period of 170–180 μs. The full-lift position of the needle changes as the rail pressure increases, perhaps reflecting compression of the injector components. Significant lateral motions were seen in the two single-hole nozzles, with the needle motion perpendicular to the injector axis resembling a circular motion for one nozzle and linear oscillation for the other nozzle. The two VCO multihole nozzles show much less lateral motion, with no strong oscillations visible.

Simplified Triped Robot for Analysis of Three-Dimensional Gait Generation

2017 ◽  
Vol 29 (3) ◽  
pp. 528-535
Author(s):  
Yoichi Masuda ◽  
◽  
Masato Ishikawa
Keyword(s):  
High Speed ◽  
Force Feedback ◽  
Three Dimensional ◽  
Radial Symmetry ◽  
The Body ◽  
Walking Robots ◽  
Body Structure ◽  
Gait Patterns ◽  
Gait Generation ◽  
Proposed Model

[abstFig src='/00290003/08.jpg' width='230' text='The tripedal robot “Martian petit”' ] Significant efforts to simplify the body structure of multi-legged walking robots have been made over the years. Of these, the Spring-Loaded-Inverted-Pendulum (SLIP) model has been very popular, therefore widely employed in the design of walking robots. In this paper, we develop a SLIP-based tripedal walking robot with a focus on the geometric symmetry of the body structure. The proposed robot possesses a compact, light-weight, and compliant leg modules. These modules are controlled by a distributed control law that consists of decoupled oscillators with only local force feedback. As demonstrated through experiments, the simplified design of the robot makes possible the generation of high-speed dynamic locomotion. Despite the structural simplicity of the proposed model, the generation of several gait-patterns is demonstrated. The proposed minimalistic design approach with radial symmetry simplifies the function of each limb in the three-dimensional gait generation of the robot.

Simple mechanisms organise orientation of escape swimming in embryos and hatchling tadpoles of Xenopus laevis

2000 ◽  
Vol 203 (12) ◽  
pp. 1869-1885 ◽  
Author(s):  
A. Roberts ◽  
N.A. Hill ◽  
R. Hicks
Keyword(s):  
Mathematical Model ◽  
Xenopus Laevis ◽  
High Speed ◽  
Three Dimensional ◽  
Longitudinal Axis ◽  
The Body ◽  
Video Recordings ◽  
Stage Of Development ◽  
Physical Features ◽  
Neutrally Buoyant

Many amphibian tadpoles hatch and swim before their inner ears and sense of spatial orientation differentiate. We describe upward and downward swimming responses in hatchling Xenopus laevis tadpoles from stages 32 to 37/38 in which the body rotates about its longitudinal axis. Tadpoles are heavier than water and, if touched while lying on the substratum, they reliably swim upwards, often in a tight spiral. This response has been observed using stroboscopic photography and high-speed video recordings. The sense of the spiral is not fixed for individual tadpoles. In ‘more horizontal swimming’ (i.e. in directions within +/−30 degrees of the horizontal), the tadpoles usually swim belly-down, but this position is not a prerequisite for subsequent upward spiral swimming. Newly hatched tadpoles spend 99 % of their time hanging tail-down from mucus secreted by a cement gland on the head. When suspended in mid-water by a mucus strand, tadpoles from stage 31 to 37/38 tend to swim spirally down when touched on the head and up when touched on the tail. The three-dimensional swimming paths of stage 33/34 tadpoles were plotted using simultaneous video images recorded from the side and from above. Tadpoles spiralled for 70 % of the swimming time, and the probability of spiralling increased to 1 as swim path angles became more vertical. Tadpoles were neutrally buoyant in Percoll/water mixtures at 1.05 g cm(−)(3), in which anaesthetised tadpoles floated belly-down and head-up at 30 degrees. In water, their centre of mass was ventral to the muscles in the yolk mass. A simple mathematical model suggests that the orientation of tadpoles during swimming is governed by the action of two torques, one of which raises the head (i.e. increases the pitch) and the other rotates (rolls) the body. Consequently, tadpoles (i) swim belly-down when the body is approximately horizontal because the body is ballasted by dense yolk, and (ii) swim spirally at more vertical orientations when the ballasting no longer stabilises orientation. Measurements in tethered tadpoles show that dorsal body flexion, which could produce a dorsal pitch torque, is present during swimming and increases with tailbeat frequency. We discuss how much of the tadpole's behaviour can be explained by our mathematical model and suggest that, at this stage of development, oriented swimming responses may depend on simple touch reflexes, the organisation of the muscles and physical features of the body, rather than on vestibular reflexes.

scholarly journals The impact of pelvic lateral rotation on hindlimb kinematics and stride length in the red-legged running frog, Kassina maculata

2019 ◽  
Vol 6 (5) ◽  
pp. 190060 ◽  
Author(s):  
Amber J. Collings ◽  
Laura B. Porro ◽  
Cameron Hill ◽  
Christopher T. Richards
Keyword(s):  
High Speed ◽  
Stride Length ◽  
Reference Frames ◽  
Comparative Anatomy ◽  
Three Dimensional ◽  
Video Data ◽  
The Body ◽  
Kinematic Models ◽  
Lateral Rotation ◽  
The Impact

Some frog species, such as Kassina maculata (red-legged running frog), use an asynchronous walking/running gait as their primary locomotor mode. Prior comparative anatomy work has suggested that lateral rotation of the pelvis improves walking performance by increasing hindlimb stride length; however, this hypothesis has never been tested. Using non-invasive methods, experimental high-speed video data collected from eight animals were used to create two three-dimensional kinematic models. These models, each fixed to alternative local anatomical reference frames, were used to investigate the hypothesis that lateral rotation of the mobile ilio-sacral joint in the anuran pelvis plays a propulsive role in walking locomotion by increasing hindlimb stride length. All frogs used a walking gait (duty factor greater than 0.5) despite travelling over a range of speeds (0.04–0.23 m s −1 ). The hindlimb joint motions throughout a single stride were temporally synchronized with lateral rotation of the pelvis. The pelvis itself, on average, underwent an angular excursion of 12.71° (±4.39°) with respect to the body midline during lateral rotation. However, comparison between our two kinematic models demonstrated that lateral rotation of the pelvis only increases the cranio-caudal excursion of the hindlimb modestly. Thus, we propose that pelvic lateral rotation is not a stride length augmenting mechanism in K. maculata .

scholarly journals Three-dimensional simulation for fast forward flight of a calliope hummingbird

2016 ◽  
Vol 3 (6) ◽  
pp. 160230 ◽  
Author(s):  
Jialei Song ◽  
Bret W. Tobalske ◽  
Donald R. Powers ◽  
Tyson L. Hedrick ◽  
Haoxiang Luo
Keyword(s):  
Immersed Boundary Method ◽  
High Speed ◽  
Computational Study ◽  
Three Dimensional ◽  
The Body ◽  
Immersed Boundary ◽  
Forward Flight ◽  
Advance Ratio ◽  
Dimensional Simulation ◽  
Thrust Production

We present a computational study of flapping-wing aerodynamics of a calliope hummingbird ( Selasphorus calliope ) during fast forward flight. Three-dimensional wing kinematics were incorporated into the model by extracting time-dependent wing position from high-speed videos of the bird flying in a wind tunnel at 8.3 m s −1 . The advance ratio, i.e. the ratio between flight speed and average wingtip speed, is around one. An immersed-boundary method was used to simulate flow around the wings and bird body. The result shows that both downstroke and upstroke in a wingbeat cycle produce significant thrust for the bird to overcome drag on the body, and such thrust production comes at price of negative lift induced during upstroke. This feature might be shared with bats, while being distinct from insects and other birds, including closely related swifts.

scholarly journals Biomechanical factor affecting Baseball Pitching Velocity

2019 ◽  
Author(s):  
Yasushi Ota ◽  
Ryoga Kuriyama
Keyword(s):  
High Speed ◽  
Time Series Data ◽  
Three Dimensional ◽  
The Body ◽  
Lower Limbs ◽  
Whole Body ◽  
Series Data ◽  
Physical Factors ◽  
Body Parts ◽  
Joint Force

In baseball, pitchers have a central role and high-speed pitching is desirable. So far, several studies of the physical factors related to pitching form with the aim of improving the speed of pitched balls have been conducted. In this study, we used a motion capture to acquire three-dimensional (3D) time series data related to the speed of pitched balls and performed a kinetics analysis by using these acquired data. The acquired data were divided into five pitching phases: wind up, early cocking, late cocking, acceleration, and follow through. Our analysis identified the body parts that contribute to increasing the speed of pitched balls, i.e., the speed of rotation of individual joints and the timing/phase when power can be applied. Especially, by examining joint angular velocity and joint force, we showed that the speed of pitched balls is determined by the action of the upper limbs as well as the coordinated action of the whole body, particularly the lower limbs and the trunk.

Three-dimensional kinematics and limb kinetic energy of running cockroaches.

1997 ◽  
Vol 200 (13) ◽  
pp. 1919-1929 ◽  
Author(s):  
R Kram ◽  
B Wong ◽  
R J Full
Keyword(s):  
Kinetic Energy ◽  
High Speed ◽  
Mechanical Energy ◽  
Center Of Mass ◽  
Three Dimensional ◽  
The Body ◽  
Morphological Data ◽  
Fast Running ◽  
Total Mechanical Energy ◽  
Reaction Forces

We tested the hypothesis that fast-running hexapeds must generate high levels of kinetic energy to cycle their limbs rapidly compared with bipeds and quadrupeds. We used high-speed video analysis to determine the three-dimensional movements of the limbs and bodies of cockroaches (Blaberus discoidalis) running on a motorized treadmill at 21 cm s-1 using an alternating tripod gait. We combined these kinematic data with morphological data to calculate the mechanical energy produced to move the limbs relative to the overall center of mass and the mechanical energy generated to rotate the body (head + thorax + abdomen) about the overall center of mass. The kinetic energy involved in moving the limbs was 8 microJ stride-1 (a power output of 21 mW kg-1, which was only approximately 13% of the external mechanical energy generated to lift and accelerate the overall center of mass at this speed. Pitch, yaw and roll rotational movements of the body were modest (less than +/- 7 degrees), and the mechanical energy required for these rotations was surprisingly small (1.7 microJ stride-1 for pitch, 0.5 microJ stride-1 for yaw and 0.4 microJ stride-1 for roll) as was the power (4.2, 1.2 and 1.1 mW kg-1, respectively). Compared at the same absolute forward speed, the mass-specific kinetic energy generated by the trotting hexaped to swing its limbs was approximately half of that predicted from data on much larger two- and four-legged animals. Compared at an equivalent speed (mid-trotting speed), limb kinetic energy was a smaller fraction of total mechanical energy for cockroaches than for large bipedal runners and hoppers and for quadrupedal trotters. Cockroaches operate at relatively high stride frequencies, but distribute ground reaction forces over a greater number of relatively small legs. The relatively small leg mass and inertia of hexapeds may allow relatively high leg cycling frequencies without exceptionally high internal mechanical energy generation.

The Motion of Euglena Viridis: The Role of Flagella

1966 ◽  
Vol 44 (3) ◽  
pp. 579-588 ◽  
Author(s):  
M. E. J. HOLWILL
Keyword(s):  
Theoretical Analysis ◽  
High Speed ◽  
Body Movement ◽  
Three Dimensional ◽  
The Body ◽  
Propulsive Force

1. Analysis of high-speed cine-films of Euglena viridis reveal that the organism traverses a complex three-dimensional path while helical waves are propagated from base to tip along the flagellum. 2. Theoretical analysis shows that the rapid forward velocity of the organism cannot be produced by the body movement alone. The propulsive force generated by the flagellum is sufficient to maintain the observed velocities. 3. Although the euglenoid flagellum bears mastigonemes the thrust produced by it is in the direction to be expected if the flagellum were smooth. Possible explanations of this observation are given.

Sign in / Sign up

Export Citation Format

Share Document