scholarly journals Mechano-transduction via the pectin-FERONIA complex regulates ROP6 GTPase signaling in Arabidopsis

2021 ◽  
Author(s):  
Zhenbiao Yang ◽  
Wenxin Tang ◽  
Wenwei Lin ◽  
Binqi Li
Keyword(s):  
Cell Wall ◽  
Signaling Pathway ◽  
Turgor Pressure ◽  
Mechanical Forces ◽  
Pavement Cells ◽  
Mechanical Signaling ◽  
Recessive Mutations ◽  
Cell Ablation ◽  
Maximal Tensile Stress ◽  
Local Cell

During growth and morphogenesis, plant cells respond to mechanical stresses resulting from spatiotemporal changes in the cell wall that bear high internal turgor pressure. Microtubule (MT) arrays are re-organized to align in the direction of maximal tensile stress to guide the synthesis of cellulose, reinforcing the local cell wall. However, how mechanical forces regulate MT re-organization remains largely unknown. Here, we demonstrate that mechanical signaling that is based on the CrRLK1L subfamily receptor kinase FERONIA (FER) regulates the reorganization of cortical MT in cotyledon epidermal pavement cells (PC) in Arabidopsis. Recessive mutations in FER compromised MT response to mechanical perturbations such as single cell ablation, compression and Isoxaben treatment in these pavement cells. These perturbations promoted the activation of ROP6 GTPase that acts directly downstream of FER. Furthermore, defects in the ROP6 signaling pathway negated the reorganization of cortical MTs induced by these stresses. Finally, reduction in highly demethylesterified pectin, which binds the extracellular malectin domain of FER and is required for FER-mediated ROP6 activation, also impacted mechanical induction of cortical MT reorganization. Taken together our results suggest that the FER-pectin complex senses and/or transduce mechanical forces to regulate MT organization through activating the ROP6 signaling pathway in Arabidopsis.

scholarly journals Subcellular and supracellular mechanical stress prescribes cytoskeleton behavior in Arabidopsis cotyledon pavement cells

eLife ◽  
2014 ◽  
Vol 3 ◽  
Author(s):  
Arun Sampathkumar ◽  
Pawel Krupinski ◽  
Raymond Wightman ◽  
Pascale Milani ◽  
Alexandre Berquand ◽  
...  
Keyword(s):  
Cell Wall ◽  
Mechanical Stress ◽  
Cell Shape ◽  
Tissue Level ◽  
Pavement Cells ◽  
Force Microscopy ◽  
Atomic Force ◽  
Response To Stress ◽  
Maximal Tensile Stress ◽  
Open Question

Although it is a central question in biology, how cell shape controls intracellular dynamics largely remains an open question. Here, we show that the shape of Arabidopsis pavement cells creates a stress pattern that controls microtubule orientation, which then guides cell wall reinforcement. Live-imaging, combined with modeling of cell mechanics, shows that microtubules align along the maximal tensile stress direction within the cells, and atomic force microscopy demonstrates that this leads to reinforcement of the cell wall parallel to the microtubules. This feedback loop is regulated: cell-shape derived stresses could be overridden by imposed tissue level stresses, showing how competition between subcellular and supracellular cues control microtubule behavior. Furthermore, at the microtubule level, we identified an amplification mechanism in which mechanical stress promotes the microtubule response to stress by increasing severing activity. These multiscale feedbacks likely contribute to the robustness of microtubule behavior in plant epidermis.

scholarly journals Protocol for mapping the spatial variability in cell wall mechanical bending behavior in living leaf pavement cells

2021 ◽  
Author(s):  
Wenlong Li ◽  
Sedighe Keynia ◽  
Samuel A. Belteton ◽  
Faezeh Afshar-Hatam ◽  
Daniel B. Szymanski ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Cell Wall ◽  
Elastic Modulus ◽  
Cell Walls ◽  
Turgor Pressure ◽  
Plant Cell Walls ◽  
Pavement Cells ◽  
Elastic Bending ◽  
Entire Thickness ◽  
Bending Behavior

AbstractAn integrated, experimental-computational approach is presented to analyze the variation of elastic bending behavior in the primary cell wall of living Arabidopsis thaliana pavement cells and to measure turgor pressure in the cells quantitatively under different osmotic conditions. Mechanical properties, size and geometry of cells and internal turgor pressure greatly influence their morphogenesis. Computational models of plant morphogenesis require values for wall elastic modulus and turgor pressure but very few experiments were designed to validate the results using measurements that deform the entire thickness of the cell wall. Because new wall material is deposited from inside the cell, full-thickness deformations are needed to quantify relevant changes associated with cell development. The approach here uses laser scanning confocal microscopy to measure the three-dimensional geometry of a single pavement cell, and indentation experiments equipped with high magnification objective lens to probe the local mechanical responses across the same cell wall. These experimental results are matched iteratively using a finite element model of the experiment to determine the local mechanical properties, turgor pressure, and cell height. The resulting modulus distribution along the periclinal wall is shown to be nonuniform. These results are consistent with the characteristics of plant cell walls which have a heterogeneous organization. This research and the resulting model will provide a reference for future work associated with the heterogeneity and anisotropy of mechanical properties of plant cell walls in order to understand morphogenesis of the primary cell walls during growth and to predict quantitatively the magnitudes/directions of cell wall forces.One sentence summaryThe distribution of elastic modulus of the periclinal cell walls of livingArabidopsis epidermis is nonuniform as measured by bending the entire thickness of the wall.HighlightsExperimental characterization of the spatial distribution of elastic bending behavior across the periclinal wallQuantification of the turgor pressure of the living plant epidermal cells validated with osmotic treatmentsQuantification of the effect of cell geometry on the measured mechanical responseGraphical abstract

scholarly journals Cell Wall-Related Bionumbers and Bioestimates of Saccharomyces cerevisiae and Candida albicans

2013 ◽  
Vol 13 (1) ◽  
pp. 2-9 ◽  
Author(s):  
Frans M. Klis ◽  
Chris G. de Koster ◽  
Stanley Brul
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Wall ◽  
Candida Albicans ◽  
Cell Size ◽  
Pathogenic Fungus ◽  
Turgor Pressure ◽  
Hyphal Growth ◽  
Biological Research ◽  
Content Type ◽  
Starting Point

ABSTRACTBionumbers and bioestimates are valuable tools in biological research. Here we focus on cell wall-related bionumbers and bioestimates of the budding yeastSaccharomyces cerevisiaeand the polymorphic, pathogenic fungusCandida albicans. We discuss the linear relationship between cell size and cell ploidy, the correlation between cell size and specific growth rate, the effect of turgor pressure on cell size, and the reason why using fixed cells for measuring cellular dimensions can result in serious underestimation ofin vivovalues. We further consider the evidence that individual buds and hyphae grow linearly and that exponential growth of the population results from regular formation of new daughter cells and regular hyphal branching. Our calculations show that hyphal growth allowsC. albicansto cover much larger distances per unit of time than the yeast mode of growth and that this is accompanied by strongly increased surface expansion rates. We therefore predict that the transcript levels of genes involved in wall formation increase during hyphal growth. Interestingly, wall proteins and polysaccharides seem barely, if at all, subject to turnover and replacement. A general lesson is how strongly most bionumbers and bioestimates depend on environmental conditions and genetic background, thus reemphasizing the importance of well-defined and carefully chosen culture conditions and experimental approaches. Finally, we propose that the numbers and estimates described here offer a solid starting point for similar studies of other cell compartments and other yeast species.

scholarly journals Cell wall biosynthesis and the molecular mechanism of plant enlargement

2009 ◽  
Vol 36 (5) ◽  
pp. 383 ◽  
Author(s):  
John S. Boyer
Keyword(s):  
Cell Wall ◽  
Critical Level ◽  
Turgor Pressure ◽  
Chara Corallina ◽  
Wall Material ◽  
Primary Wall ◽  
Terrestrial Plants ◽  
Green Plants ◽  
Wall Deposition ◽  
Wall Growth

Recently discovered reactions allow the green alga Chara corallina (Klien ex. Willd., em. R.D.W.) to grow well without the benefit of xyloglucan or rhamnogalactan II in its cell wall. Growth rates are controlled by polygalacturonic acid (pectate) bound with calcium in the primary wall, and the reactions remove calcium from these bonds when new pectate is supplied. The removal appears to occur preferentially in bonds distorted by wall tension produced by the turgor pressure (P). The loss of calcium accelerates irreversible wall extension if P is above a critical level. The new pectate (now calcium pectate) then binds to the wall and decelerates wall extension, depositing new wall material on and within the old wall. Together, these reactions create a non-enzymatic but stoichiometric link between wall growth and wall deposition. In green plants, pectate is one of the most conserved components of the primary wall, and it is therefore proposed that the acceleration-deceleration-wall deposition reactions are of wide occurrence likely to underlie growth in virtually all green plants. C. corallina is one of the closest relatives of the progenitors of terrestrial plants, and this review focuses on the pectate reactions and how they may fit existing theories of plant growth.

scholarly journals A family of cell wall transglutaminases is essential for appressorium development and pathogenicity in Phytophthora infestans

2021 ◽  
Author(s):  
Maja Brus-Szkalej ◽  
Christian B. Andersen ◽  
Ramesh R. Vetukuri ◽  
Laura J. Grenville-Briggs Didymus
Keyword(s):  
Cell Wall ◽  
Phytophthora Infestans ◽  
Sequence Similarity ◽  
Turgor Pressure ◽  
Intermediate Phenotype ◽  
Entire Family ◽  
Drug Concentrations ◽  
Lower Drug ◽  
Chemical Inhibition ◽  
Eukaryotic Organisms

Transglutaminases (TGases) are enzymes highly conserved among prokaryotic and eukaryotic organisms, where their role is to catalyse protein cross-linking. One of the putative TGases of Phytophthora infestans has previously been shown to be localised to the cell wall. Based on sequence similarity we were able to identify six more genes annotated as putative TGases and show that these seven genes group together in phylogenetic analysis. All of the seven proteins are predicted to contain transmembrane helices and both a TGase domain and a MANSC domain, the latter of which was previously shown to play a role in protein stability. Chemical inhibition of transglutaminase activity and silencing of the entire family of the putative cell wall TGases are both lethal to P. infestans indicating the importance of these proteins in cell wall formation and stability. The intermediate phenotype obtained with lower drug concentrations and less efficient silencing displays a number of deformations to germ tubes and appressoria. Both chemically treated and silenced lines show lower pathogenicity than the wild type in leaf infection assays. Finally, we show that appressoria of P. infestans possess the ability to build up turgor pressure and that this ability is decreased by chemical inhibition of TGases.

scholarly journals Interplay between turgor pressure and plasmodesmata during plant development

2019 ◽  
Author(s):  
Valeria Hernández-Hernández ◽  
Mariana Benítez ◽  
Arezki Boudaoud
Keyword(s):  
Plant Development ◽  
Cell Walls ◽  
Lateral Roots ◽  
Turgor Pressure ◽  
Mechanical Forces ◽  
Root Initiation ◽  
Vascular Differentiation ◽  
Physiological Processes ◽  
Intercellular Movement ◽  
Transition To Flowering

Abstract Plasmodesmata traverse cell walls, generating connections between neighboring cells. They allow intercellular movement of molecules such as transcription factors, hormones, and sugars, and thus create a symplasmic continuity within a tissue. One important factor that determines plasmodesmal permeability is their aperture, which is regulated during developmental and physiological processes. Regulation of aperture has been shown to affect developmental events such as vascular differentiation in the root, initiation of lateral roots, or transition to flowering. Extensive research has unraveled molecular factors involved in the regulation of plasmodesmal permeability. Nevertheless, many plant developmental processes appear to involve feedbacks mediated by mechanical forces, raising the question of whether mechanical forces and plasmodesmal permeability affect each other. Here, we review experimental data on how one of these forces, turgor pressure, and plasmodesmal permeability may mutually influence each other during plant development, and we discuss the questions raised by these data. Addressing such questions will improve our knowledge of how cellular patterns emerge during development, shedding light on the evolution of complex multicellular plants.

scholarly journals Touch-induced seedling morphological changes are determined by ethylene-regulated pectin degradation

2020 ◽  
Vol 6 (48) ◽  
pp. eabc9294
Author(s):  
Qingqing Wu ◽  
Yue Li ◽  
Mohan Lyu ◽  
Yiwen Luo ◽  
Hui Shi ◽  
...  
Keyword(s):  
Cell Wall ◽  
Morphological Changes ◽  
Mechanical Forces ◽  
Ethylene Signaling ◽  
Pectin Degradation ◽  
Force Microscopy ◽  
Mechanical Responses ◽  
Atomic Force ◽  
Wall Stiffness ◽  
Molecular Framework

How mechanical forces regulate plant growth is a fascinating and long-standing question. After germination underground, buried seedlings have to dynamically adjust their growth to respond to mechanical stimulation from soil barriers. Here, we designed a lid touch assay and used atomic force microscopy to investigate the mechanical responses of seedlings during soil emergence. Touching seedlings induced increases in cell wall stiffness and decreases in cell elongation, which were correlated with pectin degradation. We revealed that PGX3, which encodes a polygalacturonase, mediates touch-imposed alterations in the pectin matrix and the mechanics of morphogenesis. Furthermore, we found that ethylene signaling is activated by touch, and the transcription factor EIN3 directly associates with PGX3 promoter and is required for touch-repressed PGX3 expression. By uncovering the link between mechanical forces and cell wall remodeling established via the EIN3-PGX3 module, this work represents a key step in understanding the molecular framework of touch-induced morphological changes.

scholarly journals Catalysts of plant cell wall loosening

F1000Research ◽  
2016 ◽  
Vol 5 ◽  
pp. 119 ◽  
Author(s):  
Daniel J. Cosgrove
Keyword(s):  
Cell Wall ◽  
Plant Cell Wall ◽  
Turgor Pressure ◽  
Wall Stress ◽  
Primary Cell Wall ◽  
Wall Structure ◽  
Xyloglucan Endotransglycosylase ◽  
Growing Cell ◽  
Tensile Forces ◽  
Wall Loosening

The growing cell wall in plants has conflicting requirements to be strong enough to withstand the high tensile forces generated by cell turgor pressure while selectively yielding to those forces to induce wall stress relaxation, leading to water uptake and polymer movements underlying cell wall expansion. In this article, I review emerging concepts of plant primary cell wall structure, the nature of wall extensibility and the action of expansins, family-9 and -12 endoglucanases, family-16 xyloglucan endotransglycosylase/hydrolase (XTH), and pectin methylesterases, and offer a critical assessment of their wall-loosening activity

Sign in / Sign up

Export Citation Format

Share Document