scholarly journals Third Generation Cytogenetic Analysis (TGCA): diagnostic application of long-read sequencing.

2021 ◽  
Author(s):  
Pamela Magini ◽  
Alessandra Mingrino ◽  
Barbara Gega ◽  
Gianluca Mattei ◽  
Rorberto Semeraro ◽  
...  
Keyword(s):  
Diagnostic Tests ◽  
Time Frame ◽  
Molecular Karyotyping ◽  
Chromosomal Anomalies ◽  
Online Mode ◽  
Genomic Imbalances ◽  
Oxford Nanopore ◽  
Dna Libraries ◽  
Long Read ◽  
Pathogenic Cnvs

Unbalanced Structural Variants (uSVs) play important roles in the pathogenesis of several genetic syn- dromes. Traditional and molecular karyotyping are considered the first-tier diagnostic tests to detect macroscopic and cryptic deletions/duplications. However, their time-consuming and laborious experi- mental protocols protract diagnostic times from three to fifteen days. Long read sequencing approaches, such as Oxford Nanopore Technologies (ONT), have the ability to reduce time to results for the detection of uSVs with the same resolution of current state-of-the-art diagnostic tests. Here we compared ONT to molecular karyotyping for the detection of pathogenic uSVs of 7 patients with previously diagnosed causative CNVs of different sizes and allelic fractions. Larger chromosomal anomalies included trisomy 21 and mosaic tetrasomy 12p. Among smaller CNVs we tested two recip- rocal genomic imbalances in 7q11.23 (1.367 Mb), a 170 kb deletion encompassing NRXN1 and mosaic 6q27 (1.231 Mb) and 2q23.1 (408 kb) deletions. DNA libraries were prepared following ONT standard protocols and sequenced on the GridION device for 48 h. Data generated during runs were analysed in online mode, using NanoGLADIATOR. We were capable to identify all pathogenic CNVs with detection time inversely proportional to size and allelic fraction. Aneuploidies were called after only 30 minutes of sequencing, while 30 hours were needed to call CNVs < 500 kb also in mosaic state (44%). These results demonstrate the clinical utility of our approach that allows the molecular diagnosis of genomic disorders within a 30 minutes to 30 hours time-frame.

scholarly journals Chromosome-level genome assembly and structural variant analysis of two laboratory yeast strains from the Peterhof Genetic Collection lineage

2021 ◽  
Vol 11 (4) ◽  
Author(s):  
Yury A Barbitoff ◽  
Andrew G Matveenko ◽  
Anton B Matiiv ◽  
Evgeniia M Maksiutenko ◽  
Svetlana E Moskalenko ◽  
...  
Keyword(s):  
Chromosomal Rearrangements ◽  
Structural Features ◽  
Multiple Observations ◽  
Yeast Strains ◽  
Trace Back ◽  
Oxford Nanopore ◽  
Long Read ◽  
History Of ◽  
Variant Analysis ◽  
Yeast Genomes

Abstract Thousands of yeast genomes have been sequenced with both traditional and long-read technologies, and multiple observations about modes of genome evolution for both wild and laboratory strains have been drawn from these sequences. In our study, we applied Oxford Nanopore and Illumina technologies to assemble complete genomes of two widely used members of a distinct laboratory yeast lineage, the Peterhof Genetic Collection (PGC), and investigate the structural features of these genomes including transposable element content, copy number alterations, and structural rearrangements. We identified numerous notable structural differences between genomes of PGC strains and the reference S288C strain. We discovered a substantial enrichment of mid-length insertions and deletions within repetitive coding sequences, such as in the SCH9 gene or the NUP100 gene, with possible impact of these variants on protein amyloidogenicity. High contiguity of the final assemblies allowed us to trace back the history of reciprocal unbalanced translocations between chromosomes I, VIII, IX, XI, and XVI of the PGC strains. We show that formation of hybrid alleles of the FLO genes during such chromosomal rearrangements is likely responsible for the lack of invasive growth of yeast strains. Taken together, our results highlight important features of laboratory yeast strain evolution using the power of long-read sequencing.

scholarly journals Hapo-G, haplotype-aware polishing of genome assemblies with accurate reads

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Jean-Marc Aury ◽  
Benjamin Istace
Keyword(s):  
Single Molecule ◽  
Direct Consequence ◽  
High Quality ◽  
Sequencing Errors ◽  
Coding Regions ◽  
Sequencing Technologies ◽  
Long Reads ◽  
Oxford Nanopore ◽  
Long Read ◽  
Genome Assemblies

Abstract Single-molecule sequencing technologies have recently been commercialized by Pacific Biosciences and Oxford Nanopore with the promise of sequencing long DNA fragments (kilobases to megabases order) and then, using efficient algorithms, provide high quality assemblies in terms of contiguity and completeness of repetitive regions. However, the error rate of long-read technologies is higher than that of short-read technologies. This has a direct consequence on the base quality of genome assemblies, particularly in coding regions where sequencing errors can disrupt the coding frame of genes. In the case of diploid genomes, the consensus of a given gene can be a mixture between the two haplotypes and can lead to premature stop codons. Several methods have been developed to polish genome assemblies using short reads and generally, they inspect the nucleotide one by one, and provide a correction for each nucleotide of the input assembly. As a result, these algorithms are not able to properly process diploid genomes and they typically switch from one haplotype to another. Herein we proposed Hapo-G (Haplotype-Aware Polishing Of Genomes), a new algorithm capable of incorporating phasing information from high-quality reads (short or long-reads) to polish genome assemblies and in particular assemblies of diploid and heterozygous genomes.

Dual Isoform Sequencing Reveals a Multifaceted Transcriptional Architecture of a Prototype Baculovirus

2021 ◽  
Author(s):  
Gábor Torma ◽  
Dóra Tombácz ◽  
Norbert Moldován ◽  
Ádám Fülöp ◽  
István Prazsák ◽  
...  
Keyword(s):  
Protein Coding ◽  
Rna Molecules ◽  
Non Coding Rna ◽  
Oxford Nanopore ◽  
The Pacific ◽  
Viral Genes ◽  
Long Read ◽  
Oxford Nanopore Technologies ◽  
Overlapping Transcripts

Abstract In this study, we used two long-read sequencing (LRS) techniques, Sequel from the Pacific Biosciences and MinION from Oxford Nanopore Technologies, for the transcriptional characterization of a prototype baculovirus, Autographacalifornica multiple nucleopolyhedrovirus. LRS is able to read full-length RNA molecules, and thereby to distinguish between transcript isoforms, mono- and polycistronic RNAs, and overlapping transcripts. Altogether, we detected 875 transcripts, of which 759 are novel and 116 have been annotated previously. These RNA molecules include 41 novel putative protein coding transcript (each containing 5’-truncated in-frame ORFs), 14 monocistronic transcripts, 99 multicistronic RNAs, 101 non-coding RNA, and 504 length isoforms. We also detected RNA methylation in 12 viral genes and RNA hyper-editing in the longer 5’-UTR transcript isoform of ORF 19 gene.

scholarly journals High resolution species detection: accurate long read eDNA metabarcoding of North Sea fish using Oxford Nanopore sequencing

2021 ◽  
Author(s):  
Karlijn Doorenspleet ◽  
Lara Jansen ◽  
Saskia Oosterbroek ◽  
Oscar Bos ◽  
Pauline Kamermans ◽  
...  
Keyword(s):  
High Resolution ◽  
North Sea ◽  
Fish Species ◽  
16S Rrna Genes ◽  
Rrna Genes ◽  
Nanopore Sequencing ◽  
Nature Restoration ◽  
Oxford Nanopore ◽  
Field Samples ◽  
Long Read

To monitor the effect of nature restoration projects in North Sea ecosystems, accurate and intensive biodiversity assessments are vital. DNA based techniques and especially environmental DNA (eDNA) metabarcoding from seawater is becoming a powerful monitoring tool. However, current approaches are based on genetic target regions of <500 nucleotides, which offer limited taxonomic resolution. This study aims to develop and validate a long read nanopore sequencing method for eDNA that enables improved identification of fish species. We designed a universal primer pair targeting a 2kb region covering the 12S and 16S rRNA genes of fish mitochondria. eDNA was amplified and sequenced using the Oxford Nanopore MiniON. Sequence data was processed using the new pipeline Decona, and accurate consensus identities of above 99.9% were retrieved. The primer set efficiency was tested with eDNA from a 3.000.000 L zoo aquarium with 31 species of bony fish and elasmobranchs. Over 55% of the species present were identified on species level and over 75% on genus level. Next, our long read eDNA metabarcoding approach was applied to North Sea eDNA field samples collected at ship wreck sites, the Gemini Offshore Wind Farm, the Borkum Reef Grounds and a bare sand bottom. Here, location specific fish and vertebrate communities were obtained. Incomplete reference databases still form a major bottleneck in further developing high resolution long read metabarcoding. Yet, the method has great potential for rapid and accurate fish species monitoring in marine field studies.

scholarly journals Microbial diversity characterization of seawater in a pilot study using Oxford Nanopore Technologies long-read sequencing

2020 ◽  
Author(s):  
Michael Liem ◽  
Tonny Regensburg-Tuïnk ◽  
Christiaan Henkel ◽  
Hans Jansen ◽  
Herman Spaink
Keyword(s):  
Microbial Diversity ◽  
Environmental Samples ◽  
Sea Water ◽  
Flow Cells ◽  
Oxford Nanopore ◽  
Challenging Tasks ◽  
Long Read ◽  
Close Relatives ◽  
Oxford Nanopore Technologies

Abstract Objective: Currently the majority of non-culturable microbes in sea water are yet to be discovered, Nanopore offers a solution to overcome the challenging tasks to identify the genomes and complex composition of oceanic microbiomes. In this study we evaluate the utility of Oxford Nanopore Technologies (ONT) sequencing to characterize microbial diversity in seawater from multiple locations. We compared the microbial species diversity of retrieved environmental samples from two different locations and time points.Results: With only three ONT flow cells we were able to identify thousands of organisms, including bacteriophages, from which a large part at species level. It was possible to assemble genomes from environmental samples with Flye. In several cases this resulted in >1 Mbp contigs and in the particular case of a Thioglobus singularis species it even produced a near complete genome. k-mer analysis reveals that a large part of the data represents species of which close relatives have not yet been deposited to the database. These results show that our approach is suitable for scalable genomic investigations such as monitoring oceanic biodiversity and provides a new platform for education in biodiversity.

scholarly journals Chromosome-scale assembly of the Sparassis latifolia genome obtained using long-read and Hi-C sequencing

2021 ◽  
Author(s):  
Chi yang ◽  
Lu Ma ◽  
Donglai Xiao ◽  
Xiaoyu Liu ◽  
Xiaoling Jiang ◽  
...  
Keyword(s):  
Repetitive Sequences ◽  
Draft Genome ◽  
Edible Mushroom ◽  
Illumina Hiseq ◽  
Protein Coding ◽  
Long Reads ◽  
Oxford Nanopore ◽  
Genome Features ◽  
Long Read ◽  
Genomic Studies

Sparassis latifolia is a valuable edible mushroom cultivated in China. In 2018, our research group reported an incomplete and low quality genome of S. latifolia was obtained by Illumina HiSeq 2500 sequencing. These limitations in the available genome have constrained genetic and genomic studies in this mushroom resource. Herein, an updated draft genome sequence of S. latifolia was generated by Oxford Nanopore sequencing and the Hi-C technique. A total of 8.24 Gb of Oxford Nanopore long reads representing ~198.08X coverage of the S. latifolia genome were generated. Subsequently, a high-quality genome of 41.41 Mb, with scaffold and contig N50 sizes of 3.31 Mb and 1.51 Mb, respectively, was assembled. Hi-C scaffolding of the genome resulted in 12 pseudochromosomes containing 93.56% of the bases in the assembled genome. Genome annotation further revealed that 17.47% of the genome was composed of repetitive sequences. In addition, 13,103 protein-coding genes were predicted, among which 98.72% were functionally annotated. BUSCO assay results further revealed that there were 92.07% complete BUSCOs. The improved chromosome-scale assembly and genome features described here will aid further molecular elucidation of various traits, breeding of S. latifolia, and evolutionary studies with related taxa.

scholarly journals TagSeqTools: a flexible and comprehensive analysis pipeline for NAD tagSeq data

2020 ◽  
Author(s):  
Huan Zhong ◽  
Zongwei Cai ◽  
Zhu Yang ◽  
Yiji Xia
Keyword(s):  
Rna Sequencing ◽  
Comprehensive Analysis ◽  
Enzymatic Reactions ◽  
Computational Tool ◽  
Sequencing Data ◽  
Analysis Pipeline ◽  
Oxford Nanopore ◽  
Long Read ◽  
Identification And Characterization

AbstractNAD tagSeq has recently been developed for the identification and characterization of NAD+-capped RNAs (NAD-RNAs). This method adopts a strategy of chemo-enzymatic reactions to label the NAD-RNAs with a synthetic RNA tag before subjecting to the Oxford Nanopore direct RNA sequencing. A computational tool designed for analyzing the sequencing data of tagged RNA will facilitate the broader application of this method. Hence, we introduce TagSeqTools as a flexible, general pipeline for the identification and quantification of tagged RNAs (i.e., NAD+-capped RNAs) using long-read transcriptome sequencing data generated by NAD tagSeq method. TagSeqTools comprises two major modules, TagSeek for differentiating tagged and untagged reads, and TagSeqQuant for the quantitative and further characterization analysis of genes and isoforms. Besides, the pipeline also integrates some advanced functions to identify antisense or splicing, and supports the data reformation for visualization. Therefore, TagSeqTools provides a convenient and comprehensive workflow for researchers to analyze the data produced by the NAD tagSeq method or other tagging-based experiments using Oxford nanopore direct RNA sequencing. The pipeline is available at https://github.com/dorothyzh/TagSeqTools, under Apache License 2.0.

scholarly journals Genome Resources for the Ex-type of Phytophthora citricola, and well-authenticated isolates of P. hibernalis, P. nicotianae and P. syringae

2021 ◽  
Author(s):  
Subodh K. Srivastava ◽  
Leandra M. Knight ◽  
Mark K. Nakhla ◽  
Z. Gloria Abad
Keyword(s):  
Plant Pathogens ◽  
High Throughput Sequencing ◽  
Economic Losses ◽  
Biological Research ◽  
Type Specimens ◽  
High Coverage ◽  
Oxford Nanopore ◽  
Long Read ◽  
Basic And Applied Research ◽  
Diagnostic Applications

Phytophthora is one of the most important genera of plant pathogens with many members causing high economic losses world-wide. To build robust molecular identification systems, it is very important to have information from well-authenticated specimens and in preference the ex-type specimens. The reference genomes of well-authenticated specimens form a critical foundation for genetics, biological research, and diagnostic applications. In this study, we describe four draft Phytophthora genomes resources for the Ex-type of P. citricola BL34 (P0716 WPC) (118 contigs for 50 Mb), and well-authenticated specimens of P. syringae BL57G (P10330 WPC) (591 contigs for 75 Mb), P. hibernalis BL41G (P3822 WPC) (404 contigs for 84 Mb), and P. nicotianae BL162 (P6303 WPC) (3984 contigs for 108 Mb) generated with MinION long-read High-Throughput Sequencing (HTS) technology (Oxford Nanopore Technologies, ONT). Using the quality reads we assembled high coverage genomes of P. citricola with 291X coverage and 16,662 annotated genes; P. nicotianae with 205X coverage and 29,271 annotated genes; P. syringae with 76X coverage and 23,331 annotated genes, and P. hibernalis with 42X coverage and 21,762 annotated genes. With the availability of genomes sequences and its annotations, we predict that these draft genomes will be accommodating for various basic and applied research including diagnostics to protect global agriculture.

scholarly journals Oxford Nanopore Sequencing, Hybrid Error Correction, and de novo Assembly of a Eukaryotic Genome

2015 ◽  
Author(s):  
Sara Goodwin ◽  
James Gurtowski ◽  
Scott Ethe-Sayers ◽  
Panchajanya Deshpande ◽  
Michael Schatz ◽  
...  
Keyword(s):  
Error Correction ◽  
De Novo Assembly ◽  
De Novo ◽  
Correction Algorithm ◽  
Membrane Pore ◽  
Complete Representation ◽  
Oxford Nanopore ◽  
Long Read ◽  
Error Correction Algorithm ◽  
Sequencing Instrument

Monitoring the progress of DNA molecules through a membrane pore has been postulated as a method for sequencing DNA for several decades. Recently, a nanopore-based sequencing instrument, the Oxford Nanopore MinION, has become available that we used for sequencing the S. cerevisiae genome. To make use of these data, we developed a novel open-source hybrid error correction algorithm Nanocorr (https://github.com/jgurtowski/nanocorr) specifically for Oxford Nanopore reads, as existing packages were incapable of assembling the long read lengths (5-50kbp) at such high error rate (between ~5 and 40% error). With this new method we were able to perform a hybrid error correction of the nanopore reads using complementary MiSeq data and produce a de novo assembly that is highly contiguous and accurate: the contig N50 length is more than ten-times greater than an Illumina-only assembly (678kb versus 59.9kbp), and has greater than 99.88% consensus identity when compared to the reference. Furthermore, the assembly with the long nanopore reads presents a much more complete representation of the features of the genome and correctly assembles gene cassettes, rRNAs, transposable elements, and other genomic features that were almost entirely absent in the Illumina-only assembly.

Sign in / Sign up

Export Citation Format

Share Document