scholarly journals A two-staged bacterial process coupling methanotrophic and heterotrophic bacteria for 1-alkene production from methane

2021 ◽  
Author(s):  
Ramita Khanongnuch ◽  
Rahul Mangayil ◽  
Ville Santala ◽  
Anne Grethe Hestnes ◽  
Mette Marianne Svenning ◽  
...  

Methane (CH4) is a sustainable carbon feedstock source for aerobic CH4-oxidizing bacteria (methanotrophs) to produce value-added chemicals. Under O2-limiting conditions, CH4 oxidation results in the production of various short-chain organic acids and platform chemicals. However, these CH4-derived products are still limited to C2-C6 and could be extended by utilizing them as a feedstock for heterotrophic bacteria. A two-stage system for CH4 abatement and 1-alkene production was developed in this study. Gamma- and alphaproteobacterial methanotrophs, i.e. Methylobacter tundripaludum SV96 and Methylocystis rosea SV97, respectively, were investigated in batch tests under different gas supplementation schemes. Under O2 limiting conditions (O2/CH4 molar ratio ~0.3), M. tundripaludum SV96 could potentially produce formate, acetate, succinate, and malate, accounted for ~7.4% of mol-CH4 consumed. For the first time, the organic acids-rich spent media derived from O2 limited-methanotrophic cultivation were successfully used for 1-alkene production using engineered Acinetobacter baylyi ADP1 (′tesA-undA) cells.

2020 ◽  
Vol 82 (6) ◽  
pp. 54-63
Author(s):  
M.Ya. Vortman ◽  
◽  
Yu.B. Pysmenna ◽  
A.I. Chuenko ◽  
D.R. Abdulina ◽  
...  

Biocides are widely used in medicine and various industries to protect against a number of harmful microorganisms. Organic quaternary ammonium and guanidine-containing compounds, the biological action of which is based on membrane-toxic properties, are used as bactericidal preparations. The aim of this work was to study the bactericidal and fungicidal activities of the synthesized oligomeric alkylsubstituted guanidinium bromides with different radicals -C3H7, -C7H15, -C10H21, against different isolates of heterotrophic bacteria and microscopic fungi. Methods. The synthesis of alkyl-substituted guanidiniumcontaining oligomers was performed in two stages. In the first stage, alkyl-substituted guanidine was obtained by the reaction of guanidine, previously converted by alkali from the salt form to the base form by the base and alkyl bromides (Alk=-C3H7 (propyl), -C7H15 (heptyl), -C10H21 (decyl)) in methanol at a temperature of 50°C and a molar ratio of 1:1. The second carried out the reaction between aromatic oligoepoxide DER-331 and alkyl-substituted guanidine in methanol at a temperature of 50°C for 2–3 hours and a molar ratio of 1:2. Bacteria were grown on meat-peptone agar for 48 hours at a temperature of 28±2°С. Test cultures of micromycetes were cultured on agar beer wort (6°B), incubated for 14 days in a thermostat at a temperature of 28±2°C. Antimicrobial activity of newly synthesized alkyl-substituted guanidinium-containing oligomers was determined by standard disco-diffusion method (method of disks on agar) and fungicidal activity was determined by the method of holes in agar. Results. Oligomeric alkylsubstituted guanidinium bromides with different radicals composed -C3H7, -C7H15, -C10H21- synthesized by the reaction of guanidine alkyl bromides with aromatic oligoepoxydes. It was found that alkyl-substituted guanidinium-containing oligomers at a concentration of 1–3% inhibited the growth of Escherichia coli 475, Pseudomonas aeruginosa 465, Klebsiella pneumonia 479, Pseudomonas pseudoalcaligenes 109, Staphylococcus aureus 451, E. faecalis 422, Rhodococcus erythropolis 102, Bacillus subtilis 138 and most of the studied micromycetes – Aureobasidium pullulans F-41430, Paecilomyces variotii F-41432, Penicillium funiculosum F-41435, Penicillium ochrochloron F-41431, Scopulariopsis brevicaulis F-41434, Trichoderma viride F-41437, Candida albicans F-41441, Aspergillus flavus F-41442, Aspergillus niger F-41448, Penicillium sp. F-41447. Conclusions. Antimicrobial and fungicidal properties significantly depend on the length of the alkyl radical, with increasing of its length the diameter of the zone of bacterial and micromycetes growth retardation increases.10.15407/microbiolj82.06.054


Author(s):  
Abhinav Kumar ◽  
Rajaram Bal ◽  
Rajendra Srivastava

Furfural (FAL) and 5-hydroxymethylfurfural (HMF) are important and sustainable platform chemicals. They are produced from lignocellulose biomass and attract significant attention as precursors for producing value-added chemicals and fuels. The...


Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1234
Author(s):  
Zhiwei Jiang ◽  
Di Hu ◽  
Zhiyue Zhao ◽  
Zixiao Yi ◽  
Zuo Chen ◽  
...  

Efficient conversion of renewable biomass into value-added chemicals and biofuels is regarded as an alternative route to reduce our high dependence on fossil resources and the associated environmental issues. In this context, biomass-based furfural and levulinic acid (LA) platform chemicals are frequently utilized to synthesize various valuable chemicals and biofuels. In this review, the reaction mechanism and catalytic system developed for the generation of furfural and levulinic acid are summarized and compared. Special efforts are focused on the different catalytic systems for the synthesis of furfural and levulinic acid. The corresponding challenges and outlooks are also observed.


RSC Advances ◽  
2021 ◽  
Vol 11 (36) ◽  
pp. 22365-22375
Author(s):  
Guangbing Liang ◽  
Yanhong Li ◽  
Chun Yang ◽  
Xun Hu ◽  
Qingyin Li ◽  
...  

In this work, industrial biomass power plant ash was used to synthesize the ZSM-5 zeolites for the first time with the original intention to turn value-added material into wealth, and then committed to adsorption performance testing.


2021 ◽  
Vol 405 ◽  
pp. 126705
Author(s):  
Javier Remón ◽  
Marina Casales ◽  
Jesús Gracia ◽  
María S. Callén ◽  
José Luis Pinilla ◽  
...  

2010 ◽  
Vol 658 ◽  
pp. 29-32 ◽  
Author(s):  
Kanit Soongprasit ◽  
Duangdao Aht-Ong ◽  
Viboon Sricharoenchaikul ◽  
Duangduen Atong

. La1-xCexCoO3 (x=0, 0.2, and 0.4) perovskite-type mixed oxides using polyvinyl alcohol (PVA) as complexing agent at two molar ratio of metal ion to PVA (1:1 and 1:2) were successfully prepared by sol-gel process. The precursor included lanthanum (II) nitrate hexahydrate, cerium (II) nitrate hexahydrate, and cobalt (II) nitrate hexahydrate where polyvinyl alcohol was added as complexing agent. The suitable condition of Cerium (Ce) substitution and PVA molar ratio were established for further application in hydrocarbon conversion to high value added products. TGA thermogram of as-prepared precursor showed that PVA absolutely decomposed at temperature higher than 500°C. XRD patterns of calcined catalyst showed both LaCoO3 rhombohedral and CeO2 cubic structures that confirmed the formation of mixed crystal structure. Nevertheless, Co3O4 slightly appeared with low peak intensity which came from the oxidation reaction of as-prepared catalyst during calcinations. XRD showed that PVA did not effect to crystal structure of synthesized catalyst. Higher PVA content added in the precursor cause the reduction of crystal growth of catalyst in calcinations step. In contrast, morphology of catalyst is directly related with PVA content such that the spongy and sheet-like structure were formed with increasing PVA content which prevented the agglomeration of particles. The results showed that PVA content play an important role in morphology of perovskite-type mixed oxide catalysts but did not affected to their crystal structures.


2019 ◽  
Vol 91 (3) ◽  
pp. 397-408
Author(s):  
Diana Aparaschivei ◽  
Anamaria Todea ◽  
August E. Frissen ◽  
Valentin Badea ◽  
Gerlinde Rusu ◽  
...  

Abstract 2,5-Furandicarboxylic acid and itaconic acid are both important biobased platform chemicals and their terpolymer with 1,6-hexanediol (HDO) can be the starting point for a new class of reactive polyesters, with important applications. The green synthetic route developed in this study involves a biocatalytic condensation polymerization reaction of dimethyl furan-2,5-dicarboxylate (DMFDC) and dimethyl itaconate (DMI) with HDO in toluene at 80°C, using commercial immobilized lipases from Candida antarctica B. In the best conditions, the formed polymer product was isolated with more than 80% yield, containing about 85% terpolymer with average molecular mass of about 1200 (Mn, calculated from MALDI-TOF MS data) and 15% DMFDC_HDO copolymer. Considering the higher reactivity of DMFDC, the composition of the synthesized polymer can be directed by adjusting the molar ratio of DMFDC and DMI, as well as by extending the reaction time. Structural analysis by NMR demonstrated the regioselective preference for the carbonyl group from DMI adjacent to the methylene group. The biocatalyst was successfully reused in multiple reaction cycles.


2021 ◽  
Vol 3 ◽  
Author(s):  
Huan Chen ◽  
Kun Wan ◽  
Fangjuan Zheng ◽  
Zhuo Zhang ◽  
Hongyu Zhang ◽  
...  

In response to the less accessible fossil resources and deteriorating environmental problems, catalytic conversion of the abundant and renewable lignocellulosic biomass to replace fossil resources for the production of value-added chemicals and fuels is of great importance. Depolymerization of carbohydrate and its derivatives can obtain a series of C5-C6 monosaccharides (e.g., glucose and xylose) and their derived platform compounds (e.g., HMF and furfural). Selective transformation of lignocellulose using sustainable solar energy via photocatalysis has attract broad interest from a growing scientific community. The unique photogenerated reactive species (e.g., h+, e−, •OH, •O2−, and 1O2), novel reaction pathways as well as the mild reaction conditions make photocatalysis a “dream reaction.” This review is aimed to provide an overview of the up-to-date contributions achieved in the selective photocatalytic transformation of carbohydrate and its derivatives. Photocatalytic methods, properties and merits of different catalytic systems are well summarized. We then put forward future perspective and challenges in this field.


2022 ◽  
Vol 19 ◽  
Author(s):  
Gulu Abbasova ◽  
Ajdar Medjidov

Abstract: A one-pot conversion of 2-hydroxy-1-naphthoic aldehyde to hydroxamic acid was described. An efficient photoorganocatalytic method of synthesis was developed. The obtained hydroxamic acid was identified by various physicochemical methods such as IR, UV- and NMR-spectroscopy. Solid colored complexes of copper (II) and iron (II), respectively, green and brown colours with the obtained hydroxamic acid were synthesized in ethanol medium for the first time. The molar ratio of ligand and metal in the complex was 2:1. Their structures were established using IR, UV- spectroscopy and thermogravimetric analysis.


1992 ◽  
Vol 55 (11) ◽  
pp. 893-898 ◽  
Author(s):  
TAKESHI SUZUKI ◽  
FERGUS M. CLYDESDALE ◽  
TIRA PANDOLF

The effect of six organic acids, ascorbic, citric, fumaric, lactic, malic, and succinic, alone and in combination, at a 1:1.9 molar ratio (Fe+2:ligand) on the solubility of iron was evaluated in the presence of lignin under simulated gastrointestinal pH conditions. The enhancing effect, evaluated under two systems of preparation at two pH values, was in the following order: citric>malic>ascorbic>lactic,fumaric>succinic. Citric acid solubilized 80 and 81% of iron under both pH conditions. When ascorbic acid was mixed with fumaric, lactic, and succinic acids, a higher percentage of soluble iron was retained than with these three acids alone. In the case of citric and malic acids, the addition of ascorbic acid reduced the soluble iron. The percentage of soluble iron obtained when prepared at the endogenous pH (2.5–3.1) was higher than that at pH 5.5. These results indicated that ascorbate bound less iron in a soluble form than citrate or malate but more than fumarate, lactate, or succinate. Also, combinations of citric with malic acid did not demonstrate a synergistic effect.


Sign in / Sign up

Export Citation Format

Share Document