scholarly journals Correlation of shear forces and heat conductance in nanoscale junctions

2019 ◽  
Vol 100 (23) ◽  
Author(s):  
Benjamin J. Robinson ◽  
Manuel E. Pumarol ◽  
Oleg V. Kolosov
Keyword(s):  
Shear Forces ◽  
Heat Conductance

The Effect of Ball Pad Metallurgy and Ball Composition on Solder Ball Integrity of Plastic Ball Grid Array Packages

1998 ◽  
Author(s):  
C.H. Zhong ◽  
Sung Yi
Keyword(s):  
Failure Mode ◽  
Barrier Layer ◽  
Shear Force ◽  
Solder Ball ◽  
Ball Grid Array ◽  
Reliability Test ◽  
Shear Forces ◽  
Ball Shear ◽  
Plastic Ball ◽  
Plastic Ball Grid Array

Abstract Ball shear forces of plastic ball grid array (PBGA) packages are found to decrease after reliability test. Packages with different ball pad metallurgy form different intermetallic compounds (IMC) thus ball shear forces and failure modes are different. The characteristic and dynamic process of IMC formed are decided by ball pad metallurgy which includes Ni barrier layer and Au layer thickness. Solder ball composition also affects IMC formation dynamic process. There is basically no difference in ball shear force and failure mode for packages with different under ball pad metallurgy before reliability test. However shear force decreased and failure mode changed after reliability test, especially when packages exposed to high temperature. Major difference in ball shear force and failure mode was found for ball pad metallurgy of Ni barrier layer including Ni-P, pure Ni and Ni-Co. Solder ball composition was found to affect the IMC formation rate.

New Systems for the Digestion of Solid Wastes

1992 ◽  
Vol 25 (7) ◽  
pp. 319-326 ◽  
Author(s):  
A. Wellinger ◽  
U. Baserga ◽  
K. Egger
Keyword(s):  
Dry Matter ◽  
Gas Production ◽  
Matter Content ◽  
Solid Wastes ◽  
Dry Matter Content ◽  
Feeding System ◽  
Shear Forces ◽  
Tank Reactor ◽  
Strong Shear ◽  
First Results

Two new systems for the digestion of solid wastes at thermophilic temperatures were developped and are currently being investigated at our research institute. The first system (ANCOM) was designed to process straw-rich cattle manure with a natural dry matter content of 18% to 22%. First results demonstrated a good specific gas production of 1.2 m3 biogas per m3 digester volume and day (54% methane) corresponding to a gas yield of 400 l per kg VS. A second digester system was developed to treat fruit, garden and vegetable (FGV-) waste. Because FGV-waste tends to float, a stirred tank reactor was designed in cooperation with an engineering firm. The reactor includes a distinguished new stirring system taking up strong shear forces and a hydraulic feeding system which guarantees that even during recirculation of the material, the hygenized digested substrate leaving the digester is not brought in contact with the fresh incoming material. First results measured at an HRT of 40 days demonstrated a specific gas production of 2.7 m3 per m3 fermenter and day.

Shear Forces between Tethered Polymer Chains as a Function of Compression, Sliding Velocity, and Solvent Quality

2003 ◽  
Vol 36 (2) ◽  
pp. 389-398 ◽  
Author(s):  
Phillip A. Schorr ◽  
Thomas C. B. Kwan ◽  
S. Michael Kilbey ◽  
Eric S. G. Shaqfeh ◽  
Matthew Tirrell
Keyword(s):  
Polymer Chains ◽  
Sliding Velocity ◽  
Shear Forces ◽  
Solvent Quality ◽  
Tethered Polymer Chains

Large Deflection of a Rectangular Plate Resting on a Pasternak-Type Elastic Foundation

1977 ◽  
Vol 44 (3) ◽  
pp. 509-511 ◽  
Author(s):  
P. K. Ghosh
Keyword(s):  
Rectangular Plate ◽  
Elastic Foundation ◽  
Large Deflection ◽  
Lateral Load ◽  
Bending Moments ◽  
Shear Forces ◽  
Simply Supported ◽  
Base Parameters ◽  
Square Plate

The problem of large deflection of a rectangular plate resting on a Pasternak-type foundation and subjected to a uniform lateral load has been investigated by utilizing the linearized equation of plates due to H. M. Berger. The solutions derived and based on the effect of the two base parameters have been carried to practical conclusions by presenting graphs for bending moments and shear forces for a square plate with all edges simply supported.

scholarly journals Composite hollow truss with multiple vierendeel panels

2013 ◽  
Vol 66 (4) ◽  
pp. 431-438
Author(s):  
Augusto Ottoni Bueno da Silva ◽  
Newton de Oliveira Pinto Júnior ◽  
João Alberto Venegas Requena
Keyword(s):  
Bearing Capacity ◽  
Failure Modes ◽  
Three Dimensional ◽  
Analytical Calculation ◽  
Two Dimensional ◽  
Shear Forces ◽  
Vertical Displacements ◽  
New System ◽  
The Ideal

The aim of this study was to evaluate through analytical calculation, two-dimensional elastic modeling, and three-dimensional plastic modeling, the bearing capacity and failure modes of composite hollow trusses bi-supported with a 15 meter span, varying the number of central Vierendeel panels. The study found the proportion span/3 - span/3 - span/3, as the ideal relationship for the truss - Vierendeel - truss lengths, because by increasing the proportion of the length occupied by the central Vierendeel panels, the new system loses stiffness and no longer supports the load stipulated in the project. Furthermore, they can start presenting excessive vertical displacements and insufficient resistance to external shear forces acting on the panels.

Dielectric spectroscopy on W/O emulsions under influence of shear forces

1996 ◽  
Vol 274 (8) ◽  
pp. 754-762 ◽  
Author(s):  
T. Skodvin ◽  
J. Sj�blom
Keyword(s):  
Dielectric Spectroscopy ◽  
Shear Forces
Sign in / Sign up

Export Citation Format

Share Document