A reverse logistics inventory model for plastic bottles

2014 ◽  
Vol 25 (2) ◽  
pp. 315-333 ◽  
Author(s):  
Nouri Matar ◽  
Mohamad Y. Jaber ◽  
Cory Searcy
Keyword(s):  
Environmental Damage ◽  
Low Grade ◽  
Total System ◽  
Content Type ◽  
Pet Bottles ◽  
Manual Tasks ◽  
The Cost ◽  
Contaminated Streams ◽  
Future Work ◽  
Varying Demand

Purpose – The purpose of this paper is to present an original model for the production-recycling-reuse of plastic beverage bottles. Design/methodology/approach – It is assumed that discarded two-liter plastic polyethylene terephthalate (PET) bottles are collected from the market. The bottles are then sorted into non-contaminated and contaminated streams. The non-contaminated PET bottles are either remanufactured or used as regrind mixed with virgin PET to produce new bottles to satisfy varying demand. The contaminated bottles are either sold to industries using low-grade plastic or disposed of in a landfill. Numerical studies are used to illustrate the behaviour of the model, with an emphasis on exploring the reduction of total system cost and the amount of bottles going into a landfill. Findings – Numerical analyses conducted on the model found that the amount of bottles collected had the largest influence on the outcome of the total system unit time cost. Alternative materials to PET are surveyed and used to demonstrate a significant reduction in the cost of landfill disposal due to their more rapid degradation in the landfill. Research limitations/implications – Several areas for future work are highlighted. Potential modifications to the model could focus on accommodating bottles made of material other than plastic, incorporating the effects of learning on manual tasks, and on accommodating shortages or excess inventory. Originality/value – The model incorporates several unique aspects, including accounting for the cost of land use and associated environmental damage through the calculation of a present value that is charged to the manufacturer.

scholarly journals A production-recycling-reuse model for plastic beverages bottles

2021 ◽  
Author(s):  
Nouri Dawood Matar
Keyword(s):  
Market Price ◽  
Environmental Damage ◽  
Low Grade ◽  
Total System ◽  
Pet Bottles ◽  
Alternative Materials ◽  
Present Worth ◽  
Polyethylene Terephthalate Bottles ◽  
The Cost ◽  
Varying Demand

In this thesis a recycling-reuse model is developed and analyzed. Discarded 2L plastic PET (polyethylene terephthalate) bottles are collected from the market. The non-contaminated PET bottles are either remanufactured or used as regrind mixed with virgin PET to produce new bottles to satisfy varying demand. Contaminated bottles are sold to industries using low grade plastic and only badly contaminated bottles go to landfill. Cost of land use and associated environmental damage is calculated as a present worth and charged to the manufacture. Analyses conducted on this model found that the amount of bottles collected had the largest influence on the outcome of the total system unit time cost. Alternative materials to PET that degrade faster are surveyed and used to demonstrate significant reduction in the cost of landfill disposal. Analysis using a minimal market price for remanufactured and newly produced bottles resulted in profit.

scholarly journals A production-recycling-reuse model for plastic beverages bottles

2021 ◽  
Author(s):  
Nouri Dawood Matar
Keyword(s):  
Market Price ◽  
Environmental Damage ◽  
Low Grade ◽  
Total System ◽  
Pet Bottles ◽  
Alternative Materials ◽  
Present Worth ◽  
Polyethylene Terephthalate Bottles ◽  
The Cost ◽  
Varying Demand

In this thesis a recycling-reuse model is developed and analyzed. Discarded 2L plastic PET (polyethylene terephthalate) bottles are collected from the market. The non-contaminated PET bottles are either remanufactured or used as regrind mixed with virgin PET to produce new bottles to satisfy varying demand. Contaminated bottles are sold to industries using low grade plastic and only badly contaminated bottles go to landfill. Cost of land use and associated environmental damage is calculated as a present worth and charged to the manufacture. Analyses conducted on this model found that the amount of bottles collected had the largest influence on the outcome of the total system unit time cost. Alternative materials to PET that degrade faster are surveyed and used to demonstrate significant reduction in the cost of landfill disposal. Analysis using a minimal market price for remanufactured and newly produced bottles resulted in profit.

A deterministic inventory model in reverse supply chain

2019 ◽  
Vol 15 (1) ◽  
pp. 318-338 ◽  
Author(s):  
Sasmita Mohapatra ◽  
Ajay Kumar Behera ◽  
Rabindra Mahapatra ◽  
Harish Das
Keyword(s):  
Design Methodology ◽  
Current Model ◽  
Environmental Damage ◽  
Reverse Supply Chain ◽  
Retail Outlet ◽  
Present Value ◽  
Content Type ◽  
Unique Model ◽  
The Cost ◽  
The Mathematical Model

Purpose The purpose of this paper is to present a unique model for the production–recycling–reuse of aluminium refreshment cans. It is presumed that disposed-off 250-ml aluminium cans are collected from the retail outlet. The cans are thereafter arranged into non-tainted and tainted categories. Design/methodology/approach The current model considers all the factors, i.e. producing, recycling and remanufacturing, whereas the previous models provide emphasis only one factor. Six procedures were considered in the improvement of the mathematical model. Findings In this paper, a recycling–reuse model that remanufactures non-tainted aluminium beverage cans and uses regrind from damaged non-tainted aluminium beverage cans mixed with parent aluminium material in the production of new cans was developed and analysed to reduce the amount of aluminium beverage cans that are disposed off in a scrapyard. The model is assumed to have no shortcomings, and the different percentages regarding the classes of cans are taken to be deterministic. Originality/value The model incorporates several unique aspects, including accounting for the cost of land use and associated environmental damage through the calculation of a present value that is charged to the manufacturer.

Combined stereotactic split-course fractionated gamma knife radiosurgery and conventional radiation therapy for unfavorable gliomas: a phase I study

2000 ◽  
Vol 93 (supplement_3) ◽  
pp. 37-41 ◽  
Author(s):  
William F. Regine ◽  
Roy A. Patchell ◽  
James M. Strottmann ◽  
Ali Meigooni ◽  
Michael Sanders ◽  
...  
Keyword(s):  
Radiation Therapy ◽  
Disease Progression ◽  
Gamma Knife ◽  
Gamma Knife Radiosurgery ◽  
External Beam Radiation ◽  
Low Grade ◽  
Beam Radiation ◽  
Content Type ◽  
Group B ◽  
Fine Print

Object. This investigation was performed to determine the tolerance and toxicities of split-course fractionated gamma knife radiosurgery (FSRS) given in combination with conventional external-beam radiation therapy (CEBRT). Methods. Eighteen patients with previously unirradiated, gliomas treated between March 1995 and January 2000 form the substrate of this report. These included 11 patients with malignant gliomas, six with low-grade gliomas, and one with a recurrent glioma. They were stratified into three groups according to tumor volume (TV). Fifteen were treated using the initial FSRS dose schedule and form the subject of this report. Group A (four patients), had TV of 5 cm3 or less (7 Gy twice pre- and twice post-CEBRT); Group B (six patients), TV greater than 5 cm3 but less than or equal to 15 cm3 (7 Gy twice pre-CEBRT and once post-CEBRT); and Group C (five patients), TV greater than 15 cm3 but less than or equal to 30 cm3 (7 Gy once pre- and once post-CEBRT). All patients received CEBRT to 59.4 Gy in 1.8-Gy fractions. Dose escalation was planned, provided the level of toxicity was acceptable. All patients were able to complete CEBRT without interruption or experiencing disease progression. Unacceptable toxicity was observed in two Grade 4/Group B patients and two Grade 4/Group C patients. Eight patients required reoperation. In three (38%) there was necrosis without evidence of tumor. Neuroimaging studies were available for evaluation in 14 patients. Two had a partial (≥ 50%) reduction in volume and nine had a minor (> 20%) reduction in size. The median follow-up period was 15 months (range 9–60 months). Six patients remained alive for 3 to 60 months. Conclusions. The imaging responses and the ability of these patients with intracranial gliomas to complete therapy without interruption or experiencing disease progression is encouraging. Excessive toxicity derived from combined FSRS and CEBRT treatment, as evaluated thus far in this study, was seen in patients with Group B and C lesions at the 7-Gy dose level. Evaluation of this novel treatment strategy with dose modification is ongoing.

The integration of metabolic imaging in stereotactic procedures including radiosurgery: a review

2002 ◽  
Vol 97 ◽  
pp. 542-550 ◽  
Author(s):  
Marc Levivier ◽  
David Wikler ◽  
Nicolas Massager ◽  
Philippe David ◽  
Daniel Devriendt ◽  
...  
Keyword(s):  
Positron Emission Tomography ◽  
Brain Tumors ◽  
Treatment Planning ◽  
Target Volume ◽  
Emission Tomography ◽  
Low Grade ◽  
Content Type ◽  
Positron Emission ◽  
Pet Scanning ◽  
Fine Print

Object. The authors review their experience with the clinical development and routine use of positron emission tomography (PET) during stereotactic procedures, including the use of PET-guided gamma knife radiosurgery (GKS). Methods. Techniques have been developed for the routine use of stereotactic PET, and accumulated experience using PET-guided stereotactic procedures over the past 10 years includes more than 150 stereotactic biopsies, 43 neuronavigation procedures, and 34 cases treated with GKS. Positron emission tomography—guided GKS was performed in 24 patients with primary brain tumors (four pilocytic astrocytomas, five low-grade astrocytomas or oligodendrogliomas, seven anaplastic astrocytomas or ependymomas, five glioblastomas, and three neurocytomas), five patients with metastases (single or multiple lesions), and five patients with pituitary adenomas. Conclusions. Data obtained with PET scanning can be integrated with GKS treatment planning, enabling access to metabolic information with high spatial accuracy. Positron emission tomography data can be successfully combined with magnetic resonance imaging data to provide specific information for defining the target volume for the radiosurgical treatment in patients with recurrent brain tumors, such as glioma, metastasis, and pituitary adenoma. This approach is particularly useful for optimizing target selection for infiltrating or ill-defined brain lesions. The use of PET scanning contributed data in 31 cases (93%) and information that was specifically utilized to adapt the target volume in 25 cases (74%). It would seem that the integration of PET data into GKS treatment planning may represent an important step toward further developments in radiosurgery: this approach provides additional information that may open new perspectives for the optimization of the treatment of brain tumors.

Welcome to the marriage of human capability and artificial intelligence

2019 ◽  
Vol 19 (1) ◽  
pp. 10-14
Author(s):  
Ryan Scott ◽  
Malcolm Le Lievre
Keyword(s):  
Artificial Intelligence ◽  
Team Building ◽  
Workplace Change ◽  
Content Type ◽  
The Future ◽  
Human Capability ◽  
Mind Set ◽  
Future Work ◽  
Crucial Part ◽  
Practical Implications

Purpose The purpose of this paper is to explore insights methodology and technology by using behavioral to create a mind-set change in the way people work, especially in the age of artificial intelligence (AI). Design/methodology/approach The approach is to examine how AI is driving workplace change, introduce the idea that most organizations have untapped analytics, add the idea of what we know future work will look like and look at how greater, data-driven human behavioral insights will help prepare future human-to-human work and inform people’s work with and alongside AI. Findings Human (behavioral) intelligence will be an increasingly crucial part of behaviorally smart organizations, from hiring to placement to adaptation to team building, compliance and more. These human capability insights will, among other things, better prepare people and organizations for changing work roles, including working with and alongside AI and similar tech innovation. Research limitations/implications No doubt researchers across the private, public and nonprofit sectors will want to further study the nexus of human capability, behavioral insights technology and AI, but it is clear that such work is already underway and can prove even more valuable if adopted on a broader, deeper level. Practical implications Much “people data” inside organizations is currently not being harvested. Validated, scalable processes exist to mine that data and leverage it to help organizations of all types and sizes be ready for the future, particularly in regard to the marriage of human capability and AI. Social implications In terms of human capability and AI, individuals, teams, organizations, customers and other stakeholders will all benefit. The investment of time and other resources is minimal, but must include C-suite buy in. Originality/value Much exists on the softer aspects of the marriage of human capability and AI and other workplace advancements. What has been lacking – until now – is a 1) practical, 2) validated and 3) scalable behavioral insights tech form that quantifiably informs how people and AI will work in the future, especially side by side.

The cost-effectiveness of insulin analogs and regular insulin for diabetes control: a case study in Iran

2020 ◽  
Vol 33 (4/5) ◽  
pp. 323-331
Author(s):  
Mohsen pakdaman ◽  
Raheleh akbari ◽  
Hamid reza Dehghan ◽  
Asra Asgharzadeh ◽  
Mahdieh Namayandeh
Keyword(s):  
Cost Effectiveness ◽  
Cost Effective ◽  
Regular Insulin ◽  
Diabetes Control ◽  
Diabetic Patients ◽  
Insulin Analogs ◽  
Content Type ◽  
Patients With Diabetes ◽  
The Government ◽  
The Cost

PurposeFor years, traditional techniques have been used for diabetes treatment. There are two major types of insulin: insulin analogs and regular insulin. Insulin analogs are similar to regular insulin and lead to changes in pharmacokinetic and pharmacodynamic properties. The purpose of the present research was to determine the cost-effectiveness of insulin analogs versus regular insulin for diabetes control in Yazd Diabetes Center in 2017.Design/methodology/approachIn this descriptive–analytical research, the cost-effectiveness index was used to compare insulin analogs and regular insulin (pen/vial) for treatment of diabetes. Data were analyzed in the TreeAge Software and a decision tree was constructed. A 10% discount rate was used for ICER sensitivity analysis. Cost-effectiveness was examined from a provider's perspective.FindingsQALY was calculated to be 0.2 for diabetic patients using insulin analogs and 0.05 for those using regular insulin. The average cost was $3.228 for analog users and $1.826 for regular insulin users. An ICER of $0.093506/QALY was obtained. The present findings suggest that insulin analogs are more cost-effective than regular insulin.Originality/valueThis study was conducted using a cost-effectiveness analysis to evaluate insulin analogs versus regular insulin in controlling diabetes. The results of study are helpful to the government to allocate more resources to apply the cost-effective method of the treatment and to protect patients with diabetes from the high cost of treatment.

scholarly journals Enhanced Thermoelectric Performance of n-Type Bi2Se3 Nanosheets through Sn Doping

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1827
Author(s):  
Mengyao Li ◽  
Yu Zhang ◽  
Ting Zhang ◽  
Yong Zuo ◽  
Ke Xiao ◽  
...  
Keyword(s):  
Figure Of Merit ◽  
Cost Effective ◽  
Low Grade ◽  
Hot Press ◽  
Processing Technologies ◽  
Sn Doping ◽  
Practical Applications ◽  
Alternative Materials ◽  
The Cost ◽  
Low Grade Heat

The cost-effective conversion of low-grade heat into electricity using thermoelectric devices requires developing alternative materials and material processing technologies able to reduce the currently high device manufacturing costs. In this direction, thermoelectric materials that do not rely on rare or toxic elements such as tellurium or lead need to be produced using high-throughput technologies not involving high temperatures and long processes. Bi2Se3 is an obvious possible Te-free alternative to Bi2Te3 for ambient temperature thermoelectric applications, but its performance is still low for practical applications, and additional efforts toward finding proper dopants are required. Here, we report a scalable method to produce Bi2Se3 nanosheets at low synthesis temperatures. We studied the influence of different dopants on the thermoelectric properties of this material. Among the elements tested, we demonstrated that Sn doping resulted in the best performance. Sn incorporation resulted in a significant improvement to the Bi2Se3 Seebeck coefficient and a reduction in the thermal conductivity in the direction of the hot-press axis, resulting in an overall 60% improvement in the thermoelectric figure of merit of Bi2Se3.

Health, happiness and your future: using a “men’s group” format to work with homeless men in London

2017 ◽  
Vol 13 (4) ◽  
pp. 403-418
Author(s):  
Kate Thompson ◽  
Pippa Brown ◽  
Stephanie Vieira
Keyword(s):  
Mental Health ◽  
Psychosocial Issues ◽  
Horn Of Africa ◽  
Content Type ◽  
Health And Wellbeing ◽  
Care Services ◽  
Homeless Men ◽  
Group Members ◽  
Future Work ◽  
The Impact

Purpose The purpose of this paper is to describe an intervention with a group of homeless men from the Horn of Africa, service users of the Horn of Africa Health and Wellbeing Project in London. The group was conceived by the second author who noted the presence of significant psychosocial issues for her clients, but equally their reluctance to access mainstream mental health or social care services. Design/methodology/approach Designing the group and introducing it to the men involved threw up some challenges which are explored, and the impact of the group on participants is evaluated. Findings Overall both the participants and the facilitators evaluated the group positively and it appeared to have led to lasting change for some of the group members, and this is described. The authors argue that this sort of group may be a more acceptable way to work on psychosocial issues than something more directly focused on mental health intervention. The group protocol is outlined along with suggestions for future work in this area. Originality/value This intervention represents a creative alternative to more mainstream psychological interventions for homeless or exiled men.

Sign in / Sign up

Export Citation Format

Share Document