Tribological characterization on friction brake in continuous braking

2018 ◽  
Vol 70 (1) ◽  
pp. 172-181 ◽  
Author(s):  
Jiusheng Bao ◽  
Yan Yin ◽  
Lijian Lu ◽  
Tonggang Liu
Keyword(s):  
Friction Coefficient ◽  
Wear Rate ◽  
Tribological Properties ◽  
Temperature Rise ◽  
Characteristic Parameter ◽  
Tribological Characteristic ◽  
Content Type ◽  
Average Temperature ◽  
Trend Coefficient ◽  
Dynamic Wear

Purpose The purpose of this study is to establish an effective method for characterizing the tribological properties of friction brakes during continuous braking because they have direct influences on the reliable operation of transport vehicles and industrial equipments. Design/methodology/approach First, tribological tests were carried out with the X-DM type friction tester, and changing curves of friction coefficient and temperature were obtained. Second, a novel tribological characteristic parameter set characterizing the tribological properties of brake pair in continuous braking was extracted from some important experimental data such as friction coefficient, wear rate and temperature. Finally, the influence of law and mechanism of braking number on dynamic tribological parameters was studied through continuous braking experiments. Findings The extracted tribological characteristic parameter set includes two subsets: dynamic characteristic parameter subset and overall characteristic parameter subset, which is composed of ten parameters: dynamic parameters of friction coefficient (including average, trend coefficient and stability coefficient), dynamic wear rate, dynamic average temperature, dynamic temperature rise, overall average friction coefficient, overall wear rate, overall average temperature and overall temperature rise. Originality/value Conclusively, the novel tribological characteristic parameter set is more comprehensive and objective, and it can provide a theoretical basis for the study of tribological properties in continuous braking.

A new temperature parameter set for characterizing the frictional temperature rise of disc brakes

2016 ◽  
Vol 68 (1) ◽  
pp. 35-44 ◽  
Author(s):  
Yan Yin ◽  
Xingming Xiao ◽  
Jiusheng Bao ◽  
Jinge Liu ◽  
Yuhao Lu ◽  
...  
Keyword(s):  
Dynamic Characteristics ◽  
Temperature Rise ◽  
Initial Temperature ◽  
Characteristic Parameter ◽  
Maximum Temperature ◽  
Content Type ◽  
Average Temperature ◽  
Disc Brakes ◽  
Temperature Parameter ◽  
Temperature Time

Purpose – The purpose of this study is to establish a new temperature set for characterizing the frictional temperature rise (FTR) of disc brakes. The FTR produced by braking is an important factor which directly affects the tribological properties of disc brakes. Presently, most existing researches characterize the FTR only by several static parameters such as average temperature or maximum temperature, which cannot reflect accurately the dynamic characteristics of temperature variation in the process of braking. In this paper, a new temperature parameter set was extracted and the influences of braking conditions on these parameters were investigated by experiments. Design/methodology/approach – First, several simulated braking experiments of disc brakes were conducted to reveal the dynamic variation rules and mechanisms of the FTR in braking. Second, the characteristic parameter subset of the FTR was extracted with five significant parameters, namely, initial temperature, average temperature, end temperature, maximum temperature and the ratio of maximum temperature time. Furthermore, the fitting parameter subset of the FTR was constructed based on the temperature rise curve. Finally, the influence and mechanisms of initial braking velocity and braking pressure on the new temperature parameter set were investigated through braking experiments. Findings – This paper extracted a new temperature parameter set including a characteristic parameter subset and a fitting parameter subset and revealed the influences of braking conditions on it by experiments. Originality/value – The results showed that the new temperature parameter set extracted in this paper can characterize the dynamic characteristics of disc brake’s FTR variations more objectively and comprehensively. The research results will provide a theoretical basis for extracting the fault feature of friction properties.

Study on high-temperature wear and mechanism of Al-Si/graphite composites prepared by the die-casting process

2020 ◽  
Vol 72 (10) ◽  
pp. 1153-1158 ◽  
Author(s):  
Yafei Deng ◽  
Xiaotao Pan ◽  
Guoxun Zeng ◽  
Jie Liu ◽  
Sinong Xiao ◽  
...  
Keyword(s):  
Friction Coefficient ◽  
Wear Rate ◽  
Peer Review ◽  
Die Casting ◽  
Casting Machine ◽  
Injection Pressure ◽  
Casting Process ◽  
Matrix Alloy ◽  
Content Type ◽  
The Matrix

Purpose This paper aims to improve the tribological properties of aluminum alloys and reduce their wear rate. Design/methodology/approach Carbon is placed in the model at room temperature, pour 680°C of molten aluminum into the pressure chamber, and then pressed it into the mold containing carbon felt through a die casting machine, and waited for it to cool, which used an injection pressure of 52.8 MPa and held the same pressure for 15 s. Findings The result indicated that the mechanical properties of matrix and composite are similar, and the compressive strength of the composite is only 95% of the matrix alloy. However, the composite showed a low friction coefficient, the friction coefficient of Gr/Al composite is only 0.15, which just is two-third than that of the matrix alloy. Similarly, the wear rate of the composite is less than 4% of the matrix. In addition, the composite can avoid severe wear before 200°C, but the matrix alloy only 100°C. Originality/value This material has excellent friction properties and is able to maintain this excellent performance at high temperatures. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2019-0454/

Experimental study on the effect of surface texture on tribological properties of nanodiamond films under water lubrication

2021 ◽  
pp. 135065012110334
Author(s):  
Ying Yan ◽  
Xuelin Lei ◽  
Yun He
Keyword(s):  
Friction Coefficient ◽  
Wear Rate ◽  
Tribological Properties ◽  
Surface Texture ◽  
Diamond Film ◽  
Diamond Films ◽  
Nanocrystalline Diamond ◽  
Water Contact ◽  
Texture Density ◽  
Short Run

The effect of nanoscale surface texture on the frictional and wear performances of nanocrystalline diamond films under water-lubricating conditions were comparatively investigated using a reciprocating ball-on-flat tribometer. Although the untreated nanocrystalline diamond film shows a stable frictional state with an average friction coefficient of 0.26, the subsequent textured films show a beneficial effect on rapidly reducing the friction coefficient, which decreased to a stable value of 0.1. Furthermore, compared with the nanocrystalline diamond coating, the textured films showed a large decreasing rate of the corresponding ball wear rate from 4.16 × 10−3 to 1.15 × 10−3 mm3/N/m. This is due to the fact that the hydrodynamic fluid film composed of water and debris can provide a good lubrication environment, so the entire friction process has reached the state of fluid lubrication. Meanwhile, the surface texture can greatly improve the hydrophilicity of the diamond films, and as the texture density increases, the water contact angle decreases from 94.75° of the nanocrystalline diamond film to 78.5° of the textured films. The proper textured diamond film (NCD90) exhibits superior tribological properties among all tested diamond films, such as short run-in period, low coefficient of friction, and wear rate.

Friction and Wear Behaviors of Solid Lubricants/Polyimide Composites in Liquid Mediums

2010 ◽  
Vol 654-656 ◽  
pp. 2763-2766 ◽  
Author(s):  
Li Wen Mu ◽  
Xin Feng ◽  
Yi Jun Shi ◽  
Huai Yuan Wang ◽  
Xiao Hua Lu
Keyword(s):  
Friction Coefficient ◽  
Wear Rate ◽  
Tribological Properties ◽  
Alkaline Solution ◽  
Dry Friction ◽  
Friction And Wear ◽  
Solid Lubricants ◽  
Polyimide Composites ◽  
Inorganic Fillers ◽  
Ptfe Composites

The tribological properties of polyimide (PI) composites reinforced with graphite or MoS2 sliding in liquid alkali and water as well as dry friction were investigated using a ring-on-ring tester. The results show that the friction coefficient (μ) and wear rate (W) for both graphite/PI and MoS2/PI composites in different liquid mediums are μdry>μwater >μalkali and Wwater>Wdry >Walkali. Results also indicate that the friction coefficient and wear rate of the PI composites filled with different solid lubricants are μMoS2 >μgraphite and W MoS2 >Wgraphite in different liquid mediums. In addition, the hydrophobic inorganic fillers are fit for the reinforcement of polymer-based composites sliding in liquid mediums. It is also concluded from the authors’ work that the wear rate and friction coefficient of polymer-based (such as PI, PTFE) composites in the alkali lubricated conditions is lowest among all the friction conditions. This may be attributed to the ionic hydration in the alkaline solution.

Tribological and electrical behavior of Cu-based composites with addition of Ti-doped NbSe2 nanoplatelets

2018 ◽  
Vol 70 (3) ◽  
pp. 560-567 ◽  
Author(s):  
Jian Feng Li ◽  
Qin Shi ◽  
HeJun Zhu ◽  
ChenYu Huang ◽  
Shuai Zhang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Solid State ◽  
Friction Coefficient ◽  
Electrical Properties ◽  
Tribological Properties ◽  
Solid State Reaction ◽  
Electrical Contact ◽  
Solid State Reaction Method ◽  
Content Type ◽  
Reaction Method

Purpose This paper aims to clarify the size and morphology of transition metal dichalcogenides has an impact on lubrication performance of Cu-based composites. This study is intended to show that Cu-based electrical contact materials containing Nb0.91Ti0.09Se2 have better electrical and tribological properties than those containing NbSe2. The tribological properties of Cu-based with different Ti-dopped NbSe2 content were also discussed. Design/methodology/approach The NbSe2 and Nb0.91Ti0.09Se2 particles were fabricated by thermal solid state reaction method. The powder metallurgy technique was used to fabricate composites with varying Nb0.91Ti0.09Se2 mass fraction. The phase composition of Cu-based composites was identified by X-ray diffraction, and the morphology of NbSe2/Nb0.91Ti0.09Se2 and the worn surface of composites were characterized by scanning electron microscopy and transmission electron microscopy. In addition, the tribological properties of composites were appraised using a ball-on-disk multi-functional tribometer. The data of friction coefficient and resistivity were analyzed and the corresponding conclusion was drawn. Findings In comparison with the pure copper, Cu-based composites containing Nb0.91Ti0.09Se2/NbSe2 had a lower friction coefficient, illustrating the Nb0.91Ti0.09Se2 with nano-size particles prepared in this work is a perfect choice for the fabrication of excellent electrical contact composites. Compared to composites with NbSe2, composites containing Nb0.91Ti0.09Se2 have better tribological and electrical properties. Research limitations/implications Because of the use of thermal solid state reaction method, the size of NbSe2 and Nb0.91Ti0.09Se2 is relatively large. Therefore, the fabrication of finer particles of Nb0.91Ti0.09Se2 is encouraged. Originality/value In this paper, the authors discuss the tribological and electrical properties of Cu-based composites, and the value of optimum obtained as Nb0.91Ti0.09Se2 content is 15 Wt.%.

scholarly journals Influence of load and reinforcement content on selected tribological properties of Al/SiC/Gr hybrid composites

2018 ◽  
Vol 18 (18) ◽  
pp. 18-23 ◽  
Author(s):  
Sandra Veličković ◽  
Slavica Miladinović ◽  
Blaža Stojanović ◽  
Ružica R. Nikolić ◽  
Branislav Hadzima ◽  
...  
Keyword(s):  
Aluminum Alloy ◽  
Friction Coefficient ◽  
Wear Rate ◽  
Tribological Properties ◽  
Metal Matrix ◽  
Hybrid Composites ◽  
Tribological Characteristics ◽  
Volume Fractions ◽  
Sic Particles ◽  
The Matrix

Abstract Hybrid materials with the metal matrix are important engineering materials due to their outstanding mechanical and tribological properties. Here are presented selected tribological properties of the hybrid composites with the matrix made of aluminum alloy and reinforced by the silicon carbide and graphite particles. The tribological characteristics of such materials are superior to characteristics of the matrix – the aluminum alloy, as well as to characteristics of the classical metal-matrix composites with a single reinforcing material. Those characteristics depend on the volume fractions of the reinforcing components, sizes of the reinforcing particles, as well as on the fabrication process of the hybrid composites. The considered tribological characteristics are the friction coefficient and the wear rate as functions of the load levels and the volume fractions of the graphite and the SiC particles. The wear rate increases with increase of the load and the Gr particles content and with reduction of the SiC particles content. The friction coefficient increases with the load, as well as with the SiC particles content increase.

Experimental study on friction coefficient and temperature rise of heavy-load grease-lubricated spherical plain bearings with surface texture

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Jinlong Shen ◽  
Tong Zhang ◽  
Jimin Xu ◽  
Xiaojun LIU ◽  
Kun Liu
Keyword(s):  
Friction Coefficient ◽  
Temperature Rise ◽  
Surface Texture ◽  
Tribological Performance ◽  
Textured Surface ◽  
Textured Surfaces ◽  
Roughness Parameters ◽  
Heavy Load ◽  
Friction Coefficients ◽  
Content Type

Purpose This paper aims to improve the tribological performance of grease-lubricated spherical plain bearings (SPBs) under heavy load, dimple-type textures were prepared by laser on the outer surface of the inner ring. The influence of roughness parameters of a textured surface on reducing friction coefficient and temperature rise was also explored. Design/methodology/approach This study adopts a laser processing method to fabricate dimple-type textures. Three-dimensional roughness parameters were used to characterize the textured surfaces. The friction coefficients of five SPBs with surface texture and one original commercially available SPB without surface texture under different nominal loads were measured on a self-established test rig. The data of temperature rise were obtained by nine embedded thermal couples. Findings The results indicate that SPBs with textures generally exhibit lower friction coefficients than the original SPB without textures. The dimple depth has a significant influence on improving the tribological performance, which coincides with the analysis by surface roughness parameters. A textured surface with negative Ssk and high Vvc has the minimum temperature rise. Originality/value As it is too difficult to arrange sensors into heavy-load SPBs, there are few reports about the temperature characteristics. Through nine embedded thermal couples, the distribution of temperature rise on the inner ring of SPBs was given in this study. The positive effect of surface texture on reducing temperature rise and friction coefficient was verified, which is beneficial for the design of heavy-load SPBs.

Size effect on thermal elastohydrodynamic lubrication of industrial chain bush-pin hinge pair

2019 ◽  
Vol 71 (9) ◽  
pp. 1080-1085 ◽  
Author(s):  
Mingyu Zhang ◽  
Jing Wang ◽  
Yi Liu ◽  
Longjie Dai ◽  
Zhaohua Shang
Keyword(s):  
Friction Coefficient ◽  
Film Thickness ◽  
Temperature Rise ◽  
Elastohydrodynamic Lubrication ◽  
Curvature Radius ◽  
Line Contact ◽  
Content Type ◽  
Oil Film ◽  
Industrial Chain ◽  
Infinite Line

Purpose The purpose of this paper is to use elastohydrodynamic lubrication (EHL) theory to study the variation of the equivalent curvature radius “R” on the change of oil film thickness, pressure, temperature rise and friction coefficient in the contact zone between bush-pin in industrial chain drive. Design/methodology/approach In this paper, the contact between bush and pin is simplified as infinitely long line contact. The lubrication state is studied by numerical simulation using steady-state line contact thermal EHL. The two constitutive equations, namely, Newton fluid and Ree–Eyring fluid are used in the calculations. Findings It is found that with the increase of equivalent curvature radius, the thickness of oil film decreases and the temperature rise increases. Under the same condition, the friction coefficient of Newton fluid is higher than that of Ree–Eyring fluid. When the load increases, the oil film thickness decreases, the temperature rise increases and the friction coefficient decreases; and the film thickness increases with the increase of the entraining speed under the condition “R < 1,000 mm”. Research limitations/implications The infinite line contact assumption is only an approximation. For example, the distances between the two inner plates are 5.72 mm, by considering the two parts assembled into the inner plates, the total length of the bush is less than 6 mm. The diameter of the pin and the bore diameter of the bush are 3.28 and 3.33 mm. However, the infinite line contact is also helpful in understanding the general variation of oil film characteristics and provides a reference for the future study of finite line contact of chain problems. Originality/value The change of the equivalent radius R on the variation of the oil film in the contact of the bush and the pin in industrial chain drive was investigated. The size effect influences the lubrication characteristic greatly in the bush-pin pair.

scholarly journals Fabrication and Tribological Properties of Copper Matrix Solid Self-Lubricant Composites Reinforced with Ni/NbSe2 Composites

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1854
Author(s):  
Fei-xia Zhang ◽  
Yan-qiu Chu ◽  
Chang-sheng Li
Keyword(s):  
Powder Metallurgy ◽  
Friction Coefficient ◽  
Wear Rate ◽  
Tribological Properties ◽  
Friction And Wear ◽  
Copper Matrix ◽  
Wear Properties ◽  
Disk Friction ◽  
Friction Reducing ◽  
Properties Of Composites

This paper presents a facile and effective method for preparing Ni/NbSe2 composites in order to improve the wettability of NbSe2 and copper matrix, which is helpful in enhancing the friction-reducing and anti-wear properties of copper-based composites. The powder metallurgy (P/M) technique was used to fabricate copper-based composites with different weight fractions of Ni/NbSe2, and tribological properties of composites were evaluated by using a ball-on-disk friction-and-wear tester. Results indicated that tribological properties of copper-based composites were improved by the addition of Ni/NbSe2. In particular, copper-based composites containing 15 wt.% Ni/NbSe2 showed the lowest friction coefficient (0.16) and wear rate (4.1 × 10−5 mm3·N−1·m−1) among all composites.

scholarly journals Effect of Load on the Tribological Properties of Eutectic Al-Si Reinforced n-Al2O3 under Dry Sliding Conditions

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Pranav Dev Srivyas ◽  
M.S. Charoo
Keyword(s):  
Friction Coefficient ◽  
Wear Rate ◽  
Spark Plasma Sintering ◽  
Tribological Properties ◽  
High Load ◽  
Dry Sliding ◽  
Advanced Composite ◽  
Plasma Sintering ◽  
Spark Plasma ◽  
Composite Samples

Advanced composites are the materials of the new generation. Hence, the focus of the study is to determine the tribological properties of the eutectic Al-Si alloy reinforced with (2, 4, 6, 8, and10 wt. %) of n-Al2O3 against chrome-plated steel ball under dry sliding conditions. The novelty of this work is the fabrication of the composite sample with this elemental composition, which is not done before. Spark plasma sintering (SPS) nonconventional fabrication method is used to fabricate advanced composite samples. Friction coefficient (COF) and wear rate of the composite samples were studied under high load, varying from 50 N to 300 N, using the ball-on-disc tribometer configuration, with other parameters such as stroke, frequency, sliding distance, and sliding velocity remaining constant at 2 mm, 30 Hz, 120 meter, and 0.120 m/s, respectively. Reduction in wear volume for the advanced composite was reported in the range 15.45–44.58% compared to the base alloy (eutectic Al-Si alloy). An increase in friction coefficient was reported in the range 28.80–35.65% compared to the base matrix alloy material. It was also reported that the wear rate increases and the friction coefficient of the composite sample decreases with an increase in load for the tribo-pair. It was observed that an increase in the wt. % of reinforcement influences the friction and wear behavior of the composite. Wear mechanism at high load was characterized by plastic deformation, adhesion, delamination, and abrasion wear. For pre- and postcharacterization of surface and worn tracks, scanning electron microscopy (SEM) electron dispersion spectroscopy (EDS), 3D surface profilometer, and optical microscopy were used. This work aimed to investigate the influence of load on the tribological properties of Al-Si eutectic reinforced n-Al2O3 under dry sliding conditions. Its main objective was to provide a new contribution to the tribological behavior of these composites fabricated using the nonconventional spark plasma sintering method.

Sign in / Sign up

Export Citation Format

Share Document