Effect of unleaded gasoline blended with biofuels on gasoline injector wear and exhaust emissions

2017 ◽  
Vol 69 (2) ◽  
pp. 208-214 ◽  
Author(s):  
De-Xing Peng
Keyword(s):  
Fossil Fuels ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Fuel Additive ◽  
Unleaded Gasoline ◽  
High Oxygen Content ◽  
Complete Combustion ◽  
Content Type ◽  
Gasoline Engines ◽  
Blended Fuels

Purpose To prolong engine life and reduce exhaust pollution caused by gasoline engines, the aim of this paper was to compare the lubrication properties of biofuel (ethanol) blends and pure unleaded gasoline. Design/methodology/approach Biofuels with a concentration of 0, 1, 2, 5 and 10 per cent were added to unleaded gasoline to form ethanol-blended fuels named E0, E1, E2, E5 and E10. Next, the ethanol-blended fuels and unleaded gasoline were used to power engines to facilitate comparisons between the pollution created from exhaust emissions. Findings Using ethanol as a fuel additive in pure unleaded gasoline improves engine performance and reduces exhaust emissions. Because bioethanol does not contain lead but contains low aromatic and high oxygen content, it induces more complete combustion compared with conventional unleaded gasoline. Originality/value Using biofuels as auxiliary fuel reduces environmental pollution, strengthens local agricultural economy, creates employment opportunities and reduces demand for fossil fuels.

scholarly journals A Comparison of Ethanol, Methanol, and Butanol Blending with Gasoline and Its Effect on Engine Performance and Emissions Using Engine Simulation

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1322
Author(s):  
Simeon Iliev
Keyword(s):  
Alternative Fuels ◽  
Fossil Fuels ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Engine Simulation ◽  
Engine Model ◽  
Fuel Blends ◽  
Performance And Emissions ◽  
Blended Fuels

Air pollution, especially in large cities around the world, is associated with serious problems both with people’s health and the environment. Over the past few years, there has been a particularly intensive demand for alternatives to fossil fuels, because when they are burned, substances that pollute the environment are released. In addition to the smoke from fuels burned for heating and harmful emissions that industrial installations release, the exhaust emissions of vehicles create a large share of the fossil fuel pollution. Alternative fuels, known as non-conventional and advanced fuels, are derived from resources other than fossil fuels. Because alcoholic fuels have several physical and propellant properties similar to those of gasoline, they can be considered as one of the alternative fuels. Alcoholic fuels or alcohol-blended fuels may be used in gasoline engines to reduce exhaust emissions. This study aimed to develop a gasoline engine model to predict the influence of different types of alcohol-blended fuels on performance and emissions. For the purpose of this study, the AVL Boost software was used to analyse characteristics of the gasoline engine when operating with different mixtures of ethanol, methanol, butanol, and gasoline (by volume). Results obtained from different fuel blends showed that when alcohol blends were used, brake power decreased and the brake specific fuel consumption increased compared to when using gasoline, and CO and HC concentrations decreased as the fuel blends percentage increased.

Tribological and emission characteristics of indirect ignition diesel engine fuelled with waste edible oil

2016 ◽  
Vol 68 (5) ◽  
pp. 554-560 ◽  
Author(s):  
De-Xing Peng
Keyword(s):  
Economic Growth ◽  
Diesel Engine ◽  
Diesel Fuel ◽  
Fossil Fuels ◽  
Fuel Injection ◽  
Engine Performance ◽  
Vital Role ◽  
Fuel Additive ◽  
Content Type ◽  
Lubricating Property

Purpose Energy is the prime mover of economic growth and is vital to the sustenance of a modern economy. Future economic growth depends heavily on the long-term availability of energy from sources that are affordable, accessible and environmentally friendly. Regulating the sulfur content in diesel fuel is expected to reduce the lubricity of these fuels, which may result in increased wear and damage of fuel injection systems in diesel engines. Design/methodology/approach The tribological properties of the biodiesels as additive in pure petro-diesel are studied by ball-on-ring wear tester to find optimal concentration, and the mechanism of the reduction of wear and friction will be investigated by optical microscopy. Findings Studies have shown that low concentrations of biodiesel blends are more effective as lubricants because of their superior polarity. Using biodiesel as a fuel additive in a pure petroleum diesel fuel improves engine performance and exhaust emissions. The high biodegradability and superior lubricating property of biodiesel when used in compression ignition engines renders it an excellent fuel. Originality/value This detailed experimental investigation confirms that biodiesel can substitute mineral diesel without any modification in the engine. The use of biofuels as diesel engine fuels can play a vital role in helping the developed and developing countries to reduce the environmental impact of fossil fuels.

scholarly journals Review of Performance and Emmissions Characteristics of Bio-Additive Fuel on SI Engine Fuelled by Biopetrol

2015 ◽  
Vol 773-774 ◽  
pp. 430-434
Author(s):  
Azizul Mokhtar ◽  
Nazrul Atan ◽  
Najib Rahman ◽  
Amir Khalid
Keyword(s):  
Fuel Economy ◽  
Fossil Fuels ◽  
Review Paper ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Spark Ignition Engine ◽  
Si Engine ◽  
New Approach ◽  
Performance And Emission ◽  
Performance And Emissions

Bio-additive is biodegradable and produces less air pollution thus significant for replacing the limited fossil fuels and reducing threats to the environment from exhaust emissions and global warming. Instead, the bio-additives can remarkably improve the fuel economy SI engine while operating on all kinds of fuel. Some of the bio-additive has the ability to reduce the total CO2 emission from internal petrol engine. This review paper focuses to determine a new approach in potential of bio-additives blends operating with bio-petrol on performance and emissions of spark ignition engine. It is shown that the variant in bio-additives blending ratio and engine operational condition are reduced engine-out emissions and increased efficiency. It seems that the bio-additives can increase the maximum cylinder combustion pressure, improve exhaust emissions and largely reduce the friction coefficient. The review concludes that the additives usage in bio-petrol is inseparable for the better engine performance and emission control and further research is needed to develop bio-petrol specific additives.

scholarly journals Control of Exhaust Emissions Using Piston Coating on Two-StrokeSI Engines with Gasoline Blends

2021 ◽  
Vol 8 (1) ◽  
pp. H16-H20
Author(s):  
A.V.N.S. Kiran ◽  
B. Ramanjaneyulu ◽  
M. Lokanath M. ◽  
S. Nagendra ◽  
G.E. Balachander
Keyword(s):  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Specific Fuel Consumption ◽  
Thermal Barrier ◽  
Piston Crown ◽  
Barrier Coating

An increase in fuel utilization to internal combustion engines, variation in gasoline price, reduction of the fossil fuels and natural resources, needs less carbon content in fuel to find an alternative fuel. This paper presents a comparative study of various gasoline blends in a single-cylinder two-stroke SI engine. The present experimental investigation with gasoline blends of butanol and propanol and magnesium partially stabilized zirconium (Mg-PSZ) as thermal barrier coating on piston crown of 100 µm. The samples of gasoline blends were blended with petrol in 1:4 ratios: 20 % of butanol and 80 % of gasoline; 20 % of propanol and 80 % of gasoline. In this work, the following engine characteristics of brake thermal efficiency (BTH), specific fuel consumption (SFC), HC, and CO emissions were measured for both coated and non-coated pistons. Experiments have shown that the thermal efficiency is increased by 2.2 % at P20. The specific fuel consumption is minimized by 2.2 % at P20. Exhaust emissions are minimized by 2.0 % of HC and 2.4 % of CO at B20. The results strongly indicate that the combination of thermal barrier coatings and gasoline blends can improve engine performance and reduce exhaust emissions.

scholarly journals Performance of Diesel Engine using Bio-Fuel From Sesame Oil

2019 ◽  
Vol 8 (10) ◽  
pp. 1554-1558 ◽  
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Fossil Fuels ◽  
Industrial Revolution ◽  
Engine Performance ◽  
High Standard ◽  
Alternative Fuel ◽  
Exhaust Emissions ◽  
High Viscosity ◽  
Sesame Oil

Energy has become a crucial factor for humanity to continue the economic growth and maintain high standard of living especially after industrial revolution. “Fossil fuels are still the main source of energy. But the endless consumption of fossil fuels will bring the reserve to an end in near future. As a result fuel prices are soaring because of diminishing supply than demand. So researchers world over are in constant search of alternate fuels in the last three to four years, aimed at reducing CO2 emissions and global dependency on fossil fuels. The use of vegetable oils as a fuel in diesel engine causes some problems due to their high viscosity compared with conventional diesel fuel. Various techniques and methods are used to solve the problems resulting from high viscosity. One of these techniques is blending of fuel. In this study, a mix of 5%, 10%,15%, 20%, 25% sesame oil and diesel fuel was used as alternative fuel in a direct injection diesel engine. Diesel engine performance and exhaust emissions were investigated and compared with the diesel fuel in a diesel engine. The experimental results show that the engine power and torque of the mixture of sesame oil diesel fuel are close to the values obtained from diesel fuel and the amount of exhaust emissions are lower than those of diesel fuel. Hence it is seen that mix of sesame oil 20% and 80% diesel fuel can be used as an alternative fuel successfully in a diesel engine without any modification and also it is an environmental friendly” fuel in terms of emission parameters.

Physical-Chemical Properties and Engine Performance of Blends of Biofuels with Gasoline

2021 ◽  
Vol 15 (2) ◽  
pp. 163-170
Author(s):  
Zhuo Chen ◽  
Zhiwei Wang ◽  
Tingzhou Lei ◽  
Ashwani K. Gupta
Keyword(s):  
Chemical Properties ◽  
Engine Performance ◽  
National Standards ◽  
Oxides Of Nitrogen ◽  
Gasoline Engines ◽  
Physical Chemical ◽  
Methyl Levulinate ◽  
Performance And Emissions ◽  
Gum Content ◽  
Blended Fuels

Addition of 10 vol% biomass-based methyl levulinate (ML), ethyl levulinate (EL), butyl levulinate (BL), gamma-valerolactone (GVL), dimethyl carbonate (DimC), and diethyl carbonate (DieC) in gasoline were selected as blended fuels. Physical-chemical properties of six different blends of biofuels and gasoline, including miscibility, octane number, distillation, vapor pressure, unwashed gum content, solvent washed gum content, copper corrosiveness, water content, mechanical admixtures, and lower heating value was evaluated according to the China National Standards. Blended fuels were then evaluated on the performance and emissions of a gasoline test engine without any modification. The results showed that all biomass-based fuels at 10 vol% have good miscibility in gasoline at temperatures of –30 to 30 °C. Experiments were performed at 4500 rpm engine speed at different engine loads (from 10% to 100% in 10% intervals). Results showed slightly lower engine power at different loads with the blended fuels than those from gasoline fuelled engine. However, the brake specific fuel consumption (BSFC) with the blended fuels was slightly higher than that from gasoline. Emission of carbon monoxide (CO), total unburned hydrocarbon (THC) and oxides of nitrogen (NOx) was reduced significantly from the blended fuels compared to gasoline while carbon dioxide (CO2) emission was slightly higher than that from gasoline. The data suggests that 10 vol% addition of biomass-based levulinates and carbonates fuels to gasoline is suitable for use in gasoline engines.

scholarly journals Improving Diesel Engine Efficiency and Emissions Using Fuel Additives

2018 ◽  
Vol 11 (2) ◽  
pp. 74-78
Author(s):  
Obed M. Ali ◽  
Fattah H. Hasan ◽  
Abid Z. Khalaf
Keyword(s):  
Diesel Engine ◽  
Diethyl Ether ◽  
Cetane Number ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Fuel Additive ◽  
Fuel Quality ◽  
Important Indicator ◽  
Engine Efficiency ◽  
Study Results

Diesel engine is widely used in the different applications of the modern life. Diesel fuel quality is an important indicator of the engine efficiency and exhaust emissions. However, the low cetane number of the commercial diesel resulting from improper refining processes lead to significant reduction in the engine efficiency. Hence, the aim of this study is to use diethyl ether to improve the fuel quality for better engine performance at lower engine emissions. Diethyl ether has been used at 5% percentage with commercial diesel, and the cetane number of the fuel was measured. Engine test was conducted at increasing speed to evaluate the engine performance and emissions. The study results show an improvement in the fuel cetane number from 49 to 51 with 5% diethyl ether. Furthermore, significant increase in engine power by about 10% has been recorded for the whole engine speed with slightly lower specific fuel consumption at low and medium engine speeds. Moreover, noticeable reduction in NOx emissions and CO emissions has been observed compared to commercial diesel. Therefore, it can be concluded that the utilization of diethyl ether as a fuel additive with commercial diesel can be considered for improving engine efficiency and control exhaust emissions.

scholarly journals The effect of triacetin as a fuel additive to waste cooking biodiesel on engine performance and exhaust emissions

Fuel ◽  
2016 ◽  
Vol 182 ◽  
pp. 640-649 ◽  
Author(s):  
Ali Zare ◽  
Md Nurun Nabi ◽  
Timothy A. Bodisco ◽  
Farhad M. Hossain ◽  
M.M. Rahman ◽  
...  
Keyword(s):  
Engine Performance ◽  
Exhaust Emissions ◽  
Fuel Additive
Sign in / Sign up

Export Citation Format

Share Document