Effectiveness of exponential heat source, nanoparticle shape factor and Hall current on mixed convective flow of nanoliquids subject to rotating frame

2019 ◽  
Vol 15 (4) ◽  
pp. 758-778 ◽  
Author(s):  
B. Mahanthesh ◽  
Amala S. ◽  
Gireesha B.J. ◽  
I.L. Animasaun
Keyword(s):  
Heat Transfer ◽  
Heat Source ◽  
Chemical Reaction ◽  
Shape Factor ◽  
Hall Current ◽  
Flowing Fluid ◽  
Content Type ◽  
Laplace Transform Technique ◽  
The Impact ◽  
Rotating Plate

Purpose The study of novel exponential heat source (EHS) phenomena across a flowing fluid with the suspension of nanoparticles over a rotating plate in the presence of Hall current and chemical reaction has been an open question. Therefore, the purpose of this paper is to investigate the impact of EHS in the transport of nanofluid under the influence of strong magnetic dipole (Hall effect), chemical reaction and temperature-dependent heat source (THS) effects. The Khanafer-Vafai-Lightstone model is used for nanofluid and the thermophysical properties of nanofluid are calculated from mixture theory and phenomenological laws. The simulation of the flow is also carried out using the appropriate values of the empirical shape factor for five different particle shapes (i.e. sphere, hexahedron, tetrahedron, column and lamina). Design/methodology/approach Using Laplace transform technique, exact solutions are presented for the governing nonlinear equations. Graphical illustrations are pointed out to represent the impact of involved parameters in a comprehensive way. The numeric data of the density, thermal conductivity, dynamic viscosity, specific heat, Prandtl number and Nusselt number for 20 different nanofluids are presented. Findings It is established that the nanofluid enhances the heat transfer rate of the working fluids; the nanoparticles also cause an increase of viscous. The impact of EHS advances the heat transfer characteristics significantly than usual thermal-based heat source (THS). Originality/value The effectiveness of EHS phenomena in the dynamics of nanofluid over a rotating plate with Hall current, chemical reaction and THS effects is first time investigated.

MoS2-SiO2/EG hybrid nanofluid transport in a rotating channel under the influence of a strong magnetic dipole (Hall effect)

2020 ◽  
Vol 16 (6) ◽  
pp. 1595-1616
Author(s):  
N. Mahato ◽  
S.M. Banerjee ◽  
R.N. Jana ◽  
S. Das
Keyword(s):  
Heat Transfer ◽  
Ethylene Glycol ◽  
Shape Factor ◽  
Hall Current ◽  
Hybrid Nanofluid ◽  
Shear Stresses ◽  
Content Type ◽  
Nanoparticle Shape ◽  
Hall Parameter ◽  
Rotating Channel

PurposeThe article focuses on the magnetohydrodynamic (MHD) convective flow of MoS2-SiO2 /ethylene glycol (EG) hybrid nanofluid. The effectiveness of Hall current, periodically heating wall and shape factor of nanoparticles on the magnetized flow of hybrid nanocomposite molybdenum disulfide- silicon dioxide (MoS2-SiO2) suspended in ethylene glycol (EG) in a vertical rotating channel under the influence of strong magnetic dipole (Hall effect) and thermal radiation is assessed. One of the channel walls has an oscillatory temperature gradient. Four different shapes (i.e. brick, cylinder, platelet and blade) of nanoparticles disseminated in base fluid (EG) are considered for simulation of the flow.Design/methodology/approachThe analytical solution of governing equations has been presented. Influences of emerging physical parameters on the velocity and temperature profiles, the shear stresses and the rate of heat transfer are pointed out and discussed via graphs and tables.FindingsThe analysis revealed that Hall parameter has suppressing behavior on the velocity profiles within the rotating channel. The impact of nanoparticle shape factor advances the temperature characteristics significantly in the rotating channel. Brick-shape nanoparticles put up relatively low-temperature distribution in the rotating channel. The Hall parameter reduces the amplitudes of the shear stresses at the channel wall. However, the radiation parameter enhances the amplitude of the rate of heat transfer at the channel wall.Social implicationsThe important technical advantage of hybrid composition of nanoparticles as a drug carrier is its stability, high thermal conductivity, high load carrying capacity, etc. The proposed model may be beneficial in biomedical engineering, automobile parts, mineral and cleaning oils manufacturing, rubber and plastic industries.Originality/valueTo the best of our knowledge, there is little or no report on the aspects of assessment of the effectiveness of Hall current and nanoparticle shape factor on an MHD flow and heat transfer of an electrically conducting MoS2-SiO2/EG ethylene glycol-based hybrid nanofluid confined in a vertical channel with periodically varying wall temperature subject to a rotating frame. The present work furnishes a robust benchmark for the dynamics of nanofluids.

Numerical analysis of magneto-natural convection and thermal radiation of SWCNT nanofluid inside T-inverted shaped corrugated cavity containing porous medium

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mohamed Dhia Massoudi ◽  
Mohamed Bechir Ben Hamida ◽  
Mohammed A. Almeshaal ◽  
Yahya Ali Rothan ◽  
Khalil Hajlaoui
Keyword(s):  
Heat Transfer ◽  
Porous Media ◽  
Heat Source ◽  
Free Convection ◽  
Thermal Radiation ◽  
Convection And Heat Transfer ◽  
Content Type ◽  
Uniform Heat ◽  
Source Sink ◽  
The Impact

Purpose The purpose of this paper is to examine numerically the magnetohydrodynamic (MHD) free convection and thermal radiation heat transfer of single walled carbon nanotubes-water nanofluid within T-inverted shaped corrugated cavity comprising porous media including uniform heat source/sink for solar energy power plants applications. Design/methodology/approach The two-dimensional numerical simulation is performed by drawing on Comsol Multiphysics program, based on the finite element process. Findings The important results obtained show that increasing numbers of Rayleigh and Darcy and the parameter of radiation enhance the flow of convection heat. Furthermore, by increasing the corrugation height, the convection flow increases, but it decreases with the multiplication of the corrugation height. The use of a flat cavity provides better output than a corrugated cavity. Originality/value The role of surface corrugation parameters on the efficiency of free convection and heat transfer of thermal radiation within the porous media containing the T-inverted corrugated cavity including uniform heat source/sink under the impact of Lorentz forces has never been explored. A contrast is also established between a flat cavity and a corrugated one.

Heat transport of nano-micropolar fluid with an exponential heat source on a convectively heated elongated plate using numerical computation

2020 ◽  
Vol 16 (5) ◽  
pp. 1295-1312 ◽  
Author(s):  
P.K. Pattnaik ◽  
S.R. Mishra ◽  
B. Mahanthesh ◽  
B.J. Gireesha ◽  
Mohammad Rahimi-Gorji
Keyword(s):  
Heat Source ◽  
Magnetic Dipole ◽  
Joule Heating ◽  
Micropolar Fluid ◽  
Viscous Heating ◽  
Convective Condition ◽  
Flowing Fluid ◽  
Content Type ◽  
Flow Phenomena ◽  
The Impact

PurposeThe study of novel exponential heat source phenomena across a flowing fluid with a suspension of microparticles and nanoparticles towards a convectively heated plate has been an open question. Therefore, the impact of the exponential heat source in the transport of nano micropolar fluid in the existence of magnetic dipole, Joule heating, viscous heating and convective condition effects has been analytically investigated. Influence of chemical reaction has also been exhibited in this discussion.Design/methodology/approachThe leading equations are constructed via conservation equations of transport, micro-rotation, energy and solute under the non-transient state situation. Suitable stretching transformations are used to transform the system of partial differential equations to ordinary. The transformed ODEs admit numerical solution via Runge–Kutta fourth order method along with shooting technique.FindingsThe effects of pertinent physical parameters characterizing the flow phenomena are presented through graphs and discussed. The inclusion of microparticles and nanoparticles greatly affects the flow phenomena. The impact of the exponential heat source (EHS) advances the heat transfer characteristics significantly compared to usual thermal-based heat source (THS). The thermal performance can be improved through the effects of a magnetic dipole, viscous heating, Joule heating and convective condition.Originality/valueThe effectiveness of EHS phenomena in the dynamics of nano micropolar fluid past an elongated plate which is convectively heated with regression analysis is for the first time investigated.

scholarly journals Perturbation analysis of thermophoresis, hall current and heat source on flow dissipative aligned convective flow about an inclined plate

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
G. Dharmaiah ◽  
O.D. Makinde ◽  
K.S. Balamurugan
Keyword(s):  
Mass Transfer ◽  
Heat Source ◽  
Skin Friction ◽  
Chemical Reaction ◽  
Magnetic Parameter ◽  
Hall Current ◽  
Perturbation Technique ◽  
Heated Plate ◽  
Inclined Plate ◽  
The Impact

This present examination researches the impacts of thermophoresis, heat source and Hall current on dissipative adjusted MHD joint convection stream about an inclined plate inserted in a permeable medium. Utilizing dimensionless variables, the system of partial differential equations is changed into dimensionless equations. By making use of perturbation technique, estimated solutions for velocity, temperature, concentration profiles, skin friction, rate of heat transfer and rate of mass transfer have been determined. The attained results are explained with an assistance of diagrams to examine the impact of distinct parameters such as Magnetic parameter (M), Aligned magnetic parameter (ξ), Schmidt number (Sc), Eckert number (Ec), inclined angle (α), Prandtl number (Pr), heat generation parameter (Q), and chemical reaction (Kr), assuming two cases viz. Case I: Gr < 0, Gm < 0 (flow on heated plate); Case II: when Gr > 0, Gm > 0(flow on cooled plate). Additionally, the impacts of the appropriate parameters on the skin-friction coefficient and rates of heat and mass transfer are numerically furnished in tabular form. Skin friction coefficients are firmly diminished as magnetic field rises. Sherwood and Nusselt numbers boost up as enhance in chemical reaction.

Theoretical analysis of entropy generation in second grade nanofluid considering heat source/sink over a rotating disk

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Muhammad Faisal Javed ◽  
Mohammed Jameel ◽  
Muhammad Ijaz Khan ◽  
Sumaira Qayyum ◽  
Niaz B. Khan ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Heat Source ◽  
Chemical Reaction ◽  
Nonlinear Partial Differential Equations ◽  
Rotating Disk ◽  
Second Grade ◽  
Surface Drag ◽  
Viscoelastic Parameter ◽  
Content Type ◽  
Source Sink

Purpose This study aims to focus on second grade fluid flow over a rotating disk in the presence of chemical reaction. Uniform magnetic field is also taken into account. Because of the smaller magnetic Reynolds number, induced magnetic field is negligible. Heat equation is constructed by considering heat source/sink. Design/methodology/approach Suitable variables are used to transform nonlinear partial differential equations to ordinary ones. Convergent series solutions are attained by applying homotopy analysis method. Findings Trends of different parameters on concentration, velocity and temperature are shown graphically. Skin friction coefficient and local Nusselt number are calculated and investigated under the effect of elaborated parameters. An elevation in the value of magnetic field parameter causes collapse in the velocity distributions. Velocity distribution in increasing function of viscoelastic parameter. Temperature and concentration profiles are decreasing functions of viscoelastic parameter. Concentration distribution reduces by increasing the chemical reaction parameter. There is more surface drag force for larger M, while opposite behavior is noted for β. Originality/value To the best of the authors’ knowledge, such consideration is yet to be published in the literature.

MHD and nonlinear thermal radiation effects on hybrid nanofluid past a wedge with heat source and entropy generation

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Fazle Mabood ◽  
Anum Shafiq ◽  
Waqar Ahmed Khan ◽  
Irfan Anjum Badruddin
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Heat Source ◽  
Thermal Radiation ◽  
Entropy Generation ◽  
Entropy Generation Rate ◽  
Design Parameters ◽  
Hybrid Nanofluid ◽  
Nonlinear Thermal Radiation ◽  
Content Type

Purpose This study aims to investigate the irreversibility associated with the Fe3O4–Co/kerosene hybrid-nanofluid past a wedge with nonlinear radiation and heat source. Design/methodology/approach This study reports the numerical analysis of the hybrid nanofluid model under the implications of the heat source and magnetic field over a static and moving wedge with slips. The second law of thermodynamics is applied with nonlinear thermal radiation. The system that comprises differential equations of partial derivatives is remodeled into the system of differential equations via similarity transformations and then solved through the Runge–Kutta–Fehlberg with shooting technique. The physical parameters, which emerges from the derived system, are discussed in graphical formats. Excellent proficiency in the numerical process is analyzed by comparing the results with available literature in limiting scenarios. Findings The significant outcomes of the current investigation are that the velocity field uplifts for higher velocity slip and magnetic strength. Further, the heat transfer rate is reduced with the incremental values of the Eckert number, while it uplifts with thermal slip and radiation parameters. An increase in Brinkmann’s number uplifts the entropy generation rate, while that peters out the Bejan number. The results of this study are of importance involving in the assessment of the effect of some important design parameters on heat transfer and, consequently, on the optimization of industrial processes. Originality/value This study is original work that reports the hybrid nanofluid model of Fe3O4–Co/kerosene.

Effect of non-uniform heat source/sink on MHD boundary layer flow and melting heat transfer of Williamson nanofluid in porous medium

2019 ◽  
Vol 15 (2) ◽  
pp. 452-472 ◽  
Author(s):  
Jayarami Reddy Konda ◽  
Madhusudhana Reddy N.P. ◽  
Ramakrishna Konijeti ◽  
Abhishek Dasore
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Heat Source ◽  
Radiation Effects ◽  
Navier Stokes ◽  
Working Fluid ◽  
Content Type ◽  
Linear Ordinary Differential Equations ◽  
Uniform Heat ◽  
Source Sink

PurposeThe purpose of this paper is to examine the influence of magnetic field on Williamson nanofluid embedded in a porous medium in the presence of non-uniform heat source/sink, chemical reaction and thermal radiation effects.Design/methodology/approachThe governing physical problem is presented using the traditional Navier–Stokes theory. Consequential system of equations is transformed into a set of non-linear ordinary differential equations by means of scaling group of transformation, which are solved using the Runge–Kutta–Fehlberg method.FindingsThe working fluid is examined for several sundry parameters graphically and in a tabular form. It is noticed that with an increase in Eckert number, there is an increase in velocity and temperature along with a decrease in shear stress and heat transfer rate.Originality/valueA good agreement of the present results has been observed by comparing with the existing literature results.

Stability analysis on the stagnation-point flow and heat transfer over a permeable stretching/shrinking sheet with heat source effect

2018 ◽  
Vol 28 (11) ◽  
pp. 2650-2663 ◽  
Author(s):  
Fatinnabila Kamal ◽  
Khairy Zaimi ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Stability Analysis ◽  
Heat Source ◽  
Skin Friction ◽  
Stagnation Point ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Content Type ◽  
Source Effect ◽  
Flow And Heat Transfer

PurposeThis paper aims to analyze the behavior of the stagnation-point flow and heat transfer over a permeable stretching/shrinking sheet in the presence of the viscous dissipation and heat source effects.Design/methodology/approachThe governing partial differential equations are converted into ordinary differential equations by similarity transformations before being solved numerically using the bvp4c function built in Matlab software. Effects of suction/injection parameter and heat source parameter on the skin friction and heat transfer coefficients as well as the velocity and temperature profiles are presented in the forms of tables and graphs. A temporal stability analysis will be conducted to verify which solution is stable for the dual solutions exist for the shrinking case.FindingsThe analysis indicates that the skin friction coefficient and the local Nusselt number as well as the velocity and temperature were influenced by suction/injection parameter. In contrast, only the local Nusselt number, which represents heat transfer rate at the surface, was affected by heat source effect. Further, numerical results showed that dual solutions were found to exist for the certain range of shrinking case. Then, the stability analysis is performed, and it is confirmed that the first solution is linearly stable and has real physical implication, while the second solution is not.Practical implicationsIn practice, the study of the steady two-dimensional stagnation-point flow and heat transfer past a permeable stretching/shrinking sheet in the presence of heat source effect is very crucial and useful. The problems involving fluid flow over stretching or shrinking surfaces can be found in many industrial manufacturing processes such as hot rolling, paper production and spinning of fibers. Owing to the numerous applications, the study of stretching/shrinking sheet was subsequently extended by many authors to explore various aspects of skin friction coefficient and heat transfer in a fluid. Besides that, the study of suction/injection on the boundary layer flow also has important applications in the field of aerodynamics and space science.Originality/valueAlthough many studies on viscous fluid has been investigated, there is still limited discoveries found on the heat source and suction/injection effects. Indeed, this paper managed to obtain the second (dual) solutions and stability analysis is performed. The authors believe that all the results are original and have not been published elsewhere.

Exploration of activation energy and binary chemical reaction effects on nano Casson fluid flow with thermal and exponential space-based heat source

2019 ◽  
Vol 15 (1) ◽  
pp. 227-245 ◽  
Author(s):  
Gireesha B.J. ◽  
M. Archana ◽  
B. Mahanthesh ◽  
Prasannakumara B.C.
Keyword(s):  
Activation Energy ◽  
Heat Source ◽  
Chemical Reaction ◽  
Radiative Heat ◽  
Physical Parameters ◽  
Content Type ◽  
Heat Process ◽  
Flow Past ◽  
Non Linear ◽  
Exponential Space

PurposeThe purpose of this paper is to explore the effects of binary chemical reaction and activation energy on nano Casson liquid flow past a stretched plate with non-linear radiative heat, and also, the effect of a novel exponential space-dependent heat source (ESHS) aspect along with thermal-dependent heat source (THS) effect in the analysis of heat transfer in nanofluid. Comparative analysis is carried out between the flows with linear radiative heat process and non-linear radiative heat process.Design/methodology/approachA similarity transformation technique is utilised to access the ODEs from the governed PDEs. The manipulation of subsequent non-linear equations is carried out by a well-known numerical approach called Runge–Kutta–Fehlberg scheme. Obtained solutions are briefly discussed with the help of graphical and tabular illustrations.FindingsThe effects of various physical parameters on temperature, nanoparticles volume fraction and velocity fields within the boundary layer are discussed for two different flow situations, namely, flow with linear radiative heat and flow with non-linear radiative heat. It is found that an irregular heat source/sink (ESHS and THS) and non-linear solar radiation play a vital role in the enhancement of the temperature distributions.Originality/valueThe problem is relatively original to study the effects of activation energy and binary chemical reaction along with a novel exponential space-based heat source on laminar boundary flow past a stretched plate in the presence of non-linear Rosseland radiative heat.

scholarly journals Effect of Heat Source Position in Fluid Flow, Heat Transfer and Entropy Generation in a Naturally Ventilated Room

Mathematics ◽  
2022 ◽  
Vol 10 (2) ◽  
pp. 178
Author(s):  
Mohammed Alghaseb ◽  
Walid Hassen ◽  
Abdelhakim Mesloub ◽  
Lioua Kolsi
Keyword(s):  
Heat Transfer ◽  
Rayleigh Number ◽  
Heat Source ◽  
Numerical Study ◽  
Temperature Fields ◽  
Left Wall ◽  
Heating Efficiency ◽  
Discrete Heat Source ◽  
Volume Method ◽  
The Impact

In this study, a 3D numerical study of free ventilated room equipped with a discrete heat source was performed using the Finite Volume Method (FVM). To ensure good ventilation, two parallel openings were created in the room. A suction opening was located at the bottom of the left wall and another opening was located at the top of the opposite wall; the heat source was placed at various positions in order to compare the heating efficiency. The effects of Rayleigh number (103 ≤ Ra ≤ 106) for six heater positions was studied. The results focus on the impact of these parameters on the particle trajectories, temperature fields and on the heat transfer inside the room. It was found that the position of the heater has a dramatic effect on the behavior and topography of the flow in the room. When the heat source was placed on the wall with the suction opening, two antagonistic behaviors were recorded: an improvement in heat transfer of about 31.6%, compared to the other positions, and a low Rayleigh number against 22% attenuation for high Ra values was noted.

Sign in / Sign up

Export Citation Format

Share Document