A multi-DOF rotary 3D printer: machine design, performance analysis and process planning of curved layer fused deposition modeling (CLFDM)

2020 ◽  
Vol 26 (6) ◽  
pp. 1079-1093
Author(s):  
Donghua Zhao ◽  
Tianqi Li ◽  
Beijun Shen ◽  
Yicheng Jiang ◽  
Weizhong Guo ◽  
...  
Keyword(s):  
Process Planning ◽  
Fused Deposition Modeling ◽  
Machine Design ◽  
3D Printer ◽  
Curved Surfaces ◽  
Content Type ◽  
Fused Deposition ◽  
Flat Layer ◽  
Deposition Modeling ◽  
Technical Challenges

Purpose The purpose of this paper is to design and develop a rotary three-dimensional (3D) printer for curved layer fused deposition modeling (CLFDM), and discuss some technical challenges in the development. Design/methodology/approach Some technical challenges include, but are not limited to, the machine design and control system, motion analysis and simulation, workspace and printing process analysis, curved layer slicing and tool path planning. Moreover, preliminary experiments are carried out to prove the feasibility of the design. Findings A rotary 3D printer for CLFDM has been designed and developed. Moreover, this printer can function as a polar 3D printer for flat layer additive manufacturing (AM). Compared with flat layer AM, CLFDM weakens the staircase effect and improves geometrical accuracy and mechanical properties. Hence, CLFDM is more suitable for parts with curved surfaces. Research limitations/implications Double extruders have brought improved build speed. However, this paper is restricted to complex process planning and mechanical structures, which may lead to collisions during printing. Meanwhile, the rotation range of the nozzle is limited by mechanical structures, affecting the manufacturing capability of complex curved surfaces. Originality/value A novel rotary 3D printer, which has four degrees of freedom and double extruders, has been designed and manufactured. The investigation on the prototype has proved its capability of CLFDM. Besides, this rotary 3D printer has two working modes, which brings the possibility of flat layer AM and CLFDM.

Improved accuracy of an FDM 3D printer using a face-diagonal length test using an artifact and a Vernier caliper

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Seung-Han Yang ◽  
Kwang-Il Lee
Keyword(s):  
Fused Deposition Modeling ◽  
3D Printer ◽  
Geometric Errors ◽  
Content Type ◽  
Fused Deposition ◽  
Model Based ◽  
The Face ◽  
Deposition Modeling ◽  
Measuring Machine ◽  
Diagonal Length

Purpose The purpose of this study is to improve the accuracy of a fused deposition modeling three-dimensional (3D) printer by identifying and compensating for position-independent geometric errors using a face-diagonal length test featuring a designed artifact and a Vernier caliper. Design/methodology/approach An artifact that does not require support when printing was designed and printed to allow performance of the face-diagonal length test. A Vernier caliper was used to measure the lengths of diagonals in the XY, YZ and ZX planes of the printed artifact specimen; this completed the face-diagonal length test. The relationships between position-independent geometric errors of the linear axes X, Y and Z and the measured diagonal lengths of the three planes were determined to identify geometric errors. Findings The approach was applied to a commercial fused deposition modeling 3D printer, and three position-independent geometric errors were rapidly identified. The artifact was re-printed after model-based compensation for these errors and the diagonal lengths were re-measured. The results were verified via coordinate measuring machine measurement of a simple test piece without and with model-based compensation for identified geometric errors. Furthermore, the proposed approach was applied to a commercial 3D printer. Research limitations/implications The measured diagonal lengths of the printed artifacts varied greatly. Thus, further studies should investigate the effects of printing materials and parameters on the length discrepancies of 3D printed artifacts. Practical implications A software-based compensation of identified position-independent geometric errors has to be used at commercial 3D printers for accuracy improvements of printed parts. Originality/value Thus, the approach is of practical utility; it can be periodically used to identify position-independent geometric errors and ensure that the 3D printer is consistently accurate.

The development of a conical screw-based extrusion deposition system and its application in fused deposition modeling with thermoplastic polyurethane

2019 ◽  
Vol 26 (2) ◽  
pp. 409-417 ◽  
Author(s):  
Jie Leng ◽  
Junjie Wu ◽  
Ning Chen ◽  
Xiang Xu ◽  
Jie Zhang
Keyword(s):  
Tensile Properties ◽  
Fused Deposition Modeling ◽  
Raw Materials ◽  
Thermoplastic Polyurethane ◽  
Soft Materials ◽  
Processing Parameters ◽  
3D Printer ◽  
Content Type ◽  
Fused Deposition ◽  
Deposition Modeling

Purpose This paper aims to develop an integrated and portable desktop 3D printer using direct extruding technology to expand applied material field. Different from conventional fused deposition modeling (FDM) which uses polymer filaments as feedstock, the developed system can fabricate products directly using polymer pellets. And its printing properties are also investigated. Design/methodology/approach A conical screw-based extrusion deposition (CSBED) system was developed with a large taper conical screw to plasticize and extrude fed materials. The 3D printer was developed with assistance of precision positioning and controlling system. Biocompatible thermoplastic polyurethane (TPU) pellets were selected as raw materials for experiments. The influences of four processing parameters: nozzle temperature, fill vector orientation, layer thickness and infill density on the product’s internal structure and tensile properties were investigated. Findings It is concluded that the customized system has a high manufacturing accuracy with a diminutive global size and is suitable for printing soft materials such as TPU. Theoretical calculation shows the developed conical screw is more effective in plasticizing and extruding compared with conventional screw. Printed samples can achieve applicable tensile properties under harmonious parameter cooperation. Deposited materials are found to have voids among adjacent roads under unbefitting parameters. Originality/value The developed system efficiently improves material limitations compared to commercial FDM systems and exhibits great potential in medical field because soft materials such as biocompatible TPU pellets can be directly used.

Synthesis and properties of modified PBT for FDM

2017 ◽  
Vol 23 (4) ◽  
pp. 804-810 ◽  
Author(s):  
Shiqing Cao ◽  
Dandan Yu ◽  
Weilan Xue ◽  
Zuoxiang Zeng ◽  
Wanyu Zhu
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Fused Deposition Modeling ◽  
Complex Structure ◽  
Three Dimensional ◽  
Sebacic Acid ◽  
Wire Drawing ◽  
Content Type ◽  
Fused Deposition ◽  
Deposition Modeling

Purpose The purpose of this paper is to prepare a new modified polybutylene terephalate (MPBT) for fused deposition modeling (FDM) to increase the variety of materials compatible with printing. And the printing materials can be used to print components with a complex structure and functional mechanical parts. Design/methodology/approach The MPBT, poly(butylene terephalate-co-isophthalate-co-sebacate) (PBTIS), was prepared for FDM by direct esterification and subsequent polycondensation using terephthalic acid (PTA), isophthalic acid (PIA), sebacic acid (SA) and 1,4-butanediol (BDO). The effects of the content of PIA (20-40 mol%) on the mechanical properties of PBTIS were investigated when the mole per cent of SA (αSA) is zero. The effects of αSA (0-7mol%) on the thermal, rheological and mechanical properties of PBTIS were investigated at nPTA/nPIA = 7/3. A desktop wire drawing and extruding machine was used to fabricate the filaments, whose printability and anisotropy were tested by three-dimensional (3D) printing experiments. Findings A candidate content of PIA introducing into PBT was obtained to be about 30 per cent, and the Izod notched impact strength of PBTIS increased with the increase of αSA. The results showed that the PBTIS (nPTA/nPIA = 7/3, αSA = 3-5mol%) is suitable for FDM. Originality/value New printing materials with good Izod notched impact strength were obtained by introducing PIA and SA (nPTA/nPIA = 7/3, αSA = 3-5 mol%) into PBT and their anisotropy are better than that of ABS.

Fracture assessment of polycarbonate parts produced by fused deposition modeling in the out-of-plane printing direction – effect of raster angle

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Iman Sedighi ◽  
Majid R. Ayatollahi ◽  
Bahador Bahrami ◽  
Marco A. Pérez-Martínez ◽  
Andrés A. Garcia-Granada
Keyword(s):  
Fracture Toughness ◽  
Finite Element ◽  
Fracture Behavior ◽  
Fused Deposition Modeling ◽  
Mode I ◽  
Content Type ◽  
Fused Deposition ◽  
Out Of Plane ◽  
Deposition Modeling ◽  
Fracture Tests

Purpose The purpose of this paper is to study the Mode I fracture behavior of polycarbonate (PC) parts produced using fused deposition modeling (FDM). The focus of this study is on samples printed along the out-of-plane direction with different raster angles. Design/methodology/approach Tensile and Mode I fracture tests were conducted. Semi-circular bend specimens were used for the fracture tests, which were printed in four different raster patterns of (0/90), (15/−75) (30/−60) and (45/−45). Moreover, the finite element method (FEM) was used to determine the applicability of linear elastic fracture mechanics (LEFM) for the printed PC parts. The fracture toughness results, as well as the fracture path and the fracture surfaces, were studied to describe the fracture behavior of the samples. Findings Finite element results confirm that the use of LEFM is allowed for the tested PC samples. The fracture toughness results show that changing the direction of the printed rasters can have an effect of up to 50% on the fracture toughness of the printed parts, with the (+45/−45) and (0/90) orientations having the highest and lowest resistance to crack propagation, respectively. Moreover, except for the (0/90) orientation, the other samples have higher crack resistance compared to the bulk material. The fracture toughness of the tested PC depends more on the toughness of the printed sample, rather than its tensile strength. Originality/value The toughness and the energy absorption capability of the printed samples (with different raster patterns) were identified as the main properties affecting the fracture toughness of the AM PC parts. Because the fracture resistance of almost all the samples was higher than that of the base material, it is evident that by choosing the right raster patterns for 3D-printed parts, very high resistance to crack growth may be obtained. Also, using FEM and comparing the size of the plastic zones, it was concluded that, although the tensile curves show nonlinearity, LEFM is still applicable for the printed parts.

Multi-objective optimization approach in design for additive manufacturing for fused deposition modeling

2019 ◽  
Vol 25 (5) ◽  
pp. 875-887
Author(s):  
Elnaz Asadollahi-Yazdi ◽  
Julien Gardan ◽  
Pascal Lafon
Keyword(s):  
Optimization Problem ◽  
Fused Deposition Modeling ◽  
Topological Optimization ◽  
Design For Additive Manufacturing ◽  
Multi Objective Optimization ◽  
Content Type ◽  
Fused Deposition ◽  
Design And Manufacturing ◽  
Deposition Modeling ◽  
Manufacturing Parameters

Purpose This paper aims to provide a multi-objective optimization problem in design for manufacturing (DFM) approach for fused deposition modeling (FDM). This method considers the manufacturing criteria and constraints during the design by selecting the best manufacturing parameters to guide the designer and manufacturer in fabrication with FDM. Design/methodology/approach Topological optimization and bi-objective optimization problems are suggested to complete the DFM approach for design for additive manufacturing (DFAM) to define a product. Topological optimization allows the shape improvement of the product through a material distribution for weight gain based on the desired mechanical behavior. The bi-objective optimization problem plays an important role to evaluate the manufacturability by quantification and optimization of the manufacturing criteria and constraint simultaneously. Actually, it optimizes the production time, required material regarding surface quality and mechanical properties of the product because of two significant parameters as layer thickness and part orientation. Findings A comprehensive analysis of the existing DFAM approaches illustrates that these approaches are not developed sufficiently in terms of manufacturability evaluation in quantification and optimization levels. There is no approach that investigates the AM criteria and constraints simultaneously. It is necessary to provide a decision-making tool for the designers and manufacturers to lead to better design and manufacturing regarding the different AM characteristics. Practical implications To assess the efficiency of this approach, a wheel spindle is considered as a case study which shows how this method is capable to find the best design and manufacturing solutions. Originality/value A multi-criteria decision-making approach as the main contribution is developed to analyze FDM technology and its attributes, criteria and drawbacks. It completes the DFAM approach for FDM through a bi-objective optimization problem which deals with finding the best manufacturing parameters by optimizing production time and material mass because of the product mechanical properties and surface roughness.

The influence of load direction, microstructure, raster orientation on the quasi-static response of fused deposition modeling ABS

2019 ◽  
Vol 25 (3) ◽  
pp. 462-472 ◽  
Author(s):  
Oluwakayode Bamiduro ◽  
Gbadebo Owolabi ◽  
Mulugeta A. Haile ◽  
Jaret C. Riddick
Keyword(s):  
Additive Manufacturing ◽  
Fused Deposition Modeling ◽  
Mechanical Response ◽  
Mechanical Performance ◽  
Bead Geometry ◽  
Static Response ◽  
Load Direction ◽  
Content Type ◽  
Fused Deposition ◽  
Deposition Modeling

Purpose The continual growth of additive manufacturing has increased tremendously because of its versatility, flexibility and high customization of geometric structures. However, design hurdles are presented in understanding the relationship between the fabrication process and materials microstructure as it relates to the mechanical performance. The purpose of this paper is to investigate the role of build architecture and microstructure and the effects of load direction on the static response and mechanical properties of acrylonitrile butadiene styrene (ABS) specimens obtained via the fused deposition modeling (FDM) processing technique. Design/methodology/approach Among additive manufacturing processes, FDM is a prolific technology for manufacturing ABS. The blend of ABS combines strength, rigidity and toughness, all of which are desirable for the production of structural materials in rapid manufacturing applications. However, reported literature has varied widely on the mechanical performance due to the proprietary nature of the ABS material ratio, ultimately creating a design hurdle. While prior experimental studies have studied the mechanical response via uniaxial tension testing, this study has aimed to understand the mechanical response of ABS from the materials’ microstructural point of view. First, ABS specimen was fabricated via FDM using a defined build architecture. Next, the specimens were mechanically tested until failure. Then finally, the failure structures were microstructurally investigated. In this paper, the effects of microstructural evolution on the static mechanical response of various build architecture of ABS aimed at FDM manufacturing technique was analyzed. Findings The results show that the rastering orientation of 0/90 exhibited the highest tensile strength followed by fracture at its maximum load. However, the “45” bead direction of the ABS fibers displayed a cold-drawing behavior before rupture. The morphology analyses before and after tensile failure were characterized by a scanning electron microscopy (SEM) which highlighted the effects of bead geometry (layers) and areas of stress concentration such as interstitial voids in the material during build, ultimately compromising the structural integrity of the specimens. Research limitations/implications The ability to control the constituents and microstructure of a material during fabrication is significant to improving and predicting the mechanical performance of structural additive manufacturing components. In this report, the effects of microstructure on the mechanical performance of FDM-fabricated ABS materials was discussed. Further investigations are planned in understanding the effects of ambient environmental conditions (such as moisture) on the ABS material pre- and post-fabrication. Originality/value The study provides valuable experimental data for the purpose of understanding the inter-dependency between build parameters and microstructure as it relates to the specimens exemplified strength. The results highlighted in this study are fundamental to the development of optimal design of strength and complex ultra-lightweight structure efficiency.

scholarly journals Dual Sacrificial Molding: Fabricating 3D Microchannels with Overhang and Helical Features

Micromachines ◽  
2018 ◽  
Vol 9 (10) ◽  
pp. 523 ◽  
Author(s):  
Wei Goh ◽  
Michinao Hashimoto
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Microfluidic Devices ◽  
High Impact ◽  
3D Printer ◽  
Original Design ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Indispensable Tool ◽  
Single Material

Fused deposition modeling (FDM) has become an indispensable tool for 3D printing of molds used for sacrificial molding to fabricate microfluidic devices. The freedom of design of a mold is, however, restricted to the capabilities of the 3D printer and associated materials. Although FDM has been used to create a sacrificial mold made with polyvinyl alcohol (PVA) to produce 3D microchannels, microchannels with free-hanging geometries are still difficult to achieve. Herein, dual sacrificial molding was devised to fabricate microchannels with overhang or helical features in PDMS using two complementary materials. The method uses an FDM 3D printer equipped with two extruders and filaments made of high- impact polystyrene (HIPS) and PVA. HIPS was initially removed in limonene to reveal the PVA mold harboring the design of microchannels. The PVA mold was embedded in PDMS and subsequently removed in water to create microchannels with 3D geometries such as dual helices and multilayer pyramidal networks. The complementary pairing of the HIPS and PVA filaments during printing facilitated the support of suspended features of the PVA mold. The PVA mold was robust and retained the original design after the exposure to limonene. The resilience of the technique demonstrated here allows us to create microchannels with geometries not attainable with sacrificial molding with a mold printed with a single material.

Simulation of edge quality in fused deposition modeling

2019 ◽  
Vol 25 (3) ◽  
pp. 541-554 ◽  
Author(s):  
Antonio Armillotta
Keyword(s):  
Fused Deposition Modeling ◽  
Experimental Tests ◽  
Geometric Errors ◽  
Content Type ◽  
Fused Deposition ◽  
Graphical Simulation ◽  
Deposition Modeling ◽  
Edge Quality ◽  
Input Variables

Purpose The purpose of this paper is to propose a method for simulating the profile of part edges as a result of the FDM process. Deviations from nominal edge shape are predicted as a function of the layer thickness and three characteristic angles depending on part geometry and build orientation. Design/methodology/approach Typical patterns of edge profiles were observed on sample FDM parts and interpreted as the effects of possible toolpath generation strategies. An algorithm was developed to generate edge profiles consistent with the patterns expected for any combination of input variables. Findings Experimental tests confirmed that the simulation procedure can correctly predict basic geometric properties of edge profiles such as frequency, amplitude and shape of periodic asperities. Research limitations/implications The algorithm takes into account only a subset of the error causes recognized in previous studies. Additional causes could be integrated in the simulation to improve the estimation of geometric errors. Practical implications Edge simulation may help avoid process choices that result in aesthetic and functional defects on FDM parts. Originality/value Compared to the statistical estimation of geometric errors, graphical simulation allows a more detailed characterization of edge quality and a better diagnosis of error causes.

Deposition-induced effects of isotactic polypropylene and polycarbonate composites during fused deposition modeling

2017 ◽  
Vol 23 (5) ◽  
pp. 869-880 ◽  
Author(s):  
Ying-Guo Zhou ◽  
Bei Su ◽  
Lih-sheng Turng
Keyword(s):  
Mechanical Properties ◽  
Design Methodology ◽  
Fused Deposition Modeling ◽  
Content Type ◽  
Fused Deposition ◽  
Close Relationship ◽  
Molded Parts ◽  
Deposition Modeling ◽  
Injection Molded ◽  
First Time

Purpose Although the feasibility and effectiveness of the fused deposition modeling (FDM) method have been proposed and developed, studies of applying this technology to various materials are still needed for researching its applicability, especially with regard to polymer blends and composites. The purpose of this paper is to study the deposition-induced effect and the effect of compatibilizers on the mechanical properties of polypropylene and polycarbonate (PP/PC) composites. Design/methodology/approach For this purpose, three different deposition modes for PP/PC composites with or without compatibilizers were used for the FDM method and tested for tensile properties. Also, parts with the same materials were made by injection molding and used for comparison. In addition, different deposition speeds were used to investigate the different deposition-induced effects. Furthermore, the behavior of the mechanical properties was clarified with scanning electron microscope images of the fracture surfaces. Findings The research results suggest that the deposition orientation has a significant influence on the mechanical behavior of PP/PC composite FDM parts. The results also indicate that there is a close relationship between the mechanical properties and morphological structures which are deeply influenced by compatibilization. Compared with injection molded parts, the ductility of the FDM parts can be dramatically improved due to the formation of fibrils and micro-fibrils by the deposition induced during processing. Originality/value This is the first paper to investigate a PP/PC composite FDM process. The results of this paper verified the applicability of PP/PC composites to FDM technology. It is also the first time that the deposition-induced effect during FDM has been investigated and studied.

scholarly journals Edge quality in fused deposition modeling: I. Definition and analysis

2017 ◽  
Vol 23 (6) ◽  
pp. 1079-1087 ◽  
Author(s):  
Antonio Armillotta ◽  
Marco Cavallaro
Keyword(s):  
Fused Deposition Modeling ◽  
Experimental Tests ◽  
Geometric Errors ◽  
Geometric Accuracy ◽  
Process Map ◽  
Content Type ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Geometric Variables ◽  
Physical Phenomena

Purpose The purpose of this paper is to discuss the problem of the geometric accuracy of edges in parts manufactured by the Fused Deposition Modeling process, as a preliminary step for an experimental investigation. Methodology/approach Three geometric variables (inclination, included and incidence angles) were defined for an edge. The influence of each variable on the geometric errors was explained with reference to specific causes related to physical phenomena and process constraints. Findings Occurrence conditions for all causes were determined and visualized in a process map, which was also developed into a software procedure for the diagnosis of quality issues on digital models of the parts. Research limitations/implications The process map was developed by only empirical considerations and does not allow to predict the amount of geometric errors. In the second part of the paper, experimental tests will help to extend and validate the prediction criteria. Practical implications As demonstrated by an example, the results allow to predict the occurrence of visible defects on the edges of a part before manufacturing it with a given build orientation. Originality/value In literature, the geometric accuracy of additively manufactured parts is only related to surface features. The paper shows that the quality of edges depends on additional variables and causes to be carefully controlled by process choices.

Sign in / Sign up

Export Citation Format

Share Document