Polarization dependence of multipath propagation and high-speed transmission characteristics of indoor millimeter-wave channel at 60 GHz

This paper discusses the stochastic and strategic control of 60 GHz millimeter-wave (mmWave) wireless transmission for distributed and mobile virtual reality (VR) applications. In VR scenarios, establishing wireless connection between VR data-center (called VR server (VRS)) and head-mounted VR device (called VRD) allows various mobile services. Consequently, utilizing wireless technologies is obviously beneficial in VR applications. In order to transmit massive VR data, the 60 GHz mmWave wireless technology is considered in this research. However, transmitting the maximum amount of data introduces maximum power consumption in transceivers. Therefore, this paper proposes a dynamic/adaptive algorithm that can control the power allocation in the 60 GHz mmWave transceivers. The proposed algorithm dynamically controls the power allocation in order to achieve time-average energy-efficiency for VR data transmission over 60 GHz mmWave channels while preserving queue stabilization. The simulation results show that the proposed algorithm presents desired performance.

Download Full-text

Simulation and Modeling of Millimeter-Wave Channel at 60 GHz in Indoor Environment for 5G Wireless Communication System

2018 IEEE International Conference on Computational Electromagnetics (ICCEM) ◽

10.1109/compem.2018.8496691 ◽

2018 ◽

Cited By ~ 5

Author(s):

Shuangde Li ◽

Yuanjian Liu ◽

Leke Lin ◽

Dingming Sun ◽

Shan Yang ◽

...

Keyword(s):

Wireless Communication ◽

Millimeter Wave ◽

Communication System ◽

Indoor Environment ◽

60 Ghz ◽

Simulation And Modeling ◽

Wireless Communication System ◽

Wave Channel

Download Full-text

A Cost-Effective High-Speed Radio over Fibre System for Millimeter Wave Applications

Journal of Optical Communications ◽

10.1515/joc-2017-0166 ◽

2020 ◽

Vol 41 (2) ◽

pp. 177-180

Author(s):

Abhishek Sharma ◽

Sushank Chaudhary ◽

Deepika Thakur ◽

Vigneswaran Dhasratan

Keyword(s):

Millimeter Wave ◽

Wavelength Division Multiplexing ◽

High Frequency ◽

High Speed ◽

Cost Effective ◽

Optical Fibres ◽

60 Ghz ◽

Wavelength Division ◽

Millimetre Waves ◽

Radio Over Fibre

AbstractsFuture 5 G networks can enhance their wireless capacity and speed by effectively using high-frequency millimetre waves. Radio over fibres (RoF) is the promising technology to deliver millimetre waves over optical fibres as it integrates radio domain with wireless domain. The current study employed cost-effective non-return to zero scheme to encode 10 Gbps – 60 GHz data and wavelength division multiplexing scheme to transmit four channels over 60 km optical fibre link.

Download Full-text

Physical layer simulation results for IEEE 802.15.3c with different channel models

Advances in Radio Science ◽

10.5194/ars-9-173-2011 ◽

2011 ◽

Vol 9 ◽

pp. 173-177 ◽

Cited By ~ 4

Author(s):

M. Liso Nicolás ◽

M. Jacob ◽

T. Kürner

Keyword(s):

Orthogonal Frequency Division Multiplexing ◽

High Speed ◽

Channel Model ◽

Multipath Propagation ◽

Signal To Noise Ratio ◽

Physical Layer ◽

Link Quality ◽

60 Ghz ◽

Single Carrier ◽

Ieee 802.15.3C

Abstract. This paper investigates the performance of the 60 GHz IEEE 802.15.3c physical layer (PHY) specification in terms of bit error rate (BER) against signal to noise ratio. Two PHY modes of the standard have been implemented and simulated, i.e., Single Carrier and High Speed Interface. The first mode uses single carrier (SC) block transmission and the second mode uses orthogonal frequency division multiplexing (OFDM). One of the main issues in the new 60 GHz standards is multipath propagation, which plays an important role in the link quality. Thus, we have tested the PHY with the IEEE standard channel model, ray tracing simulations and real 60 GHz measurements.

Download Full-text

High-Speed Millimeter-Wave Mobile Experimentation on Software-Defined Radios

GetMobile Mobile Computing and Communications ◽

10.1145/3457356.3457368 ◽

2021 ◽

Vol 24 (4) ◽

pp. 39-42

Author(s):

Jesus O. Lacruz ◽

Dolores Garcia ◽

Pablo Jimenez ◽

Joan Palacios ◽

Joerg Widmer

Keyword(s):

Signal Processing ◽

Millimeter Wave ◽

Mobile Networks ◽

High Speed ◽

Ease Of Use ◽

Time Signal ◽

60 Ghz ◽

Very High Frequency ◽

Open Platform ◽

Very High

Millimeter-wave (mm-Wave) communications have become an integral part of WLAN standards and 5G mobile networks and, as application data rate requirements increase, more and more traffic will move to these very high frequency bands. Although there is an ample choice of powerful experimental platforms for sub-6 GHz research, building mm-Wave systems is much more difficult due to the very high hardware requirements. To address the lack of suitable experimentation platforms, we propose mm-FLEX, a flexible and modular open platform with real-time signal processing capabilities that supports a bandwidth of 2 GHz and is compatible with current mm-Wave standards. The platform is built around a fast FPGA processor and a 60 GHz phased antenna array at front-end that can be reconfigured at nanosecond timescales. Together with its ease of use, this turns the platform into a unique tool for research on beam training in highly mobile scenarios and full-bandwidth mm-Wave signal processing.

Download Full-text

Digitally-Compensated Wideband 60 GHz Test-Bed for Power Amplifier Predistortion Experiments

Sensors ◽

10.3390/s21041473 ◽

2021 ◽

Vol 21 (4) ◽

pp. 1473

Author(s):

Martin Pospíšil ◽

Roman Maršálek ◽

Tomáš Götthans ◽

Tomáš Urbanec

Keyword(s):

Millimeter Wave ◽

Power Amplifier ◽

Communication Systems ◽

High Speed ◽

Direct Conversion ◽

Digital Predistortion ◽

60 Ghz ◽

Test Bed ◽

Front End ◽

Predistortion Linearization

Millimeter waves will play an important role in communication systems in the near future. On the one hand, the bandwidths available at millimeter-wave frequencies allow for elevated data rates, but on the other hand, the wide bandwidth accentuates the effects of wireless front-end impairments on transmitted waveforms and makes their compensation more difficult. Research into front-end impairment compensation in millimeter-wave frequency bands is currently being carried out, mainly using expensive laboratory setups consisting of universal signal generators, spectral analyzers and high-speed oscilloscopes. This paper presents a detailed description of an in-house built MATLAB-controlled 60 GHz measurement test-bed developed using relatively inexpensive hardware components that are available on the market and equipped with digital compensation for the most critical front-end impairments, including the digital predistortion of the power amplifier. It also demonstrates the potential of digital predistortion linearization on two distinct 60 GHz power amplifiers: one integrated in a direct-conversion transceiver and an external one with 24 dBm output power.

Download Full-text