scholarly journals Physical layer simulation results for IEEE 802.15.3c with different channel models

2011 ◽  
Vol 9 ◽  
pp. 173-177 ◽  
Author(s):  
M. Liso Nicolás ◽  
M. Jacob ◽  
T. Kürner
Keyword(s):  
Orthogonal Frequency Division Multiplexing ◽  
High Speed ◽  
Channel Model ◽  
Multipath Propagation ◽  
Signal To Noise Ratio ◽  
Physical Layer ◽  
Link Quality ◽  
60 Ghz ◽  
Single Carrier ◽  
Ieee 802.15.3C

Abstract. This paper investigates the performance of the 60 GHz IEEE 802.15.3c physical layer (PHY) specification in terms of bit error rate (BER) against signal to noise ratio. Two PHY modes of the standard have been implemented and simulated, i.e., Single Carrier and High Speed Interface. The first mode uses single carrier (SC) block transmission and the second mode uses orthogonal frequency division multiplexing (OFDM). One of the main issues in the new 60 GHz standards is multipath propagation, which plays an important role in the link quality. Thus, we have tested the PHY with the IEEE standard channel model, ray tracing simulations and real 60 GHz measurements.

Design and Simulation of High-Precision Position System Using 60 GHz Pulse

2016 ◽  
Vol 25 (08) ◽  
pp. 1650092 ◽  
Author(s):  
Jingjing Wang ◽  
Wei Shi ◽  
Xinjie Wang ◽  
Lingwei Xu ◽  
Qiuna Niu ◽  
...  
Keyword(s):  
High Precision ◽  
Communication Technology ◽  
Communication System ◽  
Orthogonal Frequency Division Multiplexing ◽  
High Speed ◽  
Wide Band ◽  
60 Ghz ◽  
Pulse System ◽  
Positioning Systems ◽  
Single Carrier

60[Formula: see text]GHz communication technology is a type of short-range and high-speed wireless communication technology, which is currently considered the most promising one because it has a very high time and multi-path resolution. Therefore, it has the potential to achieve high-precision ranging and positioning. At present, carrier communication system like orthogonal frequency division multiplexing (OFDM) or single carrier techniques using frequency domain equalization (SC-FDE), etc., are mostly used in 60[Formula: see text]GHz communication system. Furthermore, accurate wireless positioning systems is mostly based on impulse radio. We propose a pulse positioning system in 60[Formula: see text]GHz band to meet the requirements of high-precision positioning. A pulse waveform suitable for 60[Formula: see text]GHz positioning is presented, meanwhile the positioning process of pulse transmitting, channel transmission, pulse receiving and coordinates calculation using positioning algorithm is also designed and simulated. The results show that the 60[Formula: see text]GHz pulse system has millimeter-level ranging accuracy and centimeter-level positioning accuracy in line-of-sight (LOS) channel, in addition the accuracy is much higher than that in ultra-wide band (UWB) pulse system.

A Novel Reconfigurable Orthogonal Frequency Division Multiplexing Transceiver

2019 ◽  
Vol 16 (2) ◽  
pp. 430-435
Author(s):  
N. Girinath
Keyword(s):  
Orthogonal Frequency Division Multiplexing ◽  
High Speed ◽  
Frequency Division Multiplexing ◽  
Path Delay ◽  
Frequency Division ◽  
Channel Fading ◽  
High Data ◽  
Digital World ◽  
Single Carrier ◽  
Selective Mapping

As the world moves toward 3G/4G there is a need for high data rate and relatively wide bandwidths. OFDM (Orthogonal Frequency Division Multiplexing) a form of multicarrier modulation technique is widely used to achieve high speed efficient data transmission at the rate of several Mbps. It is used in Wi-Fi standards like 802.11a, 802.11n, 802.11ac, broadcast standards like Digital Video Broadcast (DVB) and cellular telecommunications standard LTE. The main advantage of OFDM compared to single carrier modulation is their robustness to channel fading in wireless environment, high baud rates and less inter symbol interference. One major disadvantage is its High PAPR. PTS partial transmit sequences (PTS) and selective mapping are proposed to reduce it. Since FFT is core block of OFDM it must be able to adapt itself to ever changing digital world. A function specific reconfigurable 2k SDF (Single path delay feedback) FFT is proposed. It utilizes less power and can be configured for different FFT sizes ranging from 16-point to 1024-point. The validity and efficiency of the architecture have been verified by simulation in hardware description language VERILOG and targeted on Virtex-6 device. Finally PAPR is estimated by MATLAB simulation.

scholarly journals Performance analysis of OFDMA and SC-FDMA

2017 ◽  
Vol 8 (2) ◽  
pp. 113-116 ◽  
Author(s):  
M. Al-Rawi
Keyword(s):  
Carrier Frequency ◽  
Orthogonal Frequency Division Multiplexing ◽  
Multiple Access ◽  
High Speed ◽  
Minimum Mean Square Error ◽  
Frequency Division ◽  
International Telecommunication Union ◽  
Single Carrier ◽  
Main Challenge ◽  
Better Than

The main challenge in any high-speed digital communication system is how to maximize the data rate with minimizing the bit error rate. Several techniques have been developed to achieve this point. Some of these techniques are orthogonal frequency division multiplexing (OFDM), single-carrier frequency domain equalization (SC-FDE), orthogonal frequency division multiple access (OFDMA), and single-carrier frequency division multiple access (SC-FDMA). These four techniques are described briefly in this paper. Also, the paper measures the performances of OFDMA and SC-FDMA systems over international telecommunication union (ITU) vehicular-A channel using minimum mean square error (MMSE) equalization. Simulation results show that the performances with interleaved mapping outperform that with localized mapping. Also, the performances with quadrature phase shift keying (QPSK) are better than that with 16-ary quadrature amplitude modulation (16QAM). In addition, the performance of SC-FDMA is better than that of OFDMA, when QPSK is used, but the latter is little bit better than that of SC-FDMA when 16QAM is used.

scholarly journals MATLAB Simulation of IEEE802.11p Technology on High User’s Mobility

2021 ◽  
Author(s):  
abderrahim mountaciri
Keyword(s):  
Phase Shift ◽  
Doppler Effect ◽  
Orthogonal Frequency Division Multiplexing ◽  
High Speed ◽  
Physical Layer ◽  
Lms Algorithm ◽  
Ieee 802.11P ◽  
Vehicular Communication ◽  
Matlab Simulation ◽  
Vehicle To Vehicle

Abstract In this article proposed IEEE 802.11p Physical layer (PHY). A MATLAB simulation is performed to analyze the baseband processing of the transceiver. Orthogonal Frequency Division Multiplexing (OFDM) is applied in this project according to the IEEE 802.11p standard, which allows data transmission rates from 3 to 27 Mbps. Separate modulation schemes, bit phase shift modulation (BPSK), quadrate phase shift modulation (QPSK), and quadrature amplitude modulation (QAM), are used for different data rates. These schemes are combined with time interleaving and a convolutional error correction code. A guard interval is inserted at the start of the transmitted symbol to reduce the effect of intersymbol interference (ISI). This article studies the PHY physical layer of the IEEE 802.11p vehicular communication standard. An IEEE.802.11p PHY model, with many associated phenomena, is implemented in the V2V vehicle-to- vehicle, and the vehicle-to-vehicle ad hoc network (VANET) provides convenient coordination between moving vehicles. A moving vehicle could move at a very high speed, producing a Doppler effect that damages OFDM symbols and also causes inter-carrier interference (ICI). This article has discussed VANET technology versus 802.11a technology, as they have many differences when it comes to user mobility. The Doppler effect resulting from the mobility of the user with a high speed of 25 to 400 km / h has been studied as the main parameter, the estimation of the channel based on the lms algorithm has been proposed in order to improve the performance of the physical physical chain

scholarly journals Optimization of system’s parameters for wavelength conversion of E-band signals

2022 ◽  
Vol 12 (2) ◽  
pp. 1659
Author(s):  
Yazan Alkhlefat ◽  
Sevia Mahdaliza Idrus Sutan Nameh ◽  
Farabi M. Iqbal
Keyword(s):  
Communication Systems ◽  
Orthogonal Frequency Division Multiplexing ◽  
High Speed ◽  
Wavelength Conversion ◽  
Signal To Noise Ratio ◽  
Optical Amplifier ◽  
Optical Signal ◽  
Error Vector Magnitude ◽  
Wavelength Converter ◽  
High Data

Current and future wireless communication systems are designed to achieve the user’s demands such as high data rate and high speed with low latency and simultaneously to save bandwidth and spectrum. In 5G and 6G networks, a high speed of transmitting and switching is required for internet of things (IoT) applications with higher capacity. To achieve these requirements a semiconductor optical amplifier (SOA) is considered as a wavelength converter to transmit a signal with an orthogonal frequency division multiplexing with subcarrier power modulation (OFDM-SPM). It exploits the subcarrier’s power in conventional OFDM block in order to send additional bits beside the normally transmitted bits. In this paper, we optimized the SOA’s parameters to have efficient wavelength conversion process. These parameters are included the injection current (IC) of SOA, power of pump and probe signals. A 7 Gbps OFDM-SPM signal with a millimeter waves (MMW) carrier of 80 GHz is considered for signal switching. The simulation results investigated and analyzed the performance of the designed system in terms of error vector magnitude (EVM), bit error rate (BER) and optical signal-to-noise ratio (OSNR). The optimum value of IC is 0.6 A while probe power is 9.45 and 8.9 dBm for pump power. The simulation is executed by virtual photonic integrated (VPI) software.

scholarly journals Coherent Optical DFT-Spread OFDM

2011 ◽  
Vol 2011 ◽  
pp. 1-4 ◽  
Author(s):  
Fanggang Wang ◽  
Xiaodong Wang
Keyword(s):  
Bandwidth Allocation ◽  
Orthogonal Frequency Division Multiplexing ◽  
High Speed ◽  
Minimum Mean Square Error ◽  
Sampling Rate ◽  
Average Power ◽  
Low Complexity ◽  
Ofdm System ◽  
Fiber Optic Communications ◽  
Single Carrier

We consider application of the discrete Fourier transform-spread orthogonal frequency-division multiplexing (DFT-spread OFDM) technique to high-speed fiber optic communications. The DFT-spread OFDM is a form of single-carrier technique that possesses almost all advantages of the multicarrier OFDM technique (such as high spectral efficiency, flexible bandwidth allocation, low sampling rate, and low-complexity equalization). In particular, we consider the optical DFT-spread OFDM system with polarization division multiplexing (PDM) that employs a tone-by-tone linear minimum mean square error (MMSE) equalizer. We show that such a system offers a much lower peak-to-average power ratio (PAPR) performance as well as better bit error rate (BER) performance compared with the optical OFDM system that employs amplitude clipping.

Bit Error Rate Performance Analysis for Various Modulation Techniques using SUI Channel in Multi-Carrier System

2017 ◽  
Vol 7 (7) ◽  
pp. 419
Author(s):  
Ramakrishna .S ◽  
Priyatam Kumar
Keyword(s):  
Orthogonal Frequency Division Multiplexing ◽  
Channel Model ◽  
Signal To Noise Ratio ◽  
Rate Performance ◽  
Frequency Division ◽  
Carrier System ◽  
Power Requirement ◽  
Channel Condition ◽  
Modulation Techniques ◽  
Selection Of

Orthogonal Frequency Division Multiplexing (OFDM) is of the strong prospects as a future wireless communication system. Improved spectral efficiency has been found in OFDM based on DFT, has a good orthogonality but inter symbol interference (ISI) and inter carrier interference (ICI) degrade the performance. ISI and ICI can be improved by using cyclic prefix (CP). About 20% of bandwidth is consumed by CP. For preferable performance DWT based OFDM gives better outlook than DFT based OFDM.. Three advantages of using DWT are desirable signal to noise ratio, desirable data rate and below per power requirement are given by wavelet based OFDM. Comparison of performances of BER using practical channel model known as Stanford University Interim (SUI) is given in this paper. Consideration to QPSK, 4QAM, 8QAM, 16 -QAM, 32QAM, 64-QAM, 128QAM and 256 QAM has been given in modeling. Channel condition and modulation are the pre - cursors given for the selection of particular performance.

scholarly journals A comparative simulation study of different decoding schemes in LDPC coded OFDM systems for NB-PLC channel

2019 ◽  
Vol 15 (1) ◽  
pp. 306
Author(s):  
Nejwa El maammar ◽  
Seddik Bri ◽  
Jaouad Foshi
Keyword(s):  
Orthogonal Frequency Division Multiplexing ◽  
Belief Propagation ◽  
Channel Model ◽  
Impulsive Noise ◽  
Multipath Propagation ◽  
Ofdm Systems ◽  
Ldpc Decoder ◽  
Power Line Communications ◽  
Decoding Algorithms ◽  
Coded Ofdm

In this paper, we study the performance of Low density Parity Check (LDPC) coded orthogonal frequency-division multiplexing (COFDM) systems  when they are applied on the short data block of a narrowband (NB) power line communications (PLC) channel. In the modelled system simulations have been performed using different code lengths. It is assumed that the channel has a multipath propagation with two different noise scenarios: AWGN background noise with and without the presence of impulsive noise. Performances of Various soft and hard decision LDPC decoder schemes such as belief propagation (BP), weighted bit flipping (WBF), improved weighted bit flipping (IWBF) and implementation-efficient reliability ratio based weighted bit flipping (IRRWBF) decoders were investigated. It has been shown for all simulations performed in PLC channel model showed that remarkable performance improvement can be achieved by using short-length LDPC codes. Especially, the improvements are striking when the BP decoding algorithms are employed on the receiver side.

Sign in / Sign up

Export Citation Format

Share Document