Influence of a MST Probe on the Measured Field Compared to a Classical Dipole Probe

Author(s):  
Andrzej E. Sowa ◽  
Robert Vogt-Ardatjew ◽  
Ikuko Mori
Keyword(s):  
1994 ◽  
Vol 30 (4) ◽  
pp. 2324-2327 ◽  
Author(s):  
L. Harwood ◽  
J. Karn

Author(s):  
K. Mendelssohn ◽  
J. D. Babbitt ◽  
Frederick Alexander Lindemann

Until a year ago it was generally accepted that if a body is made supraconducting while in a magnetic field the lines of magnetic force were "frozen in," i. e ., whatever lines of force passed through the body at the time when it became supraconducting remained there afterwards, unaffected by any change in the external field, so long as the body was supraconducting. Meissner and Ochsenfeld, however, showed that this supposition was not true. They measured field strengths in the immediate neighbourhood of cylinders which had been cooled to supraconductivity in an external magnetic field, and found that the field of force was then of the same nature as that to be expected in the neighbourhood of perfectly diamagnetic bodies. Thus it appeared that when a body becomes supraconducting in a magnetic field the lines of force are all pressed out of the body, and the induction inside the body falls to zero. At the same time, however, these authors report on another experiment, the result of which appears to us not entirely in accordance with the assumption that the induction in the whole body became zero. They measured the field strengths inside and outside a hollow cylinder, after it had become supraconducting in a field perpendicular to its axis, and found again that the field strength outside was as if the cylinder were almost perfectly diamagnetic, but the field inside was appreciably the same as if the cylinder were non-supraconducting. We therefore made a number of experiments, hoping to find out more exactly the nature of the phenomenon.


2012 ◽  
Vol 10 ◽  
pp. 1-5 ◽  
Author(s):  
B. Schetelig ◽  
S. Parr ◽  
S. Potthast ◽  
S. Dickmann

Abstract. A new kind of a modular multi-purpose robot system is developed to measure the spatial field distributions of very large as well as of small and crowded areas. The probe is automatically placed at a number of pre-defined positions where measurements are carried out. The advantages of this system are its very low influence on the measured field as well as its wide area of possible applications. In addition, the initial costs are quite low. In this paper the theory underlying the measurement principle is explained. The accuracy is analyzed and sample measurements are presented.


2012 ◽  
Vol 170-173 ◽  
pp. 1397-1401
Author(s):  
Li Yan ◽  
Jun Sheng Yang

Deformations of the tunnels may results in settlements of the ground surface. Based on the characters of deformation of twin closely adjacent tunnels excavated, a basic deformation mechanism of two parallel tunnels constructed close together was present, which is not uniform but oval-shaped ground deformation pattern and represent the ground loss occurred during construction of the tunnels. An improved convergence model of the tunnel boundary for twin closely adjacent tunnels and the related expressions are proposed. Using a computer package FLAC2D, the certain given deformations as the boundary condition were applied to the boundaries of two tunnels, and the surface settlements caused by the excavation of two tunnels were obtained. It is found that the results match well with the measured field results.


Author(s):  
Sumalee Yabsantia ◽  
Sivalee Suriyapee ◽  
Nakorn Phaisangittisakul ◽  
Sornjarod Oonsiri ◽  
Taweap Sanghangthum ◽  
...  

Abstract Introduction: This study aims to experimentally determine field output factors using the methodologies suggested by the IAEA-AAPM TRS-483 for small field dosimetry and compare with the calculation from Monte Carlo (MC) simulation. Methods: The IBA-CC01, Sun Nuclear EDGE and IBA-SFD detectors were employed to determine the uncorrected and the corrected field output factors for 6 MV photon beams. Measurements were performed at 100 cm source to axis distance, 10 cm depth in water, and the field sizes ranged from 1 × 1 to 10 × 10 cm2. The use of field output correction factors proposed by the TRS-483 was utilised to determine field output factors. The measured field output factors were compared to that calculated using the egs_chamber user code. Results: The decrease in the percentage standard deviation of the measured three detectors was observed after applying the field output correction factors. Measured field output factors using CC01 and EDGE detectors agreed with MC values within 3% for field sizes down to 1 × 1 cm2, except the SFD detector. Conclusions: The corrected field output factors agree with the calculation from MC, except the SFD detector. CC01 and EDGE are suitable for determining field output factors, while the SFD may need more implementation of the intermediate field method.


2008 ◽  
Vol 53 (4) ◽  
pp. 2160-2164
Author(s):  
Jaeun Yoo ◽  
Jaeyoung Lee ◽  
Dojun Youm ◽  
Kyu Jeong Song

Sensors ◽  
2019 ◽  
Vol 19 (2) ◽  
pp. 330 ◽  
Author(s):  
Nak Ko ◽  
Seokki Jeong ◽  
Suk-seung Hwang ◽  
Jae-Young Pyun

This paper proposes a method of estimating the attitude of an underwater vehicle. The proposed method uses two field measurements, namely, a gravitational field and a magnetic field represented in terms of vectors in three-dimensional space. In many existing methods that convert the measured field vectors into Euler angles, the yaw accuracy is affected by the uncertainty of the gravitational measurement and by the uncertainty of the magnetic field measurement. Additionally, previous methods have used the magnetic field measurement under the assumption that the magnetic field has only a horizontal component. The proposed method utilizes all field measurement components as they are, without converting them into Euler angles. The bias in the measured magnetic field vector is estimated and compensated to take full advantage of all measured field vector components. Because the proposed method deals with the measured field independently, uncertainties in the measured vectors affect the attitude estimation separately without adding up. The proposed method was tested by conducting navigation experiments with an unmanned underwater vehicle inside test tanks. The results were compared with those obtained by other methods, wherein the Euler angles converted from the measured field vectors were used as measurements.


1996 ◽  
Vol 4 (4) ◽  
pp. 20-21
Author(s):  
Curt Dunnam

Up to the present waypoint in this series on EM site magnetic fields, we have identified typical sources of time-varying magnetic field intensities, examined salient field characteristics and illustrated correct survey methods. Our goal this month is to analyze data collected at a proposed site and answer the key question of whether or not the candidate site is, as far as magnetic fields go, acceptable for EM use. In the process of analyzing the magnetic field survey data we will define some of the interpretive techniques involved and observe the distinction between localized (a.c. power) and non-localized (geomagnetic) time-varying fields. Finally, we will discuss the implications of EM susceptibility threshold vs. measured field ratios when considering remedial site shielding.


Sign in / Sign up

Export Citation Format

Share Document