Magnetic conductor based on uniaxial materials with extreme material parameters

2009 ◽  
Author(s):  
Olli Luukkonen ◽  
Constantin R. Simovski ◽  
Sergei A. Tretyakov
Keyword(s):  
Magnetic Conductor ◽  
Material Parameters

Propagation through chiroplasma waveguide using perfect magnetic conductor boundary conditions

2015 ◽  
Vol 93 (12) ◽  
pp. 1460-1465
Author(s):  
A. Ghaffar ◽  
Majeed A.S. Alkanhal
Keyword(s):  
Electromagnetic Wave ◽  
Boundary Conditions ◽  
Energy Flux ◽  
Anisotropic Material ◽  
Cylindrical Waveguide ◽  
Magnetic Conductor ◽  
Characteristic Curves ◽  
Material Parameters ◽  
Perfect Magnetic Conductor ◽  
Chirality Parameter

Analysis of electromagnetic wave propagations in a cylindrical waveguide filled with a chiroplasma core coated with a perfect magnetic conductor is presented. The presented analysis and formulations is generalized for any general isotropic or anisotropic material, including plasma and metamaterials. The characteristic equations are obtained and the behavior of its characteristic curves and the energy flux are examined and evaluated numerically. The obtained results show that the behavior of the energy flux transported in the guide, in magnitude and orientation, is highly affected by the chirality parameter and the plasma and cyclotron frequencies. The mode cut-off frequencies and transported energies are sensitive to the variations in the material parameters, particularly the variations in the chirality parameter.

Lifetime Prediction of Tires with Regard to Oxidative Aging5

2008 ◽  
Vol 36 (1) ◽  
pp. 63-79 ◽  
Author(s):  
L. Nasdala ◽  
Y. Wei ◽  
H. Rothert ◽  
M. Kaliske
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Temperature Distribution ◽  
Superposition Principle ◽  
Accelerated Aging ◽  
Material Model ◽  
Aging Behavior ◽  
Element Analysis ◽  
Material Parameters ◽  
Reaction Processes

Abstract It is a challenging task in the design of automobile tires to predict lifetime and performance on the basis of numerical simulations. Several factors have to be taken into account to correctly estimate the aging behavior. This paper focuses on oxygen reaction processes which, apart from mechanical and thermal aspects, effect the tire durability. The material parameters needed to describe the temperature-dependent oxygen diffusion and reaction processes are derived by means of the time–temperature–superposition principle from modulus profiling tests. These experiments are designed to examine the diffusion-limited oxidation (DLO) effect which occurs when accelerated aging tests are performed. For the cord-reinforced rubber composites, homogenization techniques are adopted to obtain effective material parameters (diffusivities and reaction constants). The selection and arrangement of rubber components influence the temperature distribution and the oxygen penetration depth which impact tire durability. The goal of this paper is to establish a finite element analysis based criterion to predict lifetime with respect to oxidative aging. The finite element analysis is carried out in three stages. First the heat generation rate distribution is calculated using a viscoelastic material model. Then the temperature distribution can be determined. In the third step we evaluate the oxygen distribution or rather the oxygen consumption rate, which is a measure for the tire lifetime. Thus, the aging behavior of different kinds of tires can be compared. Numerical examples show how diffusivities, reaction coefficients, and temperature influence the durability of different tire parts. It is found that due to the DLO effect, some interior parts may age slower even if the temperature is increased.

scholarly journals Research on the Non-Magnetic Conductor of a PMSM Based on the Principle of Variable Exciting Magnetic Reluctance

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 318
Author(s):  
Chunyan Li ◽  
Fei Guo ◽  
Baoquan Kou ◽  
Tao Meng
Keyword(s):  
Permanent Magnet ◽  
Electromagnetic Force ◽  
Electromotive Force ◽  
Permanent Magnets ◽  
Permanent Magnet Synchronous Motor ◽  
Synchronous Motor ◽  
Magnetic Conductor ◽  
Critical Speeds ◽  
Motor Structure ◽  
Test Result

A permanent magnet synchronous motor (PMSM) based on the principle of variable exciting magnetic reluctance (VMRPMSM) is presented. The motor is equipped with symmetrical non-magnetic conductors on both sides of the tangential magnetized permanent magnets (PMs). By placing the non-magnetic conductor (NMC), the magnetic reluctance in the exciting circuit is adjusted, and the flux weakening (FW) of the motor is realized. Hence, the NMC is studied comprehensively. On the basis of introducing the motor structure, the FW principle of this PMSM is described. The shape of the NMC is determined by analyzing and calculating the electromagnetic force (EF) acting on the PMs. We calculate the magnetic reluctance of the NMC and research on the effects of the NMC on electromagnetic force, d-axis and q-axis inductance and FW performance. The critical speeds from the test of the no-load back electromotive force (EMF) verify the correctness of the NMC design. The analysis is corresponding to the test result which lays the foundation of design for this kind of new PMSM.

scholarly journals Electric properties of olive oil under pressure

2021 ◽  
Author(s):  
L. T. Pawlicki ◽  
R. M. Siegoczyński ◽  
S. Ptasznik ◽  
K. Marszałek
Keyword(s):  
Molecular Structure ◽  
Phase Transition ◽  
Phase Diagram ◽  
Phase Transitions ◽  
Olive Oil ◽  
Material Parameters ◽  
First Order ◽  
Long Time ◽  
Capacitive Reactance ◽  
First Order Phase

AbstractThe main purpose of the experiment was a thermodynamic research with use of the electric methods chosen. The substance examined was olive oil. The paper presents the resistance, capacitive reactance, relative permittivity and resistivity of olive. Compression was applied with two mean velocities up to 450 MPa. The results were shown as functions of pressure and time and depicted on the impedance phase diagram. The three first order phase transitions have been detected. All the changes in material parameters were observed during phase transitions. The material parameters measured turned out to be the much more sensitive long-time phase transition factors than temperature. The values of material parameters and their dependence on pressure and time were compared with the molecular structure, arrangement of molecules and interactions between them. Knowledge about olive oil parameters change with pressure and its phase transitions is very important for olive oil production and conservation.

A Study on the Flow Behavior of 42CrMo Steel under Hot Compression by Thermal Physical Simulations

2010 ◽  
Vol 108-111 ◽  
pp. 494-499
Author(s):  
Ying Tong ◽  
Guo Zheng Quan ◽  
Gang Luo ◽  
Jie Zhou
Keyword(s):  
Strain Rate ◽  
Flow Behavior ◽  
Rate Sensitivity ◽  
Strain Hardening Exponent ◽  
Forming Process ◽  
Material Parameters ◽  
Basic Model ◽  
42Crmo Steel ◽  
Plastic Forming ◽  
Physical Simulations

This work was focused on the compressive deformation behavior of 42CrMo steel at temperatures from 1123K to 1348K and strain rates from 0.01s-1 to 10s-1 on a Gleeble-1500 thermo-simulation machine. The true stress-strain curves tested exhibit peak stresses at small strains, after them the flow stresses decrease monotonically until high strains, showing a dynamic flow softening. And the stress level decreases with increasing deformation temperature and decreasing strain rate. The values of strain hardening exponent n, and the strain rate sensitivity exponent m were calculated the method of multiple linear regression, the results show that the two material parameters are not constants, but changes with temperature and strain rate. Then the two variable material parameters were introduced into Fields-Backofen equation amended. Thus the constitutive mechanical discription of 42CrMo steel which can accurately describe the relationships among flow stress, temperature, strain rate, strain offers the basic model for plastic forming process simulation.

scholarly journals A simulation-based approach to evaluate objective material parameters from concrete rheometer measurements

2019 ◽  
Vol 29 (1) ◽  
pp. 130-140 ◽  
Author(s):  
Florian Gerland ◽  
Alexander Wetzel ◽  
Thomas Schomberg ◽  
Olaf Wünsch ◽  
Bernhard Middendorf
Keyword(s):  
Yield Stress ◽  
High Performance ◽  
Evaluation Method ◽  
High Performance Concrete ◽  
Direct Determination ◽  
Plastic Viscosity ◽  
Flow Properties ◽  
Fresh Sample ◽  
Material Parameters ◽  
Simulation Based

Abstract Modern concretes such as ultra-high performance concrete (UHPC) show excellent strength properties combined with favorable flow properties. However, the flow properties depend strongly on process parameters during production (temperature, humidity etc.), but also change sensitively even with slight variations in the mixture. In order to ensure desired processing of the fluidlike material and consistent process quality, the flow properties of the concrete must be evaluated quantitatively and objectively. The usual evaluation of measurements from concrete rheometers, for example of the ball probe system type, does not allow the direct determination of the objective material parameters yield stress and plastic viscosity of the sample. We developed a simulation-based method for the evaluation of rheometric measurements of fine grained high performance concretes like self-compacting concrete (SCC) and UHPC. The method is based on a dimensional analysis for ball measuring systems. Through numerical parameter studies we were able to describe the identified relationship between measuring quantities and material parameters quantitatively for two devices of this type. The evaluation method is based on the Bingham model. With this method it is possible to measure both the yield stress and the plastic viscosity of the fresh sample simultaneously. Device independence of the evaluation process is proven and an application to fiber-reinforced UHPC is presented.

Sign in / Sign up

Export Citation Format

Share Document