Integration of on-chip glass microfluidic system by a chemical foaming process (CFP)

Author(s):  
Jintang Shang ◽  
Xinhu Luo ◽  
Shunjin Qin ◽  
Wei Lin ◽  
Ching-Ping Wong ◽  
...  
Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1178 ◽  
Author(s):  
Jorge Prada ◽  
Christina Cordes ◽  
Carsten Harms ◽  
Walter Lang

This contribution outlines the design and manufacturing of a microfluidic device implemented as a biosensor for retrieval and detection of bacteria RNA. The device is fully made of Cyclo-Olefin Copolymer (COC), which features low auto-fluorescence, biocompatibility and manufacturability by hot-embossing. The RNA retrieval was carried on after bacteria heat-lysis by an on-chip micro-heater, whose function was characterized at different working parameters. Carbon resistive temperature sensors were tested, characterized and printed on the biochip sealing film to monitor the heating process. Off-chip and on-chip processed RNA were hybridized with capture probes on the reaction chamber surface and identification was achieved by detection of fluorescence tags. The application of the mentioned techniques and materials proved to allow the development of low-cost, disposable albeit multi-functional microfluidic system, performing heating, temperature sensing and chemical reaction processes in the same device. By proving its effectiveness, this device contributes a reference to show the integration potential of fully thermoplastic devices in biosensor systems.


Lab on a Chip ◽  
2021 ◽  
Author(s):  
Ningquan Wang ◽  
Ruxiu Liu ◽  
Norh Asmare ◽  
Chia-Heng Chu ◽  
Ozgun Civelekoglu ◽  
...  

An adaptive microfluidic system changing its operational state in real-time based on cell measurements through an on-chip electrical sensor network.


Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 1018
Author(s):  
Giuseppe Fiorentino ◽  
Ben Jones ◽  
Sophie Roth ◽  
Edith Grac ◽  
Murali Jayapala ◽  
...  

A composite, capillary-driven microfluidic system suitable for transmitted light microscopy of cells (e.g., red and white human blood cells) is fabricated and demonstrated. The microfluidic system consists of a microchannels network fabricated in a photo-patternable adhesive polymer on a quartz substrate, which, by means of adhesive bonding, is then connected to a silicon microfluidic die (for processing of the biological sample) and quartz die (to form the imaging chamber). The entire bonding process makes use of a very low temperature budget (200 °C). In this demonstrator, the silicon die consists of microfluidic channels with transition structures to allow conveyance of fluid utilizing capillary forces from the polymer channels to the silicon channels and back to the polymer channels. Compared to existing devices, this fully integrated platform combines on the same substrate silicon microfluidic capabilities with optical system analysis, representing a portable and versatile lab-on-chip device.


Seikei-Kakou ◽  
2017 ◽  
Vol 29 (2) ◽  
pp. 62-68
Author(s):  
Junichiro Tateishi ◽  
Norihiko Taniguchi ◽  
Tsuyoshi Nishiwaki ◽  
Sukumaran Sathish K. ◽  
Masataka Sugimoto

2015 ◽  
Vol 15 (06) ◽  
pp. 1540043 ◽  
Author(s):  
HAO SUN ◽  
ZHANDONG LI ◽  
JIANGUO TAO

Microfluidics technology has emerged as an attractive approach in physics, chemistry and biomedical science by providing increased analytical accuracy, sensitivity and efficiency in minimized systems. Numerical simulation can improve theoretical understanding, reduce prototyping consumption, and speed up development. In this paper, we setup a 3D model of an integrated microfluidic system and study the multi-physical dynamics of the system via the finite element method (FEM). The fluid–structure interaction (FSI) of fluid and an immobilized single cell within the cell trapping component, and the on-chip thermodynamics have been analyzed. The velocity magnitude and streamline of flow field, the distribution of von Mises stress and Tresca stress on the FSI interface have been studied. In addition, the on-chip heat transfer performance and temperature distribution in the heating zone have been evaluated and analyzed respectively. The presented approach is capable of optimizing microfluidic design, and revealing the complicated mechanism of multi-physical fields. Therefore, it holds the potential for improving microfluidics application in fundamental research and clinical settings.


2016 ◽  
Vol 113 (52) ◽  
pp. 14915-14920 ◽  
Author(s):  
Yih Yang Chen ◽  
Pamuditha N. Silva ◽  
Abdullah Muhammad Syed ◽  
Shrey Sindhwani ◽  
Jonathan V. Rocheleau ◽  
...  

On-chip imaging of intact three-dimensional tissues within microfluidic devices is fundamentally hindered by intratissue optical scattering, which impedes their use as tissue models for high-throughput screening assays. Here, we engineered a microfluidic system that preserves and converts tissues into optically transparent structures in less than 1 d, which is 20× faster than current passive clearing approaches. Accelerated clearing was achieved because the microfluidic system enhanced the exchange of interstitial fluids by 567-fold, which increased the rate of removal of optically scattering lipid molecules from the cross-linked tissue. Our enhanced clearing process allowed us to fluorescently image and map the segregation and compartmentalization of different cells during the formation of tumor spheroids, and to track the degradation of vasculature over time within extracted murine pancreatic islets in static culture, which may have implications on the efficacy of beta-cell transplantation treatments for type 1 diabetes. We further developed an image analysis algorithm that automates the analysis of the vasculature connectivity, volume, and cellular spatial distribution of the intact tissue. Our technique allows whole tissue analysis in microfluidic systems, and has implications in the development of organ-on-a-chip systems, high-throughput drug screening devices, and in regenerative medicine.


2021 ◽  
pp. 113332
Author(s):  
Tuo Ma ◽  
Yousu Wang ◽  
Shixin Sun ◽  
Tingrui Pan ◽  
Baoqing Li ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document