Comparison of Various UEP Techniques for IRNSS Message Structure

Author(s):  
Gangsan Kim ◽  
Hyunwoo Cho ◽  
Hong-Yeop Song ◽  
Sanguk Lee
Keyword(s):  
2018 ◽  
Vol 60 (5-6) ◽  
pp. 253-261
Author(s):  
Uwe Roth ◽  
Theophane Ngne Djoua

Abstract In this article, we propose an architecture that allows to exchange messages or data via a blockchain solution, while keeping the business process independent from the concrete blockchain. The project is the consequence of a need to have fast development of a blockchain based proof of concept that shows the feasibility of a business process, while knowing that in a future step the underlying blockchain solution has to be replaced for reasons of licensing or maximal data throughput. This is done by providing an architecture on base of layers, similar to the OSI-model, and encapsulates the used blockchain within a wrapper layer that covers all blockchain specific properties and only provides a transparent view on the reading or writing from and to the blockchain. The higher layers re-implement point-to-point communication and introduce confidentiality by the use of encryption techniques. The architecture has been tested and proven by implementing two different blockchain solutions that are shielded by specific wrapper layer implementations. This wrapper layer is responsible for the fragmentation of the sent data and their encapsulation into the concrete blockchain solution. The reconstruction of the data takes care of the data fragments being sent potentially out of order or being incomplete. A payload layer is introduced to provide point-to-point communication and to embed the main message inside a message structure. In collaboration with underlying layer it identifies for which message one is not the addressee and allow the underling layer to stop collecting unnecessary data. A crypto-layer finally provides ways of encrypting messages for one or many recipients. Having fixed layers not only allows to replace the underlying blockchain solution but also to extend or replace the other layers in case new security features or optimized protocols need to embedded. The proposed solution does not allow to use specific features like smart contracts and only provides undeniable tamper-proofed existence of a sent message.


2018 ◽  
Vol 10 (1) ◽  
Author(s):  
Emily Roberts ◽  
Theron Jeppson ◽  
Rachelle Boulton ◽  
Josh Ridderhoff

Objective: The objective of this abstract is to illustrate how the Utah Department of Health processes a high volume of electronic data. We do this by translating what reporters send within an HL7 message into "epidemiologist" language for consumption into our disease surveillance system.Introduction: In 2013, the Utah Department of Health (UDOH) began working with hospital and reference laboratories to implement electronic laboratory reporting (ELR) of reportable communicable disease data. Laboratories utilize HL7 message structure and standard terminologies such as LOINC and SNOMED to send data to UDOH. These messages must be evaluated for validity, translated, and entered into Utah’s communicable disease surveillance system (UT-NEDSS), where they can be accessed by local and state investigators and epidemiologists. Despite the development and use of standardized terminologies, reporters may use different, outdated versions of these terminologies, may not use the appropriate codes, or may send local, home-grown terminologies. These variations cause problems when trying to interpret test results and automate data processing. UDOH has developed a two-step translation process that allows us to first standardize and clean incoming messages, and then translate them for consumption by UT-NEDSS. These processes allow us to efficiently manage several different terminologies and helps to standardize incoming data, maintain data quality, and streamline the data entry process.Methods: UDOH uses the Electronic Message Staging Area (EMSA) to receive ELR messages, manage terminologies such as LOINC and SNOMED, translate messages, and automatically enter laboratory data into UT-NEDSS. LOINCs and other terms, such as facility name, sent by reporting facilities in an HL7 message are considered child terms. All child terms are mapped to a master LOINC or term and each master LOINC or term is mapped to a specific value within UT-NEDSS. In EMSA, the rules engine used for automated processing of electronic data is set to run at the master level and these rules will determine how the message is processed. No rules are set up or run on child terms.Results: As of 09/20/2017, EMSA contains 2,613 unique child LOINCs that are mapped to 906 master LOINCs. Those 906 master LOINCs are mapped to 179 UT-NEDSS test types and 2003 child facility names are mapped to 1043 master facility namesConclusions: Mapping child terminologies from an HL7 message to a master vocabulary helps us to standardize incoming data, allows us to accept non-standard terminologies and correct reporting errors. Translating this data into a format that is understandable to epidemiologists and investigators enables UT-NEDSS to work effectively in identifying outbreaks and improving health outcomes. This framework is working for ELR and will continue to grow and accept more data and the different terminologies that come with that.


Humaniora ◽  
2016 ◽  
Vol 7 (1) ◽  
pp. 63
Author(s):  
Yuliana Riana Pand ◽  
Wiliany Gui

The assumption that snacks could cause problem in diet and bodyweight, makes this study interesting. Because this product, Fitbar, appears on the market as a healthy snack that is contrary to this assumption. This product is about to prove that there is a healthy and tasty snack as snacks. Marketing communications through advertising billboards with the media aims to reach the target market. Fitbar billboard ads convey the message content in the form of information about the attributes and benefits of products such as nutritional content and product slogans. This study uses path analysis techniques to determine the effect of variable X (advertisement message) to variable Y (brand awareness) and its implications on the variable Z (brand image). The results showed that the content of the message components such as message structure, message display, message format, and the source of the message have contributed in the formation of brand awareness, which further on has implications on brand image. Influence on brand awareness message content is equal to 0.609. The effect of variable X (message) and Y (brand awareness) to variable Z (brand image) amounted to 0,365. Therefore, the use of billboards media in conveying the message to the target market of Fitbar products is to build brand awareness and the implications for brand image. 


2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Hwa-seon Kim ◽  
Seong-jin Jang ◽  
Jong-wook Jang

This study implemented a mobile diagnosing system that provides user-centered interfaces for more precisely estimating and diagnosing engine conditions through communications with the self-developed ECU only for industrial CRDI engine use. For the implemented system, a new protocol was designed and applied based on OBD-II standard to receive engine data values of the developed ECU. The designed protocol consists of a message structure to request data transmission from a smartphone to ECU and a response message structure for ECU to send data to a smartphone. It transmits 31 pieces of engine condition information simultaneously and sends the trouble diagnostic code. Because the diagnostic system enables real-time communication through modules, the engine condition information can be checked at any time. Thus, because when troubles take place on the engine, users can check them right away, quick response and resolution are possible, and stable system management can be expected.


2020 ◽  
Vol 26 (3) ◽  
pp. 528-539
Author(s):  
Bente Eriksen Hagtvet ◽  
Per Linell ◽  
James V Wertsch ◽  
Astri Heen Wold

Over a long professional lifetime, Ragnar Rommetveit contributed to numerous disciplines in the social sciences and humanities, reflecting discussions in global social science and his own unending quest to understand social and individual life. His remarkable career and impact can be outlined in terms of four main phases. The first involved general social psychology in the 1950s and was reflected in Social Norms and Roles (1953/1955). In the second phase during the 1960s and 1970s, he focused on language-related psycholinguistic research leading to publications such as his 1968 volume Words, Meanings and Messages. The third phase came in the 1970s and 1980s and was motivated by his critique of formal linguistics and resulted in his short, magisterial 1974 volume On Message Structure. The fourth phase between 1980 and 2010 focused on “dialogism,” giving rise to works such as his 1992 article “Outlines of a dialogically based social-cognitive approach to human cognition and communication.” Along with his intellectual accomplishments, Rommetveit’s brilliance and generosity inspired students and colleagues at the University of Oslo, as well as from around the world. His capacity to engage with others in unending mediations on communication and mental life ranks among his most important legacies.


Electronics ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 11
Author(s):  
Xiang Huo ◽  
Xue Wang ◽  
Sen Wang ◽  
Xiaofei Chen ◽  
Ganghua Zhou ◽  
...  

To avoid signal interference in L1 frequency and provide various services, GPS has updated a modern signal, called L1C, which has been tested with three QZSS satellites launched in 2017. In December 2018, the first GPS III satellite was launched, which implies improved joint positioning using GPS and QZSS L1C signal. The L1C signal offers a series of advanced designs in signal modulation, message structure and coding. We present complete methodologies for joint L1C signal receiving and processing. For the transmitted signals, we present a methodology and results from collecting and assessing Binary Offset Carrier (BOC) modulation and time-multiplexed BOC (TMBOC) modulation used in the L1C signal. Using the same omnidirectional antenna and test equipment, we collected the L1C signal in Xi’an and Sanya, China, respectively. The experiments in Xi’an verify the joint positioning method to complement the GPS III and QZSS satellite constellations. Our methodology evaluates the ranging difference and positioning error of BOC and TMBOC modulation under the same environment and satellite constellation configuration in Sanya. It is also verified that the joint positioning error is less than the QZSS-only positioning due to the optimization of the satellite constellation.


2001 ◽  
Vol 34 (22) ◽  
pp. 71-76
Author(s):  
Lee Changho ◽  
Kim Hongseok ◽  
Kim Daewon ◽  
Park Jaehyun

2019 ◽  
Vol 11 (3) ◽  
pp. 66 ◽  
Author(s):  
Samer Jaloudi

Most industrial and SCADA-like (supervisory control and data acquisition) systems use proprietary communication protocols, and hence interoperability is not fulfilled. However, the MODBUS TCP is an open de facto standard, and is used for some automation and telecontrol systems. It is based on a polling mechanism and follows the synchronous request–response pattern, as opposed to the asynchronous publish–subscribe pattern. In this study, polling-based and event-based protocols are investigated to realize an open and interoperable Industrial Internet of Things (IIoT) environment. Many Internet of Things (IoT) protocols are introduced and compared, and the message queuing telemetry transport (MQTT) is chosen as the event-based, publish–subscribe protocol. The study shows that MODBUS defines an optimized message structure in the application layer, which is dedicated to industrial applications. In addition, it shows that an event-oriented IoT protocol complements the MODBUS TCP but cannot replace it. Therefore, two scenarios are proposed to build the IIoT environment. The first scenario is to consider the MODBUS TCP as an IoT protocol, and build the environment using the MODBUS TCP on a standalone basis. The second scenario is to use MQTT in conjunction with the MODBUS TCP. The first scenario is efficient and complies with most industrial applications where the request–response pattern is needed only. If the publish–subscribe pattern is needed, the MQTT in the second scenario complements the MODBUS TCP and eliminates the need for a gateway; however, MQTT lacks interoperability. To maintain a homogeneous message structure for the entire environment, industrial data are organized using the structure of MODBUS messages, formatted in the UTF-8, and then transferred in the payload of an MQTT publish message. The open and interoperable environment can be used for Internet SCADA, Internet-based monitoring, and industrial control systems.


1969 ◽  
Vol 21 (3) ◽  
pp. 203-208 ◽  
Author(s):  
David Gerver

The aim of this study was to demonstrate the effect of message structure, message length, and presentation rate upon auditory short-term memory. Subjects were asked to reproduce in writing messages at different levels of “grammaticalness” (Coleman, 1965) presented through headphones at 3–4 words/sec. or 6–7 words/ sec. There was better recall of the more structured, shorter, and slower messages. The results are discussed in terms of acquisition and encoding of information.


Sign in / Sign up

Export Citation Format

Share Document