The elements of the Ethernet proliferation of data rates through the bridge layer & MAC protocol stack

Author(s):  
D. SharathBabuRao ◽  
V. Sumalatha
2013 ◽  
Vol 427-429 ◽  
pp. 2864-2869
Author(s):  
Zhi Ren ◽  
Ya Nan Cao ◽  
Shuang Peng ◽  
Hong Jiang Lei

The terahertz wave is a kind of electromagnetic waves which locates between millimeter waves and infrared lightwaves, and the frequency range is 0.14THz~10THz. Terahertz is used as a carrier wave to communicate with each other because it has large bandwidth which can support Gbps wireless data rates. Therefore, terahertz communication technologies become research hot spots in recent years. However, its still rare in MAC protocol of terahertz ultra-high data-rate wireless networks at present. In order to realize wireless access of ultra-high data-rate under the condition of terahertz carrier frequency, a novel MAC protocol is proposed in this paper. The improved MAC protocol which makes the maximum data rates reach up to 10Gbps or higher is designed by new MAC control mechanisms, new time-slots allocation schemes and new superframe structure. Theoretical analysis and simulation results show that the new proposed MAC protocol of terahertz ultra-high data-rate wireless networks can operation normally, and the maximum data rate can reach up to 19.2Gbps. This maximum data rate is 2 times higher than 5.78 Gbps which IEEE 802.15.3c can achieve.


Author(s):  
David Szczesny ◽  
Sebastian Hessel ◽  
Anas Showk ◽  
Attila Bilgic ◽  
Uwe Hildebrand ◽  
...  

This article provides a detailed profiling of the layer 2 (L2) protocol processing for 3G successor Long Term Evolution (LTE). For this purpose, the most processing intensive part of the LTE L2 data plane is executed on top of a virtual ARM based mobile phone platform. The authors measure the execution times as well as the maximum data rates at different system setups. The profiling is done for uplink (UL) and downlink (DL) directions separately as well as in a joint UL and DL scenario. As a result, the authors identify time critical algorithms in the protocol stack and check to what extent state-of-the-art hardware platforms with a single-core processor and traditional hardware acceleration concepts are still applicable for protocol processing in LTE and beyond LTE mobile devices.


2022 ◽  
Vol 22 (2) ◽  
pp. 1-26
Author(s):  
Nikumani Choudhury ◽  
Rakesh Matam ◽  
Mithun Mukherjee ◽  
Jaime Lloret

The IEEE 802.15.4 standard is one of the widely adopted specifications for realizing different applications of the Internet of Things. It defines several physical layer options and Medium Access Control (MAC) sub-layer for devices with low-power operating at low data rates. As devices implementing this standard are primarily battery-powered, minimizing their power consumption is a significant concern. Duty-cycling is one such power conserving mechanism that allows a device to schedule its active and inactive radio periods effectively, thus preventing energy drain due to idle listening. The standard specifies two parameters, beacon order and superframe order, which define the active and inactive period of a device. However, it does not specify a duty-cycling scheme to adapt these parameters for varying network conditions. Existing works in this direction are either based on superframe occupation ratio or buffer/queue length of devices. In this article, the particular limitations of both the approaches mentioned above are presented. Later, a novel duty-cycling mechanism based on MAC parameters is proposed. Also, we analyze the role of synchronization schemes in achieving efficient duty-cycles in synchronized cluster-tree network topologies. A Markov model has also been developed for the MAC protocol to estimate the delay and energy consumption during frame transmission.


Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3492 ◽  
Author(s):  
Savio Sciancalepore ◽  
Gabriele Oligeri ◽  
Roberto Di Pietro

We propose Strength of Crowd (SoC), a distributed Internet of Things (IoT) protocol that guarantees message broadcast from an initiator to all network nodes in the presence of either a reactive or a proactive jammer, that targets a variable portion of the radio spectrum. SoC exploits a simple, yet innovative and effective idea: nodes not (currently) involved in the broadcast process transmit decoy messages that cannot be distinguished (by the jammer) from the real ones. Therefore, the jammer has to implement a best-effort strategy to jam all the concurrent communications up to its frequency/energy budget. SoC exploits the inherent parallelism that stems from the massive deployments of IoT nodes to guarantee a high number of concurrent communications, exhausting the jammer capabilities and hence leaving a subset of the communications not jammed. It is worth noting that SoC could be adopted in several wireless scenarios; however, we focus on its application to the Wireless Sensor Networks (WSN) domain, including IoT, Machine-to-Machine (M2M), Device-to-Device (D2D), to name a few. In this framework, we provide several contributions: firstly, we show the details of the SoC protocol, as well as its integration with the IEEE 802.15.4-2015 MAC protocol; secondly, we study the broadcast delay to deliver the message to all the nodes in the network; and finally, we run an extensive simulation and experimental campaign to test our solution. We consider the state-of-the-art OpenMote-B experimental platform, adopting the OpenWSN open-source protocol stack. Experimental results confirm the quality and viability of our solution.


Sensors ◽  
2020 ◽  
Vol 20 (8) ◽  
pp. 2239 ◽  
Author(s):  
Subho Shankar Basu ◽  
Jetmir Haxhibeqiri ◽  
Mathias Baert ◽  
Bart Moons ◽  
Abdulkadir Karaagac ◽  
...  

The wireless Internet of Things (IoT) landscape is quite diverse. For instance, Low-Power Wide-Area Network (LPWAN) technologies offer low data rate communication over long distance, whereas Wireless Personal Area Network (WPAN) technologies can reach higher data rates, but with a reduced range. For simple IoT applications, communication requirements can be fulfilled by a single technology. However, the requirements of more demanding IoT use cases can vary over time and with the type of data being exchanged. This is pushing the design towards multimodal approaches, where different wireless IoT technologies are combined and the most appropriate one is used as per the need. This paper considers the combination of Narrow Band IoT (NB-IoT) and Bluetooth Low Energy (BLE) as communication options for an IoT device that is running a Lightweight Machine to Machine/Constrained Application Protocol (LwM2M/CoAP) protocol stack. It analyses the challenges incurred by different protocol stack options, such as different transfer modes (IP versus non-IP), the use of Static Context Header Compression (SCHC) techniques, and Datagram Transport Layer Security (DTLS) security modes, and discusses the impact of handover between both communication technologies. A suitable end-to-end architecture for the targeted multimodal communication is presented. Using a prototype implementation of this architecture, an in-depth assessment of handover and its resulting latency is performed.


Electronics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1203 ◽  
Author(s):  
Cong Lu ◽  
Bin Wu ◽  
Tianchun Ye

Improving the quality of service (QoS) performance to support existing and upcoming real-time applications is critical for IEEE 802.11n/ac devices. The mechanisms of the media access control (MAC) layer, including the aggregate MAC protocol data unit (A-MPDU) aggregation, greatly affect the QoS performance in wireless local area networks (WLANs). To investigate the impact of the aggregation level on the QoS performance for real-time multimedia applications, a novel end-to-end delay model for the unsaturated settings is proposed in this paper. The presented model considers the gathering procedure of packets, queuing behaviors, and transmissions using the RTS/CTS (request to send/clear to send) mechanism on error-prone channels. Based on the model, a novel QoS-aware A-MPDU aggregation scheduler for IEEE802.11n/ac WLANs was shown to obtain better QoS performance with lower latency and less packet loss, a larger capacity to hold higher data rates, and more working nodes. The validation of the proposed model and the promotion of the proposed scheduler are well benchmarked by ns-3.


2020 ◽  
Vol 39 (6) ◽  
pp. 8125-8137
Author(s):  
Jackson J Christy ◽  
D Rekha ◽  
V Vijayakumar ◽  
Glaucio H.S. Carvalho

Vehicular Adhoc Networks (VANET) are thought-about as a mainstay in Intelligent Transportation System (ITS). For an efficient vehicular Adhoc network, broadcasting i.e. sharing a safety related message across all vehicles and infrastructure throughout the network is pivotal. Hence an efficient TDMA based MAC protocol for VANETs would serve the purpose of broadcast scheduling. At the same time, high mobility, influential traffic density, and an altering network topology makes it strenuous to form an efficient broadcast schedule. In this paper an evolutionary approach has been chosen to solve the broadcast scheduling problem in VANETs. The paper focusses on identifying an optimal solution with minimal TDMA frames and increased transmissions. These two parameters are the converging factor for the evolutionary algorithms employed. The proposed approach uses an Adaptive Discrete Firefly Algorithm (ADFA) for solving the Broadcast Scheduling Problem (BSP). The results are compared with traditional evolutionary approaches such as Genetic Algorithm and Cuckoo search algorithm. A mathematical analysis to find the probability of achieving a time slot is done using Markov Chain analysis.


2016 ◽  
Vol 136 (11) ◽  
pp. 1555-1566 ◽  
Author(s):  
Jun Fujiwara ◽  
Hiroshi Harada ◽  
Takuya Kawata ◽  
Kentaro Sakamoto ◽  
Sota Tsuchiya ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document