In this work, the P3HT:rGO:MWCNTs (PGC) nanocomposite film applied to the ammonia gas sensor was successfully fabricated by a drop-casting technique. The results demonstrated that the optimum weight ratio of the PGC nanocomposite gas sensor is 20%:60%:20% as the weight ratio of P3HT:rGO:MWCNTs (called PGC-60). This weight ratio leads to the formation of nanostructured composites, causing the efficient adsorption/desorption of ammonia gas in/out of the film surface. The sensor based on PGC-60 possessed a response time of 30 s, sensitivity up to 3.6% at ammonia gas concentration of 10 ppm, and relative sensitivity of 0.031%/ppm. These results could be attributed to excellent electron transportation of rGO, the main adsorption activator to NH3 gas of P3HT, and holes move from P3HT to the cathodes, which works as charge “nano-bridges” carriers of Multi-Walled Carbon Nanotubes (MWCNTs). In general, these three components of PGC sensors have significantly contributed to the improvement of both the sensitivity and response time in the NH3 gas sensor.
Ammonia Gas Sensing Characteristic of P3HT-rGO-MWCNT Composite Films
