Numerical simulation of surrounding rock activity and mining pressure regularity in Haoda mine fully mechanized working face

2011 ◽  
Author(s):  
Pingping Wu ◽  
Yuanbo Zhou ◽  
Jun Han ◽  
Hong Gao ◽  
Xianfa Cui ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Surrounding Rock ◽  
Working Face ◽  
Mining Pressure ◽  
Rock Activity

scholarly journals Support design of main retracement passage in fully mechanised coal mining face based on numerical simulation

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Yalong Li ◽  
Mohanad Ahmed Almalki ◽  
Cheng Li
Keyword(s):  
Numerical Simulation ◽  
Coal Mine ◽  
Surrounding Rock ◽  
Control Measures ◽  
Coal Face ◽  
Support Design ◽  
Working Face ◽  
Surrounding Rock Control ◽  
Mining Face ◽  
Mining Pressure

Abstract For the comprehensive mechanised coal mining technology, the support design of the main withdrawal passage in the working face is an important link to achieve high yield and efficiency. Due to the impact of mining, the roof movement of the withdrawal passage is obvious, the displacement of the coal body will increase significantly, and it is easy to cause roof caving and serious lamination problems, and even lead to collapse accidents, which will affect the normal production of the mine. In this paper, the mining pressure development law of the main withdrawal passage support under the influence of dynamic pressure is designed, the most favourable roof failure form of the withdrawal passage is determined, and the action mechanism and applicable conditions of different mining pressure control measures are studied. The pressure appearance and stress distribution in the final mining stage of fully mechanised coal face are studied by numerical simulation. The deformation and failure characteristics and control measures of roof overburden in the last mining stage of fully mechanised coal face are analysed theoretically. Due to the fact that periodic pressure should be avoided as far as possible after the full-mechanised mining face is connected with the retracement passage, some auxiliary measures such as mining height control and forced roof blasting are put forward on this basis. The relative parameters of the main supporting forms are calculated. The main retracement of a fully mechanised working face in a coal mine channel is put forward to spread the surrounding rock grouting reinforcement, reinforcing roof, and help support and improve the bolt anchoring force, the main design retracement retracement channels in the channel near the return air along the trough for supporting reinforcing surrounding rock control optimisation measures, such as through the numerical simulation analysis, the optimisation measures for coal mine fully mechanised working face of surrounding rock is feasible. Numerical simulation results also show that the surrounding rock control of fully mechanised working face of coal mine design improvements, its main retreat channel under the roof subsidence, cribbing shrank significantly lower, and closer, to better control the deformation of surrounding rock, achieved significant effect, to ensure the safety of coal mine main retracement channel of fully mechanised working face support.

scholarly journals Surrounding Rock Movement of Steeply Dipping Coal Seam Using Backfill Mining

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Wenyu Lv ◽  
Kai Guo ◽  
Jianhao Yu ◽  
Xufeng Du ◽  
Kun Feng
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Surrounding Rock ◽  
Maximum Deflection ◽  
Coal Seams ◽  
Physical Similarity ◽  
Working Face ◽  
Rock Structure ◽  
Backfill Mining ◽  
The Stability

The movement of the overlying strata in steeply dipping coal seams is complex, and the deformation of roof rock beam is obvious. In general, the backfill mining method can improve the stability of the surrounding rock effectively. In this study, the 645 working face of the tested mine is used as a prototype to establish the mechanical model of the inclined roof beam using the sloping flexible shield support backfilling method in a steeply dipping coal seam, and the deflection equation is derived to obtain the roof damage structure and the maximum deflection position of the roof beam. Finally, numerical simulation and physical similarity simulation experiments are carried out to study the stability of the surrounding rock structure under backfilling mining in steeply dipping coal seams. The results show the following: (1) With the support of the gangue filling body, the inclined roof beam has smaller roof subsidence, and the maximum deflection position moves to the upper part of working face. (2) With the increase of the stope height, the stress and displacement field of the surrounding rock using the backfilling method show an asymmetrical distribution, the movement, deformation, and failure increase slowly, and the increase of the strain is relatively stable. Compared with the caving method, the range and degree of the surrounding rock disturbed by the mining stress are lower. The results of numerical simulation and physical similarity simulation experiment are generally consistent with the theoretically derived results. Overall, this study can provide theoretical basis for the safe and efficient production of steeply dipping coal seams.

scholarly journals Deviatoric Stress Evolution Laws and Control in Surrounding Rock of Soft Coal and Soft Roof Roadway under Intense Mining Conditions

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Dongdong Chen ◽  
Chunwei Ji ◽  
Shengrong Xie ◽  
En Wang ◽  
Fulian He ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Plastic Zone ◽  
Theoretical Calculations ◽  
Coal Pillar ◽  
Surrounding Rock ◽  
Deviatoric Stress ◽  
Anchor Cable ◽  
Soft Coal ◽  
Working Face ◽  
Failure Line

Aiming at the problem of large deformation and instability failure and its control of soft coal and soft roof roadway under intense mining, laboratory experiments, theoretical calculations, Flac3D numerical simulation, borehole peeping, and pressure observation were used to study the deflection characteristics of the deviatoric stress of the gas tailgate and the distribution and failure characteristics of the plastic zone in the mining face considering the strain softening characteristics of the roof and coal of roadway, and then the truss anchor cable-control technology is proposed. The results show the following: (1) The intense mining influence on the working face will deflect the peak deviatoric stress zone (PDSZ) of the surrounding rock of the gas tailgate. The influence distance of PDSZ is about 20 m in advance and 60 m in lag; the PDSZ at the gob side of the roadway is located in the range of 3–5.5 m from the surface of the coal pillar, while the coal wall side is mainly located in the range of 3–4.5 m at the shoulder corner and bottom corner of the solid coal. (2) The intense mining in the working face caused the nonuniform expansion of the surrounding rock plastic area of the gas tailgate. The two shoulder angles of the roadway and the bottom of the coal pillar have the largest damage range, and the maximum damage location is the side angle of the coal pillar (5 m). Angle and bottom angle of coal pillar are the key points of support control. (3) The plastic failure line of the surrounding rock of the gas tailgate is always between the inner and outer contours of the PDSZ, and the rock mass in the PDSZ is in a stable and unstable transition state, so the range of anchor cable support should be cross plastic failure line. (4) The theoretical calculations and numerical simulation results agree well with the drilling peep results. Based on the deflection law of the PDSZ and the expansion characteristics of the plastic zone, a truss anchor cable supporting system with integrated locking and large-scale support function is proposed to jointly control the roof and the two sides, which effectively solves the problem of weak surrounding rock roadway under severe mining deformation control problems realizing safety and efficient production in coal mines under intense mining.

scholarly journals Analysis of Roof Deformation Mechanism and Control Measures with Roof Cutting and Pressure Releasing in Gob-Side Entry Retaining

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Bing-Jun Sun ◽  
Xin-Zhu Hua ◽  
Yan Zhang ◽  
Jiadi Yin ◽  
Kai He ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Coal Mine ◽  
Surrounding Rock ◽  
Cutting Angle ◽  
Working Face ◽  
Support Resistance ◽  
Key Block ◽  
Cutting Height ◽  
Basic Roof ◽  
Roof Support

The mechanical model of the basic roof fracture structure is established on the basis of key block theory to study the roof breaking mechanism of gob-side entry retaining under roof cutting and pressure relief, and the analytical formula of roof support resistance is derived when the key block of the basic roof is stable. The influence of roof cutting angle and cutting height on roof support resistance is also analyzed. Determining the cutting seam parameters of the retained roadway roof is necessary to identify the support resistance of the roadway roof due to the correlation between the roof cutting parameters and the support resistance. Taking the II 632 haulage drift of the Hengyuan coal mine as the engineering background, FLAC3D numerical simulation is used in this paper to analyze the influence of different roof cutting angles and cutting heights on the surrounding rock structure evolution of retained roadways. Results show that the roof cutting angle and cutting height respond to the support resistance of the retained roadway roof, and the support resistance required by the roof increases with the roof cutting angle and cutting height. This condition ensures that the side roof of the gob can be cut off smoothly, and the support resistance required by the roof of retained roadways is within a reasonable range. Through theoretical and numerical simulation analysis, the reasonable roof cutting height of II 632 haulage drift is 8 m and the roof cutting angle is 15°. The theoretical analysis and numerical simulation results reveal that the required support resistance to maintain the stability of the roadway roof is 0.38 MPa. The supporting scheme of the roof of the II 632 haulage drift in the Hengyuan coal mine is then designed. Finally, the field industrial test is used for verification. The borehole imaging results show that the overall line of the retained roadway roof is small based on the description of field monitoring results. The deformation of the surrounding rock surface of the retained roadway is less than 100 mm, and the roadway is 40 m from the lagging working face. The deformation rate of surrounding rock decreases with the increase in distance from the working face. The integrity of the retained roadway roof is good, and the deformation of the surrounding rock is effectively controlled.

scholarly journals Control of Gob-Side Roadway with Large Mining Height in Inclined Thick Coal Seam: A Case Study

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Xie Fuxing
Keyword(s):  
Numerical Simulation ◽  
Coal Pillar ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Mine Pressure ◽  
Thick Coal Seam ◽  
Working Face ◽  
Rock Structure ◽  
Large Mining Height ◽  
Mining Height

The gob-side roadway of 130205, a large-mining-height working face in the Yangchangwan coal mine, was investigated in terms of the mine pressure law and support technology for large mining heights and narrow coal pillars for mining roadways. The research included field investigations, theoretical analysis, numerical simulation, field tests, and other methods. This paper analyzes the form of movement for overlying rock structure in a gob-side entry with a large mining height and summarizes the stress state and deformation failure characteristics of the surrounding rock. The failure mechanism of the surrounding rock of the gob-side roadway and controllable engineering factors causing deformation were analyzed. FLAC3D numerical simulation software was used to explore the influence law of coal pillar width, working face mining height, and mining intensity on the stability of the surrounding rock of the gob-side roadway. Ensuring the integrity of the coal pillar, improving the coordination of the system, and using asymmetric support structures as the core support concept are proposed. A reasonably designed support scheme for the gob-side roadway of the working face for 130205 was conducted, and a desirable engineering effect was obtained through field practice verification.

scholarly journals Numerical Investigation of Gob-Side Entry Retaining through Precut Overhanging Hard Roof to Control Rockburst

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Xiaoming Sun ◽  
Li Gan ◽  
Zhao Chengwei ◽  
Tang Jianquan ◽  
He Manchao ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Abutment Pressure ◽  
Feasibility Studies ◽  
Main Roof ◽  
Surrounding Rock ◽  
Distribution Characteristics ◽  
Hard Roof ◽  
Working Face ◽  
Stress Fluctuation ◽  
Peak Value

Gob-side entry retaining through precut overhanging hard roof (GERPOHR) method is one of the commonly used methods for nonpillar mining. However, feasibility studies of controlling rockburst by this method are few. Rockburst occurs in hard thick strata with a higher probability, larger scale, and higher risk. To better understand the GERPOHR method is beneficial for rockburst mitigation. In this paper, the design of GERPOHR was first introduced. And the layout of the working face was optimized. Then, based on the numerical simulation, the stress and displacement distribution characteristics were compared under the condition of conventional mining and GERPOHR method. The research shows that the intervals of main roof weighting could be decreased through the precut overhanging hard roof method. And the peak value of abutment pressure decreased. Meanwhile, the energy accumulation and the stress fluctuation could be alleviated in roadway surrounding rock.

Numerical Simulation Study on Setting Stopping Line of Working Face in Shuguang Mine

2014 ◽  
Vol 580-583 ◽  
pp. 2554-2557
Author(s):  
Hua Jun Xue ◽  
Jun Chen ◽  
Bo Liu ◽  
Jie Kong ◽  
Zhi Jun Hao
Keyword(s):  
Numerical Simulation ◽  
Recovery Rate ◽  
Coal Pillar ◽  
Economic Benefits ◽  
Surrounding Rock ◽  
Long Term Stability ◽  
Rock Stability ◽  
Working Face ◽  
Stopping Line

The surrounding rock deformation of pedestrian roadway was serious under the influence of the working face. And it has affected the safety and normal use of roadway. To ensure the long-term stability of the pedestrian roadway surrounding rock and increase the coal recovery rate of working face, the paper studied the position of stopping line of 1203 working face by numerical simulation. The results show that setting 115m wide of security coal pillar between 1203 working face and pedestrian roadway that the area of stress concentration near the working face has less effect on the pedestrian roadway could better control the surrounding rock stability of the pedestrian roadway and meet the need of the long-term normal production use. It narrows the width of security coal pillar, increase the coal resources recovery rate and achieve the better economic benefits.

scholarly journals Deformation Mechanism and Control Technology of the Surrounding Rock of the Floor Roadway under the Influence of Mining

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Qingchong Zhao ◽  
Baojie Fu ◽  
Jiadi Yin
Keyword(s):  
Numerical Simulation ◽  
Surface Displacement ◽  
Surrounding Rock ◽  
Infinite Body ◽  
Maximum Displacement ◽  
Deformation And Failure ◽  
Working Face ◽  
Before And After ◽  
Stress And Deformation ◽  
Two Sides

Deformation and failure mechanism of the surrounding rock of the floor roadway under the influence of working face mining is complicated, and roadway control is difficult. The floor roadway of the 11123 working face in Pan’er Mine is taken as the research object of this study based on semi-infinite body theory of elastic mechanics to establish a mechanical model along the advancing direction of the working face and derive the stress expression of any point in the affected area of floor mining. According to the theoretical results, effective reinforcement and support schemes are then proposed. FLAC3D numerical simulation analyzes the stress and deformation of the surrounding rock of the floor roadway before and after the reinforcement. The numerical simulation results showed that (1) mining abutment pressure of the overlying working face forms a certain range of stress concentration on the roof and two sides of the roadway and will cause deformation and damage to the floor roadway and (2) overall bearing capacity of the surrounding rock of the roadway is significantly improved, and surface displacement of the floor roadway is reduced by 64 mm through the reinforcement and support of the floor roadway. On-site monitoring data of the floor roadway in the 11123 working face of Pan’er Mine showed that the maximum displacement of the roadway roof and two sides is controlled at approximately 80 mm, and the surrounding rock deformation of the roadway is appropriately controlled to meet the needs of safe production.

Laws of Formation and Evolution of Pressure Arch in Coal Mining Adjoining Rock

2011 ◽  
Vol 243-249 ◽  
pp. 2596-2600
Author(s):  
Xiao Li Du ◽  
Hong Wei Song ◽  
Jie Chen
Keyword(s):  
Numerical Simulation ◽  
Coal Mining ◽  
Vertical Direction ◽  
Stress Transfer ◽  
Surrounding Rock ◽  
Coefficient Variation ◽  
Working Face ◽  
Formation And Evolution ◽  
Mining Face ◽  
Adjoining Rock

Based on numerical simulation of computing Software ANSYS, the curve of arching coefficient variation of pressure arch due to actual mining was analyzed aiming to a special mining face, the law of stress transfer and change in surrounding rock was discussed, and the evolving features and characteristics of pressure arch was obtained. The analysis and discussion show the following facts: Arch body will become thicker and stress in the arch body increases with working face’s driving distance increasing; the morphology of pressure arch transits from ellipsoid with long axis in the vertical direction to ellipsoid with long axis in the horizontal direction along the trend of working face; along the tendency of working face, the morphology of pressure arch is a ellipsoid with long axis in the vertical direction.

scholarly journals Research on the Deformation Mechanism and Directional Blasting Roof Cutting Control Measures of a Deep Buried High-Stress Roadway

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Xiaojie Yang ◽  
Chenkang Liu ◽  
Honglei Sun ◽  
Songlin Yue ◽  
Yuguo Ji ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
High Stress ◽  
Stable State ◽  
Surrounding Rock ◽  
Pressure Relief ◽  
Working Face ◽  
Rock Structure ◽  
Stress Fluctuation ◽  
Roadway Deformation ◽  
Cutting Height

Affected by the mining activities of the working face, the surrounding rock of the roadway is easily deformed and destroyed. For deep buried roadways, the deformation and destruction of the surrounding rock is particularly prominent. Under the influence of in situ stress fluctuation, 3−1103 tailgate of the Hongqinghe coal mine was in a complex stress environment with a maximum stress exceeding 20 MPa. Affected by mining stress, the roadway behind the working face was seriously deformed. In order to alleviate the deformation of the roadway, directional blasting and cutting measures for the 3−1103 tailgate were adopted in this paper. The mechanism of crack propagation in single-row to three-hole directional blasting was revealed by numerical simulation. The blasted rock was divided into three regions according to the crack condition. The numerical analysis of the cutting heights of 0 m, 10 m, 12 m, and 14 m, respectively, showed the stress peaks of different cutting heights and the deformation law of the surrounding rock. The pressure relief effect was the best at 14 m cutting height. At this time, the peak stress was 39 MPa with the smallest roadway deformation. Based on numerical simulation and theoretical analysis results, engineering tests were carried out. Field monitoring showed that the deformation of the roadway was inversely proportional to the roof cutting height. The higher the cutting height is, the more preferential the roadway is to reach the stable state. It can be concluded that directional blasting can change the surrounding rock structure, control the deformation of the roadway, and play a role in pressure relief. It provides a new measure to control roadway deformation.

Sign in / Sign up

Export Citation Format

Share Document