A Methodology for Fatigue Prediction of Electronic Components Under Random Vibration Load

1999 ◽  
Vol 123 (4) ◽  
pp. 394-400 ◽  
Author(s):  
Ron S. Li
Keyword(s):  
Fatigue Life ◽  
Failure Analysis ◽  
Transfer Functions ◽  
System Level ◽  
Automotive Application ◽  
Electronic Components ◽  
Detailed Model ◽  
Level Model ◽  
System Level Model ◽  
Vibration Simulation

In modern automotive control modules, mechanical failures of surface mounted electronic components such as microprocessors, crystals, capacitors, transformers, inductors, and ball grid array packages, etc., are major roadblocks to design cycle time and product reliability. This paper presents a general methodology of failure analysis and fatigue prediction of these electronic components under automotive vibration environments. Mechanical performance of these packages is studied through finite element modeling approach for given vibration environments in automotive application. The vibration simulation provides system characteristics such as modal shapes and transfer functions, and dynamic responses including displacements, accelerations, and stresses. The system level model is correlated through vibration experiments. Using the results of vibration simulation, fatigue life is predicted based on cumulative damage analysis and material durability information. Detailed model of solder/lead joints is built to correlate the system level model and obtain solder stresses. Predicted failure mechanism of the leads agrees with the experiment observation. On the test vehicle with multiple components, one of the 160-pin gull-wing lead plastic quad flat packages was chosen as an example to illustrate the approach of failure analysis and fatigue life prediction.

Fatigue Prediction of Electronic Packages Subjected to Random Vibrations

2008 ◽  
Vol 5 (1) ◽  
pp. 31-35
Author(s):  
S. Saravanan ◽  
M.I. Sakri ◽  
P.V. Mohanram
Keyword(s):  
Fatigue Life ◽  
Failure Analysis ◽  
Mechanical Performance ◽  
Dynamic Responses ◽  
System Level ◽  
Automotive Application ◽  
Lead Wire ◽  
Level Model ◽  
Ball Grid Array Packages ◽  
Vibration Simulation

In modern automotive control modules, mechanical failures of surface-mounted electronic components such as microprocessors, crystals, capacitors, inductors, transformers, ball grid array packages (BGA), quad flat packages (QFP), and chip-scale packages (CSP) are major road blocks in the design cycle and reliability of the product. This paper presents a general approach for failure analysis and fatigue prediction of electronic component like QFPs under automotive vibration environments. The mechanical performance of this package was studied through a finite element modeling approach for a given vibration environment in an automotive application. The vibration simulation provides system characteristics such as modal shapes, modal frequencies, and dynamic responses, including displacements and stresses. By using the results of vibration simulation, fatigue life is predicted based on Miner's cumulative damage ratio and the three-band technique. Detailed (local) model of the lead wire joint is built to correlate the system level model to obtain solder stresses. On the test vehicle, a 160-pin gull-wing lead plastic QFP was chosen to illustrate this approach for failure analysis and fatigue life prediction. From the analysis, it was found that the life used up by the lead wires was 11.6% of the 4-h vibration test.

scholarly journals Extraction of Boundary Condition Independent Dynamic Compact Thermal Models of LEDs—A Delphi4LED Methodology

Energies ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1628 ◽  
Author(s):  
Robin Bornoff
Keyword(s):  
Boundary Condition ◽  
Ad Hoc ◽  
Thermal Response ◽  
System Level ◽  
Detailed Model ◽  
Thermal Models ◽  
Level Model ◽  
System Level Model ◽  
Transient Thermal ◽  
Transient Thermal Response

Multi-domain electro-thermal-optical models of LEDs are required so that their thermal and optical behavior may be predicted during a luminaire design process. Today, no standardized approach exists for the extraction of such models. Therefore, models are not readily provided by LED suppliers to end-users. This results in designers of LED-based luminaires wasting time on LED characterization and ad hoc model extraction themselves. The Delphi4LED project aims to address these deficiencies by identifying standardizable methodologies to extract both electro-optical and thermal compact models of LEDs that together can be used in a multi-domain simulation context. This article describes a methodology to extract compact thermal models of LEDs that are dynamic, in that they accommodate transient thermal effects, and are boundary condition-independent, in that their accuracy is independent of their thermal operating environment. Such models are achieved by first proposing an equivalent thermal nodal network topology. The thermal resistances and capacitances of that network are identified by means of optimization so that the transient thermal response of the network matches that of either an equivalent calibrated 3D thermal model or a transient thermal measurement of a physical sample. The accuracy of the thermal network is then verified by comparing the thermal compact model with a 3D detailed model, which predicts thermal responses within a 3D system-level model.

scholarly journals Dynamic modelling of a servo self-pierce riveting (SPR) process

2021 ◽  
pp. 095440542110374
Author(s):  
Daniel Tang ◽  
Mike Evans ◽  
Paul Briskham ◽  
Luca Susmel ◽  
Neil Sims
Keyword(s):  
Dynamic Modelling ◽  
System Level ◽  
Optimum Process ◽  
Current Limit ◽  
Level Model ◽  
System Level Model ◽  
Head Height ◽  
Extensive Experimental Data ◽  
High Level

Self-pierce riveting (SPR) is a complex joining process where multiple layers of material are joined by creating a mechanical interlock via the simultaneous deformation of the inserted rivet and surrounding material. Due to the large number of variables which influence the resulting joint, finding the optimum process parameters has traditionally posed a challenge in the design of the process. Furthermore, there is a gap in knowledge regarding how changes made to the system may affect the produced joint. In this paper, a new system-level model of an inertia-based SPR system is proposed, consisting of a physics-based model of the riveting machine and an empirically-derived model of the joint. Model predictions are validated against extensive experimental data for multiple sets of input conditions, defined by the setting velocity, motor current limit and support frame type. The dynamics of the system and resulting head height of the joint are predicted to a high level of accuracy. Via a model-based case study, changes to the system are identified, which enable either the cycle time or energy consumption to be substantially reduced without compromising the overall quality of the produced joint. The predictive capabilities of the model may be leveraged to reduce the costs involved in the design and validation of SPR systems and processes.

A CFD-supported dynamic system-level model of a sodium-cooled billboard-type receiver for central tower CSP applications

Solar Energy ◽  
2019 ◽  
Vol 177 ◽  
pp. 576-594 ◽  
Author(s):  
M. Cagnoli ◽  
A. de la Calle ◽  
J. Pye ◽  
L. Savoldi ◽  
R. Zanino
Keyword(s):  
Dynamic System ◽  
System Level ◽  
Level Model ◽  
System Level Model

Implementation of a Fuel Cell System Model Into Building Energy Simulation Software IDA-ICE

2006 ◽  
Vol 4 (4) ◽  
pp. 511-515 ◽  
Author(s):  
Teemu Vesanen ◽  
Krzysztof Klobut ◽  
Jari Shemeikka
Keyword(s):  
Fuel Cell ◽  
Cell Model ◽  
Building Energy ◽  
Cell System ◽  
System Model ◽  
System Level ◽  
Fuel Cell System ◽  
Cell Systems ◽  
Level Model ◽  
System Level Model

Due to constantly increasing electricity consumption, networks are becoming overloaded and unstable. Decentralization of power generation using small-scale local cogeneration plants becomes an interesting option to improve economy and energy reliability of buildings in terms of both electricity and heat. It is expected that stationary applications in buildings will be one of the most important fields for fuel cell systems. In northern countries, like Finland, efficient utilization of heat from fuel cells is feasible. Even though the development of some fuel cell systems has already progressed to a field trial stage, relatively little is known about the interaction of fuel cells with building energy systems during a dynamic operation. This issue could be addressed using simulation techniques, but there has been a lack of adequate simulation models. International cooperation under IEA/ECBCS/Annex 42 aims at filling this gap, and the study presented in this paper is part of this effort. Our objective was to provide the means for studying the interaction between a building and a fuel cell system by incorporating a realistic fuel cell model into a building energy simulation. A two-part model for a solid-oxide fuel cell system has been developed. One part is a simplified model of the fuel cell itself. The other part is a system level model, in which a control volume boundary is assumed around a fuel cell power module and the interior of it is regarded as a “black box.” The system level model has been developed based on a specification defined within Annex 42. The cell model (programed in a spreadsheet) provides a link between inputs and outputs of the black box in the system model. This approach allows easy modifications whenever needed. The system level model has been incorporated into the building simulation tool IDA-ICE (Indoor Climate and Energy) using the neutral model format language. The first phase of model implementation has been completed. In the next phase, model validation will continue. The final goal is to create a comprehensive but flexible model, which could serve as a reliable tool to simulate the operation of different fuel cell systems in different buildings.

scholarly journals System-Level Model and Simulation of a Frequency-Tunable Vibration Energy Harvester

Micromachines ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 91 ◽  
Author(s):  
Sofiane Bouhedma ◽  
Yongchen Rao ◽  
Arwed Schütz ◽  
Chengdong Yuan ◽  
Siyang Hu ◽  
...  
Keyword(s):  
Energy Harvester ◽  
Element Model ◽  
Industrial Applications ◽  
System Level ◽  
Dual Frequency ◽  
Frequency Range ◽  
Vibration Energy Harvester ◽  
Resonance Frequencies ◽  
Level Model ◽  
System Level Model

In this paper, we present a macroscale multiresonant vibration-based energy harvester. The device features frequency tunability through magnetostatic actuation on the resonator. The magnetic tuning scheme uses external magnets on linear stages. The system-level model demonstrates autonomous adaptation of resonance frequency to the dominant ambient frequencies. The harvester is designed such that its two fundamental modes appear in the range of (50,100) Hz which is a typical frequency range for vibrations found in industrial applications. The dual-frequency characteristics of the proposed design together with the frequency agility result in an increased operative harvesting frequency range. In order to allow a time-efficient simulation of the model, a reduced order model has been derived from a finite element model. A tuning control algorithm based on maximum-voltage tracking has been implemented in the model. The device was characterized experimentally to deliver a power output of 500 µW at an excitation level of 0.5 g at the respected frequencies of 63.3 and 76.4 Hz. In a design optimization effort, an improved geometry has been derived. It yields more close resonance frequencies and optimized performance.

scholarly journals A Real Time Capable Quasi 3D System Level Model of PEM Fuel Cells

Fuel Cells ◽  
2019 ◽  
Vol 20 (1) ◽  
pp. 17-32 ◽  
Author(s):  
Gregor Tavčar ◽  
Tomaž Katrašnik
Keyword(s):  
Fuel Cells ◽  
Real Time ◽  
Pem Fuel Cells ◽  
System Level ◽  
Level Model ◽  
System Level Model
Sign in / Sign up

Export Citation Format

Share Document