Study of the Effect of Boundary Conditions on Residual Stresses in Welding Using Element Birth and Element Movement Techniques

2003 ◽  
Vol 125 (4) ◽  
pp. 432-439 ◽  
Author(s):  
Ihab F. Z. Fanous ◽  
Maher Y. A. Younan ◽  
Abdalla S. Wifi
Keyword(s):  
Residual Stresses ◽  
Boundary Conditions ◽  
Three Dimensional ◽  
Welding Process ◽  
Computation Time ◽  
The Other ◽  
Two Dimensional ◽  
The Media ◽  
Three Dimensional Models ◽  
Element Movement

The structure in which the welding process is performed highly affects the residual stresses generated in the welding. This effect is simulated by choosing the appropriate boundary conditions in modeling the welding process. The major parameters of the boundary conditions are the method by which the base metal is being fixed and the amount of heat being applied through the torch. Other parameters may include the coefficients of thermal heat loss from the plate which may simulate the media in which the welding is taking place. In modeling the welding process, two-dimensional forms of approximation were developed in analyzing most of the models of such problem. Three-dimensional models analyzing the welding process were developed in limited applications due to its high computation time and cost. With the development of new finite element tools, namely the element movement technique developed by the authors, full three-dimensional analysis of the welding process is becoming in hand. In the present work, three different boundary conditions shall be modeled comparing their effect on the welding. These boundary conditions shall be applied to two models of the welding process: one using the element birth technique and the other using the element movement technique showing the similarity in their responses verifying the effectiveness of the latter being accomplished in a shorter time.

Study of the Effect of Boundary Conditions on Residual Stresses in Welding Using Element Birth and Element Movement Techniques

2003 ◽  
Author(s):  
Ihab F. Z. Fanous ◽  
Maher Y. A. Younan ◽  
Abdalla S. Wifi
Keyword(s):  
Finite Element ◽  
Residual Stresses ◽  
Boundary Conditions ◽  
Welding Process ◽  
Computation Time ◽  
3D Models ◽  
The Other ◽  
3D Analysis ◽  
The Media ◽  
Element Movement

The structure in which the welding process is performed highly affects the residual stresses generated in the welding. This effect is simulated by choosing the appropriate boundary conditions in modeling the welding process. The major parameters of the boundary conditions are the method by which the base metal is being fixed and the amount of heat being applied through the torch. Other parameters may include the coefficients of thermal heat loss from the plate which may simulate the media in which the welding is taking place. In modeling the welding process, 2D forms of approximation were developed in analyzing most of the models of such problem. 3D models analyzing the welding process were developed in limited applications due to its high computation time and cost. With the development of new finite element tools, namely the element movement technique developed by the authors, full 3D analysis of the welding process is becoming in hand. In the present work, three different boundary conditions shall be modeled companng their effect on the welding. These boundary conditions shall be applied to two models of the welding process: one using the element birth technique and the other using the element movement technique showing the similarity in their responses verifying the effectiveness of the latter being accomplished in a shorter time.

Sight distance red zones on combined horizontal and sag vertical curves

1998 ◽  
Vol 25 (4) ◽  
pp. 621-630 ◽  
Author(s):  
Yasser Hassan ◽  
Said M Easa
Keyword(s):  
Quantitative Analysis ◽  
Three Dimensional ◽  
The Other ◽  
Two Dimensional ◽  
Horizontal Curve ◽  
Sight Distance ◽  
Stopping Sight Distance ◽  
Three Dimensional Models ◽  
Highway Alignment ◽  
Current Standards

Coordination of highway horizontal and vertical alignments is based on subjective guidelines in current standards. This paper presents a quantitative analysis of coordinating horizontal and sag vertical curves that are designed using two-dimensional standards. The locations where a horizontal curve should not be positioned relative to a sag vertical curve (called red zones) are identified. In the red zone, the available sight distance (computed using three-dimensional models) is less than the required sight distance. Two types of red zones, based on stopping sight distance (SSD) and preview sight distance (PVSD), are examined. The SSD red zone corresponds to the locations where an overlap between a horizontal curve and a sag vertical curve should be avoided because the three-dimensional sight distance will be less than the required SSD. The PVSD red zone corresponds to the locations where a horizontal curve should not start because drivers will not be able to perceive it and safely react to it. The SSD red zones exist for practical highway alignment parameters, and therefore designers should check the alignments for potential SSD red zones. The range of SSD red zones was found to depend on the different alignment parameters, especially the superelevation rate. On the other hand, the results showed that the PVSD red zones exist only for large values of the required PVSD, and therefore this type of red zones is not critical. This paper should be of particular interest to the highway designers and professionals concerned with highway safety.Key words: sight distance, red zone, combined alignment.

scholarly journals Directional hyper-reduced model for evaluation of residual welding stresses in code_aster

2018 ◽  
Author(s):  
Tuan Dinh-Trong ◽  
David Ryckelynck ◽  
Mickaël Abbas ◽  
Sofiane Hendili
Keyword(s):  
Numerical Simulation ◽  
Heat Source ◽  
Residual Stresses ◽  
Boundary Conditions ◽  
Welding Process ◽  
Computation Time ◽  
Reduced Model ◽  
Residual Welding ◽  
Parametric Studies

The welding process produces strains and residual stresses that must be taken into account to evaluate the final quality of the assembly. For that, the simulation of the process by a thermomechanical computation is very widely used. Numerical simulation uses many parameters (materials, heat source, boundary conditions) whose effects must be studied. But as the compuation becoming very expensive, massive parametric studies quickly become unusable. To reduce the computation time, we propose an approach based on the spatial and temporal similarity of thermal results, by a method of hyper-reduction on a slice of the domain.

Three-Dimensional Reconstruction of Two Forms of the Chaperonin GRO EL

1990 ◽  
Vol 48 (1) ◽  
pp. 258-259
Author(s):  
J.L. Carrascosa ◽  
G. Abella ◽  
S. Marco ◽  
M. Muyal ◽  
J.M. Carazo
Keyword(s):  
Three Dimensional ◽  
The Other ◽  
Two Dimensional ◽  
Series Method ◽  
Three Dimensional Reconstruction ◽  
Structural Components ◽  
E Coli ◽  
Dimensional Reconstruction ◽  
Morphogenetic Factors ◽  
Tilt Series

Chaperonins are a class of proteins characterized by their role as morphogenetic factors. They trantsiently interact with the structural components of certain biological aggregates (viruses, enzymes etc), promoting their correct folding, assembly and, eventually transport. The groEL factor from E. coli is a conspicuous member of the chaperonins, as it promotes the assembly and morphogenesis of bacterial oligomers and/viral structures.We have studied groEL-like factors from two different bacteria:E. coli and B.subtilis. These factors share common morphological features , showing two different views: one is 6-fold, while the other shows 7 morphological units. There is also a correlation between the presence of a dominant 6-fold view and the fact of both bacteria been grown at low temperature (32°C), while the 7-fold is the main view at higher temperatures (42°C). As the two-dimensional projections of groEL were difficult to interprete, we studied their three-dimensional reconstruction by the random conical tilt series method from negatively stained particles.

scholarly journals On the Kirchhoff-Love Hypothesis (Revised and Vindicated)

2021 ◽  
Author(s):  
Olivier Ozenda ◽  
Epifanio G. Virga
Keyword(s):  
Free Energy ◽  
Dimension Reduction ◽  
Three Dimensional ◽  
Energy Functional ◽  
The Other ◽  
Variational Model ◽  
Two Dimensional ◽  
Elastic Plates ◽  
Kinematic Constraint ◽  
Free Energy Functional

AbstractThe Kirchhoff-Love hypothesis expresses a kinematic constraint that is assumed to be valid for the deformations of a three-dimensional body when one of its dimensions is much smaller than the other two, as is the case for plates. This hypothesis has a long history checkered with the vicissitudes of life: even its paternity has been questioned, and recent rigorous dimension-reduction tools (based on standard $\varGamma $ Γ -convergence) have proven to be incompatible with it. We find that an appropriately revised version of the Kirchhoff-Love hypothesis is a valuable means to derive a two-dimensional variational model for elastic plates from a three-dimensional nonlinear free-energy functional. The bending energies thus obtained for a number of materials also show to contain measures of stretching of the plate’s mid surface (alongside the expected measures of bending). The incompatibility with standard $\varGamma $ Γ -convergence also appears to be removed in the cases where contact with that method and ours can be made.

scholarly journals Numerical aspects for efficient welding computational mechanics

2014 ◽  
Vol 18 (suppl.1) ◽  
pp. 139-148
Author(s):  
Tarek Aburuga ◽  
Aleksandar Sedmak ◽  
Zoran Radakovic
Keyword(s):  
Residual Stresses ◽  
Three Dimensional ◽  
Shell Element ◽  
Element Model ◽  
Mechanical Analysis ◽  
Tensile Test Specimen ◽  
Integrity Assessment ◽  
Mass Scaling ◽  
Three Dimensional Models ◽  
Thermal Mechanical Analysis

The effect of the residual stresses and strains is one of the most important parameter in the structure integrity assessment. A finite element model is constructed in order to simulate the multi passes mismatched submerged arc welding SAW which used in the welded tensile test specimen. Sequentially coupled thermal mechanical analysis is done by using ABAQUS software for calculating the residual stresses and distortion due to welding. In this work, three main issues were studied in order to reduce the time consuming during welding simulation which is the major problem in the computational welding mechanics (CWM). The first issue is dimensionality of the problem. Both two- and three-dimensional models are constructed for the same analysis type, shell element for two dimension simulation shows good performance comparing with brick element. The conventional method to calculate residual stress is by using implicit scheme that because of the welding and cooling time is relatively high. In this work, the author shows that it could use the explicit scheme with the mass scaling technique, and time consuming during the analysis will be reduced very efficiently. By using this new technique, it will be possible to simulate relatively large three dimensional structures.

scholarly journals TSUNAMI GENERATION AND PROPAGATION

1972 ◽  
Vol 1 (13) ◽  
pp. 146
Author(s):  
Joseph L. Hammack ◽  
Frederic Raichlen
Keyword(s):  
Linear Theory ◽  
Source Region ◽  
Three Dimensional ◽  
Frequency Dispersion ◽  
Nonlinear Effects ◽  
Its Region ◽  
Experimental Results ◽  
Specific Class ◽  
Two Dimensional ◽  
Three Dimensional Models

A linear theory is presented for waves generated by an arbitrary bed deformation {in space and time) for a two-dimensional and a three -dimensional fluid domain of uniform depth. The resulting wave profile near the source is computed for both the two and three-dimensional models for a specific class of bed deformations; experimental results are presented for the two-dimensional model. The growth of nonlinear effects during wave propagation in an ocean of uniform depth and the corresponding limitations of the linear theory are investigated. A strategy is presented for determining wave behavior at large distances from the source where linear and nonlinear effects are of equal magnitude. The strategy is based on a matching technique which employs the linear theory in its region of applicability and an equation similar to that of Korteweg and deVries (KdV) in the region where nonlinearities are equal in magnitude to frequency dispersion. Comparison of the theoretical computations with the experimental results indicates that an equation of the KdV type is the proper model of wave behavior at large distances from the source region.

CHIRAL ZEROMODES ON VORTEX-TYPE INTERSECTING FIVE-BRANE IN HETEROTIC STRING

2013 ◽  
Vol 21 ◽  
pp. 191-192
Author(s):  
MASAYA YATA
Keyword(s):  
Dirac Equation ◽  
String Theory ◽  
Boundary Conditions ◽  
Heterotic String ◽  
The Other ◽  
Two Dimensional ◽  
Complete Spectrum ◽  
Heterotic String Theory ◽  
Brane Solution ◽  
Opposite Chirality

We solve the gaugino Dirac equation on a smeared intersecting five-brane solution in E8 × E8 heterotic string theory to search for localized chiral zeromodes on the intersection. The background is chosen to depend on the full two-dimensional overall transverse coordinates to the branes. Under some appropriate boundary conditions, we compute the complete spectrum of zeromodes to find that, among infinite towers of Fourier modes, there exist only three localized normalizable zeromodes, one of which has opposite chirality to the other two.

scholarly journals A Possible Three-Dimensional Mechanism for Oscillating Wobbles in Tropical Cyclone–Like Vortices with Concentric Eyewalls

2018 ◽  
Vol 75 (7) ◽  
pp. 2157-2174 ◽  
Author(s):  
Konstantinos Menelaou ◽  
M. K. Yau ◽  
Tsz-Kin Lai
Keyword(s):  
Tropical Cyclone ◽  
Nonlinear Model ◽  
Three Dimensional ◽  
The Other ◽  
Sensitivity Analyses ◽  
Two Dimensional ◽  
Triggering Mechanism ◽  
Eigenmode Analysis ◽  
Concentric Eyewalls ◽  
Third Dimension

Abstract It is known that concentric eyewalls can influence tropical cyclone (TC) intensity. However, they can also influence TC track. Observations indicate that TCs with concentric eyewalls are often accompanied by wobbling of the inner eyewall, a motion that gives rise to cycloidal tracks. Currently, there is no general consensus of what might constitute the dominant triggering mechanism of these wobbles. In this paper we revisit the fundamentals. The control case constitutes a TC with symmetric concentric eyewalls embedded in a quiescent environment. Two sets of experiments are conducted: one using a two-dimensional nondivergent nonlinear model and the other using a three-dimensional nonlinear model. It is found that when the system is two-dimensional, no wobbling of the inner eyewall is triggered. On the other hand, when the third dimension is introduced, an amplifying wobble is evident. This result contradicts the previous suggestion that wobbles occur only in asymmetric concentric eyewalls. It also contradicts the suggestion that environmental wind shear can be the main trigger. Examination of the dynamics along with complementary linear eigenmode analysis revealed the triggering mechanism to be the excitation of a three-dimensional exponentially growing azimuthal wavenumber-1 instability. This instability is induced by the coupling of two baroclinic vortex Rossby waves across the moat region. Additional sensitivity analyses involving reasonable modifications to vortex shape parameters, perturbation vertical length scale, and Rossby number reveal that this instability can be systematically the most excited. The growth rates are shown to peak for perturbations characterized by realistic vertical length scales, suggesting that this mechanism can be potentially relevant to actual TCs.

Sign in / Sign up

Export Citation Format

Share Document