Development of a Hydrogen-Fueled Combustion Turbine Cycle for Power Generation

1998 ◽  
Vol 120 (2) ◽  
pp. 276-283 ◽  
Author(s):  
R. L. Bannister ◽  
R. A. Newby ◽  
W. C. Yang
Keyword(s):  
Steam Turbine ◽  
Rankine Cycle ◽  
Energy System ◽  
Cryogenic Liquid ◽  
Pure Oxygen ◽  
Pure Hydrogen ◽  
Development Organization ◽  
Cell Conversion ◽  
Pressure Steam ◽  
Near Term

Consideration of a hydrogen based economy is attractive because it allows energy to be transported and stored at high densities and then transformed into useful work in pollution-free turbine or fuel cell conversion systems. Through its New Energy and Industrial Technology Development Organization (NEDO) the Japanese government is sponsoring the World Energy Network (WE-NET) Program. The program is a 28-year global effort to define and implement technologies needed for a hydrogen-based energy system. A critical part of this effort is the development of a hydrogen-fueled combustion turbine system to efficiently convert the chemical energy stored in hydrogen to electricity when the hydrogen is combusted with pure oxygen. The full-scale demonstration will be a greenfield power plant located seaside. Hydrogen will be delivered to the site as a cryogenic liquid, and its cryogenic energy will be used to power an air liquefaction unit to produce pure oxygen. To meet the NEDO plant thermal cycle requirement of a minimum of 70.9 percent, low heating value (LHV), a variety of possible cycle configurations and working fluids have been investigated. This paper reports on the selection of the best cycle (a Rankine cycle), and the two levels of technology needed to support a near-term plant and a long-term plant. The combustion of pure hydrogen with pure hydrogen with pure oxygen results only in steam, thereby allowing for a direct-fired Rankine steam cycle. A near-term plant would require only development to support the design of an advanced high pressure steam turbine and an advanced intermediate pressure steam turbine.

scholarly journals Development of a Hydrogen-Fueled Combustion Turbine Cycle for Power Generation

1997 ◽  
Author(s):  
Ronald L. Bannister ◽  
Richard A. Newby ◽  
Wen-Ching Yang
Keyword(s):  
Steam Turbine ◽  
Rankine Cycle ◽  
Energy System ◽  
Cryogenic Liquid ◽  
Pure Oxygen ◽  
Pure Hydrogen ◽  
Development Organization ◽  
Cell Conversion ◽  
Pressure Steam ◽  
Near Term

Consideration of a hydrogen based economy is attractive because it allows energy to be transported and stored at high densities and then transformed into useful work in pollution-free turbine or fuel cell conversion systems. Through its New Energy and Industrial Technology Development Organization (NEDO) the Japanese government is sponsoring the World Energy Network (WE-NET) Program. The program is a 28-year global effort to define and implement technologies needed for a hydrogen-based energy system. A critical part of this effort is the development of a hydrogen-fueled combustion turbine system to efficiently convert the chemical energy stored in hydrogen to electricity when the hydrogen is combusted with pure oxygen. The full-scale demonstration will be a greenfield power plant located sea-side. Hydrogen will be delivered to the site as a cryogenic liquid, and its cryogenic energy will be used to power an air liquefaction unit to produce pure oxygen. To meet the NEDO plant thermal cycle requirement of a minimum of 70.9%, low heating value (LHV), a variety of possible cycle configurations and working fluids have been investigated. This paper reports on the selection of the best cycle (a Rankine cycle), and the two levels of technology needed to support a near-term plant and a long-term plant. The combustion of pure hydrogen with pure hydrogen with pure oxygen results only in steam, thereby allowing for a direct-fired Rankine steam cycle. A near-term plant would require only moderate development to support the design of an advanced high pressure steam turbine and an advanced intermediate pressure steam turbine.

scholarly journals Final Report on the Development of a Hydrogen-Fueled Combustion Turbine Cycle for Power Generation

1998 ◽  
Author(s):  
Ronald L. Bannister ◽  
Richard A. Newby ◽  
Wen-Ching Yang
Keyword(s):  
Reference System ◽  
Rankine Cycle ◽  
Pure Oxygen ◽  
Final Report ◽  
General Reference ◽  
Development Organization ◽  
Trade Offs ◽  
Reference Plant ◽  
Near Term

Through its New Energy and Industrial Technology Development Organization (NEDO) the Japanese government is sponsoring the World Energy Network (WE-NET) Program. WE-NET is a 28-year global effort to define and implement technologies needed for hydrogen-based energy systems. A critical part of this effort is the development of a hydrogen-fueled combustion turbine system to efficiently convert the chemical energy stored in hydrogen to electricity when hydrogen is combusted with pure oxygen. A Rankine cycle, with reheat and recuperation, was selected by Westinghouse as the general Reference System. Variations of this cycle have been examined to identify a Reference System having maximum development feasibility, while meeting the requirement of a minimum of 70.9% low heating value (LHV) efficiency. The strategy applied by Westinghouse was to assess both a near-term and long-term Reference Plant. The near-term plant requires moderate development based on extrapolation of current steam and combustion turbine technology. In contrast, the long-term plant requires more extensive development for an additional high-pressure reheat turbine, and is more complex than the near-term plant with closed-loop steam cooling and extractive feedwater heating. Trade-offs between efficiency benefits and development challenges of the near-term and long-term reference plant are identified. Results of this study can be applied to guide the future development activities of hydrogen-fueled combustion turbine systems.

Final Report on the Development of a Hydrogen-Fueled Combustion Turbine Cycle for Power Generation

1999 ◽  
Vol 121 (1) ◽  
pp. 38-45 ◽  
Author(s):  
R. L. Bannister ◽  
R. A. Newby ◽  
W. C. Yang
Keyword(s):  
Reference System ◽  
Rankine Cycle ◽  
Pure Oxygen ◽  
Final Report ◽  
General Reference ◽  
Development Organization ◽  
Trade Offs ◽  
Reference Plant ◽  
Near Term

Through its New Energy and Industrial Technology Development Organization (NEDO) the Japanese government is sponsoring the World Energy Network (WE-NET) Program. WE-NET is a 28-year global effort to define and implement technologies needed for hydrogen-based energy systems. A critical part of this effort is the development of a hydrogen-fueled combustion turbine system to efficiently convert the chemical energy stored in hydrogen to electricity when hydrogen is combusted with pure oxygen. A Rankine cycle, with reheat and recuperation, was selected by Westinghouse as the general reference system. Variations of this cycle have been examined to identify a reference system having maximum development feasibility, while meeting the requirement of a minimum of 70.9 percent low heating value (LHV) efficiency. The strategy applied by Westinghouse was to assess both a near-term and long-term Reference Plant. The near-term plant requires moderate development based on extrapolation of current steam and combustion turbine technology. In contrast, the long-term plant requires more extensive development for an additional high pressure reheat turbine, and is more complex than the near-term plant with closed-loop steam cooling and extractive feedwater heating. Trade-offs between efficiency benefits and development challenges of the near-term and long-term reference plant are identified. Results of this study can be applied to guide the future development activities of hydrogen-fueled combustion turbine systems.

scholarly journals Failure Analysis in Lacing Wire Of Last Stage Low Pressure Steam Turbine Blade

2021 ◽  
Vol 1096 (1) ◽  
pp. 012097
Author(s):  
A M Kongkong ◽  
H Setiawan ◽  
J Miftahul ◽  
A R Laksana ◽  
I Djunaedi ◽  
...  
Keyword(s):  
Failure Analysis ◽  
Steam Turbine ◽  
Turbine Blade ◽  
Low Pressure ◽  
Pressure Steam ◽  
Steam Turbine Blade ◽  
Last Stage

scholarly journals Engineering Ruthenium-Based Electrocatalysts for Effective Hydrogen Evolution Reaction

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Yingjie Yang ◽  
Yanhui Yu ◽  
Jing Li ◽  
Qingrong Chen ◽  
Yanlian Du ◽  
...  
Keyword(s):  
Hydrogen Evolution ◽  
Hydrogen Evolution Reaction ◽  
Rational Design ◽  
Energy System ◽  
Structure Design ◽  
Single Atom ◽  
Research Progress ◽  
Pure Hydrogen ◽  
Hydrogen Energy ◽  
Practical Applications

AbstractThe investigation of highly effective, durable, and cost-effective electrocatalysts for the hydrogen evolution reaction (HER) is a prerequisite for the upcoming hydrogen energy society. To establish a new hydrogen energy system and gradually replace the traditional fossil-based energy, electrochemical water-splitting is considered the most promising, environmentally friendly, and efficient way to produce pure hydrogen. Compared with the commonly used platinum (Pt)-based catalysts, ruthenium (Ru) is expected to be a good alternative because of its similar hydrogen bonding energy, lower water decomposition barrier, and considerably lower price. Analyzing and revealing the HER mechanisms, as well as identifying a rational design of Ru-based HER catalysts with desirable activity and stability is indispensable. In this review, the research progress on HER electrocatalysts and the relevant describing parameters for HER performance are briefly introduced. Moreover, four major strategies to improve the performance of Ru-based electrocatalysts, including electronic effect modulation, support engineering, structure design, and maximum utilization (single atom) are discussed. Finally, the challenges, solutions and prospects are highlighted to prompt the practical applications of Ru-based electrocatalysts for HER.

Using CFD to Enhance the Preliminary Design of High-Pressure Steam Turbines

2013 ◽  
Author(s):  
Juri Bellucci ◽  
Federica Sazzini ◽  
Filippo Rubechini ◽  
Andrea Arnone ◽  
Lorenzo Arcangeli ◽  
...  
Keyword(s):  
High Pressure ◽  
Steam Turbine ◽  
Design Tool ◽  
Tip Clearance ◽  
Large Set ◽  
Preliminary Design ◽  
Steam Turbines ◽  
High Pressure Steam ◽  
Wide Range ◽  
Pressure Steam

This paper focuses on the use of the CFD for improving a steam turbine preliminary design tool. Three-dimensional RANS analyses were carried out in order to independently investigate the effects of profile, secondary flow and tip clearance losses, on the efficiency of two high-pressure steam turbine stages. The parametric study included geometrical features such as stagger angle, aspect ratio and radius ratio, and was conducted for a wide range of flow coefficients to cover the whole operating envelope. The results are reported in terms of stage performance curves, enthalpy loss coefficients and span-wise distribution of the blade-to-blade exit angles. A detailed discussion of these results is provided in order to highlight the different aerodynamic behavior of the two geometries. Once the analysis was concluded, the tuning of a preliminary steam turbine design tool was carried out, based on a correlative approach. Due to the lack of a large set of experimental data, the information obtained from the post-processing of the CFD computations were applied to update the current correlations, in order to improve the accuracy of the efficiency evaluation for both stages. Finally, the predictions of the tuned preliminary design tool were compared with the results of the CFD computations, in terms of stage efficiency, in a broad range of flow coefficients and in different real machine layouts.

Analytic Optimization of Cost Effective Thermoelectric Generation on Top of Rankine Cycle

2013 ◽  
Author(s):  
Kazuaki Yazawa ◽  
Yee Rui Koh ◽  
Ali Shakouri
Keyword(s):  
Steam Turbine ◽  
Fuel Efficiency ◽  
Cost Effective ◽  
Rankine Cycle ◽  
Energy Conversion Efficiency ◽  
Design Parameters ◽  
Steam Temperature ◽  
Combined System ◽  
Fuel Consumption Rate ◽  
The Impact

Thermoelectric (TE) generators have a potential advantage of the wide applicable temperature range by a proper selection of materials. In contrast, a steam turbine (ST) as a Rankine cycle thermodynamic generator is limited up to more or less 630 °C for the heat source. Unlike typical waste energy recovery systems, we propose a combined system placing a TE generator on top of a ST Rankine cycle generator. This system produces an additional power from the same energy source comparing to a stand-alone steam turbine system. Fuel efficiency is essential both for the economic efficiency and the ecological friendliness, especially for the global warming concern on the carbon dioxide (CO2) emission. We report our study of the overall performance of the combined system with primarily focusing on the design parameters of thermoelectric generators. The steam temperature connecting two individual generators gives a trade-off in the system design. Too much lower the temperature reduces the ST performance and too much higher the temperature reduces the temperature difference across the TE generator hence reduces the TE performance. Based on the analytic modeling, the optimum steam temperature to be designed is found near at the maximum power design of TE generator. This optimum point changes depending on the hours-of-operation. It is because the energy conversion efficiency directly connects to the fuel consumption rate. As the result, physical upper-limit temperature of steam for ST appeared to provide the best fuel economy. We also investigated the impact of improving the figure-of-merit (ZT) of TE materials. As like generic TE engines, reduction of thermal conductivity is the most influential parameter for improvement. We also discuss the cost-performance. The combined system provides the payback per power output at the initial and also provides the significantly better energy economy [$/KWh].

Sign in / Sign up

Export Citation Format

Share Document