Spline Wear-Effects of Design and Lubrication

1975 ◽  
Vol 97 (4) ◽  
pp. 1257-1263 ◽  
Author(s):  
P. M. Ku ◽  
M. L. Valtierra
Keyword(s):  
Design Process ◽  
Low Cost ◽  
Tooth Wear ◽  
Light Weight ◽  
Angular Misalignment ◽  
Transmit Power ◽  
Tooth Fracture ◽  
Minimum Price

Spline couplings are widely used to transmit power or drive accessories, or to operate components within accessories. Their principal advantages are mechanical simplicity, compactness and light weight, and low cost. Although spline couplings have a reputation of being able to accommodate some angular misalignment, the dangers of tooth fracture, fatigue, and wear that may result should be recognized. Unfortunately, it is exceedingly difficult to achieve perfect alignment in practice; thus, the design process should prudently allow for some minimum misalignment attainable and accept a reasonable penalty. This paper is concerned with the wear of the spline teeth, which is the minimum price that must be paid if misalignment is present. Those design- and lubrication-related parameters that may be employed to minimize tooth wear are discussed.

Fused Ambipolar Aza-isoindigos with NIR absorption

2021 ◽  
Author(s):  
Liping Yao ◽  
Danlei Zhu ◽  
Hailiang Liao ◽  
Sheik Haseena ◽  
Mahesh kumar Ravva ◽  
...  
Keyword(s):  
Organic Semiconductors ◽  
High Performance ◽  
Low Cost ◽  
Light Weight ◽  
The Past ◽  
Pi Conjugated ◽  
Nir Absorption ◽  
Conjugated Organic Semiconductors

Due to their advantages of low-cost, light-weight, and mechanical flexibility, much attention has been focused on pi-conjugated organic semiconductors. In the past decade, although many materials with high performance has...

Design and Analysis of Hybrid Fused Filament Fabrication Apparatus for Fabrication of Composites

2021 ◽  
Vol 14 ◽  
Author(s):  
Aniket Yadav ◽  
Piyush Chohan ◽  
Ranvijay Kumar ◽  
Jasgurpreet Singh Chohan ◽  
Raman Kumar
Keyword(s):  
Additive Manufacturing ◽  
Composite Materials ◽  
Design Process ◽  
Low Cost ◽  
Matrix Material ◽  
Fabrication Process ◽  
Layer By Layer ◽  
Fused Filament Fabrication ◽  
Composite Manufacturing ◽  
Tool Paths

Background: Additive manufacturing is the most famous technology which requires materials or composites to be fabricated with layer by layer deposition strategy. Due to its lower cost, higher accuracy and less material wastage; this technology is used in almost every sector. But in many applications there is a need to alter the properties of a product in a certain direction with the help of some reinforcements. With the use of reinforcements, composite layers can be fabricated using additive manufacturing technique which will enhance the directional properties. A novel apparatus is designed to spray the reinforcement material into the printed structures in a very neat and precise manner. This spray nozzle is fully automated, which works according to tool-paths generated by slicing software. The alternate deposition of layers of reinforcement and build materials helped to fabricate customized composite products. Objective: The objective of present study is to design and analyze the working principle of novel technique which has been developed to fabricate composite materials using additive manufacturing. The apparatus is numerically controlled by computer according to CAD data which facilitates the deposition of alternate layers of reinforcement and matrix material. The major challenges during the design process and function of each component has been explored. Methods: The design process is initiated after comprehensive literature review performed to study previous composite manufacturing processes. The recent patents published by different patent offices of the world are studied in detail and analysis has been used to design a low cost composite fabrication apparatus. A liquid dispensing device comprises a storage tank attached with a pump and microprocessor. The microprocessor receives the signal from the computer as per tool paths generated by slicing software which decides the spray of reinforcements on polymer layers. The spraying apparatus moves in coordination with the primary nozzle of the Fused Filament Fabrication process. Results: The hybridization of Fused Filament Fabrication [process with metal spray process has been successfully performed. The apparatus facilitates the fabrication of low cost composite materials along with flexibility of complete customization of composite manufacturing process. The anisotropic behaviour of products can be easily controlled and managed during fabrication which can be used for different applications.

Detecting Wormhole Attack on Data Aggregation in Hierarchical WSN

2017 ◽  
Vol 11 (1) ◽  
pp. 35-51 ◽  
Author(s):  
Mukesh Kumar ◽  
Kamlesh Dutta
Keyword(s):  
Energy Efficiency ◽  
Data Aggregation ◽  
Low Cost ◽  
Attack Detection ◽  
Sensor Nodes ◽  
Network Data ◽  
Light Weight ◽  
Malicious Node ◽  
Combine Data ◽  
Wormhole Attack

Wireless networks are used by everyone for their convenience for transferring packets from one node to another without having a static infrastructure. In WSN, there are some nodes which are light weight, small in size, having low computation overhead, and low cost known as sensor nodes. In literature, there exists many secure data aggregation protocols available but they are not sufficient to detect the malicious node. The authors require a better security mechanism or a technique to secure the network. Data aggregation is an essential paradigm in WSN. The idea is to combine data coming from different source nodes in order to achieve energy efficiency. In this paper, the authors proposed a protocol for worm hole attack detection during data aggregation in WSN. Main focus is on wormhole attack detection and its countermeasures.

Design, Fabrication and Flight Testing of a Surveillance UAV

2015 ◽  
Vol 1115 ◽  
pp. 450-453 ◽  
Author(s):  
Moumen Idres ◽  
Burhani Makame ◽  
Bala Nabil Ahmad ◽  
Saleh Naji ◽  
Ahmad Safiuddin
Keyword(s):  
Design Process ◽  
Low Cost ◽  
Flight Test ◽  
Wing Loading ◽  
Rescue Operation ◽  
Low Weight ◽  
Carbon Rods ◽  
Power Loading ◽  
Final Design ◽  
Aerial Vehicle

Unmanned Aerial Vehicle (UAV) is becoming increasingly popular because it can perform variety of functions. These functions include surveillance, reconnaissance, monitoring, data collection and rescue operation. The purpose of this work is to design, fabricate and fly a low weight, low cost, small size UAV for a surveillance mission. The design is carried out based on Advanced Aircraft Analysis (AAA) software. The design process starts with the design specifications for a typical surveillance mission. Aircraft weight, wing loading and power loading were estimated in performance sizing process. Geometry was estimated using preliminary sizing. Aerodynamics of the aircraft was determined, which enabled the performance and stability to be analysed. If the desired performance is not achieved, the sizing is readjusted until a final design is reached. The aircraft was manufactured using foam, carbon rods, and fibreglass. The aircraft successfully flew at the first trial flight. This was followed by a successful flight with aerial photography. Keywords: UAV, design process, fabrication process, composite structure, flight test

scholarly journals An Alpine Malaise trap

2018 ◽  
Vol 2 (1) ◽  
pp. 51-58 ◽  
Author(s):  
Shasta Claire Henry ◽  
Peter B. McQuillan ◽  
James B. Kirkpatrick
Keyword(s):  
Low Cost ◽  
Sampling Period ◽  
Rough Terrain ◽  
Light Weight ◽  
Malaise Trap ◽  
Remote Locations ◽  
Insect Trap ◽  
Rapid Deployment ◽  
Alpine Environments ◽  
Malaise Traps

The Southernmost region of Australia, the island of Tasmania, is also the most mountainous, with large areas of rugged alpine environments. This entomological frontier offers a distinct suite of insects for study including many endemic taxa. However, harsh weather, remote locations and rough terrain represent an environment too extreme for many existing insect trap designs. We report here on the design and efficacy of a new Alpine Malaise Trap (AMT), which can be readily hybridised with several other common insect trapping techniques. Advantages of the design include its light weight and portability, low cost, robustness, rapid deployment and long autonomous sampling period. The AMT was field tested in the Tasmanian highlands (AUST) in 2017. A total of 16 orders were collected. As expected, samples are dominated by Diptera. However, the trap also collected a range of flightless taxa including endemic and apterous species, Apteropanorpatasmanica – closest relative of the boreal, snow scorpionflies (Boreidae). Combined and compared with other trap types the Alpine Malaise Traps captured less specimens but of a greater diversity than passive sticky traps, while drop traps captured less specimens but a greater diversity than AMT. The statistical potential of the catch is discussed.

A Review of Recent Developments in Natural Fiber Composites and their Mechanical, Thermal & Machinabilty Properties

2018 ◽  
Vol 1148 ◽  
pp. 61-71 ◽  
Author(s):  
V. Joshua Jaya Prasad ◽  
Puli Suresh Kumar
Keyword(s):  
Exponential Growth ◽  
Power Plants ◽  
Natural Fiber ◽  
Low Cost ◽  
Natural Fibers ◽  
Fiber Composites ◽  
Light Weight ◽  
Natural Fiber Composites ◽  
Research And Innovation ◽  
Recent Developments

Recently, there has been an exponential growth in research and innovation in the natural fiber composites (NFC) due to their diversified applications in the field of engineering. Biodegradability, light weight, formability and availability at low cost are the attractive merits of the natural fibers. Mechanical, Thermal and Machinabilty properties of Natural fiber composites have their own advantage and adoptability in the field of automobile, power plants, aeronautical, defense and naval applications. This review aims to provide an overview of the comparison of differ types of Natural fiber composites, factors that affect the mechanical, thermal and machinabilty of NFCs and their engineering applications.

Sign in / Sign up

Export Citation Format

Share Document