scholarly journals An Alpine Malaise trap

2018 ◽  
Vol 2 (1) ◽  
pp. 51-58 ◽  
Author(s):  
Shasta Claire Henry ◽  
Peter B. McQuillan ◽  
James B. Kirkpatrick
Keyword(s):  
Low Cost ◽  
Sampling Period ◽  
Rough Terrain ◽  
Light Weight ◽  
Malaise Trap ◽  
Remote Locations ◽  
Insect Trap ◽  
Rapid Deployment ◽  
Alpine Environments ◽  
Malaise Traps

The Southernmost region of Australia, the island of Tasmania, is also the most mountainous, with large areas of rugged alpine environments. This entomological frontier offers a distinct suite of insects for study including many endemic taxa. However, harsh weather, remote locations and rough terrain represent an environment too extreme for many existing insect trap designs. We report here on the design and efficacy of a new Alpine Malaise Trap (AMT), which can be readily hybridised with several other common insect trapping techniques. Advantages of the design include its light weight and portability, low cost, robustness, rapid deployment and long autonomous sampling period. The AMT was field tested in the Tasmanian highlands (AUST) in 2017. A total of 16 orders were collected. As expected, samples are dominated by Diptera. However, the trap also collected a range of flightless taxa including endemic and apterous species, Apteropanorpatasmanica – closest relative of the boreal, snow scorpionflies (Boreidae). Combined and compared with other trap types the Alpine Malaise Traps captured less specimens but of a greater diversity than passive sticky traps, while drop traps captured less specimens but a greater diversity than AMT. The statistical potential of the catch is discussed.

Fused Ambipolar Aza-isoindigos with NIR absorption

2021 ◽  
Author(s):  
Liping Yao ◽  
Danlei Zhu ◽  
Hailiang Liao ◽  
Sheik Haseena ◽  
Mahesh kumar Ravva ◽  
...  
Keyword(s):  
Organic Semiconductors ◽  
High Performance ◽  
Low Cost ◽  
Light Weight ◽  
The Past ◽  
Pi Conjugated ◽  
Nir Absorption ◽  
Conjugated Organic Semiconductors

Due to their advantages of low-cost, light-weight, and mechanical flexibility, much attention has been focused on pi-conjugated organic semiconductors. In the past decade, although many materials with high performance has...

Detecting Wormhole Attack on Data Aggregation in Hierarchical WSN

2017 ◽  
Vol 11 (1) ◽  
pp. 35-51 ◽  
Author(s):  
Mukesh Kumar ◽  
Kamlesh Dutta
Keyword(s):  
Energy Efficiency ◽  
Data Aggregation ◽  
Low Cost ◽  
Attack Detection ◽  
Sensor Nodes ◽  
Network Data ◽  
Light Weight ◽  
Malicious Node ◽  
Combine Data ◽  
Wormhole Attack

Wireless networks are used by everyone for their convenience for transferring packets from one node to another without having a static infrastructure. In WSN, there are some nodes which are light weight, small in size, having low computation overhead, and low cost known as sensor nodes. In literature, there exists many secure data aggregation protocols available but they are not sufficient to detect the malicious node. The authors require a better security mechanism or a technique to secure the network. Data aggregation is an essential paradigm in WSN. The idea is to combine data coming from different source nodes in order to achieve energy efficiency. In this paper, the authors proposed a protocol for worm hole attack detection during data aggregation in WSN. Main focus is on wormhole attack detection and its countermeasures.

scholarly journals Effects of Malaise trap spacing on species richness and composition of terrestrial arthropod bulk samples

2020 ◽  
Author(s):  
D Steinke ◽  
TWA Braukmann ◽  
L Manerus ◽  
A Woodhouse ◽  
V Elbrecht
Keyword(s):  
Species Richness ◽  
Field Experiments ◽  
Collection Efficiency ◽  
Malaise Trap ◽  
Number Of Factors ◽  
Large Numbers ◽  
Set Up ◽  
Taxonomic Groups ◽  
A Site ◽  
Malaise Traps

AbstractThe Malaise trap has gained popularity for assessing diverse terrestrial arthropod communities because it collects large samples with modest effort. A number of factors that influence collection efficiency, placement being one of them. For instance, when designing larger biotic surveys using arrays of Malaise traps we need to know the optimal distance between individual traps that maximises observable species richness and community composition. We examined the influence of spacing between Malaise traps by metabarcoding samples from two field experiments at a site in Waterloo, Ontario, Canada. For one experiment, we used two trap pairs deployed at weekly increasing distance (3m increments from 3 to 27 m). The second experiment involved a total of 10 traps set up in a row at 3m distance intervals for three consecutive weeks.Results show that community similarity of samples decreases over distance between traps. The amount of species shared between trap pairs shows drops considerably at about 15m trap-to-trap distance. This change can be observed across all major taxonomic groups and for two different habitat types (grassland and forest). Large numbers of OTUs found only once within samples cause rather large dissimilarity between distance pairs even at close proximity. This could be caused by a large number of transient species from adjacent habitat which arrive at the trap through passive transport, as well as capture of rare taxa, which end up in different traps by chance.

A Review of Recent Developments in Natural Fiber Composites and their Mechanical, Thermal & Machinabilty Properties

2018 ◽  
Vol 1148 ◽  
pp. 61-71 ◽  
Author(s):  
V. Joshua Jaya Prasad ◽  
Puli Suresh Kumar
Keyword(s):  
Exponential Growth ◽  
Power Plants ◽  
Natural Fiber ◽  
Low Cost ◽  
Natural Fibers ◽  
Fiber Composites ◽  
Light Weight ◽  
Natural Fiber Composites ◽  
Research And Innovation ◽  
Recent Developments

Recently, there has been an exponential growth in research and innovation in the natural fiber composites (NFC) due to their diversified applications in the field of engineering. Biodegradability, light weight, formability and availability at low cost are the attractive merits of the natural fibers. Mechanical, Thermal and Machinabilty properties of Natural fiber composites have their own advantage and adoptability in the field of automobile, power plants, aeronautical, defense and naval applications. This review aims to provide an overview of the comparison of differ types of Natural fiber composites, factors that affect the mechanical, thermal and machinabilty of NFCs and their engineering applications.

Redefining Light Weight Structural Design for Gas Marginal Field Development Through Conductor Supported Platform CSP Concept

2021 ◽  
Author(s):  
Shiiun Bak Wong ◽  
Nur Dalila Alias ◽  
Mohd Kamal Arif ◽  
Majid Shabazi
Keyword(s):  
Water Depth ◽  
Structural Design ◽  
Fast Track ◽  
Low Cost ◽  
Light Weight ◽  
Field Development ◽  
The Past ◽  
Structural Concept ◽  
The Common ◽  
Marginal Field

Abstract The rise of offshore marginal field development and low-cost CAPEX has given an impetus to O&G operators to challenge the common structural platform design especially for wellhead platform type. Demand to reduce the platform weight has been observed for the past 20 years. Typically, the challenge to meet this demand will be tremendous once the water depth exceed 50m. This paper will elaborate on how using an engineered design approach was implemented to obtain fast track onshore fabrication and offshore installation and meet the operator demand for minimal structural concept.

EFFECT OF PET PARISON SIZE ON INJECTION MOULDING MOULD DESIGN

2015 ◽  
Vol 76 (6) ◽  
Author(s):  
Najiy Rizal Suriani Rizal ◽  
Aidah Jumahat ◽  
Ummu Raihanah Hashim ◽  
Mohd Sobri Omar
Keyword(s):  
Injection Moulding ◽  
Low Cost ◽  
High Volume ◽  
Manufacturing Processes ◽  
Light Weight ◽  
Thermoplastic Material ◽  
High Volume Production ◽  
Volume Production ◽  
Mould Design ◽  
Main Component

Injection molding is one of the most popular manufacturing processes for producing good finishing plastic products with low cost and high volume production, especially for the production of plastic bottles. In order to produce high quality plastic bottle with specific size, the injection moulding mould need to be properly designed. This study is aimed to design injection moulding mould for producing three different sizes of Polyethylene Terephthalate (PET) parison. The actual dimensions of a commercial bottle preform of parisan of 25g weight were measured. PET was used as thermoplastic material because it has good strength and light weight properties. The designing process involved two primary components; (1) Female section consists of cavity plate as the main component and (2) male section consists of core plate as the main component. The effect of parisan size on the mould design was evaluated. Three different designs of female and male sections were constructed using CATIA software based on 15g, 20g and 30g parisan weight. The designs were also compared to the existing mould system of 25g PET parisan. It was shown that the design of insert cavity of female section and core cavity of male section were highly influenced by the size of the preform.

Sign in / Sign up

Export Citation Format

Share Document