Stresses in a Spherical Shell With a Nonradial Nozzle

1967 ◽  
Vol 34 (2) ◽  
pp. 299-307 ◽  
Author(s):  
D. E. Johnson
Keyword(s):  
Cylindrical Shell ◽  
Boundary Conditions ◽  
Spherical Shell ◽  
Shell Theory ◽  
Analytical Investigation ◽  
Type Method ◽  
Cylindrical Nozzle ◽  
Pass Through ◽  
External Forces ◽  
Radial Nozzle

An analytical investigation is made of the stresses due to external forces and moments acting on an elastic nonradial circular cylindrical nozzle attached to a spherical shell. The nozzle (a cylindrical shell) is nonradial in the sense that its axis is inclined and does not pass through the center of the sphere. Results are obtained by combining solutions from shell theory by a Galerkin-type method so as to satisfy boundary conditions at the intersection of the two shells. It is found that, as the nozzle inclination increases, the stresses change gradually from those previously given by Bijlaard for the radial nozzle.

Free vibration of bi-material cylindrical shells

2016 ◽  
Vol 230 (15) ◽  
pp. 2637-2649 ◽  
Author(s):  
Saeed Sarkheil ◽  
Mahmud S Foumani ◽  
Hossein M Navazi
Keyword(s):  
Exact Solution ◽  
Cylindrical Shell ◽  
Free Vibration ◽  
Boundary Conditions ◽  
State Space ◽  
Thin Shell ◽  
Shell Theory ◽  
Circular Cylindrical Shell ◽  
Space Technique ◽  
Thin Shell Theory

Based on the Sanders thin shell theory, this paper presents an exact solution for the vibration of circular cylindrical shell made of two different materials. The shell is sub-divided into two segments and the state-space technique is employed to derive the homogenous differential equations. Then continuity conditions are applied where the material of the cylindrical shell changes. Shells with various combinations of end boundary conditions are analyzed by the proposed method. Finally, solving different examples, the effect of geometric parameters as well as BCs on the vibration of the bi-material shell is studied.

scholarly journals Vibration of rotating circular cylindrical shells with distributed springs

2021 ◽  
Vol 37 ◽  
pp. 346-358
Author(s):  
Fuchun Yang ◽  
Xiaofeng Jiang ◽  
Fuxin Du
Keyword(s):  
Boundary Conditions ◽  
Galerkin Method ◽  
Shell Theory ◽  
Rotation Speed ◽  
Cylindrical Shells ◽  
Free Vibrations ◽  
Governing Equations ◽  
Natural Response ◽  
Circular Cylindrical Shells ◽  
The Galerkin Method

Abstract Free vibrations of rotating cylindrical shells with distributed springs were studied. Based on the Flügge shell theory, the governing equations of rotating cylindrical shells with distributed springs were derived under typical boundary conditions. Multicomponent modal functions were used to satisfy the distributed springs around the circumference. The natural responses were analyzed using the Galerkin method. The effects of parameters, rotation speed, stiffness, and ratios of thickness/radius and length/radius, on natural response were also examined.

Local loads on a toroidal shell

1992 ◽  
Vol 27 (2) ◽  
pp. 59-66 ◽  
Author(s):  
D Redekop ◽  
F Zhang
Keyword(s):  
Cylindrical Shell ◽  
Shell Theory ◽  
Elastic Shell ◽  
Toroidal Shell ◽  
Pipe Bend ◽  
Local Loads ◽  
Simply Supported ◽  
Linear Elastic ◽  
Wide Range ◽  
Theory Solution

In this study the effect of local loads applied on a sectorial toroidal shell (pipe bend) is considered. A linear elastic shell theory solution for local loads is first outlined. The solution corresponds to the case of a shell simply supported at the two ends. Detailed displacement and stress results are then given for a specific shell with loadings centred at three positions; the crown circles, the extrados, and the intrados. These results are compared with results for a corresponding cylindrical shell. The paper concludes with a table summarizing results for characteristic displacements and stresses in a number of shells, covering a wide range of geometric parameters.

Free vibration analysis of three-layer thin cylindrical shell with variable thickness two-dimensional FGM middle layer under arbitrary boundary conditions

2021 ◽  
pp. 109963622110204
Author(s):  
Xue-Yang Miao ◽  
Chao-Feng Li ◽  
Yu-Lin Jiang ◽  
Zi-Xuan Zhang
Keyword(s):  
Cylindrical Shell ◽  
Boundary Conditions ◽  
Volume Fraction ◽  
Ritz Method ◽  
Admissible Function ◽  
Free Vibration Analysis ◽  
Middle Layer ◽  
Two Dimensional ◽  
Arbitrary Boundary ◽  
Arbitrary Boundary Conditions

In this paper, a unified method is developed to analyze free vibrations of the three-layer functionally graded cylindrical shell with non-uniform thickness. The middle layer is composed of two-dimensional functionally gradient materials (2D-FGMs), whose thickness is set as a function of smooth continuity. Four sets of artificial springs are assigned at the ends of the shells to satisfy the arbitrary boundary conditions. The Sanders’ shell theory is used to obtain the strain and curvature-displacement relations. Furthermore, the Chebyshev polynomials are selected as the admissible function to improve computational efficiency, and the equation of motion is derived by the Rayleigh–Ritz method. The effects of spring stiffness, volume fraction indexes, configuration on of shell, and the change in thickness of the middle layer on the modal characteristics of the new structural shell are also analyzed.

Buckling of Multiple-Bay Ring-Reinforced Cylindrical Shells Subject to Hydrostatic Pressure

1953 ◽  
Vol 20 (4) ◽  
pp. 469-474
Author(s):  
W. A. Nash
Keyword(s):  
Cylindrical Shell ◽  
Hydrostatic Pressure ◽  
Strain Energy ◽  
Elastic Strain Energy ◽  
Middle Surface ◽  
Elastic Buckling ◽  
Elastic Instability ◽  
Total Potential ◽  
External Forces ◽  
Work Done

Abstract An analytical solution is presented for the problem of the elastic instability of a multiple-bay ring-reinforced cylindrical shell subject to hydrostatic pressure applied in both the radial and axial directions. The method used is that of minimization of the total potential. Expressions for the elastic strain energy in the shell and also in the rings are written in terms of displacement components of a point in the middle surface of the shell. Expressions for the work done by the external forces acting on the cylinder likewise are written in terms of these displacement components. A displacement configuration for the buckled shell is introduced which is in agreement with experimental evidence, in contrast to the arbitrary patterns assumed by previous investigators. The total potential is expressed in terms of these displacement components and is then minimized. As a result of this minimization a set of linear homogeneous equations is obtained. In order that a nontrivial solution to this system of equations exists, it is necessary that the determinant of the coefficients vanish. This condition determines the critical pressure at which elastic buckling of the cylindrical shell will occur.

Response of a Submerged Cylindrical Shell to an Axially Propagating Step Wave

1965 ◽  
Vol 32 (4) ◽  
pp. 788-792 ◽  
Author(s):  
M. J. Forrestal ◽  
G. Herrmann
Keyword(s):  
Cylindrical Shell ◽  
Steady State ◽  
Wave Front ◽  
Transverse Shear ◽  
Shell Theory ◽  
Steady State Solution ◽  
State Solution ◽  
Rotatory Inertia ◽  
Shear Deformations ◽  
Axial Coordinate

An infinitely long, circular, cylindrical shell is submerged in an acoustic medium and subjected to a plane, axially propagating step wave. The fluid-shell interaction is approximated by neglecting fluid motions in the axial direction, thereby assuming that cylindrical waves radiate away from the shell independently of the axial coordinate. Rotatory inertia and transverse shear deformations are included in the shell equations of motion, and a steady-state solution is obtained by combining the independent variables, time and the axial coordinate, through a transformation that measures the shell response from the advancing wave front. Results from the steady-state solution for the case of steel shells submerged in water are presented using both the Timoshenko-type shell theory and the bending shell theory. It is shown that previous solutions, which assumed plane waves radiated away from the vibrating shell, overestimated the dumping effect of the fluid, and that the inclusion of transverse shear deformations and rotatory inertia have an effect on the response ahead of the wave front.

Approximate Formulas for Cylindrical Shell Free Vibration Based on Vlasov’s and Enhanced Vlasov’s Semi-Momentless Theory

2018 ◽  
Author(s):  
Igor Orynyak ◽  
Yaroslav Dubyk
Keyword(s):  
Cylindrical Shell ◽  
Boundary Conditions ◽  
Circular Cylindrical Shell ◽  
Equations Of Motion ◽  
Middle Surface ◽  
Axial Direction ◽  
Mode Shapes ◽  
Natural Mode ◽  
Transverse Deflection ◽  
Approximate Formulas

Simple approximate formulas for the natural frequencies of circular cylindrical shells are presented for modes in which transverse deflection dominates. Based on the Donnell-Mushtari thin shell theory the equations of motion of the circular cylindrical shell are introduced, using Vlasov assumptions and Fourier series for the circumferential direction, an exact solution in the axial direction is obtained. To improve the results assumptions of Vlasov’s semimomentless theory are enhanced, i.e. we have used only the hypothesis of middle surface inextensibility to obtain a solution in axial direction. Nonlinear characteristic equations and natural mode shapes, are derived for all type of boundary conditions. Good agreement with experimental data and FEM is shown and advantage over the existing formulas for a variety of boundary conditions is presented.

scholarly journals Strain Growth in a Finite-Length Cylindrical Shell Under Internal Pressure Pulse

2017 ◽  
Vol 139 (2) ◽  
Author(s):  
Qi Dong ◽  
Q. M. Li ◽  
Jinyang Zheng
Keyword(s):  
Cylindrical Shell ◽  
Boundary Conditions ◽  
Internal Pressure ◽  
Finite Length ◽  
Pressure Pulse ◽  
Elastic Response ◽  
Local Dynamic ◽  
Growth Phenomenon ◽  
Modal Coupling ◽  
Elastic Responses

Strain growth is a phenomenon observed in the elastic response of containment vessels subjected to internal blast loading. The local dynamic response of a containment vessel may become larger in a later stage than its response in the earlier stage. In order to understand the possible mechanisms of the strain growth phenomenon in a cylindrical vessel, dynamic elastic responses of a finite-length cylindrical shell with different boundary conditions subjected to internal pressure pulse are studied by finite-element simulation using LS-DYNA. It is found that the strain growth in a finite-length cylindrical shell with sliding–sliding boundary conditions is caused by nonlinear modal coupling. Strain growth in a finite-length cylindrical shell with free–free or simply supported boundary conditions is primarily caused by the linear modal superposition, possibly enhanced by the nonlinear modal coupling. The understanding of these strain growth mechanisms can guide the design of cylindrical containment vessels.

Sign in / Sign up

Export Citation Format

Share Document