A Semianalytical Vibration Analysis of Partially Wet Square Cantilever Plate With Numerical and Experimental Verification: Partially Wet Modeshapes

2019 ◽  
Vol 141 (4) ◽  
Author(s):  
Y. Verma ◽  
N. Datta ◽  
R. Praharaj
Keyword(s):  
Vibration Analysis ◽  
Ritz Method ◽  
Free Edge ◽  
Cantilever Plate ◽  
Fluid Inertia ◽  
Commercial Code ◽  
Rigid Body Modes ◽  
Set Up ◽  
The Impact ◽  
Clamped Edge

A semianalytical study of a uniform homogenous partially submerged square cantilever plate vibration is presented. The structure is assumed to be a Kirchhoff's plate, clamped on one edge and free on the other edges. The lengthwise section of the plate is a cantilever clamped-free (CF) beam, while the widthwise section is a free-free (FF) beam. The plate modeshape is a weighted superposition of the product of the beam modeshapes, with unknown weights. The CF beam has only flexural modes. The FF beam has two rigid-body modes, i.e., translational and rotational modes. Rayleigh–Ritz method (RRM) is used to set up the free vibration eigenvalue problem. The eigenvector gives the unknown weights. The modeshapes generated are further used in the boundary element method (BEM) to calculate the fluid inertia, which participates in the vibration and leads to a consistent drop in frequencies. The dependence of this reduction on the submergence level is studied for the first six frequencies of the plate. The frequencies are also experimentally generated by the impact hammer test, both in the dry state, and under three distinct levels of submergence: 25%, 50%, and 75% from the free edge opposite to the clamped edge. The frequencies and modeshapes are also verified through numerical analysis using the commercial code ansys 16.0. Conclusions are drawn regarding the influence of fluid inertia distribution on the final plate modeshape, leading to insights into sound structural designs.

Wet Vibration of Low-Aspect-Ratio Aerofoil Wing: Semi-Analytical and Numerical Approach With Experimental Investigation

2017 ◽  
Author(s):  
N. Datta ◽  
A. N. Kannamwar ◽  
Y. Verma
Keyword(s):  
Aspect Ratio ◽  
Natural Frequencies ◽  
Experimental Studies ◽  
Free Edge ◽  
Numerical Approach ◽  
Source Distribution ◽  
Fluid Inertia ◽  
Low Aspect Ratio ◽  
Radiation Boundary ◽  
Set Up

The free wet vibration characteristics of an idealized low-aspect-ratio cantilever wing are studied semi-analytically, numerically, and experimentally. The wing is modeled as a tapered, hollow Kirchhoff’s plate, with the chord-wise section as a symmetrical NACA0018 aerofoil. The chord length tapers from root to tip, over the span. The main aim is to set up a suitable radiation boundary problem for the vibrating cantilever wing, in order to semi-analytically generate the wet frequencies. The efficacy of the semi-analytical wet vibration approach is studied by comparing it with the other two approaches. The difficulties encountered are due to the hollow two-way tapered shape of the wing and the free edge boundary conditions on its three sides. The semi-analytical approach is based on Galerkin’s method, which includes the modal superposition of two orthogonal beam modeshapes (Free-Free beam in chord-wise and cantilever in span-wise directions). The plate modeshapes thus generated are further used in the 3D source distribution technique to calculate the fluid inertia, leading to a consistent drop in the natural frequencies. The cantilever wing has been fabricated and tested in-house. The underwater impact hammer test generates the wet natural frequencies. The free vibration frequencies are also verified numerically using ANSYS, and compared with experimental studies.

Cantilever Plate With Concentrated Edge Load

1937 ◽  
Vol 4 (1) ◽  
pp. A8-A10 ◽  
Author(s):  
D. L. Holl
Keyword(s):  
Approximate Solution ◽  
Boundary Conditions ◽  
Finite Length ◽  
Finite Differences ◽  
Free Edge ◽  
Cantilever Plate ◽  
Transverse Stress ◽  
Longitudinal Stress ◽  
Concentrated Load ◽  
Clamped Edge

Abstract The author gives, by the method of finite differences, an approximate solution of the problem of a finite length of a cantilever plate which bears a concentrated load at the longitudinal free edge. All the boundary conditions are taken into account, and the plate action is determined approximately at all points of the plate. The author points out that a secondary maximum transverse stress occurs at the clamped edge nearest the loading point, and that the longitudinal stress is greatest directly under the loading point.

MOTIF DAN DAMPAK PERNIKAHAN DINI DI INDARUNG NGALAU BATU GADANG

2018 ◽  
Vol 1 (1) ◽  
pp. 1
Author(s):  
Murisal Murisal
Keyword(s):  
Young Men ◽  
Early Marriage ◽  
Marriage Law ◽  
Men And Women ◽  
Home Life ◽  
Family Household ◽  
Set Up ◽  
The Impact ◽  
Husband And Wife

Motif and Impact of Early Marriage in Indarung Ngalau Batu Gadang.Penelitian is motivated by teenagers who married early on. Today, young men and women have a tendency to be less prepared to enter the home life, they are only ready to marry (ready here can be interpreted, maturity in terms of financial, understand what the meaning of marriage according to marriage law) is the bond of inner birth between a man and a woman as husband and wife for the purpose of forming a happy and eternal family (household) based on the Supreme Godhead while they are not ready to set up a home, whereas to build a household requires preparation both physically and spiritually . The purpose of this study to determine the motives underlying adolescents to make early marriage and the impact caused in the household as a result of the marriage.

Dissent and Education

2018 ◽  
Author(s):  
Mark Burden
Keyword(s):  
Eighteenth Century ◽  
Seventeenth Century ◽  
Educational Activity ◽  
Educational Institutions ◽  
Higher Educational Institutions ◽  
Legal Restrictions ◽  
Higher Educational ◽  
Set Up ◽  
The Impact ◽  
Dissenting Academies

Much eighteenth-century Dissenting educational activity was built on an older tradition of Puritan endeavour. In the middle of the seventeenth century, the godly had seen education as an important tool in spreading their ideas but, in the aftermath of the Restoration, had found themselves increasingly excluded from universities and schools. Consequently, Dissenters began to develop their own higher educational institutions (in the shape of Dissenting academies) and also began to set up their own schools. While the enforcement of some of the legal restrictions that made it difficult for Dissenting institutions diminished across the eighteenth century, the restrictions did not disappear entirely. While there has been considerable focus on Dissenting academies and their contribution to debates about doctrinal orthodoxy, the impact of Dissenting schools was also considerable.

scholarly journals On Kaufmann's theory of the impact of the pianoforte hammer

1920 ◽  
Vol 97 (682) ◽  
pp. 99-110 ◽  
Keyword(s):  
Initial Conditions ◽  
Practical Importance ◽  
Prima Facie ◽  
Point Of View ◽  
Infinite Length ◽  
Modes Of Vibration ◽  
Rigorous Treatment ◽  
The Subject ◽  
Set Up ◽  
The Impact

The theory of the vibrations of the pianoforte string put forward by Kaufmann in a well-known paper has figured prominently in recent discussions on the acoustics of this instrument. It proceeds on lines radically different from those adopted by Helmholtz in his classical treatment of the subject. While recognising that the elasticity of the pianoforte hammer is not a negligible factor, Kaufmann set out to simplify the mathematical analysis by ignoring its effect altogether, and treating the hammer as a particle possessing only inertia without spring. The motion of the string following the impact of the hammer is found from the initial conditions and from the functional solutions of the equation of wave-propagation on the string. On this basis he gave a rigorous treatment of two cases: (1) a particle impinging on a stretched string of infinite length, and (2) a particle impinging on the centre of a finite string, neither of which cases is of much interest from an acoustical point of view. The case of practical importance treated by him is that in which a particle impinges on the string near one end. For this case, he gave only an approximate theory from which the duration of contact, the motion of the point struck, and the form of the vibration-curves for various points of the string could be found. There can be no doubt of the importance of Kaufmann’s work, and it naturally becomes necessary to extend and revise his theory in various directions. In several respects, the theory awaits fuller development, especially as regards the harmonic analysis of the modes of vibration set up by impact, and the detailed discussion of the influence of the elasticity of the hammer and of varying velocities of impact. Apart from these points, the question arises whether the approximate method used by Kaufmann is sufficiently accurate for practical purposes, and whether it may be regarded as applicable when, as in the pianoforte, the point struck is distant one-eighth or one-ninth of the length of the string from one end. Kaufmann’s treatment is practically based on the assumption that the part of the string between the end and the point struck remains straight as long as the hammer and string remain in contact. Primâ facie , it is clear that this assumption would introduce error when the part of the string under reference is an appreciable fraction of the whole. For the effect of the impact would obviously be to excite the vibrations of this portion of the string, which continue so long as the hammer is in contact, and would also influence the mode of vibration of the string as a whole when the hammer loses contact. A mathematical theory which is not subject to this error, and which is applicable for any position of the striking point, thus seems called for.

scholarly journals Impact of Air Infiltration on IAQ and Ventilation Efficiency in Higher Educational Classrooms in Spain

2021 ◽  
Vol 13 (12) ◽  
pp. 6875
Author(s):  
Irene Poza-Casado ◽  
Raquel Gil-Valverde ◽  
Alberto Meiss ◽  
Miguel Ángel Padilla-Marcos
Keyword(s):  
Natural Ventilation ◽  
Well Being ◽  
Cold Season ◽  
Climate Conditions ◽  
Air Infiltration ◽  
Ventilation Efficiency ◽  
Educational Buildings ◽  
Set Up ◽  
Total Volatile Organic Compounds ◽  
The Impact

Indoor air quality (IAQ) in educational buildings is a key element of the students’ well-being and academic performance. Window-opening behavior and air infiltration, generally used as the sole ventilation sources in existing educational buildings, often lead to unhealthy levels of indoor pollutants and energy waste. This paper evaluates the conditions of natural ventilation in classrooms in order to study how climate conditions affect energy waste. For that purpose, the impact of the air infiltration both on the IAQ and on the efficiency of the ventilation was evaluated in two university classrooms with natural ventilation in the Continental area of Spain. The research methodology was based on site sensors to analyze IAQ parameters such as CO2, Total Volatile Organic Compounds (TVOC), Particulate Matter (PM), and other climate parameters for a week during the cold season. Airtightness was then assessed within the classrooms and the close built environment by means of pressurization tests, and infiltration rates were estimated. The obtained results were used to set up a Computational Fluid Dynamics (CFD) model to evaluate the age of the local air and the ventilation efficiency value. The results revealed that ventilation cannot rely only on air infiltration, and, therefore, specific controlled ventilation strategies should be implemented to improve IAQ and to avoid excessive energy loss.

scholarly journals Numerical Simulation of the Impact of the Heat Source Position on Melting of a Nano-Enhanced Phase Change Material

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1425
Author(s):  
Tarek Bouzennada ◽  
Farid Mechighel ◽  
Kaouther Ghachem ◽  
Lioua Kolsi
Keyword(s):  
Heat Transfer ◽  
Phase Change ◽  
Phase Change Material ◽  
Numerical Study ◽  
Melting Rate ◽  
Heat Transfer Fluid ◽  
Commercial Code ◽  
Tube Position ◽  
The Impact ◽  
Change Material

A 2D-symmetric numerical study of a new design of Nano-Enhanced Phase change material (NEPCM)-filled enclosure is presented in this paper. The enclosure is equipped with an inner tube allowing the circulation of the heat transfer fluid (HTF); n-Octadecane is chosen as phase change material (PCM). Comsol-Multiphysics commercial code was used to solve the governing equations. This study has been performed to examine the heat distribution and melting rate under the influence of the inner-tube position and the concentration of the nanoparticles dispersed in the PCM. The inner tube was located at three different vertical positions and the nanoparticle concentration was varied from 0 to 0.06. The results revealed that both heat transfer/melting rates are improved when the inner tube is located at the bottom region of the enclosure and by increasing the concentration of the nanoparticles. The addition of the nanoparticles enhances the heat transfer due to the considerable increase in conductivity. On the other hand, by placing the tube in the bottom area of the enclosure, the liquid PCM gets a wider space, allowing the intensification of the natural convection.

Telephone-based consultation in an acute eye clinic service: A patient satisfaction survey

2021 ◽  
pp. 112067212110307
Author(s):  
Julia Sieberer ◽  
Patrick Hughes ◽  
Indy Sian
Keyword(s):  
Healthcare Professionals ◽  
Medical Specialties ◽  
New Approach ◽  
High Satisfaction ◽  
Negative Comments ◽  
Patient Responses ◽  
Set Up ◽  
Strongly Agree ◽  
The Impact ◽  
Park Hospital

Objectives: The coronavirus pandemic has forced healthcare staff across all medical specialties to adapt new and different ways of working. A new approach has been set up in the Acute Referral Clinic (ARC) at Musgrove Park Hospital and a survey has been conducted to measure the impact of the new method on patient and healthcare professionals’ satisfaction with the new service. Methods: A telephone-based consultation was introduced in ARC at Musgrove Park Hospital in March 2020 and patients were instructed to fill out a questionnaire containing eight items using a Likert Scale 1 (‘very poor/disagree’) to 4 (‘very good/strongly agree’) plus two boxes for open positive and negative comments respectively. Likewise a questionnaire was designed in order to assess the healthcare professionals’ satisfaction using the new approach. Data collection took place over a two month period between the end of March 2020 and end of May 2020. The data underwent quality control and was analysed using descriptive statistics. Results: Patient responses illustrated high satisfaction scores with an overall rating of very good (89.4%). The healthcare professionals’ rating of the service was good (28.6% – ‘very good/strongly agree’, 57.1% – ‘good/agree’). The safety rating of the new approach was overall rated ‘very good’ with 90.4% and 71.4% of patients and healthcare professionals respectively. Conclusions: The telephone consultations introduced in the wake of COVID-19 are well accepted by both patients and doctors. There are some limitations of the approach, foremost being consultation time and clinic space but these do not outweigh the general benefit of this format amidst a pandemic setting.

scholarly journals The impact of translation modality on user experience: an eye-tracking study of the Microsoft Word user interface

2021 ◽  
Author(s):  
Ana Guerberof Arenas ◽  
Joss Moorkens ◽  
Sharon O’Brien
Keyword(s):  
User Interface ◽  
Eye Tracking ◽  
Cognitive Load ◽  
Task Completion ◽  
Eye Tracker ◽  
Software Products ◽  
Microsoft Word ◽  
Set Up ◽  
The Impact ◽  
The Given

AbstractThis paper presents results of the effect of different translation modalities on users when working with the Microsoft Word user interface. An experimental study was set up with 84 Japanese, German, Spanish, and English native speakers working with Microsoft Word in three modalities: the published translated version, a machine translated (MT) version (with unedited MT strings incorporated into the MS Word interface) and the published English version. An eye-tracker measured the cognitive load and usability according to the ISO/TR 16982 guidelines: i.e., effectiveness, efficiency, and satisfaction followed by retrospective think-aloud protocol. The results show that the users’ effectiveness (number of tasks completed) does not significantly differ due to the translation modality. However, their efficiency (time for task completion) and self-reported satisfaction are significantly higher when working with the released product as opposed to the unedited MT version, especially when participants are less experienced. The eye-tracking results show that users experience a higher cognitive load when working with MT and with the human-translated versions as opposed to the English original. The results suggest that language and translation modality play a significant role in the usability of software products whether users complete the given tasks or not and even if they are unaware that MT was used to translate the interface.

Opportunities for harnessing the increased contribution of glacier and snowmelt flows in the Ganges basin

Water Policy ◽  
2013 ◽  
Vol 15 (S1) ◽  
pp. 9-25 ◽  
Author(s):  
Bharat R. Sharma ◽  
Devaraj de Condappa
Keyword(s):  
Climate Change ◽  
Aquifer Recharge ◽  
Eastern India ◽  
Ganges Basin ◽  
Additional Water ◽  
Set Up ◽  
Tehri Dam ◽  
The Ganges ◽  
The Impact ◽  
The Himalaya

The topography of the Ganges basin is highly variable, with the steep mountainous region of the Himalaya upstream and the large fertile plains in eastern India and Bangladesh downstream. The contribution from the glaciers to streamflows is supposed to be significant but there is uncertainty surrounding the impact of climate change on glaciers. An application of the Water Evaluation and Planning model was set up which contained an experimental glaciers module. The model also examined the possible impacts of an increase in temperature. The contribution from glaciated areas is significant (60–75%) in the Upper Ganges but reduces downstream, falling to about 19% at Farakka. Climate change-induced rise in temperature logically increases the quantity of snow and ice that melts in glaciated areas. However, this impact decreases from upstream (+8% to +26% at Tehri dam) to downstream (+1% to +4% at Farakka). Such increases in streamflows may create flood events more frequently, or of higher magnitude, in the upper reaches. Potential strategies to exploit this additional water may include the construction of new dams/reservoir storage and the development of groundwater in the basin through managed aquifer recharge. The riparian states of India, Nepal and Bangladesh could harness this opportunity to alleviate physical water scarcity and improve productivity.

Sign in / Sign up

Export Citation Format

Share Document