Transient Analysis of Heated Vapor Extraction System for Effective Remediation

2003 ◽  
Author(s):  
R. S. Jadhav ◽  
R. S. Amano ◽  
J. Jatkar ◽  
R. J. Lind
Keyword(s):  
Research Effort ◽  
Cost Effective ◽  
Extraction System ◽  
Vapor Extraction ◽  
Discrete Phase Modeling ◽  
Discrete Phase ◽  
Chemical Companies ◽  
Time Required ◽  
Volume Method ◽  
Remediation Process

A soil remediation process has gained an enormous attention for the last decade in order to make the surroundings environmentally friendly. The areas around chemical companies or waste disposal sites have been seriously contaminated from the chemicals and other polluting materials that are disposed off. Different soil remedial processes are used for different types of pollutants. The present research effort is concentrated on modeling the Heated Vapor Extraction System, which is a very efficient and cost effective process. A numerical model is developed and Finite Volume Method is used to solve the model. The analysis uses the species transport and discrete phase modeling to predict the time required to clean the soil under specific conditions. The analysis was used as a mathematical computational tool to predict various parameters for the process so that the process can be made more efficient and effective in remedial achievements.

A Transient Simulation of Heated Soil Vapor Extraction System

Volume 1 ◽  
2004 ◽  
Author(s):  
T. Roy ◽  
R. S. Amano ◽  
J. Jatkar
Keyword(s):  
Heat Source ◽  
Three Dimensional ◽  
Soil Vapor Extraction ◽  
Extraction System ◽  
Vapor Extraction ◽  
Predictive Tool ◽  
Heating Source ◽  
Time Required ◽  
Heated Soil ◽  
Remediation Process

Soil remediation process by heated soil vapor extraction system has drawn considerably attention for the last few years. The areas around chemical companies or waste disposal sites have been seriously contaminated from the chemicals and other polluting materials that are disposed off. Our present study is concentrated on modeling one transient Heated Soil Vapor Extraction System and predicting the time required for effective remediation. The process developed by Advanced Remedial Technology, consists of a heating source pipe and the extraction well embedded in the soil. The number of heat source pipes and the extraction wells depends on the type of soil, the type of pollutants, moisture content of the soil and the size of the area to be cleaned. The heat source heats the soil, which is transported in the interior part of the soil by means of conduction and convection. This heating of soil results in vaporization of the gases, which are then driven out of the soil by the extraction well. The extraction well consists of the blower which would suck the vaporized gases out of the system. A three-dimensional meshed geometry was developed using gambit. Different boundary conditions were used for heating and suction well and for other boundaries. Concentrations of different chemicals were collected from the actual site and this data was used as an initial condition. The analysis uses the species transport and discrete phase modeling to predict the time required to clean the soil under specific conditions. This analysis could be used for predicting the changes of chemical concentrations in the soil during the remediation process. This will give us more insight to the physical phenomena and serve as a numerical predictive tool for more efficient process.

Steady State Analysis of Heated Soil Vapor Extraction Process With Air Sparging

2005 ◽  
Author(s):  
P. M. Mohan Das ◽  
R. S. Amano ◽  
T. Roy ◽  
J. Jatkar
Keyword(s):  
Extraction Process ◽  
Soil Vapor Extraction ◽  
Air Sparging ◽  
Saturated Zone ◽  
Vapor Extraction ◽  
Combined System ◽  
Discrete Phase Modeling ◽  
Discrete Phase ◽  
Time Required ◽  
Heated Soil

Heated Soil Vapor Extraction (HSVE), developed by Advanced Remedial Technology is a Soil remediation process that has gained significant attention during the past few years. HSVE along with Air sparging has been found to be an effective way of remediating soil of various pollutants including solvents, fuels and Para-nuclear aromatics. The combined system consists of a heater/boiler that pumps and circulates hot oil through heating wells, a blower that helps to suck the contaminants out through the extraction well, and air sparging wells that extend down to the saturated region in the soil. Both the heating wells and extraction wells are installed vertically in the saturated region in contaminated soil and is welded at the bottom and capped at the top. The heat source heats the soil and the heat is transported inside the soil by means of conduction and convection. This heating of soil results in vaporization of the gases, which are then absorbed by the extraction well. Soil vapor extraction cannot remove contaminants in the saturated zone of the soil that lies below the water table. In that case air sparging may be used. In air sparging system, air is pumped into the saturated zone to help flush the contaminants up into the unsaturated zone where the contaminants are removed by SVE well. In this analysis an attempt has been made to predict the behavior of different chemicals in the unsaturated and saturated regions of the soil. This analysis uses the species transport and discrete phase modeling to predict the behavior of different chemicals when it is heated and absorbed by the extraction well. Such an analysis will be helpful in predicting the parameters like the distance between the heating and extraction wells, the temperature to be maintained at the heating well and the time required for removing the contaminants from the soil.

Transient Analysis of Heated Soil Vapor Extraction Process With Air Sparging

2005 ◽  
Author(s):  
P. M. Mohan Das ◽  
R. S. Amano ◽  
T. Roy ◽  
J. Jatkar
Keyword(s):  
Extraction Process ◽  
Soil Vapor Extraction ◽  
Air Sparging ◽  
Saturated Zone ◽  
Vapor Extraction ◽  
Combined System ◽  
Discrete Phase Modeling ◽  
Discrete Phase ◽  
Time Required ◽  
Heated Soil

This paper presents the Heated Soil Vapor Extraction (HSVE) that has gained significant attention during the past few years. HSVE along with Air sparging has been found to be an effective way of remediating soil of various pollutants including solvents, fuels and Para-nuclear aromatics. The combined system consists of a heater/boiler that pumps and circulates hot oil through heating wells, a blower that helps to suck the contaminants out through the extraction well, and air sparging wells that extend down to the saturated region in the soil. Both the heating wells and extraction wells are installed vertically in the saturated region in contaminated soil and is welded at the bottom and capped at the top. With this technology the soil is heated by means of conduction and convection. This heating of soil results in vaporization of the gases, which are then absorbed by the extraction well. Soil vapor extraction cannot remove contaminants in the saturated zone of the soil that lies below the water table. In that case air sparging may be used. In air sparging system, air is pumped into the saturated zone to help flush the contaminants up into the unsaturated zone where the contaminants are removed by SVE well. In this analysis an attempt has been made to predict the behavior of different chemicals in the unsaturated and saturated regions of the soil. This analysis uses the species transport and discrete phase modeling to predict the behavior of different chemicals when it is heated and absorbed by the extraction well. Such an analysis will be helpful in predicting the parameters like the distance between the heating and extraction wells, the temperature to be maintained at the heating well and the time required for removing the contaminants from the soil.

scholarly journals Breaking Seed Dormancy during Dry Storage: A Useful Tool or Major Problem for Successful Restoration via Direct Seeding?

Plants ◽  
2020 ◽  
Vol 9 (5) ◽  
pp. 636 ◽  
Author(s):  
Carol C. Baskin ◽  
Jerry M. Baskin
Keyword(s):  
Seed Dormancy ◽  
Research Effort ◽  
Storage Period ◽  
Cost Effective ◽  
Seed Moisture Content ◽  
Dry Storage ◽  
Seed Moisture ◽  
Physiological Dormancy ◽  
Breaking Seed Dormancy ◽  
Time Required

To facilitate the restoration of disturbed vegetation, seeds of wild species are collected and held in dry storage, but often there is a shortage of seeds for this purpose. Thus, much research effort is expended to maximize the use of the available seeds and to ensure that they are nondormant when sown. Sowing nondormant (versus dormant) seeds in the field should increase the success of the restoration. Of the various treatments available to break seed dormancy, afterripening, that is, dormancy break during dry storage, is the most cost-effective. Seeds that can undergo afterripening have nondeep physiological dormancy, and this includes members of common families such as Asteraceae and Poaceae. In this review, we consider differences between species in terms of seed moisture content, temperature and time required for afterripening and discuss the conditions in which afterripening is rapid but could lead to seed aging and death if storage is too long. Attention is given to the induction of secondary dormancy in seeds that have become nondormant via afterripening and to the biochemical and molecular changes occurring in seeds during dry storage. Some recommendations are made for managing afterripening so that seeds are nondormant at the time for sowing. The most important recommendation probably is that germination responses of the seeds need to be monitored for germinability/viability during the storage period.

Using digital data collection tools to improve overall cost-efficiency and provide timely analysis for decision making during invasive species eradication campaigns

2014 ◽  
Vol 41 (6) ◽  
pp. 499 ◽  
Author(s):  
David J. Will ◽  
Karl J. Campbell ◽  
Nick D. Holmes
Keyword(s):  
Decision Making ◽  
Data Collection ◽  
Cost Efficiency ◽  
Relational Databases ◽  
Cost Effective ◽  
Digital Data ◽  
Capital Costs ◽  
Project Costs ◽  
Time Required ◽  
Data Collection Effort

Context Worldwide, invasive vertebrate eradication campaigns are increasing in scale and complexity, requiring improved decision making tools to achieve and validate success. For managers of these campaigns, gaining access to timely summaries of field data can increase cost-efficiency and the likelihood of success, particularly for successive control-event style eradications. Conventional data collection techniques can be time intensive and burdensome to process. Recent advances in digital tools can reduce the time required to collect and process field information. Through timely analysis, efficiently collected data can inform decision making for managers both tactically, such as where to prioritise search effort, and strategically, such as when to transition from the eradication phase to confirmation monitoring. Aims We highlighted the advantages of using digital data collection tools, particularly the potential for reduced project costs through a decrease in effort and the ability to increase eradication efficiency by enabling explicit data-informed decision making. Methods We designed and utilised digital data collection tools, relational databases and a suite of analyses during two different eradication campaigns to inform management decisions: a feral cat eradication utilising trapping, and a rodent eradication using bait stations. Key results By using digital data collection during a 2-year long cat eradication, we experienced an 89% reduction in data collection effort and an estimated USD42 845 reduction in total costs compared with conventional paper methods. During a 2-month rodent bait station eradication, we experienced an 84% reduction in data collection effort and an estimated USD4525 increase in total costs. Conclusions Despite high initial capital costs, digital data collection systems provide increasing economics as the duration and scale of the campaign increases. Initial investments can be recouped by reusing equipment and software on subsequent projects, making digital data collection more cost-effective for programs contemplating multiple eradications. Implications With proper pre-planning, digital data collection systems can be integrated with quantitative models that generate timely forecasts of the effort required to remove all target animals and estimate the probability that eradication has been achieved to a desired level of confidence, thus improving decision making power and further reducing total project costs.

A Preliminary Study of the Blade Erosion for a Wind Turbine Operating in a Dusty Environment

2016 ◽  
Author(s):  
Ahmed Hossam El-Din ◽  
Aya Diab
Keyword(s):  
Leading Edge ◽  
Particle Collision ◽  
Turbine Engines ◽  
Surface Erosion ◽  
Coal Slurry ◽  
Predictive Tool ◽  
Ansys Fluent ◽  
Flow Parameters ◽  
Discrete Phase Modeling ◽  
Discrete Phase

The process of surface erosion due to particle collision has been the focus of a number of investigations with regards to gas turbine engines, aircraft, reentry missiles, pipelines carrying coal slurry, etc. Recently, increased interest in wind energy by countries in the Saharan regions of the Middle East and North Africa (MENA) brings about some concern about leading edge erosion of wind turbines operating under such dusty conditions. Leading edge erosion can have a detrimental impact on the extracted energy as it changes the blade surface roughness causing premature/unpredictable separation. Though erosion may not be easily avoided; it may be mitigated via using airfoil families characterized by low roughness sensitivity. In this paper, a model of an airfoil erosion subjected to sand blasting is developed using the discrete phase modeling capability in ANSYS-FLUENT along with the DNV erosion model. The effect of various flow parameters, such as angle of attack, and particle size, on the extent of erosion is investigated for a number of airfoil designs. The developed model is used as a predictive tool to assess the power deterioration of eroded wind blades.

Laser-Based Measurement of Over Dimensional Freight Rail Shipments

2012 ◽  
Author(s):  
Bryan W. Schlake ◽  
Brian S. Daniel ◽  
Ron Voorheis
Keyword(s):  
Measurement System ◽  
Human Error ◽  
Cost Effective ◽  
Measuring System ◽  
Prototype System ◽  
Reference Target ◽  
Potential Benefits ◽  
Multiple Measurements ◽  
Current Measuring ◽  
Time Required

In pursuit of improved safety, Norfolk Southern Corp. (NS) has partnered with Amberg Technologies to explore the potential benefits of a laser-based measurement system for measuring over dimensional freight rail shipments. Shipments that do not fall within a standard geometric envelope, denoted as Plate B in the Association of American Railroads (AAR) Open Top Loading Rules [1], are considered to be over dimensional, or High-Wide Loads (HWLs). Extending beyond the limits of the Plate B diagram, these loads are not permitted in unrestricted interchange service. Instead, they must be measured both at points of origin and at interchange points. For US Class I Railroads, the de facto method for measuring HWLs requires mechanical personnel to either climb on the equipment or use a ladder and physically measure the overall height and width of the load. Using a tape measure, plumb line, and 6-foot level, car inspectors, or carmen, must often make multiple measurements to determine the height or width of a critical point on the load. The summation of these measurements can be subject to mathematical human error. In addition to the inherent limitations with regards to accuracy and efficiency, this method of measurement presents considerable safety challenges. The objective of the project was to develop a portable, cost-effective and accurate measurement system to improve the day-to-day operational process of measuring HWLs and reduce human exposure to railyard hazards. Norfolk Southern worked closely with Amberg Technologies to provide a clear overview of the current measuring methods, requirements, challenges and risks associated with HWLs. Amberg then developed a prototype system (with patent pending) and successful tests have been completed at both a point of origin for NS shipments and at a location where HWLs are received at interchange. The measuring system consists of a tripod mounted laser, a specially designed track reference target (TRT) and software designed specifically for HWL measurements. The system allows car inspectors to take measurements from a safe, strategic location away from the car. As a result, this system eliminates the need to climb on the equipment or a ladder and greatly reduces the amount of time spent on and around live tracks. In addition, initial tests indicate that this technology reduces the labor time required to measure HWLs by as much as one half while improving measurement accuracy. These tests have demonstrated that a laser-based system has the potential to greatly improve the safety, efficiency and accuracy associated with measuring HWLs.

Mature Field Economic Rejuvenation with Infill and Re-Entry Multilateral Well Creation Techniques

2021 ◽  
Author(s):  
Benjamin Butler ◽  
Justin Roberts ◽  
Matthew Kelsey ◽  
Steffen Van Der Veen
Keyword(s):  
Case Studies ◽  
Field Performance ◽  
Cost Effective ◽  
High Water ◽  
Additional Time ◽  
Flow Management ◽  
Performance Improvements ◽  
Mature Field ◽  
Water Cut ◽  
Time Required

Abstract Multilateral wells have been proven over decades and have developed into a reliable and cost effective approach to mature field rejuvenation and extended commercial viability. This paper will discuss case studies demonstrating a number of techniques used to create infill multilateral wells in existing fields with a high level of reliability and repeatability. Techniques reviewed will cover cutting and pulling production casing to drill and case a new mainbore versus sidetracking and adding laterals to an existing mainbore. Discussion will also cover completion designs that tie new laterals into existing production casing providing significantly greater reservoir contact. Temporary isolation of high water-cut laterals brought into production later in the well's life through bespoke completion designs will also be discussed. Case studies will include discussion of workover operations, isolation methods, and lateral creation systems. Where available, resulting field performance improvements will also be discussed. In Norway, slot recoveries are commonly performed by cutting and pulling the 10-3/4" casing, redrilling a new mainbore, and running new casing. This enables junction placement closer to unswept zones and easier lateral drilling to targets. It does have drawbacks, however, related to the additional time required to pull the subsea xmas tree and challenges associated with pulling casing. In 2019, Norway successfully completed a 10-3/4" retrofit installation, whereas a sidetrack was made from the 10-3/4" and an 8-5/8" expandable liner was run down into the reservoir pay zone where two new laterals were created. The 8-5/8" liner saved time otherwise spent having to drill the section down to the payzone from the laterals. These wells have a TAML Level 5 isolated junction, Autonomous Inflow Control Devices (AICDs) in each lateral, and an intelligent completion interface across the junction, enabling active flow management and monitoring of both branches. In Asia, infill laterals were added to existing wellbores by sidetracking 9-5/8" casing and tying production back to the original mainbore. These dual laterals were completed with intelligent completions to enable lateral flow management and monitoring of both laterals. In Australia, dual laterals were created in a similar fashion; laterals are added to existing wells; however, a novel approach was used to manage water from existing lower mainbore laterals whereby they are shut in at completion and opened later when the new lateral is watered out. The older lateral now produces at lower water cut given the time allowed for water coning in the lateral to relax. Using this practice, production is alternated back and forth between the two laterals. In the Middle East, an older well has been converted from TAML Level 4 to Level 5 in order to prevent detected gas migrating into the mainbore at the junction. This conversion of a cemented junction well has enabled production to resume on this well. The well was converted to incorporate an intelligent completion to enable flow control of each lateral. This paper intends to provide insights into the various mature field re-entry methods for multilateral well construction, and a review of the current technology capabilities and well designs through the review of multiple case histories.

scholarly journals Research Progress and Key Issues of Hydrodebenzylation of Hexabenzylhexaazaisowurtzitane (HBIW) in the Synthesis of High Energy Density Material Hexanitrohexaazaisowurtzitane (HNIW)

Materials ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 409
Author(s):  
Xiaofei Tang ◽  
Rui Zhu ◽  
Tianjing Shi ◽  
Yu Wang ◽  
Xiaochen Niu ◽  
...  
Keyword(s):  
Energy Density ◽  
High Performance ◽  
Research Effort ◽  
Specific Impulse ◽  
Cost Effective ◽  
High Energy ◽  
High Energy Density ◽  
Research Progress ◽  
Fourth Generation ◽  
Key Issues

High energy density materials (HEDM) are the subject of an extensive research effort in relation to the use of these compounds as components of rocket propellants, powders, and formulations of high-performance explosives. Hexanitrohexaazaisowurtzitane (HNIW, i.e., CL-20) has received much attention in these research fields for its specific impulse, burning rate, ballistics, and detonation velocity. In this paper, the development and performances of the explosives from the first to the fourth generation are briefly summarized, and the synthesis status of the fourth-generation explosive, HNIW, is reviewed. The key issues that restrict the development of industrial amplification synthesis of HNIW are analyzed, and the potential directions of development are proposed. It is pointed out that to synthesize new and efficient catalysts is the key to making the cost-effective manufacturing of CL-20 a reality.

scholarly journals How to Implement Safe, Efficient and Cost-Effective SARS-CoV-2 Testing in Urban and Rural Schools within One Month

COVID ◽  
2021 ◽  
Vol 1 (4) ◽  
pp. 717-727
Author(s):  
Parastoo Kheiroddin ◽  
Magdalena Gründl ◽  
Michael Althammer ◽  
Patricia Schöberl ◽  
Linda Plail ◽  
...  
Keyword(s):  
Data Transfer ◽  
Cost Effective ◽  
Testing System ◽  
Successful Implementation ◽  
Rural And Urban ◽  
Local Involvement ◽  
Working Day ◽  
Set Up ◽  
The Individual ◽  
Time Required

(1) Background: With vaccination and new variants of SARS-CoV-2 on the horizon, efficient testing in schools may enable prevention of mass infection outbreaks, keeping schools safe places and buying time until decisions on feasibility and the necessity of vaccination in children and youth are made. We established, in the course of the WICOVIR (Where Is the COrona VIRus) study, that gargle-based pool-PCR testing offers a feasible, efficient, and safe testing system for schools in Germany when applied by central university laboratories. (2) Objectives: We evaluated whether this approach can be implemented in different rural and urban settings. (3) Methods: We assessed the arrangements required for successful implementation of the WICOVIR approach in a variety of settings in terms of transport logistics, data transfer and pre-existing laboratory set-up, as well as the time required to establish the set-up. (4) Results: We found that once regulatory issues have been overcome, all challenges pertaining to logistics, data transfer, and laboratory testing on different platforms can be solved within one month. Pooling and depooling of samples down to the individual test result were achievable within one working day in all settings. Local involvement of the community and decentralized set-ups were keys for success. (5) Conclusion: The WICOVIR gargle-based pool-PCR system is so robust and simple that it can be implemented within one month in all settings now or in future pandemics.

Sign in / Sign up

Export Citation Format

Share Document