The Experimental Study on a Bistable Piezoelectric-Electromagnetic Combined Vibration Energy Harvester

2017 ◽  
Author(s):  
Ming Hui Yao ◽  
Peng Fei Liu ◽  
Wei Zhang ◽  
Dong Xing Cao
Keyword(s):  
Power Generation ◽  
Cantilever Beam ◽  
Nonlinear Dynamic ◽  
Energy Harvester ◽  
Maximum Output ◽  
Frequency Bandwidth ◽  
Effective Frequency ◽  
Generation Efficiency ◽  
Dynamic Behaviors ◽  
Piezoelectric Cantilever

This paper presents an experimental investigation on the bistable piezoelectric electromagnetic combined energy harvester based on vibration. The end of the piezoelectric cantilever beam has a tip magnet. The opposite of the piezoelectric cantilever beam has a coil, a spring and a magnet. The power generation efficiency and dynamic behaviors for three different kinds of the piezoelectric cantilever beam structures are experimentally studied, such as the conventional piezoelectric cantilever beam, the bistable piezoelectric cantilever beam introduced spring and magnet, and the bistable piezoelectric cantilever beam introduced spring, magnet and coil. Experimental results show that the introduction of the spring and magnet improves the maximum output voltage and broaden the effective frequency bandwidth. The power generation efficiency of the system is improved by adding the coil. Complicated nonlinear dynamic behaviors occur in the system, when the spring and the magnet are introduced. These nonlinear dynamic behaviors broaden the effective frequency bandwidth.

scholarly journals Nonlinear Dynamics and Power Generation on a New Bistable Piezoelectric-Electromagnetic Energy Harvester

Complexity ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-29
Author(s):  
Minghui Yao ◽  
Pengfei Liu ◽  
Hongbo Wang
Keyword(s):  
Power Generation ◽  
Cantilever Beam ◽  
Energy Harvester ◽  
Electromagnetic Energy ◽  
Generation Efficiency ◽  
Dynamic Behaviors ◽  
Optimal Load ◽  
Piezoelectric Cantilever ◽  
Generation Structure ◽  
Electromagnetic Harvester

This paper focuses power generation and nonlinear dynamic behaviors on a new bistable piezoelectric-electromagnetic energy harvester. Three different kinds of piezoelectric cantilever beam structures, which include the monostable piezoelectric cantilever beam, the bistable piezoelectric cantilever beam with spring and magnet, and the bistable piezoelectric cantilever beam with spring, magnet, and coil, are designed. The power generation efficiency and dynamic behaviors for each structure are experimentally studied, respectively. Due to the spring introduced, the system easily goes through the potential barrier. Experimental results show that the power generation structure of the bistable piezoelectric-electromagnetic harvester can vibrate between two steady states in a wider range of the frequency. Therefore, the effective frequency bandwidth is broadened about 2 Hz when the spring is introduced under the condition of the suitable magnetic distance. Comparing with the power generation efficiency for three different kinds of structures, it is found that the bistable piezoelectric-electromagnetic harvester has the optimum characteristics, which include the optimal magnetic distance of 15 mm, the optimal load of 8 MΩ, and the parameters variation law of coils. For this structure, the influences of the external excitation and the magnetic distance on the output voltage and dynamic behaviors of the system are examined.

Experimental Study on Power Generation and Dynamical Behavior of the Cantilevered Piezoelectric Beam With the Unilateral Layer Separate

2017 ◽  
Author(s):  
Wei Xia ◽  
Ming Hui Yao ◽  
Wei Zhang
Keyword(s):  
Power Generation ◽  
Dynamical Behavior ◽  
Laminated Composite ◽  
Frequency Bandwidth ◽  
Effective Frequency ◽  
Generation Efficiency ◽  
Peak Voltage ◽  
Voltage Output ◽  
Piezoelectric Beam ◽  
Composite Layers

This paper investigates the complicated dynamic behavior and power generation efficiency of the cantilevered laminated composite piezoelectric beam with the unilateral layer separate. The effect of the external excitation on the voltage output, the impacts of the layered length of composite layers and the influence of the magnetic distance on the voltage output and the effective frequency bandwidth are examined. Simultaneously, the output voltage and the effective frequency bandwidth of the traditional cantilevered laminated composite piezoelectric beam are measured experimentally to verify the developed model. The amplitude of the harmonic excitation is given the certain value and is not changed. Experimental results show that the developed structure has lower natural frequency, great voltage output and great effective frequency bandwidth when the length of the separate parts between composite layers is in the range. For the different layered lengths of the developed bistable piezoelectric beam, there exist the optimal magnetic distance and an optimal layered length, respectively. The power generation efficiency of the developed bistable piezoelectric beam is better than that of the developed monostable piezoelectric beam. When the layered length of the separate parts between composite layers is optimal, the voltage output of the piezoelectric beam has four peak voltages. In addition, the power generation efficiency of the developed structure are superior to that of the traditional one. The maximum peak voltage of this structure is 6.73 times than that of the traditional piezoelectric beam, and its effective frequency bandwidth promotes 8.4 times.

Performance Analysis for a Wave Energy Harvester of Piezoelectric Cantilever Beam

2019 ◽  
Vol 83 (sp1) ◽  
pp. 976
Author(s):  
Ming Liu ◽  
Hengxu Liu ◽  
Hailong Chen ◽  
Yuanchao Chai ◽  
Liquan Wang
Keyword(s):  
Performance Analysis ◽  
Cantilever Beam ◽  
Wave Energy ◽  
Energy Harvester ◽  
Piezoelectric Cantilever

Characterizing the Effective Bandwidth of Tri-Stable Energy Harvesters

2016 ◽  
Author(s):  
Meghashyam Panyam ◽  
Mohammed F. Daqaq
Keyword(s):  
Magnetic Field ◽  
Analytical Solutions ◽  
Energy Harvester ◽  
Multiple Scales ◽  
Method Of Multiple Scales ◽  
Experimental Studies ◽  
Effective Bandwidth ◽  
Frequency Bandwidth ◽  
Effective Frequency ◽  
Energy Harvesters

This paper aims to investigate the response and characterize the effective frequency bandwidth of tri-stable vibratory energy harvesters. To achieve this goal, the method of multiple scales is utilized to construct analytical solutions describing the amplitude and stability of the intra- and inter-well dynamics of the harvester. Using these solutions, critical bifurcations in the parameter’s space are identified and used to define an effective frequency bandwidth of the harvester. A piezoelectric tri-stable energy harvester consisting of a uni-morph cantilever beam is considered. Stiffness nonlinearities are introduced into the harvesters design by applying a static magnetic field near the tip of the beam. Experimental studies performed on the harvester are presented to validate some of the theoretical findings.

scholarly journals A Nonlinear Broadband Electromagnetic Vibration Energy Harvester Based on Double-Clamped Beam

Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2710 ◽  
Author(s):  
Zhuang Lu ◽  
Quan Wen ◽  
Xianming He ◽  
Zhiyu Wen
Keyword(s):  
Resonant Frequency ◽  
Analytical Model ◽  
Energy Harvester ◽  
Maximum Output Power ◽  
Average Power ◽  
Vibration Energy ◽  
Maximum Output ◽  
Frequency Bandwidth ◽  
Vibration Energy Harvester ◽  
Electromagnetic Vibration

The performance of vibration energy harvesters is usually restricted by their frequency bandwidth. The double-clamped beam with strong natural nonlinearity is a simple way that can effectively expand the frequency bandwidth of the vibration energy harvester. In this article, a nonlinear electromagnetic vibration energy harvester with monostable double-clamped beam was proposed. A systematic analysis was conducted and a distributed parameter analytical model was established. On this basis, the output performance was estimated by the analytical model. It was found that the nonlinearity of the double-clamped beam had little influence on the maximum output, while broadening the frequency bandwidth. In addition, the resonant frequency, the frequency bandwidth, and the maximum output all increased following the increase of excitation level. Furthermore, the resonant frequency varies with the load changes, due to the electromagnetic damping, so the maximum output power should be gained at its optimum load and frequency. To experimentally verify the established analytical model, an electromagnetic vibration energy harvester demonstrator was built. The prediction by the analytical model was confirmed by the experiment. As a result, the open-circuit voltage, the average power and the frequency bandwidth of the electromagnetic vibration energy harvester can reach up to 3.6 V, 1.78 mW, and 11 Hz, respectively, under only 1 G acceleration, which shows a prospect for the application of the electromagnetic vibration energy harvester based on a double-clamped beam.

A self-tunable wind energy harvester utilising a piezoelectric cantilever beam with bluff body under transverse galloping for field deployment

2021 ◽  
Vol 245 ◽  
pp. 114559
Author(s):  
Yee Yan Lim ◽  
Ricardo Vasquez Padilla ◽  
Andreas Unger ◽  
Rodrigo Barraza ◽  
Ahmed Mostafa Thabet ◽  
...  
Keyword(s):  
Wind Energy ◽  
Cantilever Beam ◽  
Bluff Body ◽  
Energy Harvester ◽  
Piezoelectric Cantilever ◽  
Field Deployment ◽  
Transverse Galloping

Investigation on a broadband magnetic levitation energy harvester for railway scenarios

2021 ◽  
pp. 1045389X2110263
Author(s):  
Shoutai Li ◽  
Yifeng Wang ◽  
Mingjin Yang ◽  
Yuhua Sun ◽  
Fei Wu ◽  
...  
Keyword(s):  
Power Generation ◽  
Output Voltage ◽  
Energy Harvester ◽  
Magnetic Levitation ◽  
Maximum Output ◽  
Control Factors ◽  
Generation Capacity ◽  
Vibration Tests ◽  
Full Factorial ◽  
The Magnetic Field

In this study, a Magnetic Levitation Energy Harvester (MLEH) was designed and fabricated. The magnetic field distribution and power generation performance of multiple cylindrical magnets were studied. The full factorial design (FFD) of L20 (22 × 5) test was carried out with the sliding magnet arrangement, coil arrangement and wiring method as the control factors, and the output power as target factor. Sweeping-frequency vibration tests and railroad spectrum random vibration tests were conducted to verify the power generation capacity of the prototype. Experimental results show that the device has a broadband response and the railroad vibration test proves the effectiveness of harvester in the application scenario for powering the rail-side sensors. The range of maximum output voltage, power and corresponding frequency in sweeping-frequency vibration tests with the amplitude of 1 to 10 mm and frequency of 5 to 50 Hz are 1.5 to 4.5 V; 1.80 to 17.0 mW and 9.7 to 30.8 Hz. The maximum output voltage and power are 1.33 V and 1.47 mW based on the measured railroad spectrum. Finally, a retrospective review in the efficiency, effectiveness and volume figure of merit is conducted to evaluate the performance of MLEH, indicating a high power density of the proposed harvester.

scholarly journals A Piezoelectric Wave Energy Harvester Using Plucking-Driven and Frequency Up-Conversion Mechanism

Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8441
Author(s):  
Shao-En Chen ◽  
Ray-Yeng Yang ◽  
Zeng-Hui Qiu ◽  
Chia-Che Wu
Keyword(s):  
Wave Energy ◽  
Energy Harvester ◽  
Electrical Power ◽  
Composite Beams ◽  
Gear Train ◽  
Piezoelectric Composite ◽  
Maximum Output ◽  
Resistive Load ◽  
Cantilever Beams ◽  
Piezoelectric Cantilever

In this study, a plucking-driven piezoelectric wave energy harvester (PDPWEH) consisted of a buoy, a gear train frequency up-conversion mechanism, and an array of piezoelectric cantilever beams was developed. The gear train frequency up-conversion mechanism with compact components included a rack, three gears, and a geared cam provide less energy loss to improve electrical output. Six individual piezoelectric composite beams were plucked by geared cam to generate electrical power in the array of piezoelectric cantilever beams. A sol-gel method was used to create the piezoelectric composite beams. To investigate PDPWEH, a mathematical model based on the Euler–Bernoulli beam theory was derived. The developed PDPWEH was tested in a wave flume. The wave heights were set to 100 and 75 mm, the wave periods were set to 1.0, 1.5, and 2.0 s. The maximum output voltage of the measured value was 12.4 V. The maximum RMS voltage was 5.01 V, which was measured by connecting to an external 200 kΩ resistive load. The maximum average electrical power was 125.5 μw.

A MEMS Piezoelectric Cantilever Beam Array for Vibration Energy Harvesting

2013 ◽  
Vol 562-565 ◽  
pp. 1052-1057 ◽  
Author(s):  
Xing Qiang Zhao ◽  
Zhi Yu Wen ◽  
Li Cheng Deng ◽  
Guo Xi Luo ◽  
Zheng Guo Shang ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Resonance Frequency ◽  
Cantilever Beam ◽  
Maximum Output Power ◽  
Vibration Energy ◽  
Cmos Process ◽  
Maximum Output ◽  
Vibration Energy Harvesting ◽  
Beam Array ◽  
Piezoelectric Cantilever

A micro piezoelectric cantilever beam array is designed for vibration energy harvesting. A single degree of freedom analytical model is developed to predict the properties of the device and is verified by finite element method. The piezoelectric material Aluminum Nitride was chosen for the compatibility with the CMOS process. The devices consisting of 5 piezoelectric cantilever beams and one proof mass were fabricated using micromachining technology. The resonance frequency, voltage and power were tested at excitation acceleration of 5.0 g. The maximum output power of the device is 9.13 μW at the resonance frequency of 1315 Hz when piezoelectric beams are connected in parallel.

Sign in / Sign up

Export Citation Format

Share Document