Evaluation of the Algorithmic Error of New Specification Tools for an ISO 14405-1:2016 Size

2018 ◽  
Author(s):  
Ibtissem Jbira ◽  
Antoine Tahan ◽  
Mohamed Ali Mahjoub ◽  
Borhen Louhichi
Keyword(s):  
Part Quality ◽  
Coordinate Metrology ◽  
Circularity Error ◽  
Industrial Performance ◽  
Geometric Quality ◽  
Measurement And Evaluation ◽  
Final Inspection ◽  
High Degree ◽  
Metrology System

Due to machine tool imprecisions during manufacturing, the actual product cannot be the same as the nominal model. The product’s geometric variations influence the geometrical requirements of functionality and assembly [6, 8]; this remains a problem of industrial performance and plays a major role in the quality and cost of products; hence the need for a reliable strategy to evaluate errors in the final inspection of part quality. Among all the geometric characteristics, the circular characteristic is very common on most parts. Therefore, the measurement and evaluation of circularity with a high degree of accuracy is of utmost importance. Size, form and orientation are the basic descriptors of the geometric quality of the objects. The recent publication of ISO 14405-1: 2016 defines the size as the fundamental geometric descriptor; it described a new set of specification tools for the size of part characteristics that directly apply to the ideal geometry of the component [13]. These tools present new challenges for an inspector using a coordinate metrology system. The study of the influence of form defects on the identification of dimensional and geometrical requirements seems necessary. This paper studies four modifiers ISO 14405-1:2016 (Minimum circumscribed size (GN), Maximum recorded size (GX), least squares size Minimum (GG) and Minimum area (MZ)) will be studied. This paper presents simple and effective algorithms for evaluating the circularity error of a large number of points using four specification modifiers of ISO 14405-1:2016, and a study on the influence of measurement system strategies on different algorithms for the evaluation of these new specifications. An analysis software was developed to compare the sensitivity of different parameters (number of points, noise amplitude and circularity defect) on ISO 14405-1:2016 modifiers.

scholarly journals Adaptive Stretch-Forming Process: A Computer Vision and Statistical Analysis Approach

Machines ◽  
2021 ◽  
Vol 9 (12) ◽  
pp. 357
Author(s):  
Cosmin Constantin Grigoras ◽  
Valentin Zichil ◽  
Bogdan Chirita ◽  
Vlad Andrei Ciubotariu
Keyword(s):  
Computer Vision ◽  
Classical Method ◽  
Industrial Process ◽  
Industrial Sector ◽  
Production Costs ◽  
Stretch Forming ◽  
Forming Process ◽  
Part Quality ◽  
High Degree

An industrial process is defined through its quality of parts and their production costs. Labour-intensive operations must be applied to produce high-quality components with inexpensive resources. Recent development in dedicated software allows the industrial sector to rely on more and more autonomous solutions to obtain an optimum ratio between part quality and cost. The stretch forming process is an operation that has a high degree of difficulty, due to the process parameters and the spring-back effect of materials. Our approach to solving several of the shortcomings of this process was to develop a self-adaptive algorithm with computer vision capabilities that adapts to the process in real-time. This experimental study highlights the results obtained using this method, as well as a comparison to a classical method for the stretch-forming process (SFP). The results have noted that the stretch-forming algorithm improves the process, while adapting its decisions with each step.

Агрономическая эффективность промышленной (голландской) технологии возделывания картофеля

2018 ◽  
Author(s):  
C. Coy ◽  
A.V. Shuravilin ◽  
O.A. Zakharova
Keyword(s):  
Heavy Metals ◽  
Regression Analysis ◽  
Positive Response ◽  
Growth Yield ◽  
Correlation And Regression Analysis ◽  
Yield And Quality ◽  
Quality Of Products ◽  
High Degree ◽  
The Impact

Приведены результаты исследований по изучению влияния промышленной технологии возделывания картофеля на развитие, урожайность и качество продукции. Выявлена положительная реакция растений на подкормку K2SO4 в период посадки. Корреляционно-регрессионный анализ урожайности и качества клубней выявил высокую степень достоверности результатов опыта. Содержание нитратов и тяжелых металлов в клубнях было ниже допустимых величин.The results of studies on the impact of industrial technology of potato cultivation on growth, yield and quality of products. There was a positive response of plants to fertilizer K2SO4 in the period of planting. Correlation and regression analysis of yield and quality of tubers revealed a high degree of reliability of the results of experience. The contents of nitrates and heavy metals in tubers was below the permissible values.

Analysis of the influence of the hole depth on the geometric quality of the machined part, when the cutting fluid and the machining parameters are varied

2017 ◽  
Author(s):  
Eder Silva Costa ◽  
Pedro Henrique Pires França ◽  
Leonardo Rosa Ribeiro da Silva ◽  
Wisley Sales ◽  
Álisson Rocha Machado ◽  
...  
Keyword(s):  
Cutting Fluid ◽  
Machining Parameters ◽  
Hole Depth ◽  
Geometric Quality

Current Progress in Biomedical Applications of Chitosan-Carbon Nanotube Nanocomposites: A Review

2020 ◽  
Vol 20 (16) ◽  
pp. 1619-1632
Author(s):  
Katarzyna Pieklarz ◽  
Michał Tylman ◽  
Zofia Modrzejewska
Keyword(s):  
Carbon Nanotube ◽  
Medical Science ◽  
Antimicrobial Properties ◽  
Polymer Materials ◽  
Biological Macromolecules ◽  
Medical Sciences ◽  
New Generation ◽  
High Degree ◽  
Dressing Materials

The currently observed development of medical science results from the constant search for innovative solutions to improve the health and quality of life of patients. Particular attention is focused on the design of a new generation of materials with a high degree of biocompatibility and tolerance towards the immune system. In addition, apart from biotolerance, it is important to ensure appropriate mechanical and technological properties of materials intended for intra-body applications. Knowledge of the above parameters becomes the basis for considerations related to the possibilities of choosing the appropriate polymer materials. The researchers' interest, as evidenced by the number of available publications, is attracted by nanobiocomposites based on chitosan and carbon nanotubes, which, due to their properties, enable integration with the tissues of the human body. Nanosystems can be used in many areas of medicine. They constitute an excellent base for use as dressing materials, as they exhibit antimicrobial properties. In addition, they can be carriers of drugs and biological macromolecules and can be used in gene therapy, tissue engineering, and construction of biosensors. For this reason, potential application areas of chitosan-carbon nanotube nanocomposites in medical sciences are presented in this publication, considering the characteristics of the system components.

scholarly journals The Neural Basis of Vivid Memory Is Patterned on Perception

2012 ◽  
Vol 24 (9) ◽  
pp. 1867-1883 ◽  
Author(s):  
Bradley R. Buchsbaum ◽  
Sabrina Lemire-Rodger ◽  
Candice Fang ◽  
Hervé Abdi
Keyword(s):  
Brain Activity ◽  
Sensory Perception ◽  
Direct Perception ◽  
Neural Basis ◽  
Activation Patterns ◽  
Short Video ◽  
Initial Perception ◽  
Experiential Quality ◽  
High Degree

When we have a rich and vivid memory for a past experience, it often feels like we are transported back in time to witness once again this event. Indeed, a perfect memory would exactly mimic the experiential quality of direct sensory perception. We used fMRI and multivoxel pattern analysis to map and quantify the similarity between patterns of activation evoked by direct perception of a diverse set of short video clips and the vivid remembering, with closed eyes, of these clips. We found that the patterns of distributed brain activation during vivid memory mimicked the patterns evoked during sensory perception. Using whole-brain patterns of activation evoked by perception of the videos, we were able to accurately classify brain patterns that were elicited when participants tried to vividly recall those same videos. A discriminant analysis of the activation patterns associated with each video revealed a high degree (explaining over 80% of the variance) of shared representational similarity between perception and memory. These results show that complex, multifeatured memory involves a partial reinstatement of the whole pattern of brain activity that is evoked during initial perception of the stimulus.

scholarly journals Measuring spatial price differentials at the basic heading level: a comparison of stochastic index number methods

2021 ◽  
Author(s):  
Sebastian Weinand
Keyword(s):  
Price Level ◽  
Consumer Price Index ◽  
Index Number ◽  
Price Data ◽  
Estimation Efficiency ◽  
Spatial Price ◽  
Price Comparisons ◽  
High Degree ◽  
The Impact

AbstractSpatial price comparisons rely to a high degree on the quality of the underlying price data that are collected within or across countries. Below the basic heading level, these price data often exhibit large gaps. Therefore, stochastic index number methods like the Country–Product–Dummy (CPD) method and the Gini–Eltetö–Köves–Szulc (GEKS) method are utilised for the aggregation of the price data into higher-level indices. Although the two index number methods produce differing price level estimates when prices are missing, the present paper demonstrates that both can be derived from exactly the same stochastic model. For a specific case of missing prices, it is shown that the formula underlying these price level estimates differs between the two methods only in weighting. The impact of missing prices on the efficiency of the price level estimates is analysed in two simulation studies. It can be shown that the CPD method slightly outperforms the GEKS method. Using micro data of Germany’s Consumer Price Index, it can be observed that more narrowly defined products improve estimation efficiency.

CHARACTERIZATION AND ELECTRICAL PROPERTIES OF ALIGNED CARBON NANOTUBES WITH HIGH ASPECT RATIO

2011 ◽  
Vol 10 (01n02) ◽  
pp. 23-28
Author(s):  
RAVI BHATIA ◽  
V. PRASAD ◽  
M. REGHU
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Aspect Ratio ◽  
Multiwall Carbon Nanotubes ◽  
High Quality ◽  
Transmission Electron Microscopy Analysis ◽  
Transmission Electron ◽  
Electron Microscopy Analysis ◽  
High Degree

High-quality multiwall carbon nanotubes (MWNTs) were produced by a simple one-step technique. The production of MWNTs was based on thermal decomposition of the mixture of a liquid phase organic compound and ferrocene. High degree of alignment was noticed by scanning electron microscopy. The aspect ratio of as-synthesized MWNTs was quite high (more than 4500). Transmission electron microscopy analysis showed the presence of the catalytic iron nanorods at various lengths of MWNTs. Raman spectroscopy was used to know the quality of MWNTs. The ratio of intensity of the G-peak to the D-peak was very high which revealed high quality of MWNTs. Magnetotransport studies were carried out at low temperature and a negative MR was noticed.

Impactul activităților umane asupra stării peisajelor geografice din bazinul hidografic Cogâlnic în anii 2004-2014

2020 ◽  
Author(s):  
Nicolae Boboc ◽  
◽  
Valentina Munteanu ◽  
Keyword(s):  
Statistical Data ◽  
Environmental Changes ◽  
Spatial Dynamics ◽  
Anthropogenic Pressure ◽  
Human Pressure ◽  
Republic Of Moldova ◽  
Temporal And Spatial ◽  
The Republic ◽  
High Degree

The high degree of land use in the Republic of Moldova as a whole, and the Cogâlnic river basin in particular, imposes the need to assess the quality of the environment and the characteristics of the anthropogenic pressure on the landscapes in temporal and spatial dynamics and to identifying an adequate of measure system for the purpose to maintain/restore the optimal structure and functioning of landscape systems. Based from the Land Cadastre on data, statistical data of population censuses, bibliographic and cartographic sources, a system, was appraised a system of indicators(of naturalness, of artificialization of landscapes, environmental changes) and quantified human pressure on the environment through agriculture and anthropogenic pressure on forest landscapes from the Cogâlnic catchment area. The values of the indices and the human pressure on the landscapes were processed using GIS techniques and elaborated cartographic models.

scholarly journals Perspectives approach to the assessment of the quality of the vaccine plague live in terms of immunogenicity. Epidemiology and Vaccinal Prevention

2019 ◽  
Vol 18 (1) ◽  
pp. 50-54
Author(s):  
S. E. Gostischeva ◽  
N. V. Abzaeva ◽  
E. L. Rakitina ◽  
D. G. Ponomarenko ◽  
M. V. Kostuchenko ◽  
...  
Keyword(s):  
Specific Antigen ◽  
Water Soluble ◽  
Control Group ◽  
In Vitro Tests ◽  
Laboratory Mice ◽  
Early Activation ◽  
High Degree ◽  
Stimulation Of

Research objective–studying of a possibility of application antigen – stimulated cellular in vitro tests and technology of the cytometric analysis for control of immunogene activity of batches of vaccine plague live.Materials and methods.As biomodels used white laboratory mice, immunized commercial medicine of vaccine of the plague NIIEG line, live from a strain of Yersinia pestis EV, in doses – 8 х 102, 4 х 103, 2 х 104 and 1 х 105 of living microbic cells. Blood for a research was taken from intact mice and on 7, 14 and 21 days after immunization. The intensity of an antigenreaktivnost of lymphocytes was defined in cellular in vitro tests, analyzing a marker of early activation (CD45+CD3+CD25+) of lymphocytes with use of the monoclonal antibodies conjugated from fluorokhroma. As specific antigen used a complex of water-soluble antigens of a plague microbe.Results.As a result of a research it is shown that at the animals vaccinated by doses 4 х 103 – 1 х 105 living microbic cells, the highest level of an expression activation marker lymphocytes at anti-gene stimulation of in vitro is registered on 14 days after immunization, at the same time the quantity of CD25 – positive lymphocytes are on average 6.8 times higher, than in control group. High degree of direct link (coefficient of correlation of r = 1,000) quantities of the survived animals with increase in level of lymphocytes, expressiruyushchy markers of early activation – CD25 is established.Conclusions.The offered technique can be used as the additional test when studying degree of immunogenicity of new (kandidatny) vaccines against plague.

scholarly journals COMPARATIVE QUALITY ASSESSMENT OF ROOT CANAL PREPARATION WITH DIFFERENT SYSTEMS OF ENDODONTIC INSTRUMENTS

2020 ◽  
Vol 73 (6) ◽  
pp. 1145-1148
Author(s):  
Maryna A. Goray ◽  
Nataliia G. Gadzhula ◽  
Olena V. Muntian ◽  
Olena L. Cherepakha ◽  
Larysa F. Kurdysh
Keyword(s):  
Root Canal ◽  
Canal System ◽  
Universal Group ◽  
Root Canals ◽  
Root Canal System ◽  
High Degree ◽  
Dentine Surface ◽  
Apical Area

The aim: To compare the quality of root canal system preparation with the use of manual K-files, machine Protaper Universal and Silk files by in vitro studies. Materials and methods: Root canals preparation in 45 extracted premolars was performed in three groups with 15 teeth in each with K-files, Protaper Universal and Silk files. Transverse sections of the dental root were prepared. Histologically were assessed: amount of sawdust and predentin remaining, the purity degree of root canal walls. Results: When calculating the sawdust amount at the distance of 3 mm from an apex, a high degree of contamination was observed in the manual K-file group: 53.3% versus 33.3% in the Protaper Universal group and against 20.0% in the Silk file group. The amount of predentin after root canal treatment with manual files reached 25-30%. At the distance of 5 mm from the apex the root canals with high and medium purity degree were detected in 86.7% with Silk files and 80.0% with Protaper Universal files used. All predentin was removed when working with Protaper Universal and Silk files. Conclusions: In the histological sections of the root canals treated with K-files, the larger amount of dentine particles and predentin has been revealed than when using machine tools. The largest amount of predentin and dentine were removed with Protaper Universal files. Silk endodontic system is better for treatment of the root canals dentine surface in the apical area compared to Protaper Universal and K-files.

Sign in / Sign up

Export Citation Format

Share Document