Analysis of a Latent Heat Storage Device With Radial Fins

2013 ◽  
Author(s):  
Y. Kozak ◽  
T. Rozenfeld ◽  
G. Ziskind
Keyword(s):  
Heat Transfer ◽  
Phase Change ◽  
Latent Heat ◽  
Close Contact ◽  
Thermal Storage ◽  
Ambient Air ◽  
Contact Melting ◽  
Storage Device ◽  
Melting Time ◽  
Cfd Model

Phase-change materials (PCMs) can store large amounts of heat without significant change of their temperature during the phase-change process. This effect may be utilized in thermal energy storage, especially for solar-thermal power plants. In order to enhance the rate of heat transfer into PCMs, one of the most common methods is the use of fins which increase the heat transfer area that is in contact with the PCM. The present work deals with a latent heat thermal storage device that uses a finned tube with an array of radial fins. A heat transfer fluid (HTF) flows through the tube and heat is conducted from the tube to the radial fins that are in contact with the bulk of the PCM inside a cylindrical shell. The thermal storage charging/discharging process is driven by a hot/cold HTF inside the tube that causes the PCM to melt/solidify. The main objective of the present work is to demonstrate that close-contact melting (CCM) can affect the storage unit performance. Accordingly, two different types of experiments are conducted: with the shell exposed to ambient air and with the shell submerged into a heated water bath. The latter is done to separate the PCM from the shell by a thin molten layer, thus enabling the solid bulk to sink. The effect of the solid sinking and close-contact melting on the fins is explored. It is found that close-contact melting shortens the melting time drastically. Accordingly, two types of models are used to predict the melting rate: numerical CFD model and analytical/numerical close-contact melting model. The CFD model takes into account convection in the melt and the PCM property dependence on temperature and phase. The analytical/numerical CCM model is developed under several simplifying assumptions. Good agreement is found between the predictions and corresponding experimental results.

Thermal Conductivity Enhancement in a Latent Heat Storage Device

2013 ◽  
Vol 860-863 ◽  
pp. 590-593
Author(s):  
Cha Xiu Guo ◽  
Ding Bao Wang ◽  
Gao Lin Hu
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Solid State ◽  
Liquid Phase ◽  
Phase Change ◽  
Latent Heat ◽  
Heat Storage ◽  
Storage Device ◽  
Latent Heat Storage ◽  
Conductivity Enhancement

High conductivity porosity materials are proposed to enhance the phase change materials (PCM) in order to solve the problem of low conductivity of PCM in the latent heat storage device (LHSD), and two-dimensional numerical simulation is conducted to predict the performance of the PCM by CFD software. During the phase change process, the PCM is heated from the solid state to the liquid phase in the process of melting and from the liquid phase to the solid state in the solidification process. The results show that porosity materials can improve heat transfer rate effectively, but the effect of heat transfer of Al foam is superior to that of graphite foam although the heat storage capacity is almost the same for both. The heat transfer is enhanced and the solidification time of PCM is decreased since the effective thermal conductivity of composite PCM is increased.

The Heat Charge and Discharge Characteristics Simulation of Phase Change Thermal Storage Device

2011 ◽  
Vol 179-180 ◽  
pp. 239-242
Author(s):  
Hai Chuan Tian ◽  
Feng Xu ◽  
Guo Li Yang ◽  
Teng Fei Wu
Keyword(s):  
Heat Transfer ◽  
Phase Change ◽  
Heat Storage ◽  
Thermal Storage ◽  
Storage Device ◽  
Transfer Model ◽  
Two Dimensional ◽  
Unsteady Heat Transfer ◽  
Discharge Characteristics ◽  
Release Property

The two-dimensional unsteady heat transfer model is been established. Analyzing on heat storage-release property of phase change thermal storage device within the fluid parallel spiral pipes in various conditions, suggestions are put forward to strengthen thermal storage for the device.

scholarly journals Analysis of Heat Transfer and Natural Convective of a Phase Change Material

2021 ◽  
Vol 9 (VII) ◽  
pp. 3028-3037
Author(s):  
T. Ravi Kumar
Keyword(s):  
Heat Transfer ◽  
Phase Change ◽  
Phase Change Material ◽  
Latent Heat ◽  
Heat Storage ◽  
Storage Device ◽  
Latent Heat Storage ◽  
Recovery System ◽  
Solid Liquid ◽  
Change Material

A phase-change material (PCM) is a substance with a high latent heat storage capacity which on melting and solidifying at a certain temperature, is capable of storing and releasing large amounts of energy. Various PCM like Paraffin wax, stearic acid are considered which are used to absorb heat from the coolant water from the engine. The conduction and convection criterion of heat transfer enable the PCM to store this heat as latent heat. The amount of convection and temperature change brought about due to the heat flux has been simulated and studied in detail using FLUENT. The thermal energy storage device (TESD) works on the effect of absorption and rejection of heat during the solid-liquid phase change of heat storage material. The overall function of the TESS is dominated by the PCM. The PCM material should be selected considering the application and the working conditions. Depending on the applications, the PCMs should first be selected based on their melting temperature for heat recovery system.

Numerical Investigation of the Melting of a Phase Change Material in a Thermal Storage Device With Embedded Air Flow Channels

2016 ◽  
Author(s):  
Mustafa Koz ◽  
Hamza S. Erden ◽  
H. Ezzat Khalifa
Keyword(s):  
Heat Transfer ◽  
Phase Change ◽  
Phase Change Material ◽  
Air Flow ◽  
Melting Process ◽  
Thermal Storage ◽  
Time Dependent ◽  
Storage Device ◽  
Aluminum Tubes ◽  
Change Material

Two time-dependent mathematical and numerical models with different levels of complexity and fidelity were developed to investigate the melting of a phase change material (PCM) configured as a number of aluminum-encased, PCM-filled slabs with embedded micro-channel aluminum tubes, and with parallel air-flow passages interposed between the slabs. Melting was first analyzed with the COMSOL Multiphysics® finite-element model (FEM) in a 2-D domain representing a full-size slab. The melting process is simulated via the apparent heat capacity method. The model captures the effect of natural convection in the PCM melt as well as the conjugate heat transfer through the aluminum tubes. A fast-executing quasi 2-D reduced-order model (ROM) was developed for repetitive design optimization studies. The ROM relies on a time-dependent 1-D closed-form solution of the heat conduction equation in a melting PCM, coupled with variations of the air temperature and heat transfer coefficient. Consequently, the FEM results were employed to develop corrections to the ROM. The corrected ROM was then utilized to study the melting process in a multi-slab thermal storage device that is designed to freeze the PCM at night and release 500 W-h of cooling over a span of ∼10 h during the day.

A Novel Double-Pipe Heat Storage Unit

2016 ◽  
Author(s):  
A. Rozenfeld ◽  
Y. Kozak ◽  
T. Rozenfeld ◽  
G. Ziskind
Keyword(s):  
Heat Transfer ◽  
Heat Storage ◽  
Solid Phase ◽  
Close Contact ◽  
Contact Melting ◽  
Melting Time ◽  
Water Tank ◽  
Storage Unit ◽  
Double Pipe ◽  
Pipe Heat

This research is an experimental investigation of a double-pipe heat storage unit. The inner pipe of the unit, through which a heat-transfer fluid (HTF) is supplied, is made of aluminum and has an outer helix-like fin. The annular space between the pipes is filled with a phase change material (PCM). Actually, this research presents a novel design of the heat storage unit, which, unlike traditional designs with e.g. radial (circumferential) or longitudinal fins, has a single fin which does not divide the shell volume into separated cells. Moreover, this research focuses on close-contact melting (CCM), a process which is characterized by detachment of the solid bulk from the unit envelope and its sinking towards the hot fin surface. In previous investigations, performed in our laboratory, this effect has been achieved in units with above-mentioned traditional fin configurations. It was demonstrated that CCM reduces the overall melting time, i.e. the rate of unit charging, significantly as compared with commonly encountered melting in which the fins serve just to enlarge the heat transfer area. The experimental system employed in this study includes a vertically-oriented double-pipe heat storage unit and thermostatic baths capable of providing hot or cold HTF. The unit has a transparent Perspex shell which makes visualization possible. The entire unit may be placed in a heated water tank with transparent walls. In the latter case, close-contact melting is achieved by detaching the solid phase from the envelope and thus allowing its gravity-induced motion. Regular melting is compared to CCM and advantages of the latter are demonstrated. Also demonstrated are the advantages of the novel fin, including in solidification. Possible mathematical and numerical modeling of the melting processes is discussed.

scholarly journals Latent Heat Phase Change Heat Transfer of a Nanoliquid with Nano–Encapsulated Phase Change Materials in a Wavy-Wall Enclosure with an Active Rotating Cylinder

2021 ◽  
Vol 13 (5) ◽  
pp. 2590
Author(s):  
S. A. M. Mehryan ◽  
Kaamran Raahemifar ◽  
Leila Sasani Gargari ◽  
Ahmad Hajjar ◽  
Mohamad El Kadri ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Phase Change ◽  
Latent Heat ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Wavy Wall ◽  
Governing Equations ◽  
Stefan Number ◽  
Change Material

A Nano-Encapsulated Phase-Change Material (NEPCM) suspension is made of nanoparticles containing a Phase Change Material in their core and dispersed in a fluid. These particles can contribute to thermal energy storage and heat transfer by their latent heat of phase change as moving with the host fluid. Thus, such novel nanoliquids are promising for applications in waste heat recovery and thermal energy storage systems. In the present research, the mixed convection of NEPCM suspensions was addressed in a wavy wall cavity containing a rotating solid cylinder. As the nanoparticles move with the liquid, they undergo a phase change and transfer the latent heat. The phase change of nanoparticles was considered as temperature-dependent heat capacity. The governing equations of mass, momentum, and energy conservation were presented as partial differential equations. Then, the governing equations were converted to a non-dimensional form to generalize the solution, and solved by the finite element method. The influence of control parameters such as volume concentration of nanoparticles, fusion temperature of nanoparticles, Stefan number, wall undulations number, and as well as the cylinder size, angular rotation, and thermal conductivities was addressed on the heat transfer in the enclosure. The wall undulation number induces a remarkable change in the Nusselt number. There are optimum fusion temperatures for nanoparticles, which could maximize the heat transfer rate. The increase of the latent heat of nanoparticles (a decline of Stefan number) boosts the heat transfer advantage of employing the phase change particles.

scholarly journals Experimental and Computational Investigations of Phase Change Thermal Energy Storage Canisters

2000 ◽  
Vol 122 (4) ◽  
pp. 176-182 ◽  
Author(s):  
Mounir Ibrahim ◽  
Pavel Sokolov ◽  
Thomas Kerslake ◽  
Carol Tolbert
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Phase Change ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Radiation Heat Transfer ◽  
Convection Heat Transfer ◽  
Melting Time ◽  
Radiation Heat ◽  
Space Experiments

Two sets of experimental data for cylindrical canisters with thermal energy storage applications were examined in this paper: 1) Ground Experiments and 2) Space Experiments. A 2-D computational model was developed for unsteady heat transfer (conduction and radiation) with phase-change. The radiation heat transfer employed a finite volume method. The following was found in this study: 1) Ground Experiments, the convection heat transfer is equally important to that of the radiation heat transfer; Radiation heat transfer in the liquid is found to be more significant than that in the void; Including the radiation heat transfer in the liquid resulted in lower temperatures (about 15 K) and increased the melting time (about 10 min.); Generally, most of the heat flow takes place in the radial direction. 2) Space Experiments, Radiation heat transfer in the void is found to be more significant than that in the liquid (exactly the opposite to the Ground Experiments); Accordingly, the location and size of the void affects the performance considerably; Including the radiation heat transfer in the void resulted in lower temperatures (about 40 K). [S0199-6231(00)00304-X]

scholarly journals Molten Salt Spectroscopy for Quantification of Radiative Absorption in Novel Metal Chloride-Enhanced Thermal Storage Media

2015 ◽  
Vol 137 (4) ◽  
Author(s):  
Philip D. Myers ◽  
D. Yogi Goswami ◽  
Elias Stefanakos
Keyword(s):  
Heat Transfer ◽  
Transition Metal ◽  
Melting Temperature ◽  
Latent Heat ◽  
Thermal Storage ◽  
Metal Chloride ◽  
Eutectic System ◽  
Metal Chlorides ◽  
Storage Media ◽  
Radiative Absorption

This study describes the development and characterization of novel high-temperature thermal storage media, based on inclusion of transition metal chlorides in the potassium–sodium chloride eutectic system, (K–Na)Cl (melting temperature of 657 °C, latent heat of 278 J/g). At the melting temperature of (K–Na)Cl, infrared (IR) radiation can play a major role in the overall heat transfer process—90% of spectral blackbody radiation falls in the range of 2–13 μm. The authors propose inclusion of small amounts (less than 0.2 wt.%) of IR-active transition metal chlorides to increase radiative absorption and thereby enhance heat transfer rates. A new IR-reflectance apparatus was developed to allow for determination of the spectral absorption coefficient of the newly formulated phase-change materials (PCMs) in the molten state. The apparatus consisted of an alumina crucible coated at the bottom with a reflective (platinum) or absorptive (graphite) surface, a heated ceramic crucible-holder, and a combination of zinc sulfide (ZnS) and zinc selenide (ZnSe) windows for containment of the salt and allowance of inert purge gas flow. Using this apparatus, IR spectra were obtained for various transition metal chloride additives in (K–Na)Cl and improved IR activity, and radiative transfer properties were quantified. Further, thermophysical properties relevant to thermal energy storage (i.e., melting temperature and latent heat) are measured for the pure and additive-enhanced thermal storage media.

Sign in / Sign up

Export Citation Format

Share Document