Comparative Analysis of Actuator Dimensioning Methods in Pneumatics

2021 ◽  
Author(s):  
Vladimir Boyko ◽  
Steffen Hülsmann ◽  
Jürgen Weber
Keyword(s):  
Energy Consumption ◽  
Design Tools ◽  
Calculation Methods ◽  
Dynamic Simulations ◽  
Protection Goals ◽  
Reduction Of Energy Consumption ◽  
Application Fields ◽  
Automation Technology ◽  
Algebraic Approaches ◽  
Force Equilibrium

Abstract In the modern automation technology, there are often two ways to complete a drive task: pneumatically or electrically. In order to remain competitive with the electromechanics and to contribute to the achievement of climate protection goals, manufacturers and users of pneumatic systems are required to increase the energy efficiency of pneumatics. One of the primal and simplest methods to reduce the energy consumption of existing and to-be-developed pneumatic systems is the correct sizing of actuators. However, even in the most modern machines drives are often overdimensioned thus creating a higher energy consumption than necessary. To counteract this, different dimensioning methods have been developed in the last few years, which could contribute to a significant reduction of energy consumption. Design tools based on dynamic simulations are highly reliable, but their calculation methods can be complex and non-transparent. Therefore, more pragmatic and simple dimensioning methods have been developed, based on algebraic approaches like force equilibrium, exergy equilibrium and pneumatic frequency ratio. In this paper these methods are evaluated using mathematical analysis and practical drive examples. Their possible application fields and limitations are shown and compared.

scholarly journals Mitigating the Energy Consumption and the Carbon Emission in the Building Structures by Optimization of the Construction Processes

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3287
Author(s):  
Alireza Tabrizikahou ◽  
Piotr Nowotarski
Keyword(s):  
Life Cycle ◽  
Energy Consumption ◽  
Structural Optimization ◽  
Carbon Emissions ◽  
Carbon Emission ◽  
Construction Materials ◽  
High Energy ◽  
Building Structures ◽  
Life Cycle Stages ◽  
Reduction Of Energy Consumption

For decades, among other industries, the construction sector has accounted for high energy consumption and emissions. As the energy crisis and climate change have become a growing concern, mitigating energy usage is a significant issue. The operational and end of life phases are all included in the building life cycle stages. Although the operation stage accounts for more energy consumption with higher carbon emissions, the embodied stage occurs in a time-intensive manner. In this paper, an attempt has been made to review the existing methods, aiming to lower the consumption of energy and carbon emission in the construction buildings through optimizing the construction processes, especially with the lean construction approach. First, the energy consumption and emissions for primary construction materials and processes are introduced. It is followed by a review of the structural optimization and lean techniques that seek to improve the construction processes. Then, the influence of these methods on the reduction of energy consumption is discussed. Based on these methods, a general algorithm is proposed with the purpose of improving the construction processes’ performance. It includes structural optimization and lean and life cycle assessments, which are expected to influence the possible reduction of energy consumption and carbon emissions during the execution of construction works.

scholarly journals Traffic Light Priority for Trams in Warsaw as a Tool for Transport Policy and Reduction of Energy Consumption

2021 ◽  
Vol 13 (8) ◽  
pp. 4180
Author(s):  
Andrzej Czerepicki ◽  
Tomasz Krukowicz ◽  
Anna Górka ◽  
Jarosław Szustek
Keyword(s):  
Control System ◽  
Energy Consumption ◽  
Electric Energy ◽  
Fixed Time ◽  
Pollutant Emissions ◽  
Computer Simulation Model ◽  
Traffic Light ◽  
Electric Energy Consumption ◽  
Time Control ◽  
Reduction Of Energy Consumption

The article presents an analysis of priority solutions for trams at a selected sequence of intersections in Warsaw (Poland). An analysis of the literature has shown the topicality of this issue. A computer simulation model of a coordinated sequence of intersections was constructed. Three test scenarios were designed: the existing control system, the new coordinated fixed-time control system, and the adaptive control system with active priority. In the simulation process, detailed travel characteristics of trams and other traffic participants in a selected section were obtained for the three varying scenarios. Electric energy consumption for traction needs and pollutant emissions was then estimated for each of the variants. It was concluded that for the analyzed configuration, implementation of the adaptive priority will result in a reduction of tram time losses by up to 25%, a reduction in energy consumption by up to 23%, and a reduction in the emission of pollutants from individual vehicles by up to 3% in relation to the original variant. The conducted research may be the basis for a comprehensive method of assessing the effectiveness of applying the adaptative priority when designing new tramway lines and modernizing the existing ones.

Identifying Perceived Barriers and Benefits to Reducing Energy Consumption in an Affordable Housing Complex

2016 ◽  
Vol 22 (3) ◽  
pp. 159-178 ◽  
Author(s):  
Dan Reaves ◽  
Caroline M. Clevenger ◽  
MaryEllen Nobe ◽  
Patricia A. Aloise-Young
Keyword(s):  
Energy Consumption ◽  
Affordable Housing ◽  
Low Income ◽  
Perceived Barriers ◽  
Community Based ◽  
Target Behaviors ◽  
Housing Complex ◽  
Two Phases ◽  
Reduction Of Energy Consumption ◽  
Reducing Energy

Reduction of energy consumption in the affordable housing sector is highly impacted by human behavior. However, only limited behavior change research exists that is aimed at reducing energy consumption in this sector. This study seeks to implement the first two phases of the community-based social marketing (CBSM) framework in an affordable housing setting. The goals of the research are to identify the optimal behaviors for energy reduction and to identify the perceived barriers and benefits associated with those behaviors in a low-income housing facility. The results of this study identify five target behaviors along with their barriers and benefits. In addition, the study identifies potential issues and nuances in the CBSM process that researchers should take into consideration during future implementations of CBSM in affordable housing environments.

scholarly journals Experimental Study on the Thermal Behavior of Exterior Coating Textures of Building in Hot and Arid Climates

2021 ◽  
Vol 13 (8) ◽  
pp. 4175
Author(s):  
Islam Boukhelkhal ◽  
Fatiha Bourbia
Keyword(s):  
Energy Consumption ◽  
Surface Temperature ◽  
External Surface ◽  
Thermal Characteristics ◽  
Energy Performance ◽  
Building Envelope ◽  
Interior Space ◽  
Design Elements ◽  
Aesthetic Appearance ◽  
Reduction Of Energy Consumption

The building envelope is the barrier between the interior and exterior environments. It has many important functions, including protecting the interior space from the climatic variations through its envelope materials and design elements, as well as reduction of energy consumption and improving indoor thermal comfort. Furthermore, exterior building sidings, in addition to their aesthetic appearance, can have useful textures for reducing solar gains and providing good thermal insulation performance. This research examined and evaluated the effect of external siding texture and geometry on energy performance. For this objective, a field in situ testing and investigation of surface temperature was carried out on four samples (test boxes) with different exterior textures and different orientations, under the climate zone of Constantine–Algeria during the summer period. The results indicated significant dependability between the exterior texture geometry, the percentage of shadow projected, and external surface temperature. The second part of the research involved a similar approach, exploring the effect of three types of particles with the same appearance but with different thermal characteristics. It was concluded that the natural plant aggregates “palm particles” had the best performance, which contributed to a significant reduction of external surface temperature reaching 4.3 °C, which meant decreasing the energy consumption.

Design and optimization of heating, cooling and lightening systems for a residential villa at Saman city, Iran

2019 ◽  
Vol 17 (1) ◽  
pp. 41-52 ◽  
Author(s):  
Javad Riahi Zaniani ◽  
Shahab Taghipour Ghahfarokhi ◽  
Mehdi Jahangiri ◽  
Akbar Alidadi Shamsabadi
Keyword(s):  
Energy Consumption ◽  
Light Intensity ◽  
Design Methodology ◽  
Climatic Conditions ◽  
Content Type ◽  
Design And Optimization ◽  
Simulation Results ◽  
Annual Reduction ◽  
Reduction Of Energy Consumption ◽  
Heating Loads

Purpose This paper, using energy softwares, designed of Iran and optimized a residential villa in Saman city located in Chaharmahal and Bakhtiari Province. Design/methodology/approach Having used the ideas of Climate Consultant software, the basic designing was conducted by Design Builder Software, and the cooling and heating loads and lighting tools and equipment were calculated. Then, the amount of consuming of heating, cooling and lighting load of the building was optimized through insulation of walls and ceiling, using green roof, double glazing UPVC windows, light intensity sensor and variable refrigerant flow (VRF) system. Findings Simulation results for the stated scenarios showed an annual reduction in energy consumption of 21.1, 7.9, 26.41, 27.3 and 72.3 per cent, respectively. Also, by combining all the five scenarios, an optimal state was achieved which, from the results, brought about an annual reduction of 86.9 per cent in the energy consumption. Originality/value The authors hope that the results of the current paper could be helpful for designers and engineers in reduction of energy consumption for designing a building in similar climatic conditions.

Sign in / Sign up

Export Citation Format

Share Document