Technical Considerations for Development of Policy and Approvals for In-Water Cleaning of Ship Biofouling

Submerged ship surfaces are often inhabited by diverse sessile and sedentary marine organisms, which can directly impact vessel operations and increase the likelihood of non-indigenous species (NIS) establishment and impacts. Ship in-water cleaning (IWC) systems are now being incorporated into biofouling policy, and rigorous, transparent, and predictive verification testing is vital to regulatory success. Performance criteria for IWC approval should focus on environmental protection goals by including: qualified and independent testing; quantitative, robust, and statistically sound data, rather than qualitative observations; water sampling at all critical control points to characterize the release of harmful materials, including dissolved and particulate biocides; measurable and protective endpoints, rather than percent reductions; determinations of presence or absence of macro-organisms, irrespective of species origins or physiological state; and appropriately trained IWC operators.

Adult children’s goals as predictors of communication satisfaction with their parent: The moderating roles of inferences of the parent’s goals and future time perspective of the parent

Adult children ( N = 245, MAge = 50.55 years, 62.0% women, 80.0% European American) reported on their own prosocial goals during typical interactions with their parent, inferences of their parent’s prosocial goals, assessment of their parent’s future, and general communication satisfaction in their relationship with their parent. Prosocial goals were considered as social support goals and relationship protection goals. The study examined how children’s own prosocial goals predicted children’s general communication satisfaction, as well as how children’s inferences of their parent’s goals and future time perspective of their parent moderated these associations. The associations between children’s own goals and children’s communication satisfaction were positive (1) when children inferred that their parent held the same goals and perceived their parent’s future as restricted, or (2) when children inferred that their parent held relatively low levels of the goals and perceived their parent’s future as expansive. The study illuminates the contingencies under which children’s goals predict children’s general communication satisfaction.

Foundation and Prospects of Wild Population Reconstruction of Acipenser dabryanus

Acipenser dabryanus is an endemic fish inhabiting the upper reaches of the Yangtze River in China. It is classified as a first-class nationally protected animal in China and is listed in the International Union for Conservation of Nature (IUCN) Red List of Critically Endangered Species (CR). Recently, there has been a decrease in natural reproduction of A. dabryanus, and the wild population is almost extinct. This paper summarizes the changes observed in the natural population of A.dabryanus and the factors leading to its endangerment. Based on the process of artificial propagation and achievement of relevant protection goals, this paper presents the concept and technical framework for reconstruction of the wild population of A. dabryanus. In addition, by comprehensively reviewing the research findings and existing problems in the resource protection and monitoring of A. dabryanus in recent years, we assessed the possibility of wild population reconstruction and resource restoration for A. dabryanus. Reconstruction and restoration measures for the wild population of A. dabryanus are proposed, with the aim of providing a scientific basis for the reconstruction of the natural population and the improvement and restoration of critical habitat of this species. Furthermore, it is hoped that this paper will serve as a reference for the protection and restoration of other endangered fishes.

Downcycling and Upcycling in Rehabilitation and Adaptive Reuse of Pre-Existing Buildings: Re-Designing Technological Performances in an Environmental Perspective

The abandonment of the built heritage, as a result of functional or technological obsolescence or as a consequence of cultural, social, and economic trends, is steadily increasing. This great number of buildings, worldwide spread, offers a huge opportunity to reduce the environmental impacts related to the construction industry. Nonetheless, the recovery and reuse interventions that require the implementation of residual technological performance, to accommodate new uses, are not always environmentally neutral. Therefore, a new design approach needs to be developed so as to improve the buildings’ technological performance and enhance resources and energy already incorporated in buildings. The circular economy principles in the building sector, performance-based building design together with downcycling and upcycling theories are applied to develop a methodology aiming to reduce the environmental impacts within the rehabilitation and refurbishment design process. Starting from the building analysis phase (historical, material, construction) residual performance is evaluated; then the design phase demonstrates that, according to downcycling and upcycling design strategies applied on building components and materials, it is possible improving the building to the required new uses while minimizing transformations and effectively reducing related environmental impacts. The reduction of environmental impacts depends on a careful assessment of the residual technological and structural performance that the building still provides, by involving limited performance implementations to balance rehabilitation needs and environmental protection goals.

Comparative Analysis of Actuator Dimensioning Methods in Pneumatics

In the modern automation technology, there are often two ways to complete a drive task: pneumatically or electrically. In order to remain competitive with the electromechanics and to contribute to the achievement of climate protection goals, manufacturers and users of pneumatic systems are required to increase the energy efficiency of pneumatics. One of the primal and simplest methods to reduce the energy consumption of existing and to-be-developed pneumatic systems is the correct sizing of actuators. However, even in the most modern machines drives are often overdimensioned thus creating a higher energy consumption than necessary. To counteract this, different dimensioning methods have been developed in the last few years, which could contribute to a significant reduction of energy consumption. Design tools based on dynamic simulations are highly reliable, but their calculation methods can be complex and non-transparent. Therefore, more pragmatic and simple dimensioning methods have been developed, based on algebraic approaches like force equilibrium, exergy equilibrium and pneumatic frequency ratio. In this paper these methods are evaluated using mathematical analysis and practical drive examples. Their possible application fields and limitations are shown and compared.

Cooperative- and Eco-Driving: Impact on Fuel Consumption for Heavy Trucks on Hills

Greenhouse gas emissions are the cause of climate change, which in turn has a negative impact on people and the environment. Reducing the fuel consumption of conventional engines reduces climate-damaging emissions and can, thus, contribute to achieving climate protection goals. In addition, fuel costs are a major cost factor for long-haul trucking. Eco-driving helps to reduce fuel costs when driving on inclines and declines. Due to the high mass and, therefore, high kinetic and potential energy of heavy trucks, fuel can be saved by coasting before slopes and before speed limits. However, energy-efficient and non-cooperative driving, i.e., without considering other road users, can lead to increased fuel consumption as vehicles impede each other. To resolve conflicts in road traffic, a variety of methods that enable cooperative driving exist. In general, vehicles communicate with vehicle-to-everything (V2X) and negotiate a joint driving strategy. This paper presents a method that combines cooperative and energy-efficient driving and examines the impact on fuel consumption during uphill driving. The method relies on the exchange of trajectories for cooperative maneuver coordination. By computing a strategic trajectory, energy-efficient driving with long coasting maneuvers is enabled. In the simulative evaluation, travel over hills with two and three trucks is investigated. It is shown that the combination of cooperative and eco-driving reduces the fuel costs for traffic.

Dynamic Impact of Environmental Regulation on Environmental Performance in China: New Evidence from a Semiparametric Additive Panel Analysis

Environmental protection is the core of sustainable economic development, and environmental policy plays a key role in achieving protection goals. Therefore, it is extremely crucial to evaluate the effectiveness of environmental policies. Existing studies mainly focus on the average impact of environmental policies on environmental pollution but ignore their dynamic impact, which is prone to misestimate the effect of environmental policies. To make up for the deficiency, a semiparametric additive panel data model is used to explore the dynamic impact of China’s sewage charging policy on environmental performance at each level of the levy. The results show that the relationship between sewage charge level and environmental degeneration is an “M-shaped” pattern, indicating that the current sewage charge policy is not absolutely effective. Moreover, the results also reveal an “N-shaped” linkage between economic growth and environmental pollution, indicating that economic development is not sustainable. Moreover, the factors of energy consumption, population growth, and industrialization contribute to increasing environmental degeneration. Although technological development has a positive impact on environmental performance, its impact is insignificant. This study could provide new evidence for strengthening environmental regulatory reform and promoting green economic development.

Secure and Privacy-Respecting Documentation for Interactive Manufacturing and Quality Assurance

The automated documentation of work steps is a requirement of many modern manufacturing processes. Especially when it comes to important procedures such as safety critical screw connections or weld seams, the correct and complete execution of certain manufacturing steps needs to be properly supervised, e.g., by capturing video snippets of the worker to be checked in hindsight. Without proper technical and organizational safeguards, such documentation data carries the potential for covert performance monitoring to the disadvantage of employees. Naïve documentation architectures interfere with data protection requirements, and thus cannot expect acceptance of employees. In this paper we outline use cases for automated documentation and describe an exemplary system architecture of a workflow recognition and documentation system. We derive privacy protection goals that we address with a suitable security architecture based on hybrid encryption, secret-sharing among multiple parties and remote attestation of the system to prevent manipulation. We finally contribute an outlook towards problems and possible solutions with regards to information that can leak through accessible metadata and with regard to more modular system architectures, where more sophisticated remote attestation approaches are needed to ensure the integrity of distributed components.

Shaped by the Rules. How Inducement Regulation Will Change the Investment Service Industry

Inducement regulation is intended to target the conflict of interests between financial advisors and their clients. Nonetheless, it may also represent a ‘public policy device’ meant to conform the activity of European distributors with investor protection goals; indeed, by selecting the conditions under which distributors can freely collect inducements, the European regulator simultaneously shapes the market for financial services. Accordingly, ‘spot advice’ (which poorly performed in the past) is indirectly banned by the quality-enhancement provision set forth in art. 24 MiFID II, and the acknowledged importance of on-going monitoring of the portfolio opens up the collection of inducements linked to the provision of ‘periodic advice’. Since this new regime will probably increase the overall costs of investment advice enlarging the ‘advice gap’, the European regulator tries also to foster the development of FinTech permitting the collection of inducements even outside the strict provision of investment advice. Nevertheless, the concerns regarding investor protection raised by FinTech services (which allow only a mere ‘self-assessment’ of the investor’s profile) suggest a broader interpretation of inducement regulation, with the purpose of enabling investment firms to provide low-cost financial advice capable of effectively encompassing every stage of the investment relationship, from the early assessment of clients’ characteristics and objectives to the on-going management of the investments (‘simplified advice’).

The Application of PRIMET For Pesticide Registration and Monitoring in Ethiopia

Pesticide registration is an activity often not supported with proper risk assessment procedures in developing countries like Ethiopia. In this study, we tried the PRIMET (Pesticide Risks in the Tropics for Man, Environment and Trade), a tool developed to assess the risks to non-target protection goals believed to assist the pesticide registration and monitoring activities in Ethiopia. For this study, seven pesticides (imdacloprid, difenoconazole, metalaxyl, dimethoate, thiamethoxam, nicosulfuron and bupirimate) were selected randomly and their data of physico-chemical characteristics, toxicological information and pesticide use were mined from either the information given on the dossier or PPDB (Pesticides Properties Database). Results indicated that imidacloprid, dimethoate and thiamethoxam are highly risky to bees when bee hives are present inside the field of the sprayed crop, while Thiamethoxam is highly risky at when hives are present in and off field crop situation. Another outcome was that imidacloprid and dimethoate are expected to have high acute risk for birds, while difenoconazole, metalaxyl, dimethoate showed high acute and chronic risks to the aquatic ecosystem, respectively. Future studies should give emphasis on how the results of risk assessment can be practical to help the registration processes and how the results are compared with actual measurement values.