Utilization of Modern Large Scale HAWT Blade Design Techniques for the Development of Small HAWT Blades

2014 ◽  
Author(s):  
G. Pechlivanoglou ◽  
G. Weinzierl ◽  
I. T. Masmanidis ◽  
C. N. Nayeri ◽  
T. P. Philippidis ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Rural Areas ◽  
Large Scale ◽  
Great Majority ◽  
Rotor Blades ◽  
Urban And Rural Areas ◽  
The University ◽  
Large Wind ◽  
Small Capacity

Lately the need for modern medium capacity wind turbines for self-consumption within urban and rural areas has risen again. The great majority however of the large wind turbine manufacturers are not interested in this small profit market. SMART BLADE GmbH in cooperation with the CORE Team of the University of Patras have decided to develop modern, sophisticated rotor blades with state of the art tools from the multi-MW wind turbine industry in order to boost the development of the upcoming modern small capacity wind turbines. The current paper presents the design of a modern 4m wind turbine blade with optimal aerodynamic design aimed at a variable speed hybrid stall operation.

scholarly journals Aerodynamic Analysis and Performance Prediction of VAWT and HAWT Using CARDAAV and Qblade Computer Codes

2021 ◽  
Author(s):  
Tayeb Brahimi ◽  
Ion Paraschivoiu
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Large Scale ◽  
Wind Farms ◽  
Rotor Blades ◽  
Dynamic Stall ◽  
And Performance ◽  
Control Stability ◽  
Induced Velocity

Wind energy researchers have recently invited the scientific community to tackle three significant wind energy challenges to transform wind power into one of the more substantial, low-cost energy sources. The first challenge is to understand the physics behind wind energy resources better. The second challenge is to study and investigate the aerodynamics, structural, and dynamics of large-scale wind turbine machines. The third challenge is to enhance grid integration, network stability, and optimization. This chapter book attempts to tackle the second challenge by detailing the physics and mathematical modeling of wind turbine aerodynamic loads and the performance of horizontal and vertical axis wind turbines (HAWT & VAWT). This work underlines success in the development of the aerodynamic codes CARDAAV and Qbalde, with a focus on Blade Element Method (BEM) for studying the aerodynamic of wind turbines rotor blades, calculating the induced velocity fields, the aerodynamic normal and tangential forces, and the generated power as a function of a tip speed ration including dynamic stall and atmospheric turbulence. The codes have been successfully applied in HAWT and VAWT machines, and results show good agreement compared to experimental data. The strength of the BEM modeling lies in its simplicity and ability to include secondary effects and dynamic stall phenomena and require less computer time than vortex or CFD models. More work is now needed for the simulation of wind farms, the influence of the wake, the atmospheric wind flow, the structure and dynamics of large-scale machines, and the enhancement of energy capture, control, stability, optimization, and reliability.

scholarly journals Optimal Design of Novel Blade Profile for Savonius Wind Turbines

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3484
Author(s):  
Tai-Lin Chang ◽  
Shun-Feng Tsai ◽  
Chun-Lung Chen
Keyword(s):  
Wind Energy ◽  
Drag Force ◽  
Wind Turbines ◽  
Rural Areas ◽  
Large Scale ◽  
Design Method ◽  
Angular Position ◽  
Vertical Axis ◽  
Blade Profile ◽  
Main Concept

Since the affirming of global warming, most wind energy projects have focused on the large-scale Horizontal Axis Wind Turbines (HAWTs). In recent years, the fast-growing wind energy sector and the demand for smarter grids have led to the use of Vertical Axis Wind Turbines (VAWTs) for decentralized energy generation systems, both in urban and remote rural areas. The goals of this study are to improve the Savonius-type VAWT’s efficiency and oscillation. The main concept is to redesign a Novel Blade profile using the Taguchi Robust Design Method and the ANSYS-Fluent simulation package. The convex contour of the blade faces against the wind, creating sufficient lift force and minimizing drag force; the concave contour faces up to the wind, improving or maintaining the drag force. The result is that the Novel Blade improves blade performance by 65% over the Savonius type at the best angular position. In addition, it decreases the oscillation and noise accordingly. This study achieved its two goals.

scholarly journals Sustainable End-of-Life Management of Wind Turbine Blades: Overview of Current and Coming Solutions

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1124
Author(s):  
Leon Mishnaevsky Mishnaevsky
Keyword(s):  
Wind Turbine ◽  
End Of Life ◽  
Wind Turbines ◽  
Natural Fiber ◽  
Turbine Blades ◽  
Wind Turbine Blades ◽  
Maintenance And Repair ◽  
Life Management ◽  
Large Wind

Various scenarios of end-of-life management of wind turbine blades are reviewed. “Reactive” strategies, designed to deal with already available, ageing turbines, installed in the 2000s, are discussed, among them, maintenance and repair, reuse, refurbishment and recycling. The main results and challenges of “pro-active strategies”, designed to ensure recyclability of new generations of wind turbines, are discussed. Among the main directions, the wind turbine blades with thermoplastic and recyclable thermoset composite matrices, as well as wood, bamboo and natural fiber-based composites were reviewed. It is argued that repair and reuse of wind turbine blades, and extension of the blade life has currently a number of advantages over other approaches. While new recyclable materials have been tested in laboratories, or in some cases on small or medium blades, there are remaining technological challenges for their utilization in large wind turbine blades.

scholarly journals Is global dimming and brightening in Japan limited to urban areas?

2016 ◽  
Author(s):  
Katsumasa Tanaka ◽  
Atsumu Ohmura ◽  
Doris Folini ◽  
Martin Wild ◽  
Nozomu Ohkawara
Keyword(s):  
Solar Radiation ◽  
Rural Areas ◽  
Urban Areas ◽  
Large Scale ◽  
Temporal Trends ◽  
Surface Radiation ◽  
Surface Solar Radiation ◽  
Decadal Time Scale ◽  
Global Dimming ◽  
Urban And Rural Areas

Abstract. Observations worldwide indicate secular trends of all-sky surface solar radiation on decadal time scale, termed global dimming and brightening. Accordingly, the observed surface radiation in Japan generally shows a strong decline till the end of the 1980s and then a recovery toward around 2000. Because a substantial number of measurement stations are located within or proximate to populated areas, one may speculate that the observed trends are strongly influenced by local air pollution and are thus not of large-scale significance. This hypothesis poses a serious question as to what regional extent the global dimming and brightening are significant: Are the global dimming and brightening truly global phenomena, or regional or even only local? Our study focused on 14 meteorological observatories that measured all-sky surface solar radiation, zenith transmittance, and maximum transmittance. On the basis of municipality population time series, historical land use maps, recent satellite images, and actual site visits, we concluded that eight stations had been significantly influenced by urbanization, with the remaining six stations being left pristine. Between the urban and rural areas, no marked differences were identified in the temporal trends of the aforementioned meteorological parameters. Our finding suggests that global dimming and brightening in Japan occurred on a large scale, independently of urbanization.

Simulation of Flow Field on a Large Scale Wind Turbine

2008 ◽  
Author(s):  
I. Janajreh ◽  
C. Ghenai
Keyword(s):  
Flow Field ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Cross Sections ◽  
Large Scale ◽  
Wind Farms ◽  
Operating Characteristics ◽  
Cross Sectional ◽  
Capital Costs

Large scale wind turbines and wind farms continue to evolve mounting 94.1GW of the electrical grid capacity in 2007 and expected to reach 160.0GW in 2010 according to World Wind Energy Association. They commence to play a vital role in the quest for renewable and sustainable energy. They are impressive structures of human responsiveness to, and awareness of, the depleting fossil fuel resources. Early generation wind turbines (windmills) were used as kinetic energy transformers and today generate 1/5 of the Denmark’s electricity and planned to double the current German grid capacity by reaching 12.5% by year 2010. Wind energy is plentiful (72 TW is estimated to be commercially viable) and clean while their intensive capital costs and maintenance fees still bar their widespread deployment in the developing world. Additionally, there are technological challenges in the rotor operating characteristics, fatigue load, and noise in meeting reliability and safety standards. Newer inventions, e.g., downstream wind turbines and flapping rotor blades, are sought to absorb a larger portion of the cost attributable to unrestrained lower cost yaw mechanisms, reduction in the moving parts, and noise reduction thereby reducing maintenance. In this work, numerical analysis of the downstream wind turbine blade is conducted. In particular, the interaction between the tower and the rotor passage is investigated. Circular cross sectional tower and aerofoil shapes are considered in a staggered configuration and under cross-stream motion. The resulting blade static pressure and aerodynamic forces are investigated at different incident wind angles and wind speeds. Comparison of the flow field results against the conventional upstream wind turbine is also conducted. The wind flow is considered to be transient, incompressible, viscous Navier-Stokes and turbulent. The k-ε model is utilized as the turbulence closure. The passage of the rotor blade is governed by ALE and is represented numerically as a sliding mesh against the upstream fixed tower domain. Both the blade and tower cross sections are padded with a boundary layer mesh to accurately capture the viscous forces while several levels of refinement were implemented throughout the domain to assess and avoid the mesh dependence.

scholarly journals Tourist Viewshed Externalities and Wind Energy Production

2017 ◽  
Vol 46 (2) ◽  
pp. 224-241 ◽  
Author(s):  
Jacob R. Fooks ◽  
Kent D. Messer ◽  
Joshua M. Duke ◽  
Janet B. Johnson ◽  
Tongzhe Li ◽  
...  
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Energy Production ◽  
Hotel Room ◽  
Negative Effect ◽  
The Impact ◽  
Large Wind

This study uses an experiment where ferry passengers are sold hotel room “views” to evaluate the impact of wind turbines views on tourists’ vacation experience. Participants purchase a chance for a weekend hotel stay. Information about the hotel rooms was limited to the quality of the hotel and its distance from a large wind turbine, as well as whether or not a particular room would have a view of the turbine. While there was generally a negative effect of turbine views, this did not hold across all participants, and did not seem to be effected by distance or hotel quality.

scholarly journals A Robot-Assisted Large-Scale Inspection of Wind Turbine Blades in Manufacturing Using an Autonomous Mobile Manipulator

2021 ◽  
Vol 11 (19) ◽  
pp. 9271
Author(s):  
Heiko Engemann ◽  
Patrick Cönen ◽  
Harshal Dawar ◽  
Shengzhi Du ◽  
Stephan Kallweit
Keyword(s):  
Wind Turbine ◽  
Rotor Blade ◽  
Large Scale ◽  
Turbine Blades ◽  
Rotor Blades ◽  
Mobile Manipulator ◽  
Wind Turbine Blades ◽  
Left Hand ◽  
Planning Strategy ◽  
Execution Strategy

Wind energy represents the dominant share of renewable energies. The rotor blades of a wind turbine are typically made from composite material, which withstands high forces during rotation. The huge dimensions of the rotor blades complicate the inspection processes in manufacturing. The automation of inspection processes has a great potential to increase the overall productivity and to create a consistent reliable database for each individual rotor blade. The focus of this paper is set on the process of rotor blade inspection automation by utilizing an autonomous mobile manipulator. The main innovations include a novel path planning strategy for zone-based navigation, which enables an intuitive right-hand or left-hand driving behavior in a shared human–robot workspace. In addition, we introduce a new method for surface orthogonal motion planning in connection with large-scale structures. An overall execution strategy controls the navigation and manipulation processes of the long-running inspection task. The implemented concepts are evaluated in simulation and applied in a real-use case including the tip of a rotor blade form.

scholarly journals Hardware-in-the-loop simulator of wind turbine emulator using labview

2019 ◽  
Vol 10 (2) ◽  
pp. 971
Author(s):  
Himani Himani ◽  
Navneet Sharma
Keyword(s):  
Wind Turbine ◽  
Condition Monitoring ◽  
Wind Turbines ◽  
Control Strategies ◽  
Hardware In The Loop ◽  
Data Acquisition Card ◽  
Terminal Voltage ◽  
The Uk ◽  
The University ◽  
University Of Manchester

<p><span>This paper describes the design and implementation of Hardware in the Loop (HIL) system D.C. motor based wind turbine emulator for the condition monitoring of wind turbines. Operating the HIL system, it is feasible to replicate the actual operative conditions of wind turbines in a laboratory environment. This method simply and cost-effectively allows evaluating the software and hardware controlling the operation of the generator. This system has been implemented in the LabVIEW based programs by using Advantech- USB-4704-AE Data acquisition card. This paper describes all the components of the systems and their operations along with the control strategies of WTE such as Pitch control and MPPT. Experimental results of the developed simulator using the test rig are benchmarked with the previously verified WT test rigs developed at the Durham University and the University of Manchester in the UK by using the generated current spectra of the generator. Electric subassemblies are most vulnerable to damage in practice, generator-winding faults have been introduced and investigated using the terminal voltage. This wind turbine simulator can be analyzed or reconfigured for the condition monitoring without the requirement of actual WT’s.</span></p>

scholarly journals LOADS ON WIND TURBINES ACCESS PLATFORMS WITH GRATINGS

2011 ◽  
Vol 1 (32) ◽  
pp. 65
Author(s):  
Thomas Lykke Andersen ◽  
Peter Frigaard ◽  
Michael R Rasmussen ◽  
Luca Martinelli
Keyword(s):  
Drag Coefficient ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Large Scale ◽  
Peak Load ◽  
Multiplication Factor ◽  
Preliminary Results ◽  
Different Types ◽  
The Many ◽  
Large Scale Tests

The present paper deals with loads on wind turbine access platforms. The many planned new wind turbine parks together with the observed damages on platforms in several existing parks make the topic very important. The paper gives an overview of recently developed design formulae for different types of entrance platforms. Moreover, the paper present new results on loads on grates based on both drag coefficient measurements and preliminary results on slamming from large scale tests. As expected both investigations show that platforms with grates give a significant reduction in the loads compared to closed plate platforms. The grate multiplication factor, defined as the peak load on the grate platform relative to the peak load on a closed plate platform was found approximately equal to the solidity of the grate.

scholarly journals Prognostics-based adaptive control strategy for lifetime control of wind turbines

2021 ◽  
Author(s):  
Edwin Kipchirchir ◽  
Manh Hung Do ◽  
Jackson Githu Njiri ◽  
Dirk Söffker
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Control Strategy ◽  
Fatigue Loading ◽  
Operational Reliability ◽  
Operating Conditions ◽  
Rotor Blades ◽  
Time Step ◽  
Damage Level ◽  
Structural Loading

Abstract. Variability of wind profiles in both space and time is responsible for fatigue loading in wind turbine components. Advanced control methods for mitigating structural loading in these components have been proposed in previous works. These also incorporate other objectives like speed and power regulation for above-rated wind speed operation. In recent years, lifetime control and extension strategies have been proposed to guaranty power supply and operational reliability of wind turbines. These control strategies typically rely on a fatigue load evaluation criteria to determine the consumed lifetime of these components, subsequently varying the control set-point to guaranty a desired lifetime of the components. Most of these methods focus on controlling the lifetime of specific structural components of a wind turbine, typically the rotor blade or tower. Additionally, controllers are often designed to be valid about specific operating points, hence exhibit deteriorating performance in varying operating conditions. Therefore, they are not able to guaranty a desired lifetime in varying wind conditions. In this paper an adaptive lifetime control strategy is proposed for controlled ageing of rotor blades to guaranty a desired lifetime, while considering damage accumulation level in the tower. The method relies on an online structural health monitoring system to vary the lifetime controller gains based on a State of Health (SoH) measure by considering the desired lifetime at every time-step. For demonstration, a 1.5 MW National Renewable Energy Laboratory (NREL) reference wind turbine is used. The proposed adaptive lifetime controller regulates structural loading in the rotor blades to guaranty a predefined damage level at the desired lifetime without sacrificing on the speed regulation performance of the wind turbine. Additionally, significant reduction in the tower fatigue damage is observed.

Sign in / Sign up

Export Citation Format

Share Document