Experimental and Numerical Investigation of the Flow in a LP Industrial Steam Turbine With Part-Span Connectors

2015 ◽  
Author(s):  
M. Häfele ◽  
C. Traxinger ◽  
M. Grübel ◽  
M. Schatz ◽  
D. M. Vogt ◽  
...  
Keyword(s):  
Flow Field ◽  
Steam Turbine ◽  
Numerical Study ◽  
Resonance Condition ◽  
Three Dimensional ◽  
Measurement Data ◽  
Detailed Comparison ◽  
Operating Conditions ◽  
Engineering Practice ◽  
Wide Range

An experimental and numerical study on the flow in a three stage low pressure (LP) industrial steam turbine is presented and analyzed. The investigated LP section features conical friction bolts in the last and a lacing wire in the penultimate rotor blade row. These part-span connectors (PSC) allow safe turbine operation over an extremely wide range and even in blade resonance condition. However, additional losses are generated which affect the performance of the turbine. In order to capture their impact on the flow field, extensive measurements with pneumatic multi-hole probes in an industrial steam turbine test rig have been carried out. State-of-the-art three-dimensional CFD applying a non-equilibrium steam (NES) model is used to examine the aero-thermodynamic effects of the PSC on the wet steam flow. A detailed comparison between measurement data and CFD results is performed for several operating conditions. The investigation shows that the applied CFD model is able to capture the three-dimensional flow field in LP steam turbine blading with PSC and the total pressure reduction due to the PSC with a generally good agreement to measured values and is therefore sufficient for engineering practice.

Experimental and Numerical Investigation of the Flow in a Low-Pressure Industrial Steam Turbine With Part-Span Connectors

2016 ◽  
Vol 138 (7) ◽  
Author(s):  
Markus Häfele ◽  
Christoph Traxinger ◽  
Marius Grübel ◽  
Markus Schatz ◽  
Damian M. Vogt ◽  
...  
Keyword(s):  
Flow Field ◽  
Steam Turbine ◽  
Numerical Study ◽  
Three Dimensional ◽  
Low Pressure ◽  
Operating Conditions ◽  
Engineering Practice ◽  
Cfd Model ◽  
Wide Range ◽  
The Impact

An experimental and numerical study on the flow in a three-stage low-pressure (LP) industrial steam turbine is presented and analyzed. The investigated LP section features conical friction bolts in the last and a lacing wire in the penultimate rotor blade row. These part-span connectors (PSC) allow safe turbine operation over an extremely wide range and even in blade resonance condition. However, additional losses are generated which affect the performance of the turbine. In order to capture the impact of PSCs on the flow field, extensive measurements with pneumatic multihole probes in an industrial steam turbine test rig have been carried out. State-of-the-art three-dimensional computational fluid dynamics (CFD) applying a nonequilibrium steam (NES) model is used to examine the aerothermodynamic effects of PSCs on the wet steam flow. The vortex system in coupled LP steam turbine rotor blading is discussed in this paper. In order to validate the CFD model, a detailed comparison between measurement data and steady-state CFD results is performed for several operating conditions. The investigation shows that the applied one-passage CFD model is able to capture the three-dimensional flow field in LP steam turbine blading with PSC and the total pressure reduction due to the PSC with a generally good agreement to measured values and is therefore sufficient for engineering practice.

scholarly journals Improvement of Pump Performance at Off-Design Conditions

1985 ◽  
Author(s):  
J. Paulon ◽  
C. Fradin ◽  
J. Poulain
Keyword(s):  
Experimental Study ◽  
Flow Field ◽  
Mass Flow ◽  
Flow Characteristic ◽  
Three Dimensional ◽  
Operating Conditions ◽  
Pump Performance ◽  
Wide Range ◽  
Mass Flows ◽  
Design Value

Industrial pumps are generally used in a wide range of operating conditions from almost zero mass flow to mass flows larger than the design value. It has been often noted that the head-mass flow characteristic, at constant speed, presents a negative bump as the mass flow is somewhat smaller than the design mass flows. Flow and mechanical instabilities appear, which are unsafe for the facility. An experimental study has been undertaken in order to analyze and if possible to palliate these difficulties. A detailed flow analyzis has shown strong three dimensional effects and flow separations. From this better knowledge of the flow field, a particular device was designed and a strong attenuation of the negative bump was obtained.

Numerical Investigation of the Impact of Part-Span Connectors on Aero-Thermodynamics in a Low Pressure Industrial Steam Turbine

2014 ◽  
Author(s):  
M. Häfele ◽  
J. Starzmann ◽  
M. Grübel ◽  
M. Schatz ◽  
D. M. Vogt ◽  
...  
Keyword(s):  
Steam Turbine ◽  
Numerical Study ◽  
Three Dimensional ◽  
Measurement Data ◽  
Cross Flow ◽  
Low Pressure ◽  
Wet Steam ◽  
Flow Vortex ◽  
The Impact ◽  
Non Equilibrium

A numerical study on the flow in a three stage low pressure industrial steam turbine with conical friction bolts in the last stage and lacing wires in the penultimate stage is presented and analyzed. Structured high-resolution hexahedral meshes are used for all three stages and the meshing methodology is shown for the rotor with friction bolts and blade reinforcements. Modern three-dimensional CFD with a non-equilibrium wet steam model is used to examine the aero-thermodynamic effects of the part-span connectors. A performance assessment of the coupled blades at part load, design and overload condition is presented and compared with measurement data from an industrial steam turbine test rig. Detailed flow field analyses and a comparison of blade loading between configurations with and without part-span connectors are presented in this paper. The results show significant interaction of the cross flow vortex along the part-span connector with the blade passage flow causing aerodynamic losses. This is the first time that part-span connectors are being analyzed using a non-equilibrium wet steam model. It is shown that additional wetness losses are induced by these elements.

Experimental and Numerical Assessment of the Impact of Part-Span Connectors on Turbine Efficiency and Flow Field

2019 ◽  
Author(s):  
C. Brüggemann ◽  
M. Schatz ◽  
D. M. Vogt ◽  
F. Popig
Keyword(s):  
Flow Field ◽  
Detailed Comparison ◽  
Operating Conditions ◽  
Free Standing ◽  
Aerodynamic Loss ◽  
Turbine Efficiency ◽  
Numerical Assessment ◽  
Wide Range ◽  
The Impact ◽  
Operating Points

Abstract This study presents the results of measurements in an industrial steam turbine test rig operated at the Institute of Thermal Turbomachinery and Machinery Laboratory (ITSM) in Stuttgart, Germany. In order to ensure safe operation over a wide range of operating conditions the last and penultimate rotor blade rows of this turbine feature Part-Span Connectors (PSC). The PSC provide additional coupling and mechanical damping during operation, however, they present a major obstacle to the flow, thus causing additional aerodynamic loss. The focus of the present work is on the aerodynamic impact of the PSC on the flow field of the last stage. To capture this impact, an extensive measurement campaign over a wide range of operating points was performed using two last blade row configurations that are identical with regard to the blade design, except for the fact that one features free-standing blades while the second is equipped with PSC. A performance assessment of these two configurations based on detailed probe measurements and overall turbine efficiency is presented. Additionally, a detailed comparison of 3D CFD-results employing an equilibrium steam (EQS) model and a non-equilibrium steam (NES) model for both configurations is shown with good agreement to the test data. However, comparing the two models reveals major differences whenever there is condensation occurring close to the evaluation plane, thus the advantage of applying the NES model is presented.

scholarly journals Drops bouncing off macro-textured superhydrophobic surfaces

2017 ◽  
Vol 824 ◽  
pp. 866-885 ◽  
Author(s):  
Ali Mazloomi Moqaddam ◽  
Shyam S. Chikatamarla ◽  
Iliya V. Karlin
Keyword(s):  
Contact Time ◽  
Numerical Study ◽  
Three Dimensional ◽  
Superhydrophobic Surfaces ◽  
Nonlinear Behaviour ◽  
Textured Surfaces ◽  
Texture Density ◽  
Wide Range ◽  
Quantitative Manner ◽  
The Impact

Recent experiments with droplets impacting macro-textured superhydrophobic surfaces revealed new regimes of bouncing with a remarkable reduction of the contact time. Here we present a comprehensive numerical study that reveals the physics behind these new bouncing regimes and quantifies the roles played by various external and internal forces. For the first time, accurate three-dimensional simulations involving realistic macro-textured surfaces are performed. After demonstrating that simulations reproduce experiments in a quantitative manner, the study is focused on analysing the flow situations beyond current experiments. We show that the experimentally observed reduction of contact time extends to higher Weber numbers, and analyse the role played by the texture density. Moreover, we report a nonlinear behaviour of the contact time with the increase of the Weber number for imperfectly coated textures, and study the impact on tilted surfaces in a wide range of Weber numbers. Finally, we present novel energy analysis techniques that elaborate and quantify the interplay between the kinetic and surface energy, and the role played by the dissipation for various Weber numbers.

Numerical Simulation of Gas Flow and Heat Transfer in Cross-Wavy Primary Surface Channel for Microtubine Recuperators

2005 ◽  
Author(s):  
H. X. Liang ◽  
Q. W. Wang ◽  
L. Q. Luo ◽  
Z. P. Feng
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Gas Turbine ◽  
Numerical Study ◽  
High Reliability ◽  
Three Dimensional ◽  
Operating Conditions ◽  
Flow And Heat Transfer ◽  
High Heat Transfer ◽  
The Cross

Three-dimensional numerical simulation was conducted to investigate the flow field and heat transfer performance of the Cross-Wavy Primary Surface (CWPS) recuperators for microturbines. Using high-effective compact recuperators to achieve high thermal efficiency is one of the key techniques in the development of microturbine in recent years. Recuperators need to have minimum volume and weight, high reliability and durability. Most important of all, they need to have high thermal-effectiveness and low pressure-losses so that the gas turbine system can achieve high thermal performances. These requirements have attracted some research efforts in designing and implementing low-cost and compact recuperators for gas turbine engines recently. One of the promising techniques to achieve this goal is the so-called primary surface channels with small hydraulic dimensions. In this paper, we conducted a three-dimensional numerical study of flow and heat transfer for the Cross-Wavy Primary Surface (CWPS) channels with two different geometries. In the CWPS configurations the secondary flow is created by means of curved and interrupted surfaces, which may disturb the thermal boundary layers and thus improve the thermal performances of the channels. To facilitate comparison, we chose the identical hydraulic diameters for the above four CWPS channels. Since our experiments on real recuperators showed that the Reynolds number ranges from 150 to 500 under the operating conditions, we implemented all the simulations under laminar flow situations. By analyzing the correlations of Nusselt numbers and friction factors vs. Reynolds numbers of the four CWPS channels, we found that the CWPS channels have superior and comprehensive thermal performance with high compactness, i.e., high heat transfer area to volume ratio, indicating excellent commercialized application in the compact recuperators.

Influence of a Cylindrical Exhaust Hood Installation on the Last Stage Rotor Blades of a Low Pressure Model Steam Turbine

2017 ◽  
Author(s):  
Fabian F. Müller ◽  
Markus Schatz ◽  
Damian M. Vogt ◽  
Jens Aschenbruck
Keyword(s):  
Flow Field ◽  
Steam Turbine ◽  
Operating Conditions ◽  
Rotor Blades ◽  
Pressure Measurements ◽  
Exhaust Hood ◽  
Blade Vibration ◽  
Time Resolved ◽  
Vibration Behavior ◽  
Last Stage

The influence of a cylindrical strut shortly downstream of the bladerow on the vibration behavior of the last stage rotor blades of a single stage LP model steam turbine was investigated in the present study. Steam turbine retrofits often result in an increase of turbine size, aiming for more power and higher efficiency. As the existing LP steam turbine exhaust hoods are generally not modified, the last stage rotor blades frequently move closer to installations within the exhaust hood. To capture the influence of such an installation on the flow field characteristics, extensive flow field measurements using pneumatic probes were conducted at the turbine outlet plane. In addition, time-resolved pressure measurements along the casing contour of the diffuser and on the surface of the cylinder were made, aiming for the identification of pressure fluctuations induced by the flow around the installation. Blade vibration behavior was measured at three different operating conditions by means of a tip timing system. Despite the considerable changes in the flow field and its frequency content, no significant impact on blade vibration amplitudes were observed for the investigated case and considered operating conditions. Nevertheless, time-resolved pressure measurements suggest that notable pressure oscillations induced by the vortex shedding can reach the upstream bladerow.

Detailed Numerical Study of the Main Sources of Loss and Flow Behavior in Low Pressure Steam Turbine Exhaust Hoods

2017 ◽  
Author(s):  
Dickson Munyoki ◽  
Markus Schatz ◽  
Damian M. Vogt
Keyword(s):  
Steam Turbine ◽  
Numerical Study ◽  
Flow Behavior ◽  
Low Pressure ◽  
Operating Conditions ◽  
Pressure Recovery ◽  
Exhaust Hood ◽  
Recovery Coefficient ◽  
Pressure Steam ◽  
Underlying Mechanisms

The performance of the axial-radial diffuser downstream of the last low-pressure steam turbine stages and the losses occurring subsequently within the exhaust hood directly influences the overall efficiency of a steam power plant. It is estimated that an improvement of the pressure recovery in the diffuser and exhaust hood by 10% translates into 1% of last stage efficiency [11]. While the design of axial-radial diffusers has been the object of quite many studies, the flow phenomena occurring within the exhaust hood have not received much attention in recent years. However, major losses occur due to dissipation within vortices and inability of the hood to properly diffuse the flow. Flow turning from radial to downward flow towards the condenser, especially at the upper part of the hood is essentially the main cause for this. This paper presents a detailed analysis of the losses within the exhaust hood flow for two operating conditions based on numerical results. In order to identify the underlying mechanisms and the locations where dissipation mainly occurs, an approach was followed, whereby the diffuser inflow is divided into different sectors and pressure recovery, dissipation and finally residual kinetic energy of the flow originating from these sectors is calculated at different locations within the hood. Based on this method, the flow from the topmost sectors at the diffuser inlet is found to cause the highest dissipation for both investigated cases. Upon hitting the exhaust hood walls, the flow on the upper part of the diffuser is deflected, forming complex vortices which are stretching into the condenser and interacting with flow originating from other sectors, thereby causing further swirling and generating additional losses. The detailed study of the flow behavior in the exhaust hood and the associated dissipation presents an opportunity for future investigations of efficient geometrical features to be introduced within the hood to improve the flow and hence the overall pressure recovery coefficient.

scholarly journals The circulation of the Persian Gulf: a numerical study

2005 ◽  
Vol 2 (3) ◽  
pp. 129-164 ◽  
Author(s):  
J. Kämpf ◽  
M. Sadrinasab
Keyword(s):  
United Arab Emirates ◽  
Persian Gulf ◽  
Thermal Stratification ◽  
Numerical Study ◽  
Three Dimensional ◽  
Detailed Comparison ◽  
Mass Properties ◽  
Inverse Estuary ◽  
The Persian Gulf ◽  
Autumn And Winter

Abstract. We employ a three-dimensional hydrodynamic model (COHERENS) to study the circulation and water mass properties of the Persian Gulf, which is a large inverse estuary. Our findings suggest that the Persian Gulf experiences a distinct seasonal cycle in which a Gulf-wide cyclonic overturning circulation establishes in spring and summer, but this disintegrates into mesoscale eddies in autumn and winter. Establishment of the Gulf-wide circulation coincides with establishment of thermal stratification and strengthening of the baroclinic exchange circulation through the Strait of Hormuz. The latter is associated with winter cooling of extreme saline (>45 psu) water in shallow regions along the coast of United Arab Emirates. To validate the model results, we present a detailed comparison with observational evidence.

Sign in / Sign up

Export Citation Format

Share Document