Numerical Combustion and Heat Transfer Simulations and Validation for a Hydrogen Fueled “Micromix” Test Combustor in Industrial Gas Turbine Applications

2017 ◽  
Author(s):  
C. Striegan ◽  
A. Haj Ayed ◽  
K. Kusterer ◽  
H. H.-W. Funke ◽  
S. Loechle ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Diffusion Flames ◽  
Renewable Energy Sources ◽  
Flame Structure ◽  
Industrial Applications ◽  
Nox Emissions ◽  
Numerical Work ◽  
Low Emission

Hydrogen represents a possible alternative gas turbine fuel for future low emission power generation once it can be combined with the use of renewable energy sources for its production. Due to its different physical properties compared to other fuels such as natural gas, well established gas turbine combustion systems cannot be directly applied for Dry Low NOx (DLN) Hydrogen combustion. This makes the development of new combustion technologies an essential and challenging task for the future of hydrogen fueled gas turbines. The newly developed and successfully tested “DLN Micromix” combustion technology offers great potential to burn hydrogen in gas turbines at very low NOx emissions. The mixing of hydrogen and air is based on the jet in cross-flow (JICF) principle, where the gaseous fuel is injected perpendicular into the crossing air stream. The reaction takes place in multiple miniaturized diffusion flames with an inherent safety against flashback and the potential of low NOx emissions due to a short residence time of the reactants in the flame region. Aiming to further develop an existing burner design in terms of an increased energy density, a redesign is required in order to stabilize the flames at higher mass flows while maintaining low emission levels. For this reason, a systematic numerical analysis using CFD is carried out, to identify the interactions of combustion, radiation and heat conduction in the adjacent burner wall by conjugate heat transfer (CHT) methods. Different combustion models are applied, starting from a hybrid eddy break-up model to more advanced turbulence-chemistry interaction approaches considering detailed chemical mechanisms. Those allow an improved prediction of the different NO-pathways of production and consumption. The results of the simulations are in good agreement with atmospheric test rig data of optical flame structure, measured combustor surface temperatures and NOx emissions. The numerical methods help reducing the effort of manufacturing and testing to few designs for single validation campaigns, in order to confirm the flame stability and NOx emissions in a wider operating condition field. Further on, the more detailed CFD-simulations support the understanding of decisive mechanisms to reduce the numerical work to the most important models for further industrial applications in future.

NOx Emissions Reduction in an Innovative Industrial Gas Turbine Combustor (GE10 Machine): A Numerical Study of the Benefits of a New Pilot-System on Flame Structure and Emissions

2005 ◽  
Author(s):  
Antonio Andreini ◽  
Bruno Facchini ◽  
Luca Mangani ◽  
Antonio Asti ◽  
Gianni Ceccherini ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Numerical Study ◽  
Flame Structure ◽  
Combustion Model ◽  
Emissions Reduction ◽  
Minimal Amount ◽  
Nox Emissions ◽  
Ambient Temperatures ◽  
Wide Range

One of the driving requirements in gas turbine design is emissions reduction. In the mature markets (especially the North America), permits to install new gas turbines are granted provided emissions meet more and more restrictive requirements, in a wide range of ambient temperatures and loads. To meet such requirements, design techniques have to take advantage also of the most recent CFD tools. As a successful example of this, this paper reports the results of a reactive 3D numerical study of a single-can combustor for the GE10 machine, recently updated by GE-Energy. This work aims to evaluate the benefits on the flame shape and on NOx emissions of a new pilot-system located on the upper part of the liner. The former GE10 combustor is equipped with fuel-injecting-holes realizing purely diffusive pilot-flames. To reduce NOx emissions from the current 25 ppmvd@15%O2 to less than 15 ppmvd@15%O2 (in the ambient temperature range from −28.9°C to +37.8°C and in the load range from 50% and 100%), the new version of the combustor is equipped with 4 swirler-burners realizing lean-premixed pilot flames; these flames in turn are stabilized by a minimal amount of lean-diffusive sub-pilot-fuel. The overall goal of this new configuration is the reduction of the fraction of fuel burnt in diffusive flames, lowering peak temperatures and therefore NOx emissions. To analyse the new flame structure and to check the emissions reduction, a reactive RANS study was performed using STAR-CD™ package. A user-defined combustion model was used, while to estimate NOx emissions a specific scheme was also developed. Three different ambient temperatures (ISO, −28.9°C and 37.8°C) were simulated. Results were then compared with experimental measurements (taken both from the engine and from the rig), resulting in reasonable agreement. Finally, an additional simulation with an advanced combustion model, based on the laminar flamelet approach, was performed. The model is based on the G-Equation scheme but was modified to study partially premixed flames. A geometric procedure to solve G-Equation was implemented as add-on in STAR-CD™.

Study of a Rich/Lean Staged Combustion Concept for Hydrogen at Gas Turbine Relevant Conditions

2013 ◽  
Author(s):  
Felipe Bolaños ◽  
Dieter Winkler ◽  
Felipe Piringer ◽  
Timothy Griffin ◽  
Rolf Bombach ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Carbon Capture ◽  
Flame Temperature ◽  
Nox Emissions ◽  
Hydrogen Fuel ◽  
Auto Ignition ◽  
Wide Range ◽  
The Rich

The combustion of hydrogen-rich fuels (> 80 % vol. H2), relevant for gas turbine cycles with “pre-combustion” carbon capture, creates great challenges in the application of standard lean premix combustion technology. The significant higher flame speed and drastically reduced auto-ignition delay time of hydrogen compared to those of natural gas, which is normally burned in gas turbines, increase the risk of higher NOX emissions and material damage due to flashback. Combustion concepts for gas turbines operating on hydrogen fuel need to be adapted to assure safe and low-emission combustion. A rich/lean (R/L) combustion concept with integrated heat transfer that addresses the challenges of hydrogen combustion has been investigated. A sub-scale, staged burner with full optical access has been designed and tested at gas turbine relevant conditions (flame temperature of 1750 K, preheat temperature of 400 °C and a pressure of 8 bar). Results of the burner tests have confirmed the capability of the rich/lean staged concept to reduce the NOx emissions for undiluted hydrogen fuel. The NOx emissions were reduced from 165 ppm measured without staging (fuel pre-conversion) to 23 ppm for an R/L design having a fuel-rich hydrogen pre-conversion of 50 % at a constant power of 8.7 kW. In the realized R/L concept the products of the first rich stage, which is ignited by a Pt/Pd catalyst (under a laminar flow, Re ≈ 1900) are combusted in a diffusion-flame-like lean stage (turbulent flow Re ≈ 18500) without any flashback risk. The optical accessibility of the reactor has allowed insight into the combustion processes of both stages. Applying OH-LIF and OH*-chemiluminescence optical techniques, it was shown that mainly homogeneous reactions at rich conditions take place in the first stage, questioning the importance of a catalyst in the system, and opening a wide range of optimization possibilities. The promising results obtained in this study suggest that such a rich/lean staged burner with integrated heat transfer could help to develop a new generation of gas turbine burners for safe and clean combustion of H2-rich fuels.

Experimental and Numerical Study on Optimizing the Dry Low NOx Micromix Hydrogen Combustion Principle for Industrial Gas Turbine Applications

2016 ◽  
Vol 9 (2) ◽  
Author(s):  
Harald H. W. Funke ◽  
Jan Keinz ◽  
Karsten Kusterer ◽  
Anis Haj Ayed ◽  
Masahide Kazari ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Numerical Study ◽  
Renewable Energy Sources ◽  
Thermal Power ◽  
Flame Structure ◽  
High Energy ◽  
Hydrogen Combustion ◽  
Nox Emissions ◽  
Fuel Injectors ◽  
The Impact

Combined with the use of renewable energy sources for its production, hydrogen represents a possible alternative gas turbine fuel for future low-emission power generation. Due to the difference in the physical properties of hydrogen compared to other fuels such as natural gas, well-established gas turbine combustion systems cannot be directly applied to dry low NOx (DLN) hydrogen combustion. The DLN micromix combustion of hydrogen has been under development for many years, since it has the promise to significantly reduce NOx emissions. This combustion principle for air-breathing engines is based on crossflow mixing of air and gaseous hydrogen. Air and hydrogen react in multiple miniaturized diffusion-type flames with an inherent safety against flashback and with low NOx emissions due to a very short residence time of the reactants in the flame region. The paper presents an advanced DLN micromix hydrogen application. The experimental and numerical study shows a combustor configuration with a significantly reduced number of enlarged fuel injectors with high-thermal power output at constant energy density. Larger fuel injectors reduce manufacturing costs, are more robust and less sensitive to fuel contamination and blockage in industrial environments. The experimental and numerical results confirm the successful application of high-energy injectors, while the DLN micromix characteristics of the design point, under part-load conditions, and under off-design operation are maintained. Atmospheric test rig data on NOx emissions, optical flame-structure, and combustor material temperatures are compared to numerical simulations and show good agreement. The impact of the applied scaling and design laws on the miniaturized micromix flamelets is particularly investigated numerically for the resulting flow field, the flame-structure, and NOx formation.

Fundamental Gas Turbine Heat Transfer

2013 ◽  
Vol 5 (2) ◽  
Author(s):  
Je-Chin Han
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Cooling System ◽  
Turbine Blades ◽  
Turbine Rotor ◽  
Industrial Applications ◽  
Future Research ◽  
Gas Turbine Heat Transfer ◽  
Cooling Air

Gas turbines are used for aircraft propulsion and land-based power generation or industrial applications. Thermal efficiency and power output of gas turbines increase with increasing turbine rotor inlet temperatures (RIT). Current advanced gas turbine engines operate at turbine RIT (1700 °C) far higher than the melting point of the blade material (1000 °C); therefore, turbine blades are cooled by compressor discharge air (700 °C). To design an efficient cooling system, it is a great need to increase the understanding of gas turbine heat transfer behaviors within complex 3D high-turbulence unsteady engine-flow environments. Moreover, recent research focuses on aircraft gas turbines operating at even higher RIT with limited cooling air and land-based gas turbines burn coal-gasified fuels with a higher heat load. It is important to understand and solve gas turbine heat transfer problems under new harsh working environments. The advanced cooling technology and durable thermal barrier coatings play critical roles for the development of advanced gas turbines with near zero emissions for safe and long-life operation. This paper reviews fundamental gas turbine heat transfer research topics and documents important relevant papers for future research.

Experimental and Numerical Study on Optimizing the DLN Micromix Hydrogen Combustion Principle for Industrial Gas Turbine Applications

2015 ◽  
Author(s):  
H. H.-W. Funke ◽  
J. Keinz ◽  
K. Kusterer ◽  
A. Haj Ayed ◽  
M. Kazari ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Numerical Study ◽  
Renewable Energy Sources ◽  
Thermal Power ◽  
Flame Structure ◽  
High Energy ◽  
Hydrogen Combustion ◽  
Nox Emissions ◽  
Fuel Injectors ◽  
The Impact

Combined with the use of renewable energy sources for its production, hydrogen represents a possible alternative gas turbine fuel for future low emission power generation. Due to the difference in the physical properties of hydrogen compared to other fuels such as natural gas, well-established gas turbine combustion systems cannot be directly applied to Dry Low NOx (DLN) hydrogen combustion. The DLN Micromix combustion of hydrogen has been under development for many years, since it has the promise to significantly reduce NOx emissions. This combustion principle for air-breathing engines is based on cross-flow mixing of air and gaseous hydrogen. Air and hydrogen react in multiple miniaturized diffusion-type flames with an inherent safety against flash-back and with low NOx-emissions due to a very short residence time of the reactants in the flame region. The paper presents an advanced DLN Micromix hydrogen application. The experimental and numerical study shows a combustor configuration with a significantly reduced number of enlarged fuel injectors with high thermal power output at constant energy density. Larger fuel injectors reduce manufacturing costs, are more robust and less sensitive to fuel contamination and blockage in industrial environments. The experimental and numerical results confirm the successful application of high energy injectors, while the DLN Micromix characteristics of the design point, under part load conditions and under off-design operation are maintained. Atmospheric test rig data on NOx emissions, optical flame structure and combustor material temperatures are compared to numerical simulations and show good agreement. The impact of the applied scaling and design laws on the miniaturized Micromix flamelets is particularly investigated numerically for the resulting flow field, the flame structure and NOx formation.

Numerical Study on Increased Energy Density for the DLN Micromix Hydrogen Combustion Principle

2014 ◽  
Author(s):  
A. Haj Ayed ◽  
K. Kusterer ◽  
H. H.-W. Funke ◽  
J. Keinz ◽  
M. Kazari ◽  
...  
Keyword(s):  
Energy Density ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Numerical Study ◽  
Flame Structure ◽  
Numerical Results ◽  
Hydrogen Combustion ◽  
Energy Output ◽  
Nox Emissions ◽  
Diffusion Type

Combined with the use of renewable energy sources for its production, hydrogen represents a possible alternative gas turbine fuel within future low emission power generation. Due to the large difference in the physical properties of hydrogen compared to other fuels such as natural gas, well established gas turbine combustion systems cannot be directly applied for Dry Low NOx (DLN) hydrogen combustion. Thus, the development of DLN hydrogen combustion technologies is an essential and challenging task for the future of hydrogen fuelled gas turbines. The DLN Micromix combustion principle for hydrogen fuel is being developed since years to significantly reduce NOx-emissions. This combustion principle is based on cross-flow mixing of air and gaseous hydrogen which reacts in multiple miniaturized diffusion-type flames. The major advantages of this combustion principle are the inherent safety against flashback and the low NOx-emissions due to a very short residence time of reactants in the flame region of the micro-flames. For the low NOx Micromix hydrogen application the paper presents a numerical study showing the further potential to reduce the number of hydrogen injectors by increasing the hydrogen injector diameter significantly by more than 350% resulting in an enlarged diffusion-type flame size. Experimental data is compared to numerical results for one configuration with increased hydrogen injector size and two different aerodynamic flame stabilization design laws. The applied design law for aerodynamic stabilization of the miniaturized flamelets is scaled according to the hydrogen injector size while maintaining equal thermal energy output and significantly low NOx emissions. Based on this parameter variation study the impact of different geometric parameters on flow field, flame structure and NOx formation is investigated by the numerical study. The numerical results show that the low NOx emission characteristics and the Micromix flame structure are maintained at larger hydrogen injector size and reveal even further potential for energy density increase and a reduction of combustor complexity and production costs.

Field Conversion of a Low-Firing Frame 7B Gas Turbine Power Plant to Ultra-Low Emission Combustion

2015 ◽  
Author(s):  
Nicolas Demougeot ◽  
Jeffrey A. Benoit
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Energy Demand ◽  
Water Injection ◽  
Cost Benefit ◽  
High Energy ◽  
Nox Emissions ◽  
Environmental Controls ◽  
Low Emission ◽  
Technical Discussion

The search for power plant sustainability options continues as regulating agencies exert more stringent industrial gas turbine emission requirements on operators. Purchasing power for resale, de-commissioning current capabilities altogether and repowering by replacing or converting existing equipment to comply with emissions standards are economic-driven options contemplated by many mature gas turbine operators. NRG’s Gilbert power plant based in Milford, NJ began commercial operation in 1974 and is fitted with four (4) natural gas fired GE’s 7B gas turbine generators with two each exhausting to HRSG’s feeding one (1) steam turbine generator. The gas turbine units, originally configured with diffusion flame combustion systems with water injection, were each emitting 35 ppm NOx with the New Jersey High Energy Demand Day (HEED) regulatory mandate to reduce NOx emissions to sub 10 ppm by May 1st, 2015. Studies were conducted by the operator to evaluate the economic viability & installation of environmental controls to reduce NOx emissions. It was determined that installation of post-combustion environmental controls at the facility was both cost prohibitive and technically challenging, and would require a fundamental reconfiguration of the facility. Based on this economic analysis, the ultra-low emission combustion system conversion package was selected as the best cost-benefit solution. This technical paper will focus on the ultra low emissions technology and key features employed to achieve these low emissions, a description of the design challenges and solution to those, a summary of the customer considerations in down selecting options and an overview of the conversion scope. Finally, a technical discussion of the low emissions operational flexibility will be provided including performance results of the converted units.

Expectations and Recent Experience for Gas Turbine Reliability, Availability, and Maintainability (RAM)

2007 ◽  
Author(s):  
Robert F. Steele ◽  
Dale C. Paul ◽  
Torgeir Rui
Keyword(s):  
Power Systems ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Advanced Technology ◽  
Recent Experience ◽  
Reliability Growth ◽  
Market Place ◽  
New Product Introductions ◽  
Low Emission ◽  
The Cost

Since the early 1990’s there have been significant changes in the gas turbine, and power generation market place. The ‘F-Class’ Gas Turbines, with higher firing temperatures, single crystal materials, increased compressor pressure ratios and low emission combustion systems that were introduced in the early 1990’s have gained significant field experience. Many of the issues experienced by these new product introductions have been addressed. The actual reliability growth and current performance of these advanced technology machines will be examined. Additionally, the operating profiles anticipated for many of the units installed during this period has been impacted by both changes in the anticipated demand and increases in fuel costs, especially the cost of natural gas. This paper will review how these changes have impacted the Reliability, Availability, and Maintainability performance of gas turbines. Data from the ORAP® System, maintained by Strategic Power Systems, Inc, will be utilized to examine the actual RAM performance over the past 10 to 15 years in relation to goals and expectations. Specifically, this paper will examine the reliability growth of the F-Class turbines since the 1990’s and examine the reliability impact of duty cycle on RAM performance.

scholarly journals The Effect of Discrete Pilot Hydrogen Dopant Injection on the Lean Blowout Performance of a Model Gas Turbine Combustor

1999 ◽  
Author(s):  
Oanh Nguyen ◽  
Scott Samuelsen
Keyword(s):  
Gas Turbine ◽  
Atmospheric Pressure ◽  
Gas Turbines ◽  
Nox Emissions ◽  
Gas Turbine Combustor ◽  
Lean Blowout ◽  
Lean Combustion ◽  
Attractive Option ◽  
Overall Performance ◽  
Model Gas Turbine Combustor

In view of increasingly stringent NOx emissions regulations on stationary gas turbines, lean combustion offers an attractive option to reduce reaction temperatures and thereby decrease NOx production. Under lean operation, however, the reaction is vulnerable to blowout. It is herein postulated that pilot hydrogen dopant injection, discretely located, can enhance the lean blowout performance without sacrificing overall performance. The present study addresses this hypothesis in a research combustor assembly, operated at atmospheric pressure, and fired on natural gas using rapid mixing injection, typical of commercial units. Five hydrogen injector scenarios are investigated. The results show that (1) pilot hydrogen dopant injection, discretely located, leads to improved lean blowout performance and (2) the location of discrete injection has a significant impact on the effectiveness of the doping strategy.

The United States Navy “Standard Day” for Marine Gas Turbines

2017 ◽  
Author(s):  
John Hartranft ◽  
Bruce Thompson ◽  
Dan Groghan
Keyword(s):  
United States ◽  
Gas Turbine ◽  
United States Navy ◽  
Gas Turbines ◽  
The United States ◽  
Industrial Applications ◽  
Jet Engines ◽  
Jet Engine ◽  
Advantages And Disadvantages ◽  
Power Capability

Following the successful development of aircraft jet engines during World War II (WWII), the United States Navy began exploring the advantages of gas turbine engines for ship and boat propulsion. Early development soon focused on aircraft derivative (aero derivative) gas turbines for use in the United States Navy (USN) Fleet rather than engines developed specifically for marine and industrial applications due to poor results from a few of the early marine and industrial developments. Some of the new commercial jet engine powered aircraft that had emerged at the time were the Boeing 707 and the Douglas DC-8. It was from these early aircraft engine successes (both commercial and military) that engine cores such as the JT4-FT4 and others became available for USN ship and boat programs. The task of adapting the jet engine to the marine environment turned out to be a substantial task because USN ships were operated in a completely different environment than that of aircraft which caused different forms of turbine corrosion than that seen in aircraft jet engines. Furthermore, shipboard engines were expected to perform tens of thousands of hours before overhaul compared with a few thousand hours mean time between overhaul usually experienced in aircraft applications. To address the concerns of shipboard applications, standards were created for marine gas turbine shipboard qualification and installation. One of those standards was the development of a USN Standard Day for gas turbines. This paper addresses the topic of a Navy Standard Day as it relates to the introduction of marine gas turbines into the United States Navy Fleet and why it differs from other rating approaches. Lastly, this paper will address examples of issues encountered with early requirements and whether current requirements for the Navy Standard Day should be changed. Concerning other rating approaches, the paper will also address the issue of using an International Organization for Standardization, that is, an International Standard Day. It is important to address an ISO STD DAY because many original equipment manufacturers and commercial operators prefer to rate their aero derivative gas turbines based on an ISO STD DAY with no losses. The argument is that the ISO approach fully utilizes the power capability of the engine. This paper will discuss the advantages and disadvantages of the ISO STD DAY approach and how the USN STD DAY approach has benefitted the USN. For the future, with the advance of engine controllers and electronics, utilizing some of the features of an ISO STD DAY approach may be possible while maintaining the advantages of the USN STD DAY.

Sign in / Sign up

Export Citation Format

Share Document