Thermal Conductivity of Core-Shell Nanostructures: From Nanowires to Nanocomposites

2005 ◽  
Author(s):  
Ronggui Yang ◽  
Gang Chen ◽  
Mildred S. Dresselhaus
Keyword(s):  
Thermal Conductivity ◽  
Silicon Nanowires ◽  
High Efficiency ◽  
Longitudinal Direction ◽  
Building Blocks ◽  
Phonon Transport ◽  
Generic Model ◽  
Core Shell ◽  
The Core ◽  
Shell Nanostructures

Core-shell heterostructures could potentially become the building blocks of nanotechnology for electronic and optoelectronic applications. The increased surface or interface area will decrease the thermal conductivity of such nanostructures and impose challenges for the thermal management such devices. In the mean time, the decreased thermal conductivity might benefit the thermoelectric conversion efficiency. In this paper, a generic model is established to study phonon transport in core-shell nanowire structures in the longitudinal direction using the phonon Boltzmann equation. The model can be used to simulate a variety of nanostructures, including nanowires and nanocomposites by changing some of the input parameters. We first report the dependence of the thermal conductivity on the surface conditions and the core-shell geometry for silicon core - germanium shell and tubular silicon nanowires. When the scattering at the outer shell surface in the generic model is assumed to be totally specular, the core-shell nanostructure resembles a simulation unit cell of periodic two-dimensional (2-D) nanocomposites. Thermal conductivity of nanowire composites and cylindrical nanoporous material in longitudinal direction is thus predicted as a function of the size of the nanowires and nanopores, and the volumetric fraction of the constituent materials. Results of this study can be used to direct the development of high efficiency thermoelectric materials.

scholarly journals Iron Based Core-Shell Structures as Versatile Materials: Magnetic Support and Solid Catalyst

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 72
Author(s):  
Christian Zambrzycki ◽  
Runbang Shao ◽  
Archismita Misra ◽  
Carsten Streb ◽  
Ulrich Herr ◽  
...  
Keyword(s):  
Water Purification ◽  
Functional Materials ◽  
Core Material ◽  
Solid Catalyst ◽  
Core Shell ◽  
Shell Nanoparticles ◽  
The Core ◽  
Shell Nanostructures ◽  
Sio2 Shell ◽  
Iron Based

Core-shell materials are promising functional materials for fundamental research and industrial application, as their properties can be adapted for specific applications. In particular, particles featuring iron or iron oxide as core material are relevant since they combine magnetic and catalytic properties. The addition of an SiO2 shell around the core particles introduces additional design aspects, such as a pore structure and surface functionalization. Herein, we describe the synthesis and application of iron-based core-shell nanoparticles for two different fields of research that is heterogeneous catalysis and water purification. The iron-based core shell materials were characterized by transmission electron microscopy, as well as N2-physisorption, X-ray diffraction, and vibrating-sample magnetometer measurements in order to correlate their properties with the performance in the target applications. Investigations of these materials in CO2 hydrogenation and water purification show their versatility and applicability in different fields of research and application, after suitable individual functionalization of the core-shell precursor. For design and application of magnetically separable particles, the SiO2 shell is surface-functionalized with an ionic liquid in order to bind water pollutants selectively. The core requires no functionalization, as it provides suitable magnetic properties in the as-made state. For catalytic application in synthesis gas reactions, the SiO2-stabilized core nanoparticles are reductively functionalized to provide the catalytically active metallic iron sites. Therefore, Fe@SiO2 core-shell nanostructures are shown to provide platform materials for various fields of application, after a specific functionalization.

scholarly journals Decoupling electron and phonon transport in single-nanowire hybrid materials for high-performance thermoelectrics

2021 ◽  
Vol 7 (20) ◽  
pp. eabe6000
Author(s):  
Lin Yang ◽  
Madeleine P. Gordon ◽  
Akanksha K. Menon ◽  
Alexandra Bruefach ◽  
Kyle Haas ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Thermal Transport ◽  
Electrical Transport ◽  
High Performance ◽  
Figure Of Merit ◽  
Phonon Transport ◽  
Core Shell ◽  
Nanowire Diameter ◽  
High Performing ◽  
Polycrystalline Thin Films

Organic-inorganic hybrids have recently emerged as a class of high-performing thermoelectric materials that are lightweight and mechanically flexible. However, the fundamental electrical and thermal transport in these materials has remained elusive due to the heterogeneity of bulk, polycrystalline, thin films reported thus far. Here, we systematically investigate a model hybrid comprising a single core/shell nanowire of Te-PEDOT:PSS. We show that as the nanowire diameter is reduced, the electrical conductivity increases and the thermal conductivity decreases, while the Seebeck coefficient remains nearly constant—this collectively results in a figure of merit, ZT, of 0.54 at 400 K. The origin of the decoupling of charge and heat transport lies in the fact that electrical transport occurs through the organic shell, while thermal transport is driven by the inorganic core. This study establishes design principles for high-performing thermoelectrics that leverage the unique interactions occurring at the interfaces of hybrid nanowires.

MnO2-Coated Porous Pt@CeO2 Core-Shell Nanostructures for Photoacoustic Imaging-Guided Tri-modal Cancer Therapy

Nanoscale ◽  
2021 ◽  
Author(s):  
Qing Xu ◽  
Danyang Li ◽  
Haijun Zhou ◽  
Biaoqi Chen ◽  
Junlei Wang ◽  
...  
Keyword(s):  
Cancer Therapy ◽  
Conversion Efficiency ◽  
Photoacoustic Imaging ◽  
Core Shell ◽  
Photothermal Conversion ◽  
The Core ◽  
Shell Nanostructures

We describe the synthesis of MnO2-coated porous Pt@CeO2 core–shell nanostructures (Pt@CeO2@MnO2) as a new theranostic nano-platform. The porous Pt cores endow the core–shell nanostructures with high photothermal conversion efficiency (80%)...

Formation of bismuth iron oxide based core–shell structures and their dielectric, ferroelectric and magnetic properties

2019 ◽  
Vol 7 (5) ◽  
pp. 1280-1291 ◽  
Author(s):  
Alaka Panda ◽  
R. Govindaraj ◽  
R. Mythili ◽  
G. Amarendra
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Magnetic Properties ◽  
Iron Oxide ◽  
Shell Structures ◽  
Core Shell ◽  
Bismuth Iron Oxide ◽  
The Core ◽  
Shell Nanostructures ◽  
Transmission Electron

Bismuth and iron oxides subjected to ball milling followed by controlled annealing treatments showed the formation of core–shell nanostructures with Bi2Fe4O9 as the core and a shell of BiFeO3 and Bi25FeO40 phases as deduced based on the analysis of transmission electron microscopy results.

scholarly journals Corroboration and efficacy of Magneto-Fluorescent (NiZnFe/CdS) Nanostructures Prepared using Differently Processed Core

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Dipti Rawat ◽  
P. B. Barman ◽  
Ragini Raj Singh
Keyword(s):  
Exchange Bias ◽  
Core Shell ◽  
Ferrite Core ◽  
The Core ◽  
Shell Nanostructures ◽  
Zn Ferrite ◽  
Different Temperatures ◽  
Cds Nanostructures ◽  
Multifunctional Nanostructures ◽  
The Comparative Study

Abstract The selected and controlled preparation of core@shell nanostructures, which unite the multiple functions of ferromagnetic Ni-Zn ferrite core and CdS shell in a single material with tuneable fluorescence and magnetic properties, have been proposed by the seed mediated aqueous growth process. The shell particle thickness and core of nanostructures were precisely tuned. Current work exhibits the comparative study of core@shell multifunctional nanostructures where core being annealed at two different temperatures. The core@shell nanostructure formation was confirmed by complementary structural, elemental, optical, magnetic and IR measurements. Optical and magnetic characterizations were performed to study elaborative effects of different structural combinations of core@shell nanostructures to achieve best configuration with high-luminescence and magnetic outcomes. The interface of magnetic/nonmagnetic NiZnFe2O4/CdS nanostructures was inspected. Unexpectedly, in some of the core@shell nanostructures presence of substantial exchange-bias was observed in spite of the non-magnetic nature of CdS QDs which is clearly an “optically-active” and “magnetically-inactive” material. Presence of “exchange-bias” was confirmed by the change in “magnetic-anisotropy” as well as shift in susceptibility derivative. Finally, successful formulation of stable and efficient core@shell nanostructures achieved, which shows no exchange-bias and shift. Current findings suggest that these magneto-fluorescent nanostructures can be used in spintronics; and drug delivery-diagnosis-imaging applications in nanomedicine field.

Ferromagnetic ZnO-TiO2 Core-Shell Nanowire PhotoCatalyst with High Efficiency and Recyclability

2011 ◽  
Vol 90-93 ◽  
pp. 1702-1705
Author(s):  
Xi Zhang ◽  
Gang Xiang
Keyword(s):  
High Efficiency ◽  
Hole Concentration ◽  
Band Gaps ◽  
The Other ◽  
Band Edge ◽  
Core Shell ◽  
Hole Density ◽  
The Core ◽  
Recyclable Photocatalyst ◽  
Shell Nanowires

We demonstrate the design of the recyclable photocatalyst based on ferromagnetic (FM) ZnO- TiO2 core-shell nanowires (NWs). Since the band gaps and band edge energies of bulk ZnO and anatase TiO2 are equal to each other within about 45mV, TiO2 and ZnO can form an p-p+ heterojunction free of band discontinuities and with a built-in potential. The resulting radial field will increase hole density in the TiO2 layer while reduce hole concentration at the interface between the core and the shell, which in turn will decrease the rate of recombination in the photocatalytic TiO2, and hence increase the efficiency of photocatalyst. On the other hand, the NWs with FM cores can be easily collected and refreshed using solenoid and suitable for the recyclable usage of the NW catalyst

The ultimate step towards a tailored engineering of core@shell and core@shell@shell nanoparticles

Nanoscale ◽  
2014 ◽  
Vol 6 (22) ◽  
pp. 13483-13486 ◽  
Author(s):  
D. Llamosa ◽  
M. Ruano ◽  
L. Martínez ◽  
A. Mayoral ◽  
E. Roman ◽  
...  
Keyword(s):  
Building Blocks ◽  
Core Shell ◽  
Chemical Methods ◽  
Shell Nanoparticles ◽  
The Core ◽  
One Step ◽  
Step Generation ◽  
The One

Core@shell and core@shell@shell nanoparticles are building blocks for more sophisticated systems and a plethora of applications. The one-step generation of such complex nanoparticles is reported where the atoms of the core and shell can be easily inverted, avoiding intrinsic constraints of chemical methods.

scholarly journals Novel Core-Shell Non-Sintered Lightweight Aggregate Concrete for Better Properties in Wallboard

2021 ◽  
Author(s):  
Chaoming PANG ◽  
Xinxin MENG ◽  
Chunpeng ZHANG ◽  
Jinlong PAN
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Insulation ◽  
Lightweight Concrete ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Dry Density ◽  
Core Shell ◽  
Aggregate Concrete ◽  
The Core

Abstract Shrinkage of foam concrete can easily cause cracking and thus makes it difficult for a manufacturer to maintain quality. The density of lightweight aggregate concrete is too high to meet specifications for lightweight and thermal insulation for wallboard. Two types of concrete with dry density in the range 1000–1200 kg/m3 for use in wallboard were designed and prepared using foam and lightweight aggregate. The properties of porous lightweight aggregate concrete with core-shell non-sintered lightweight aggregate were compared with sintered lightweight aggregate concrete along with several dimensions. The two aggregates were similar in particle size, density, and strength. The effects of each aggregate on the workability, compressive strength, dry shrinkage, and thermal conductivity of the lightweight concrete were analyzed and compared. Pore structures were determined by mercury intrusion porosimetry and X-ray computed tomography. Compressive strength ranged from 7.8 to 11.8 MPa, and thermal conductivity coefficients ranged from 0.193 to 0.219 W/m/K for both types of concrete. The results showed that the core-shell non-sintered lightweight aggregate bonded better with the paste matrix at the interface transition zone and had a better pore structure than the sintered lightweight aggregate concrete. Slump flow of the core-shell non-sintered lightweight aggregate concrete was about 20% greater than that of the sintered lightweight aggregate concrete, 28d compressive strength was about 10% greater, drying shrinkage was about 10% less, and thermal conductivity was less. Porous lightweight aggregate concrete using core-shell non-sintered lightweight aggregate performs well when used in wallboard because of its low density, high thermal insulation, and improved strength.

Micro- and Nanoscale Phonon Heat Transport in Silicon

Volume 4 ◽  
2004 ◽  
Author(s):  
Y. Ju
Keyword(s):  
Thermal Conductivity ◽  
Silicon Nanowires ◽  
Phonon Dispersion ◽  
Transport Model ◽  
Phonon Transport ◽  
Conductivity Data ◽  
Phonon Modes ◽  
Conductivity Model ◽  
Thermal Conductivity Data ◽  
Thermal Conductivity Model

Micro- and nanoscale energy transport in semiconductors is one of the critical research areas for emerging nano-electronics. Key features of phonon dispersion curves are re-examined, which motivates the use of phonon density of states obtained from ab initio calculations as a basis for constructing a semi-phenomenological thermal conductivity model. Thermal conductivity data on silicon nanowires are analyzed to identify dominant phonon modes. The consistency of the present thermal conductivity model is examined by comparing its prediction with the thermal conductivity data from bulk germanium samples with controlled amount of point defects. The thermal conductivity modeling study provides input parameters for a two-fluid phonon transport model for silicon and related semiconductors, which can play an important role in computer aided design of nanoelectronic devices and simulation of ultra-fast phenomena.

scholarly journals Unravelling the interfacial interaction in mesoporous SiO2@nickel phyllosilicate/TiO2 core–shell nanostructures for photocatalytic activity

2020 ◽  
Vol 11 ◽  
pp. 1834-1846
Author(s):  
Bridget K Mutuma ◽  
Xiluva Mathebula ◽  
Isaac Nongwe ◽  
Bonakele P Mtolo ◽  
Boitumelo J Matsoso ◽  
...  
Keyword(s):  
Methyl Violet ◽  
Optoelectronic Properties ◽  
Shell Morphology ◽  
Bandgap Energy ◽  
Core Shell ◽  
The Core ◽  
Shell Nanostructures ◽  
Carrier Separation ◽  
First Time

Core–shell based nanostructures are attractive candidates for photocatalysis owing to their tunable physicochemical properties, their interfacial contact effects, and their efficacy in charge-carrier separation. This study reports, for the first time, on the synthesis of mesoporous silica@nickel phyllosilicate/titania (mSiO2@NiPS/TiO2) core–shell nanostructures. The TEM results showed that the mSiO2@NiPS composite has a core–shell nanostructure with a unique flake-like shell morphology. XPS analysis revealed the successful formation of 1:1 nickel phyllosilicate on the SiO2 surface. The addition of TiO2 to the mSiO2@NiPS yielded the mSiO2@NiPS/TiO2 composite. The bandgap energy of mSiO2@NiPS and of mSiO2@NiPS/TiO2 were estimated to be 2.05 and 2.68 eV, respectively, indicating the role of titania in tuning the optoelectronic properties of the SiO2@nickel phyllosilicate. As a proof of concept, the core–shell nanostructures were used as photocatalysts for the degradation of methyl violet dye and the degradation efficiencies were found to be 72% and 99% for the mSiO2@NiPS and the mSiO2@NiPS/TiO2 nanostructures, respectively. Furthermore, a recyclability test revealed good stability and recyclability of the mSiO2@NiPS/TiO2 photocatalyst with a degradation efficacy of 93% after three cycles. The porous flake-like morphology of the nickel phyllosilicate acted as a suitable support for the TiO2 nanoparticles. Further, a coating of TiO2 on the mSiO2@NiPS surface greatly affected the surface features and optoelectronic properties of the core–shell nanostructure and yielded superior photocatalytic properties.

Sign in / Sign up

Export Citation Format

Share Document