High Efficiency Energy Conversion System Based on Modified Brayton Cycle

2005 ◽  
Author(s):  
Anatoli A. Borissov ◽  
Alexander A. Borissov ◽  
Kenneth K. Kramer
Keyword(s):  
High Efficiency ◽  
Fuel Efficiency ◽  
Brayton Cycle ◽  
Positive Displacement ◽  
Heat Engines ◽  
Current State ◽  
Technological Advances ◽  
First Results ◽  
Power Generation Systems ◽  
Vortex Combustion

Each year, the users in the U.S. alone spend over $100 billion on various type of engines to produce power — electrical, mechanical, and thermal. Despite technological advances, most all of these power generation systems have only been fine tuned: the engine efficiencies may have been improved slightly, but the underlying thermodynamic principles have not been modified to effect a drastic improvement. The result is that most engines in service today suffer from two major problems: low fuel efficiency and emission of high levels of polluting gases in the exhaust gases. The current state of propulsion engines or distributed generation technologies using heat engines shows an average efficiency of between 20% and 40%. These low efficiencies in a high–cost energy market indicate a great need for more efficient technologies. This paper describes a new method of achieving a very high efficiency, namely optimizing every stage of the thermodynamic process-Brayton cycle. Two modified processes, such as isothermal compression and recuperation, add about 35% efficiency to the conventional Brayton cycle, making 60% efficiency for modified Brayton cycle. By utilizing a positive displacement compressor and expander with a novel vortex combustion chamber and a vortex recuperator, high levels of efficiency with low emissions and noise are possible. The prototype engine with low RPM and high torque has been built which use continuous combustion of different fuels under a constant pressure. First results of the engine’s components testing are presented.

Endovascular management of ruptured abdominal aortic aneurysms and acute aortic dissections

VASA ◽  
2019 ◽  
Vol 48 (1) ◽  
pp. 35-46
Author(s):  
Stephen Hofmeister ◽  
Matthew B. Thomas ◽  
Joseph Paulisin ◽  
Nicolas J. Mouawad
Keyword(s):  
Abdominal Aortic Aneurysms ◽  
Rapid Identification ◽  
Aortic Aneurysms ◽  
Endovascular Interventions ◽  
Current State ◽  
Technological Advances ◽  
Abdominal Aortic ◽  
Ruptured Abdominal Aortic Aneurysms ◽  
Vascular Emergencies ◽  
Aortic Dissections

Abstract. The management of vascular emergencies is dependent on rapid identification and confirmation of the diagnosis with concurrent patient stabilization prior to immediate transfer to the operating suite. A variety of technological advances in diagnostic imaging as well as the advent of minimally invasive endovascular interventions have shifted the contemporary treatment algorithms of such pathologies. This review provides a comprehensive discussion on the current state and future trends in the management of ruptured abdominal aortic aneurysms as well as acute aortic dissections.

scholarly journals Analysis of Educational Data in the Current State of University Learning for the Transition to a Hybrid Education Model

2021 ◽  
Vol 11 (5) ◽  
pp. 2068
Author(s):  
William Villegas-Ch. ◽  
Xavier Palacios-Pacheco ◽  
Milton Roman-Cañizares ◽  
Sergio Luján-Mora
Keyword(s):  
Online Education ◽  
Educational Model ◽  
Hybrid Education ◽  
Face To Face ◽  
Current State ◽  
Use Of Technology ◽  
Technological Advances ◽  
The World ◽  
The Face ◽  
Education Model

Currently, the 2019 Coronavirus Disease pandemic has caused serious damage to health throughout the world. Its contagious capacity has forced the governments of the world to decree isolation and quarantine to try to control the pandemic. The consequences that it leaves in all sectors of society have been disastrous. However, technological advances have allowed people to continue their different activities to some extent while maintaining isolation. Universities have great penetration in the use of technology, but they have also been severely affected. To give continuity to education, universities have been forced to move to an educational model based on synchronous encounters, but they have maintained the methodology of a face-to-face educational model, what has caused several problems in the learning of students. This work proposes the transition to a hybrid educational model, provided that this transition is supported by data analysis to identify the new needs of students. The knowledge obtained is contrasted with the performance presented by the students in the face-to-face modality and the necessary parameters for the transition to this modality are clearly established. In addition, the guidelines and methodology of online education are considered in order to take advantage of the best of both modalities and guarantee learning.

Stirling Engine Technology for Parabolic Dish-Stirling System Based on Concentrating Solar Power (CSP)

2015 ◽  
Vol 785 ◽  
pp. 576-580 ◽  
Author(s):  
Liaw Geok Pheng ◽  
Rosnani Affandi ◽  
Mohd Ruddin Ab Ghani ◽  
Chin Kim Gan ◽  
Jano Zanariah
Keyword(s):  
High Efficiency ◽  
Combustion Engine ◽  
Renewable Energy Sources ◽  
Stirling Engine ◽  
Energy Sources ◽  
Heat Engines ◽  
Stirling Engines ◽  
Parabolic Dish ◽  
Mechanical Devices ◽  
And Control

Solar energy is one of the more attractive renewable energy sources that can be used as an input energy source for heat engines. In fact, any heat energy sources can be used with the Stirling engine. Stirling engines are mechanical devices working theoretically on the Stirling cycle, or its modifications, in which compressible fluids, such as air, hydrogen, helium, nitrogen or even vapors, are used as working fluids. When comparing with the internal combustion engine, the Stirling engine offers possibility for having high efficiency engine with less exhaust emissions. However, this paper analyzes the basic background of Stirling engine and reviews its existing literature pertaining to dynamic model and control system for parabolic dish-stirling (PD) system.

THE SURGICAL MANAGEMENT OF PEDIATRIC HYDROCEPHALUS

Neurosurgery ◽  
2008 ◽  
Vol 62 (suppl_2) ◽  
pp. SHC633-SHC642 ◽  
Author(s):  
James M. Drake
Keyword(s):  
Surgical Management ◽  
Computer Models ◽  
Future Directions ◽  
Complex Disorders ◽  
Computed Tomographic ◽  
Pediatric Hydrocephalus ◽  
Past Generation ◽  
Current State ◽  
Technological Advances ◽  
Hydrocephalus Treatment

Abstract THE SURGICAL MANAGEMENT of hydrocephalus has undergone incredible changes over the past generation of neurosurgeons, including dramatic improvements in imaging, especially computed tomographic scanning and magnetic resonance imaging, and remarkably innovative advances in cerebrospinal fluid valve technology, complex computer models, and endoscopic equipment and techniques. In terms of overall patient outcomes, however, one could conclude that things are a little better, but “not much.” This frustrating yet fascinating dichotomy between technological advancements and clinical outcomes makes hydrocephalus, first described by the ancients, as one of the most understated and complex disorders that neurosurgeons treat. The challenge to the next generation of neurosurgeons is to solve this vexing problem through better understanding of the basic science, improved computer models, additional technological advances, and, most importantly, a broad-based, concerted multidisciplinary attack on this disorder. This review focuses on the evolution of surgery for hydrocephalus over the last 30 years, the current state of the art of hydrocephalus treatment, and what appear to be the most promising future directions.

scholarly journals Biomass Gasification for Gas Turbine Based Power Generation

1997 ◽  
Author(s):  
Mark A. Paisley ◽  
Donald Anson
Keyword(s):  
Power Generation ◽  
Gas Turbine ◽  
Gas Turbines ◽  
High Efficiency ◽  
Department Of Energy ◽  
Renewable Biomass ◽  
Process Economics ◽  
Gasification Process ◽  
The Us ◽  
Power Generation Systems

The Biomass Power Program of the US Department of Energy (DOE) has as a major goal the development of cost-competitive technologies for the production of power from renewable biomass crops. The gasification of biomass provides the potential to meet his goal by efficiently and economically producing a renewable source of a clean gaseous fuel suitable for use in high efficiency gas turbines. This paper discusses the development and first commercial demonstration of the Battelle high-throughput gasification process for power generation systems. Projected process economics are presented along with a description of current experimental operations coupling a gas turbine power generation system to the research scale gasifier and the process scaleup activities in Burlington, Vermont.

Technological advances in high-efficiency particulate collection

1997 ◽  
Vol 211 (1) ◽  
pp. 53-65 ◽  
Author(s):  
K R Parker
Keyword(s):  
High Efficiency ◽  
Electrostatic Precipitator ◽  
Cost Effective ◽  
Vapour Phase ◽  
Air Toxics ◽  
Bag Filter ◽  
Element Analysis ◽  
Ongoing Research ◽  
Technological Advances ◽  
Improved Performance

Particulate control equipment for the larger industrial processes, which can effectively collect particles in the submicrometre range, is limited to the electrostatic precipitator and bag filter as cost effective methods. To meet ever decreasing emission levels, demanded by the Regulatory Agencies, the equipment suppliers and academics are involved in ongoing research and development activities in order to obtain a better understanding of the collection process itself, such as to achieve improved performance and, equally importantly, plant reliability and availability. This paper reviews some of the activities in the electrical, microelectronics, material sciences, fluid flow and finite element analysis fields and indicates how the findings are leading to new designs that are more reliable and also how the improvements are making the equipment more cost effective while operating at a higher performance level. Finally, with the concern over the emission of ‘air toxics’, while both the electrostatic precipitator and bag filter are established technology for effectively removing solid and liquid particulates with sizings well below 1 micrometre there is now an additional requirement for collecting vapour phase materials to meet the latest regulatory emission levels. Some ideas and approaches are examined which can prove effective in collecting the majority of materials classified as ‘air toxics’, such that the equipment will meet the existing and possible future emission standards.

Hysteroscopy

2020 ◽  
pp. 597-606
Author(s):  
O. A. O’Donovan ◽  
Peter J. O’Donovan
Keyword(s):  
Gold Standard ◽  
Uterine Cavity ◽  
Direct Visualization ◽  
Postmenopausal Bleeding ◽  
Endometrial Polyps ◽  
Current State ◽  
Technological Advances ◽  
Wide Range ◽  
Proper Training ◽  
Low Incidence

Hysteroscopy (direct endoscopic visualization) of the endometrial cavity is an exciting and rapidly developing field of gynaecological practice. The most dramatic advances have occurred during the last 20 years due to technological advances including miniaturization of equipment and improved optics. Hysteroscopy is used both diagnostically and therapeutically to treat a wide range of gynaecological problems (heavy menstrual bleeding, infertility, and postmenopausal bleeding). The most recent advances allow accurate direct visualization of the uterine cavity which provides a platform for targeted biopsies, safe removal of endometrial polyps, and treatment of fibroids, septa, and adhesions. Proper training has resulted in a low incidence of serious complications. The current consensus is that hysteroscopy provides a gold standard not only for evaluating and treating intrauterine pathology but also for allowing a minimalist approach which has resulted in improved patient outcomes. This chapter provides an overview of the current state of this exciting and evolving field.

scholarly journals Rotating Gliding Arc: Innovative Source for VOC Remediation

2019 ◽  
Vol 6 (2) ◽  
pp. 156-160
Author(s):  
J. Čech ◽  
L. Prokeš ◽  
M. Zemánek ◽  
L. Dostál ◽  
D. Šimek ◽  
...  
Keyword(s):  
Pressure Drop ◽  
Large Scale ◽  
High Efficiency ◽  
Gliding Arc ◽  
Pipe System ◽  
Waste Gas ◽  
Processing Step ◽  
Waste Air ◽  
First Results ◽  
Plasma Unit

The large-scale plasma treatment of waste gas in industrial or municipal conditions requires high efficiency of plasma conversion process at high processing speed, i.e., large volumetric flow. The integration of the plasma unit into existing systems puts demands on the pipe-system compatibility and minimal pressure drop due to adoption of plasma processing step. These conditions are met at the innovative rotating electrode gliding arc plasma unit described in this article. The system consists of propeller-shaped high voltage electrode inside grounded metallic tube. The design of HV electrode eliminates the pressure drop inside the air system, contrary the plasma unit itself is capable of driving the waste gas at volumetric flow up to 300 m<sup>3</sup>/hr for 20 cm pipe diameter. In the article the first results on pilot study of waste air treatment will be given for selected volatile organic compounds together with basic characteristic of the plasma unit used.

Sign in / Sign up

Export Citation Format

Share Document