Analytical and Experimental Investigation of Medium-Speed Diesel Engine Using a Kerosene Fuel

2006 ◽  
Author(s):  
Gong Chen ◽  
James N. Gamble ◽  
Dennis W. McAndrew ◽  
John McGowan ◽  
John R. Lynch
Keyword(s):  
Experimental Investigation ◽  
Diesel Engine ◽  
Diesel Engines ◽  
Fuel Injection ◽  
Exhaust Emissions ◽  
Engine Fuel ◽  
Medium Speed ◽  
Engine Testing

This paper summarizes the analytical and experimental investigation of fuel-injection-controllable medium speed diesel engines using kerosene fuels. The investigation focuses on analyzing and testing the effects of using JP-8 kerosene fuel for an engine of this type, on engine fuel injection, in-cylinder combustion, and output performances and exhaust emissions. Main properties of JP-8 fuel compared to those of conventional 2-D diesel in affecting the engine processes are identified and analyzed in connection with the engine processes. The consequent effects are analytically predicted prior to actual engine testing. Results from testing a medium-speed diesel engine using 2-D diesel and JP-8 fuel separately are presented and agree closely in the trends of variation with the analysis and prediction.

A Survey of Analysis, Modeling, and Diagnostics of Diesel Fuel Injection Systems

2016 ◽  
Vol 138 (8) ◽  
Author(s):  
Tomi R. Krogerus ◽  
Mika P. Hyvönen ◽  
Kalevi J. Huhtala
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Power Plants ◽  
Fuel Injection ◽  
High Reliability ◽  
Injection System ◽  
Engine Fuel ◽  
Injection Equipment ◽  
Diesel Fuel Injection

Diesel engines are widely used due to their high reliability, high thermal efficiency, fuel availability, and low consumption. They are used to generate power, e.g., in passenger cars, ships, power plants, marine offshore platforms, and mining and construction machines. The engine is at heart of these applications, so keeping it in good working condition is vital. Recent technical and computational advances and environmental legislation have stimulated the development of more efficient and robust techniques for the diagnostics of diesel engines. The emphasis is on the diagnostics of faults under development and the causes of engine failure or reduced efficiency. Diesel engine fuel injection plays an important role in the development of the combustion in the engine cylinder. Arguably, the most influential component of the diesel engine is the fuel injection equipment; even minor faults can cause a major loss of efficiency of the combustion and an increase in engine emissions and noise. With increased sophistication (e.g., higher injection pressures) being required to meet continuously improving noise, exhaust smoke, and gaseous emission regulations, fuel injection equipment is becoming even more susceptible to failure. The injection systems have been shown to be the largest contributing factor in diesel engine failures. Extracting the health information of components in the fuel injection system is a very demanding task. Besides the very time-consuming nature of experimental investigations, direct measurements are also limited to selected observation points. Diesel engine faults normally do not occur in a short timeframe. The modeling of typical engine faults, particularly combustion related faults, in a controlled manner is thus vital for the development of diesel engine diagnostics and fault detection. Simulation models based on physical grounds can enlarge the number of studied variables and also obtain a better understanding of localized phenomena that affect the overall behavior of the system. This paper presents a survey of the analysis, modeling, and diagnostics of diesel fuel injection systems. Typical diesel fuel injection systems and their common faults are presented. The most relevant state of the art research articles on analysis and modeling of fluid injection systems as well as diagnostics techniques and measured signals describing the behavior of the system are reviewed and the results and findings are discussed. The increasing demand and effect of legislation related to diagnostics, especially on-board diagnostics (OBD), are discussed with reference to the future progress of this field.

Study of Fuel Temperature Effects on Fuel Injection, Combustion, and Emissions of Direct-Injection Diesel Engines

2008 ◽  
Vol 131 (2) ◽  
Author(s):  
Gong Chen
Keyword(s):  
Diesel Engine ◽  
Diesel Engines ◽  
Temperature Effects ◽  
Liquid Fuel ◽  
Fuel Injection ◽  
Direct Injection ◽  
Injection Rate ◽  
Fuel Temperature ◽  
Injection Parameters ◽  
Medium Speed

The influence of inlet liquid fuel temperature on direct-injection diesel engines can be noticeable and significant. The work in this paper investigates the effects of inlet fuel temperature on fuel-injection in-cylinder combustion, and output performance and emissions of medium-speed diesel engines. An enhanced understanding and simplified modeling of the variations in the main fuel-injection parameters affected by inlet fuel temperature are developed. The study indicates that the main injection parameters affected include the injection timing at the injector end relative to the injection-pump actuation timing, the fuel-injection rate, the fuel-injection duration, and the injection spray atomization. The primary fuel temperature effects on the injection parameters are from the fuel bulk modulus of elasticity and the density with the fuel viscosity less significant as the injector-nozzle flow is usually in a turbulent region. The developed models are able to predict the changes in the injection parameters versus the inlet fuel temperature. As the inlet fuel temperature increases, the nozzle fuel-injection-start timing is predicted to be relatively retarded, the injection rate is reduced, and the needle-lift duration is prolonged from the baseline. The variation trends of the engine outputs and emissions versus fuel temperature are analyzed by considering its consequent effect on in-cylinder combustion processes. It is predicted that raising fuel temperature would result in an increase in each of CO, HC, PM, and smoke emissions, and in a decrease in NOx, and may adversely affect the fuel efficiency for a general type of diesel engine at a full-load condition. The experimental results of the outputs and emissions from testing a medium-speed four-stroke diesel engine agreed with the trends analytically predicted. The understanding and models can be applied to compression-ignition direct-injection liquid fuel engines in general.

scholarly journals MODIFYING MATHEMATICAL MODELS FOR CALCULATING OPERATIONAL CHARACTERISTICS OF DIESEL ENGINES BURNING RME BIOFUELS / MATEMATINIŲ MODELIŲ PRITAIKYMAS DYZELIŲ, DIRBANČIŲ RME BIODEGALAIS, DARBO PROCESUI IR EKSPLOATACINIAMS RODIKLIAMS SKAIČIUOTI / ДОРАБОТКА МАТЕМАТИЧЕСКИХ МОДЕЛЕЙ РАСЧЕТА ПОКАЗАТЕЛЕЙ РАБОТЫ ДИЗЕЛЯ НА БИОДИЗЕЛИНАХ РРМЭ

Transport ◽  
2011 ◽  
Vol 26 (1) ◽  
pp. 50-60 ◽  
Author(s):  
Sergejus Lebedevas ◽  
Galina Lebedeva ◽  
Kristina Bereišienė
Keyword(s):  
Diesel Engine ◽  
Mathematical Modelling ◽  
Mathematical Models ◽  
Diesel Engines ◽  
Fuel Injection ◽  
Internal Heat ◽  
Computer Programs ◽  
Toxic Substances ◽  
Load Range ◽  
Operational Characteristics

The article considers and solves the problems of adapting the mathematical models, used in calculating operational characteristics of diesel engines burning mineral diesel oil, to engines converted to RME biofuels. The analysis of mathematical models of calculating the main technical and economic characteristics of diesel engines as well as the parameters of the in-cylinder process and the concentration of toxic substances in the exhaust gases is performed. The need for adjusting the calculation algorithms is also demonstrated. The computer programs based on single-zone thermodynamic models are used in the research. The programs of mathematical modelling are modified, i.e. supplemented with the algorithm for calculating energy characteristics of the combustion products (e.g. specific heat capacity, internal heat, the lower calorific value, etc.). Based on the computer programs, modified for examining diesel engines burning biofuels, the computer-aided mathematical modelling experiment is carried out. The results of modelling are compared with the data obtained in testing the diesel engine 1A41. The mathematical modelling performed demonstrates the accuracy acceptable for solving practical problems: the difference between the obtained calculation results and diesel engine testing data for the load range of (1.0÷0.5) Pi nom does not exceed ± 5÷7%. Higher accuracy of modelling the characteristics of diesel engines, operating in the low- and medium-load modes, may be accounted for by the adjustment of the algorithm for calculating the induction period and the on-set phase of fuel injection. Santrauka Publikacijoje pateikti dyzelio darbo proceso ir eksploatacinių rodiklių skaičiavimo matematinių modelių tobulinimo rezultatai, siekiant matematinius modelius pritaikyti dyzeliui dirbant riebiųjų rūgščių metilesterių, taip pat RME, biodegalais. Atlikta skaičiavimo algoritmų analizė ir pagrįsti pagrindiniai jų tobulinimo aspektai. Sukurtas kompiuterinis programinis modelis, skirtas darbinio kūno dyzelio cilindre energiniams parametrams skaičiuoti (specifinei šilumai, vidinei energijai), dyzeliui dirbant plačiąja elementinės cheminės sudėties biodegalų gama. Atliktas 1A41 dyzelio techninių ir ekonominių bei ekologinių rodiklių modeliavimas kompiuteriu, naudojant patobulintus matematinius modelius. Parodytas gautų rezultatų, pakankamų praktiniams uždaviniams spręsti, tikslumas: dyzeliui dirbant artimos nominaliosios apkrovos režimais (1,0÷0,5) Pi nom skirtumas tarp skaičiavimo ir dyzelio motorinių tyrimų rezultatų neviršija ±5÷7%. Dyzeliui dirbant mažos apkrovos režimu, matematinio modeliavimo rezultatų adekvatumo didinimas susijęs su kuro įpurškimo fazės bei savaiminio užsiliepsnojimo indukcijos periodo skaičiavimo algoritmo tobulinimu. Резюме Рассмотрены и решены задачи адаптации математических моделей расчета показателей дизеля при переводе их работы с минерального дизелина на биодизелины метилового эфира рапсового масла (МЭРМ). Выполнен анализ и дано обоснование направлений доработки расчетных алгоритмов ряда однозонных термодинамических математических моделей, используемых в практике исследования эксплуатационных показателей, параметров индикаторного процесса и эмиссии токсичных компонентов в выхлопных газах дизелей. В форме программного модуля составлен алгоритм расчета энергетических параметров рабочего тела в цилиндре (удельной теплоемкости, теплоты сгорания, внутренней энергии) для топлив с широким элементарным химическим составом. С использованием доработанных компьютерных программ выполнен широкий расчетный эксперимент и сопоставлены его результаты с данными моторных стендовых испытаний одноцилиндрового отсека дизеля 1А41. Показана приемлемая для решения практических задач точность математического моделирования: для нагрузочных режимов (1÷0,5) Pmi расхождения расчетных и экспериментальных значений параметров работы дизеля не превышают ±5÷7%. Повышение качества моделирования показателей дизеля на режимах средних и малых нагрузок связано с уточнением алгоритма расчета периода индукции и фазы начала видимого горения топлива в цилиндре.

Characteristics of injection of diesel fuel, rapeseed oil and their mixtures in diesel engines of various types

2021 ◽  
pp. 167-178
Author(s):  
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Rapeseed Oil ◽  
High Speed ◽  
Fuel Injection ◽  
Experimental Studies ◽  
Fuel Injector ◽  
High Speed Diesel ◽  
Engine Type

The necessity of adapting diesel engines to work on vegetable oils is justified. The possibility of using rapeseed oil and its mixtures with petroleum diesel fuel as motor fuels is considered. Experimental studies of fuel injection of small high-speed diesel engine type MD-6 (1 Ch 8,0/7,5)when using diesel oil and rapeseed oil and computational studies of auto-tractor diesel engine type D-245.12 (1 ChN 11/12,5), working on blends of petroleum diesel fuel and rapeseed oil. When switching autotractor diesel engine from diesel fuel to rapeseed oil in the full-fuel mode, the mass cycle fuel supply increased by 12 %, and in the small-size high-speed diesel engine – by about 27 %. From the point of view of the flow of the working process of these diesel engines, changes in other parameters of the fuel injection process are less significant. Keywords diesel engine; petroleum diesel fuel; vegetable oil; rapeseed oil; high pressure fuel pump; fuel injector; sprayer

scholarly journals Performance evaluation of common rail direct injection (CRDI) engine fuelled with Uppage Oil Methyl Ester (UOME)

2015 ◽  
Vol 4 (1) ◽  
pp. 1-10 ◽  
Author(s):  
D.N. Basavarajappa ◽  
N. R. Banapurmath ◽  
S.V. Khandal ◽  
G. Manavendra
Keyword(s):  
Diesel Engine ◽  
Methyl Ester ◽  
Diesel Engines ◽  
High Speed ◽  
Alternative Fuels ◽  
High Pressures ◽  
Fuel Injection ◽  
Injection Timing ◽  
Engine Operation ◽  
Performance And Emission

For economic and social development of any country energy is one of the most essential requirements. Continuously increasing price of crude petroleum fuels in the present days coupled with alarming emissions and stringent emission regulations has led to growing attention towards use of alternative fuels like vegetable oils, alcoholic and gaseous fuels for diesel engine applications. Use of such fuels can ease the burden on the economy by curtailing the fuel imports. Diesel engines are highly efficient and the main problems associated with them is their high smoke and NOx emissions.  Hence there is an urgent need to promote the use of alternative fuels in place of high speed diesel (HSD) as substitute. India has a large agriculture base that can be used as a feed stock to obtain newer fuel which is renewable and sustainable. Accordingly Uppage oil methyl ester (UOME) biodiesel was selected as an alternative fuel. Use of biodiesels in diesel engines fitted with mechanical fuel injection systems has limitation on the injector opening pressure (300 bar). CRDI system can overcome this drawback by injecting fuel at very high pressures (1500-2500 bar) and is most suitable for biodiesel fuels which are high viscous. This paper presents the performance and emission characteristics of a CRDI diesel engine fuelled with UOME biodiesel at different injection timings and injection pressures. From the experimental evidence it was revealed that UOME biodiesel yielded overall better performance with reduced emissions at retarded injection timing of -10° BTDC in CRDI mode of engine operation.

Mechanical Validation: An Integral Part of Medium Speed Diesel Engine Development

2003 ◽  
Author(s):  
Klaus Lierz ◽  
Michael Franke ◽  
Jeffrey LeBegue
Keyword(s):  
Diesel Engine ◽  
Mechanical Testing ◽  
Design Stage ◽  
Test Program ◽  
Experimental Development ◽  
Testing Program ◽  
Medium Speed ◽  
Engine Testing ◽  
Engine Development

A comprehensive mechanical testing program was part of the development of the Diesel engine for the GEVO locomotive family. The test program has been developed under consideration of the demands of a railroad application. The program included both fired engine and component rig testing. Component rig tests were used to validate major components early in the design stage. Engine testing included measurements to validate the CAE models and allow detailed experimental development of components and subsystems. Several endurance runs have proven the reliability of the new engine.

Sign in / Sign up

Export Citation Format

Share Document