scholarly journals Non-Gray Radiation Exchange: The Internal Fractional Function Reconsidered

Author(s):  
John H. Lienhard

The radiation fractional function is the fraction of black body radiation below a given value of λT. Edwards and others have distinguished between the traditional, or “external”, radiation fractional function and an “internal” radiation fractional function. The latter is used for simplified calculation of net radiation from a non-gray surface when the temperature of an effectively black source is not far from the surface’s temperature, without calculating a separate total absorptivity. This paper examines the analytical approximation involved in the internal fractional function, with results given in terms of the incomplete zeta function. A rigorous upper bound on the difference between the external and internal emissivity is obtained. Calculations using the internal emissivity are compared to exact calculations for several models and materials. A new approach to calculating the internal emissivity is developed, yielding vastly improved accuracy over a wide range of temperature differences. The internal fractional function can be useful for certain simplified calculations.

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
John H. Lienhard V

The radiation fractional function is the fraction of black body radiation below a given value of λT. Edwards and others have distinguished between the traditional, or “external,” radiation fractional function and an “internal” radiation fractional function. The latter is used for linearization of net radiation from a nongray surface when the temperature of an effectively black environment is not far from the surface's temperature, without calculating a separate total absorptivity. This paper examines the analytical approximation involved in the internal fractional function, with results given in terms of the incomplete zeta function. A rigorous upper bound on the difference between the external and internal emissivity is obtained. Calculations using the internal emissivity are compared to exact calculations for several models and materials. A new approach to calculating the internal emissivity is developed, yielding vastly improved accuracy over a wide range of temperature differences. The internal fractional function should be used for evaluating radiation thermal resistances, in particular.


1. The object of the present paper is to work out an expression for the rate of monomolecular reaction on the basis of the idea that radiation is the cause of such reactions. The whole position of the radiation hypothesis of chemical reactivity up till now has been fully discussed by Harned. I only wish to draw attention to the fact, as pointed out by Langmuir, and Lewis and McKeown, that a great similarity exists between photo-electric emission of electrons and photo-chemical reaction. The true analogue of the thermo-chemical reaction should be sought, however, in the phenomenon of thermionic emission of electrons. It has long been shown experimentally by Richardson and others that the thermionic emission of electrons is vastly in excess of the total photo-electric emission at any temperature T. In the same way we should expect that the amount of thermo-chemical reaction in a system at a given temperature should be greater than the total photo-chemical reaction by black body radiation at the same temperature. Becker has shown that the distribution of velocities among the photo-electrons emitted from a metal by the action of black body radiation at a temperature T is similar to that found amongst the electrons emitted thermally from the hot metal at the same temperature T. It is thus natural to assume that the thermionic emission of electrons from a hot body is really due to the radiation in equilibrium with it. Richardson║ has recently given a very interesting discussion on the photo-electric theory of thermionic emission of electrons. Owing to the well-known difficulties the old view of the freely-moving electrons in a metal has, in recent years, been replaced by that of a lattice structure— a metal being considered to be constituted of interlaced lattices of ions and electrons. Such a view of metallic electrons precludes them from sharing in kinetic energy according to the equipartition law. It is rather more rational to imagine that the metallic electrons do exist in some modified quantum orbits, and are bound to the ions by a certain potential energy. If this view of the electronic structure in metals be accepted, then we have to look to radiation as the only controlling factor in the emission of electrons from hot bodies. The writer has tried to show that the law of thermionic emission derived on the basis of radiative mechanism is in good agreement with experiment. Lewis and McKeown have pointed out that “the concept of matter and radiation being at one and the same temperature means that as a result of absorption and emission, the system as a whole maintains a certain distribution of energy among all frequencies.” If by some process a set of frequencies are removed the system tends to make good the loss by a corresponding reverse process, provided the velocity of the process be not too large to make it physically impossible to keep the system at a fixed temperature by means of a thermostat. In my view the resemblance of photo-electric emission and photo-chemical reaction with thermionic emission and thermo-chemical reaction respectively arises from both kinds of processes being due to radiation. But the distinction lies in the fact that one is due to the action of high temperature radiation on a cold system, while the other is brought about by the action of radiation in temperature equilibrium with the system itself. 2. The Range of Frequencies of Radiation capable of bringing about a Chemical Reaction . Up till now it has been usually assumed that a single frequency, or rather a narrow range of frequencies, is capable of bringing about a chemical change. But experiments have shown that photo-chemical reactions are produced by the action of light of a wide range of frequencies. The simplest of all chemical reactions is the breaking up of atoms into ions and electrons, and it is widely known that the photo-electric action in various elements, both in solid and vapour phase, are brought about by all frequencies of radiation above a certain limiting frequency. The familiar reaction of practical photography is also known to be produced by light of a great variety of wave-lengths. It is, therefore, evident that a more complete theory of chemical reactivity should involve a summation of a number of frequencies, or, what is more plausible, an integration over a whole range of frequencies above a certain limiting value.


Author(s):  
Richard A. Gaggioli

The entropy content of electromagnetic ("black-body") radiation at equilibrium in an enclosure is represented, on a per unit volume basis, by s = [4/3]aT3 and the internal energy content by u = aT4, so s = [4/3]u/T. The entropy transfer rate Sτ associated with emission from the radiation is related to the internal energy trans-fer rate Q by Sτ = Q/T. In both cases, content and flux, the entropy is proportional to energy divided by temperature. But, in one case the proportionality factor is [4/3] and in the other it is unity. The question has been raised, "Why, this difference?" The following develop-ment explains the source of the difference.


2019 ◽  
Vol 50 (4) ◽  
pp. 693-702 ◽  
Author(s):  
Christine Holyfield ◽  
Sydney Brooks ◽  
Allison Schluterman

Purpose Augmentative and alternative communication (AAC) is an intervention approach that can promote communication and language in children with multiple disabilities who are beginning communicators. While a wide range of AAC technologies are available, little is known about the comparative effects of specific technology options. Given that engagement can be low for beginning communicators with multiple disabilities, the current study provides initial information about the comparative effects of 2 AAC technology options—high-tech visual scene displays (VSDs) and low-tech isolated picture symbols—on engagement. Method Three elementary-age beginning communicators with multiple disabilities participated. The study used a single-subject, alternating treatment design with each technology serving as a condition. Participants interacted with their school speech-language pathologists using each of the 2 technologies across 5 sessions in a block randomized order. Results According to visual analysis and nonoverlap of all pairs calculations, all 3 participants demonstrated more engagement with the high-tech VSDs than the low-tech isolated picture symbols as measured by their seconds of gaze toward each technology option. Despite the difference in engagement observed, there was no clear difference across the 2 conditions in engagement toward the communication partner or use of the AAC. Conclusions Clinicians can consider measuring engagement when evaluating AAC technology options for children with multiple disabilities and should consider evaluating high-tech VSDs as 1 technology option for them. Future research must explore the extent to which differences in engagement to particular AAC technologies result in differences in communication and language learning over time as might be expected.


2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.


2019 ◽  
Author(s):  
Le Wang ◽  
Devon Jakob ◽  
Haomin Wang ◽  
Alexis Apostolos ◽  
Marcos M. Pires ◽  
...  

<div>Infrared chemical microscopy through mechanical probing of light-matter interactions by atomic force microscopy (AFM) bypasses the diffraction limit. One increasingly popular technique is photo-induced force microscopy (PiFM), which utilizes the mechanical heterodyne signal detection between cantilever mechanical resonant oscillations and the photo induced force from light-matter interaction. So far, photo induced force microscopy has been operated in only one heterodyne configuration. In this article, we generalize heterodyne configurations of photoinduced force microscopy by introducing two new schemes: harmonic heterodyne detection and sequential heterodyne detection. In harmonic heterodyne detection, the laser repetition rate matches integer fractions of the difference between the two mechanical resonant modes of the AFM cantilever. The high harmonic of the beating from the photothermal expansion mixes with the AFM cantilever oscillation to provide PiFM signal. In sequential heterodyne detection, the combination of the repetition rate of laser pulses and polarization modulation frequency matches the difference between two AFM mechanical modes, leading to detectable PiFM signals. These two generalized heterodyne configurations for photo induced force microscopy deliver new avenues for chemical imaging and broadband spectroscopy at ~10 nm spatial resolution. They are suitable for a wide range of heterogeneous materials across various disciplines: from structured polymer film, polaritonic boron nitride materials, to isolated bacterial peptidoglycan cell walls. The generalized heterodyne configurations introduce flexibility for the implementation of PiFM and related tapping mode AFM-IR, and provide possibilities for additional modulation channel in PiFM for targeted signal extraction with nanoscale spatial resolution.</div>


Author(s):  
Nicholas Manton ◽  
Nicholas Mee

The book is an inspirational survey of fundamental physics, emphasizing the use of variational principles. Chapter 1 presents introductory ideas, including the principle of least action, vectors and partial differentiation. Chapter 2 covers Newtonian dynamics and the motion of mutually gravitating bodies. Chapter 3 is about electromagnetic fields as described by Maxwell’s equations. Chapter 4 is about special relativity, which unifies space and time into 4-dimensional spacetime. Chapter 5 introduces the mathematics of curved space, leading to Chapter 6 covering general relativity and its remarkable consequences, such as the existence of black holes. Chapters 7 and 8 present quantum mechanics, essential for understanding atomic-scale phenomena. Chapter 9 uses quantum mechanics to explain the fundamental principles of chemistry and solid state physics. Chapter 10 is about thermodynamics, which is built around the concepts of temperature and entropy. Various applications are discussed, including the analysis of black body radiation that led to the quantum revolution. Chapter 11 surveys the atomic nucleus, its properties and applications. Chapter 12 explores particle physics, the Standard Model and the Higgs mechanism, with a short introduction to quantum field theory. Chapter 13 is about the structure and evolution of stars and brings together material from many of the earlier chapters. Chapter 14 on cosmology describes the structure and evolution of the universe as a whole. Finally, Chapter 15 discusses remaining problems at the frontiers of physics, such as the interpretation of quantum mechanics, and the ultimate nature of particles. Some speculative ideas are explored, such as supersymmetry, solitons and string theory.


Author(s):  
Anthony Duncan ◽  
Michel Janssen

This is the first of two volumes on the genesis of quantum mechanics. It covers the key developments in the period 1900–1923 that provided the scaffold on which the arch of modern quantum mechanics was built in the period 1923–1927 (covered in the second volume). After tracing the early contributions by Planck, Einstein, and Bohr to the theories of black‐body radiation, specific heats, and spectroscopy, all showing the need for drastic changes to the physics of their day, the book tackles the efforts by Sommerfeld and others to provide a new theory, now known as the old quantum theory. After some striking initial successes (explaining the fine structure of hydrogen, X‐ray spectra, and the Stark effect), the old quantum theory ran into serious difficulties (failing to provide consistent models for helium and the Zeeman effect) and eventually gave way to matrix and wave mechanics. Constructing Quantum Mechanics is based on the best and latest scholarship in the field, to which the authors have made significant contributions themselves. It breaks new ground, especially in its treatment of the work of Sommerfeld and his associates, but also offers new perspectives on classic papers by Planck, Einstein, and Bohr. Throughout the book, the authors provide detailed reconstructions (at the level of an upper‐level undergraduate physics course) of the cental arguments and derivations of the physicists involved. All in all, Constructing Quantum Mechanics promises to take the place of older books as the standard source on the genesis of quantum mechanics.


Sign in / Sign up

Export Citation Format

Share Document